As I know, heaps such as malloc is stored in dynamic data. But is it right to say
that malloc function call may allocate the memory space in stack area?
malloc is not a feature of MARS or QtSpim.
There is a system call, #9, that mimics *nix sbrk, to allocate additional address space to the simulated process. It returns to you the next address available past the global data (and past any prior sbrk's). (However, it only allocates, and does not return memory the way a proper sbrk would do given a negative value.) Another name for this area of memory is heap / heap memory.
It does not allocate stack space as that is in substantially higher in the address space. On these simulators, the stack is limited to about 4MB, and the memory returned by sbrk does not reach anywhere near into that 4MB.
Heap memory is useful since a heap allocated memory will survive a function call — a function can return data in the heap but cannot return newly allocated data in the stack, since, by definition, a function that allocates stack space must release that exact same amount when it leaves.
Stack space is allocated simply by decrementing the stack pointer (and released by incrementing the stack pointer). By convention, all functions & subroutines agree to leave existing stack memory alone and allocate new stack memory if they want it, though they also must release it before returning to their caller. When those restrictions do not meet requirements, heap memory is a good choice. Global data is also an option for memory that survives a function call, though that can lead to problems with multithreading (and potentially with recursion).
In the following procedure, will the array be allocated on the stack?
procedure One:
var
arr: array[0..1023] of byte;
begin
end;
What is the largest item that can go on the stack?
Is there a speed difference between accessing variable on the stack and on the heap?
In the following procedure, will the array be allocated on the stack?
Yes, provided that the local variable is not captured by an anonymous method. Such local variables reside on the heap.
What is the largest item that can go on the stack?
It depends on how large the stack is, and how much of the stack has already been used, and how much of the stack is used by calls made by the function itself. The stack is a fixed size, determined when the thread is created. The stack overflows if it grows beyond that size. On Windows at least, the default stack size is 1MB, so I would not expect you to encounter problems with a 1KB array as can be seen here.
Is there a speed difference between accessing variable on the stack and on the heap?
By and large no, but again this depends. Variables on the stack are probably more likely to be accessed frequently, and so probably easier to be cached. But for a decently sized object, like the 1KB array we can see here, I would not expect there to be any difference in access time. In terms of the underlying memory architecture, there's no difference between stack and heap, it's all just memory.
Now, where there is a difference in performance is in allocation. Heap allocation is more expensive than stack allocation. And especially if you have a multi-threaded application, heap allocation can be a bottleneck. In particular, the default Delphi memory manager does not scale well in multi-threaded use.
I am reading about heap and stack usage and I have a question about the heap and the dynamically allocated memory.
How/where the heap memory used by an application is known to be used or availabe?
What I always see in an explanation of dynamic allocation is something like this :
int *p;
p = (int*)malloc(sizeof(int));/* A space in the heap is allocated to store an int*/
p = (int*)malloc(sizeof(int));/* p now points to another space in the heap ; the first allocated space is lost, causing a memory leak*/
I understand the /* comments */ I wrote in the code but I don't clearly understand that the first space is "lost" so I came up with two ideas:
everytime there is a dynamic allocation, "something" must keep track of the space reserved in memory (address of the first byte and the size of the space allocated) : something like a list that is updated at each dynamic allocation.
or is there some sort of a flag for each byte saying that it is free or used by an application.
In this way, a call to the free function would, for the first idea, update the list by removing the address of the bytes or for the second one change the flags.
Thank you for your time.
I am trying to find some useful information on the malloc function.
when I call this function it allocates memory dynamically. it returns the pointer (e.g. the address) to the beginning of the allocated memory.
the questions:
how the returned address is used in order to read/write into the allocated memory block (using inderect addressing registers or how?)
if it is not possible to allocate a block of memory it returns NULL. what is NULL in terms of hardware?
in order to allocate memory in heap we need to know which memory parts are occupied. where this information (about the occupied memory) is stored (if for example we use a small risc microcontroller)?
Q3 The usual way that heaps are managed are through a linked list. In the simplest case, the malloc function retains a pointer to the first free-space block in the heap, and each free-space block has a header that points to the next free space block in the heap. So the heap is in-effect self-defining in terms of knowing what is not occupied (and by inference what is therefore occupied); this minimizes the amount of overhead RAM needed to manage the heap.
When new space is needed via a malloc call, a large enough free-space block is found by traversing the linked list. That found free-space block is given to the malloc caller (with a small hidden header), and if needed a smaller free-space block is inserted into the linked list with any residual space between the original free space block and how much memory the malloc call asked for.
When a heap block is released by the application, its block is just formatted with the linked-list header, and added to the linked list, usually with some extra logic to combine consecutive free-space blocks into one larger free-space block.
