I'm developing some reports for Main Page in Dynamics Ax, however the problem i've got is connected with SSRS. Typical scenario i have report A and report B, i need to open report A when clicking on report B. Opening report itself is correct, but passing parameters is more tricky. After some research i got to the point when I want to run report A in browser using the adress
http://(server address)/Reports/Pages/Report.aspx?ItemPath=/Dynamics/Reports.VendorsOpenTransactionsCount.AutoDesign1&rs:Command=Render&VendOpenTrans_dataAreaID=dor&VendOpenTrans_p1=2011-07-21&VendOpenTrans_p2=2011-07-21
and then i get report displayed(main window) but non of the parameters are validated into proper textboxes, and changing the value of them doesn't have any impact.
can anyone here help me with that "challenge"
Actually, I believe the critical difference is whether you are passing parameters (via URL) to a report that is using database engine or the SSAS - the analytical engine as a data source.
If your data source is the analytical engine then your parameter should be given in the 'dimension format', rather than in the precise format, like &parmname=140, etc. Allow me to explain using specific example and using SSAS data source for this illustration (there is plenty of solutions available on the net for the database engine based solution, including Microsoft postings).
My server name is FRELASM.
So, I have SSAS data source called DealerSource (not visible here).
I have parameter defined in the parameter's section of the SSRS as: #DwDimDealerCorpDlrNbr
In SSAS I have the following dimension:
[Dw dim Dealer] that has attribute: [Corp Dlr Nbr] ==> giving: [Dw dim Dealer].[Corp Dlr nbr]
What I want is to show a report for a single dealer 'number' (but it is a text field, hence the leading zeros) equal to 00140. So, I am looking for Corporate dealer number=00140.
The parameter passing DOES NOT WORK if I use this [this would be find against database engine, but it does not work with SSAS).
What you need is this:
replace constant 00140 with [dimension].[attribute].[value]
do not use & character, rather replace it with: %26.
So, the working version is this.
Can you take a look at this page: http://msdn.microsoft.com/en-us/library/ms155391.aspx
It explains about when you can pass parameters via URL. Maybe your parameters are not set to Prompt for user input. HTH.
Related
Is it possible in SAP PI parameterized mapping to get the value from a field in graphical message mapping and send that value in Java Mapping?
I have a scenario where I am getting the email list from S/4HANA system in graphical mapping but I want to use that email value in the Java Mapping which is another mapping in this scenario. I tried parameter binding but neither the import or export type of parameter is useful in this scenario since none of them can store value.
Kindly let me know if it is possible to achieve or is there any other way to get it in SAP PI system.
Not sure if parameters would be your best bet here. They are mainly intended to insert some values on configuration time into mapping at runtime.
You may want to have a look at "using global variables" like here https://blogs.sap.com/2014/10/17/how-to-use-global-variable-in-sap-pi-mapping/
One solution portrayed there is to use the "Edit Java Sections" function within graphical message mapping.
Please beware that I haven't actually tried this, so YMMV
I am trying to find the correct template and id to use for a hotprint of an advanced pdf template of an Item Fulfillment.
The hot print url is (with the id bolded) https://system.na3.netsuite.com/app/accounting/print/hotprint.nl?regular=T&sethotprinter=T&id=7600&label=Packing%20Slip&printtype=packingslip&trantype=itemship&orgtrantype=TrnfrOrd&auxtrans=7605
For some reason only certain id=# seems to affect the outcome and the ids I have got to work for two different templates don't match the Custom Transaction Forms ID or the Advanced pdf script id. (example most ids=template 1, while 168,4954, and seemingly random other ids=template 2) I am very confused on how netsuite resolves the hot print url as it normally doesn't include the template= part though I have seen others use it for invoice print urls.
The parameters at the end of the url (the stuff after the ?) are used by Netsuite to control settings used by the webpage which prints the PDFs for you.
In this case, &id=##### refers to the internal id of the document you are printing. You can see this by going to the document, right clicking, selecting inspect, and typing nlapiGetRecordId() into the console. When you click Print, you should see that same number after &id=#####.
&template=### refers to the template you are printing. If you go to Customization -> Forms -> Advanced PDF/HTML Templates, you'll notice a Script ID field in the table. If you substitute the correct Script ID in for the number in &template=###, you'll notice you generate the same PDF. This Script ID acts the same as the number that was previously there.
The reason you're seeing unusual results when you change those numbers is because you're mismatching a record with a template not built for it. So it won't print exactly right, but will sometimes execute anyways.
Anyways, this sort of parameter scheme is a similar scheme to how Suitelets and Restlets work, so in the future, you might experience this sort of thing again.
EDIT: For those reading this in the future, please read the comments.
To customize a packing slip and return form:
If you are printing packing slips and need some customization, you can use a custom invoice form when printing packing slips. For example, you can customize an invoice form to hide the fulfilled item tax rate and amount, and the order total. Then, when you print the packing slip using the custom form through mass print, choose the the packing slip shows the customized information.