Debugging versions of malloc usually do more, including retaining linked-lists of the allocated areas too, "guard zones" around the allocated heap areas to help detect memory overflows, etc. These take up extra heap space (making the heap effectively smaller in terms of usable space for the applications), but are extremely helpful when debugging.
Q2 A NULL pointer is effectively just a zero, which if used attempts to access memory starting at location 0 of RAM, which is almost always reserved memory of the OS. This is the cause of a significant quantity of memory violation aborts, all caused by programmer's lack of error checking for NULL returns from functions that allocate memory).
Because accessing memory location 0 by a non-OS application is never what is wanted, most hardware aborts any attempt to access location 0 by non-OS software. Even with page mapping such that the applications memory space (including location 0) is never mapped to real RAM location 0, since NULL is always zero, most CPUs will still abort attempts to access location 0 on the assumption that this is an access via a pointer that contains NULL.
Given your RISC processor, you will need to read its documentation to see how it handles attempts to access memory location 0.
Q1 There are many high-level language ways to use allocated memory, primarily through pointers, strings, and arrays.
In terms of assembly language and the hardware itself, the allocated heap block address just gets put into a register that is being used for memory indirection. You will need to see how that is handled in the RISC processor. However if you use C or C++ or such higher level language, then you don't need to worry about registers; the compiler handles all that.
Since you are using malloc, can we assume you are using C?
If so, you assign the result to a pointer variable, then you can access the memory by referencing through the variable. You don't really know how this is implemented in assembly. That depends on CPU you are using. malloc return 0 if it fails. Since usually NULL is defined as 0, you can test for NULL. You don't care how malloc tracks the free memory. If you really need this information, you should look at the source in glibc/malloc available on the net
char * c = malloc(10); // allocate 10 bytes
if (c == NULL)
// handle error case
else
*c = 'a' // write a in the first character on the block
Ok, I asked the difference between Stackoverflow and bufferoverflow yesterday and almost getting voted down to oblivion and no new information.
So it got me thinking and I decided to rephrase my question in the hopes that I get reply which actually solves my issue.
So here goes nothing.
I am aware of four memory segments(correct me if I am wrong). The code, data, stack and heap. Now AFAIK the the code segment stores the code, while the data segment stores the data related to the program. What seriously confuses me is the purpose of the stack and the heap!
From what I have understood, when you run a function, all the related data to the function gets stored in the stack and when you recursively call a function inside a function, inside of a function... While the function is waiting on the output of the previous function, the function and its necessary data don't pop out of the stack. So you end up with a stack overflow. (Again please correct me if I am wrong)
Also I know what the heap is for. As I have read someplace, its for dynamically allocating data when a program is executing. But this raises more questions that solves my problems. What happens when I initially initialize my variables in the code.. Are they in the code segment or in the data segment or in the heap? Where do arrays get stored? Is it that after my code executes all that was in my heap gets erased? All in all, please tell me about heap in a more simplified manner than just, its for malloc and alloc because I am not sure I completely understand what those terms are!
I hope people when answering don't get lost in the technicalities and can keep the terms simple for a layman to understand (even if the concept to be described is't laymanish) and keep educating us with the technical terms as we go along. I also hope this is not too big a question, because I seriously think they could not be asked separately!
What is the stack for?
Every program is made up of functions / subroutines / whatever your language of choice calls them. Almost always, those functions have some local state. Even in a simple for loop, you need somewhere to keep track of the loop counter, right? That has to be stored in memory somewhere.
The thing about functions is that the other thing they almost always do is call other functions. Those other functions have their own local state - their local variables. You don't want your local variables to interfere with the locals in your caller. The other thing that has to happen is, when FunctionA calls FunctionB and then has to do something else, you want the local variables in FunctionA to still be there, and have their same values, when FunctionB is done.
Keeping track of these local variables is what the stack is for. Each function call is done by setting up what's called a stack frame. The stack frame typically includes the return address of the caller (for when the function is finished), the values for any method parameters, and storage for any local variables.
When a second function is called, then a new stack frame is created, pushed onto the top of the stack, and the call happens. The new function can happily work away on its stack frame. When that second function returns, its stack frame is popped (removed from the stack) and the caller's frame is back in place just like it was before.
So that's the stack. So what's the heap? It's got a similar use - a place to store data. However, there's often a need for data that lives longer than a single stack frame. It can't go on the stack, because when the function call returns, it's stack frame is cleaned up and boom - there goes your data. So you put it on the heap instead. The heap is a basically unstructured chunk of memory. You ask for x number of bytes, and you get it, and can then party on it. In C / C++, heap memory stays allocated until you explicitly deallocate. In garbage collected languages (Java/C#/Python/etc.) heap memory will be freed when the objects on it aren't used anymore.
To tackle your specific questions from above:
What's the different between a stack overflow and a buffer overflow?