I am pretty new to Cumulocity and I am trying to get data into the platform from my own device using mqtt and the smartrest templates. I can get data in using the static templates but they only support certain data types. I am struggling to create the appropriate smartrest template in the UI and the documentation doesn't go into much detail.
I get that the template name goes in the MQTT topic (or selected on login as part of the username) in s/ut/template_name and the messageId of the messages in the template get matched to the first CSV field of the MQTT publish payload. What I don't get is the template terminology. In the UI I choose API->Measurement and Method->POST and I am presented with required values $.type and $.time. My questions:
Is $.type the "measurement fragment type" name or do I have to make it "c8y_CustomMeasurement"? Can I call it whatever I want?
$.time has a value field. Is this the default value if one is not supplied in the publish?
I assume I need to add a numerical value in the optional API values. To link it to the value of the data point should I make the key "c8y_CustomMeasurement.custom.value"?
Am I way off base here?
Every time I publish to my own smartrest template the server drops the connection so I assume its an error in my template setup but I don't see a way of accessing debug messages (also nothing is published back to me on s/e or s/dt).
For the sake of an example, lets say I wish to publish a unitless, timestamped pulse count with payload format "mId,ts,value" with example data "p01,'2017-07-17 12:34:00',1234"
What you wrote so far is mostly correct just to be a bit more precise:
The topic is s/uc/template_id (not the template name, this is just a label)
The $.type refers to the 'type' fragment in the measurement JSON. It is a free text field
In 99% of cases you want to leave the $.time empty. If you set something here it is not the default but fixed to that timestamp and you cannot change it when using the template. If you leave it empty and still not send something in
Example: p01,2017-07-17T12:34:00,1234 (no quotes arounf timestamp and ISO8601 format
Example without sending time: p01,,1234 (sending empty string as time results in server time beeing set. The template is the same)
Hope these points help you to find you issue
The scenario:
I have an ApEx page which pulls a record from a table. The record contains an id, the name of the chart (actually a filename) and the code for an image map as an NVARCHAR2 column called image_map.
When I render the page I have an embedded HTML region which pulls the image in using the #WORKSPACE_IMAGES#&P19_IMAGE. substitution as the src for the image.
Each chart has hot spots (defined in the image_map html markup) which point to other charts on the same ApEx page. I need to embed the:
Application ID (like &APP_ID.)
Session (like &APP_SESSION.)
My problem:
When I try to load the &APP_ID as part of the source into the database it pre-parses it and plugs in the value for the ApEx development app (e.g. 4500) instead of the actual target application (118).
Any help would be greatly appreciated.
Not a lot of feedback - guess I'm doing something atypical?
In case someone else is trying to do this, the workaround I ended up using was to have a javascript run and replace some custom replacement flags in the urls. The script is embedded in the template of the page and assigns the APEX magic fields to local variables, e.g.:
var my_app_id = '&APP_ID';
Not pretty, but it works...
Ok - I think I've left this open long enough... In the event that anyone else is trying to (mis)use apex in a similar way, it seems like the "apex way" is to use dynamic actions (which seem stable from 4.1.x) and then you can do your dynamic replace from there rather than embedding js in the page(s) themselves.
This seems to be the most maintainable, so I'll mark this as the answer - but if someone else has a better idea, I'm open to education!
I found it difficult to set a dynamic URL on a link to another page - directly - attempting to include the full URL as an individual link target doesn't work, at least in my simplistic world, I'm not an expert (as AJ said: any wisdom appreciated).
Instead, I set individual components of the url via the link, and a 'Before Header' PL/SQL process on the targeted page to combine the elements into a full url and assign it to the full url page-item:
APEX_UTIL.set_session_state(
'PG_FULL_URL',
'http...'||
v('PG_URL_COMPONENT1')||
v('PG_URL_COMPONENT2')||
'..etc..'
);
...where PG_FULL_URL is an item of Type 'Display Image', 'Based On' 'Image URL stored in Page Item Value'.
This is Apex 5.1 btw, I don't know if some of these options are new in this release.
I've read the documentation, but what I need to know is:
I'm not using a fictitious stock quote service (with an imaginary wsdl file). I'm using a different service with a different name.
Where, among the thousands and thousands of lines of code that have been generated, will I find the Scala trait(s) that I need to put together that correspond to this line in the documentation's example:
val service = (new stockquote.StockQuoteSoap12Bindings with scalaxb.SoapClients with scalaxb.DispatchHttpClients {}).service
Now, you might be thinking "Why not just search for Soap12Bindings in the generated code"? Good idea - but that turns up 0 results.
The example in the documentation is outdated, or too specific. (The documentation is also internally inconsistent and inconsistent with the actual filenames output with scalaxb.)
First, search for SoapBindings instead of Soap12Bindings to find the service-specific trait (the first trait).
Then, instead of scalaxb.SoapClients, use scalaxb.Soap11Clients.