They're both cases of running over a memory limit. A stack overflow is specific to the stack; you've written your code (recursion is a common, but not the only, cause) so that it has too many nested function calls, or you're storing a lot of large stuff on the stack, and it runs out of room. Most OS's put a limit on the maximum size the stack can reach, and when you hit that limit you get the stack overflow. Modern hardware can detect stack overflows and it's usually doom for your process.
A buffer overflow is a little different. So first question - what's a buffer? Well, it's a bounded chunk of memory. That memory could be on the heap, or it could be on the stack. But the important thing is you have X bytes that you know you have access to. You then write some code that writes X + more bytes into that space. The compiler has probably already used the space beyond your buffer for other things, and by writing too much, you've overwritten those other things. Buffer overruns are often not seen immediately, as you don't notice them until you try to do something with the other memory that's been trashed.
Also, remember how I mentioned that return addresses are stored on the stack too? This is the source of many security issues due to buffer overruns. You have code that uses a buffer on the stack and has an overflow vulnerability. A clever hacker can structure the data that overflows the buffer to overwrite that return address, to point to code in the buffer itself, and that's how they get code to execute. It's nasty.
What happens when I initially initialize my variables in the code.. Are they in the code segment or in the data segment or in the heap?
I'm going to talk from a C / C++ perspective here. Assuming you've got a variable declaration:
int i;
That reserves (typically) four bytes on the stack. If instead you have:
char *buffer = malloc(100);
That actually reserves two chunks of memory. The call to malloc allocates 100 bytes on the heap. But you also need storage for the pointer, buffer. That storage is, again, on the stack, and on a 32-bit machine will be 4 bytes (64-bit machine will use 8 bytes).
Where do arrays get stored...???
It depends on how you declare them. If you do a simple array:
char str[128];
for example, that'll reserve 128 bytes on the stack. C never hits the heap unless you explicitly ask it to by calling an allocation method like malloc.
If instead you declare a pointer (like buffer above) the storage for the pointer is on the stack, the actual data for the array is on the heap.
Is it that after my code executes all that was in my heap gets erased...???
Basically, yes. The OS will clean up the memory used by a process after it exits. The heap is a chunk of memory in your process, so the OS will clean it up. Although it depends on what you mean by "clean it up." The OS marks those chunks of RAM as now free, and will reuse it later. If you had explicit cleanup code (like C++ destructors) you'll need to make sure those get called, the OS won't call them for you.
All in all, please tell me about heap in a more simplified manner than just, its for malloc and alloc?
The heap is, much like it's name, a bunch of free bytes that you can grab a piece at a time, do whatever you want with, then throw back to use for something else. You grab a chunk of bytes by calling malloc, and you throw it back by calling free.
Why would you do this? Well, there's a couple of common reasons:
You don't know how many of a thing
you need until run time (based on
user input, for example). So you
dynamically allocate on the heap as
you need them.
You need large data structures. On
Windows, for example, a thread's
stack is limited by default to 1
meg. If you're working with large
bitmaps, for example, that'll be a
fast way to blow your stack and get
a stack overflow. So you grab that
space of the heap, which is usually
much, much larger than the stack.
The code, data, stack and heap?
Not really a question, but I wanted to clarify. The "code" segment contains the executable bytes for your application. Typically code segments are read only in memory to help prevent tampering. The data segment contains constants that are compiled into the code - things like strings in your code or array initializers need to be stored somewhere, the data segment is where they go. Again, the data segment is typically read only.
The stack is a writable section of memory, and usually has a limited size. The OS will initialize the stack and the C startup code calls your main() function for you. The heap is also a writable section of memory. It's reserved by the OS, and functions like malloc and free manage getting chunks out of it and putting them back.
So, that's the overview. I hope this helps.
With respect to stack... This is precicely where the parameters and local variables of the functions / procedures are stored. To be more precise, the params and local variables of the currently executing function is only accessible from the stack... Other variables that belong to chain of functions that were executed before it will be in stack but will not be accessible until the current function completed its operations.
With respect global variables, I believe these are stored in data segment and is always accessible from any function within the created program.
With respect to Heap... These are additional memories that can be made allotted to your program whenever you need them (malloc or new)... You need to know where the allocated memory is in heap (address / pointer) so that you can access it when you need. Incase you loose the address, the memory becomes in-accessible, but the data still remains there. Depending on the platform and language this has to be either manually freed by your program (or a memory leak occurs) or needs to be garbage collected. Heap is comparitively huge to stack and hence can be used to store large volumes of data (like files, streams etc)... Thats why Objects / Files are created in Heap and a pointer to the object / file is stored in stack.
In terms of C/C++ programs, the data segment stores static (global) variables, the stack stores local variables, and the heap stores dynamically allocated variables (anything you malloc or new to get a pointer to). The code segment only stores the machine code (the part of your program that gets executed by the CPU).