I am running VSTS/TFS extension developed by me and trying to display summary with data generated with extension once the Build/release completes, in build/release summary tabs .I am getting below message while trying to display my report in VSTS/TFS , Build/release summary tab
"****Extension Name Here**** is taking longer than expected to load. Learn More about this extension, including available support options. "
At times when I refresh my page this message get disappear and load expected data on summary tab
I have tried to find reason for this message with aid on online content but no clue found. Please be kind enough to provide some tips to get rid of this message and display data.
This happened in some of my extensions, too.
I solved it by loading the contents of the page asynchronously.
The initial page should load very fast. The processing of the data and following display of the results is only started when the page is loaded. When the processing is done, the contents of the page get updated. I did this by using an MVVM-like behavior with knockout.
Related
I had been happily using Java live reload while debugging my Vaadin application over the past few months.
Today, after I started my browser and directed it to my locally running Vaadin application I got a popup in the lower right corner stating:
Java live reload unavailable. Live reload for Java changes is currently not set up. Find out how to make use of this functionality to boost your workflow. Read more
Clicking onto the read more link (pointing to 'https://vaadin.com/docs/v14/flow/workflow/workflow-overview') just brings me to a "404 Page Not Found" error page.
So - two or actually three questions:
what could cause my live-reload functionality go missing? I am using MS Edge and the Live-reload plugin is enabled (and it used to work until yesterday).
where has the page gone explaining how to set that up?
and finally: Any idea, what to check or fix to get this working again? I consider that pretty essential functionality for efficient UI development!
For question 2, you can find the documentation here: https://vaadin.com/docs/v14/guide/live-reload
I'm using Visual Studio 16.4.5 with SSRS 15.0.1659.0
Currently, I'm trying to pass a URL in native mode with three parameters:
="https://reporting/ReportServer?/Production/Equipment/Prime%20On%20Rent%20No%20Shipper&AttachmentOption=N&Store=" & Fields!StoreNumber.Value & "&Division=" & Parameters!Division.Value
Every time I click the resulting box on the server side, I get:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
I've tried wrapping it in javascript, even though I don't want to use javascript for this. I just want to be able to open the target report with the parameters in it. What am I doing wrong?
So, a couple of things:
I had the wrong alias for one of the tables in my query, so it couldn't be found.
I had to make the two initial variables accept multiple values so that I could join them in the final URL.
Once I fixed those issues, it worked!
Bit of a long one...
I am trying to reliably export data from Avaya CMS, currently the set up I am using is a Win 2012 Server with Avaya CMS Superviser R18 installed. I have 5 report scripts which I run and they export data to a individual csv files every 3 - 5 seconds. This way was sufficient while we were using CMS Superviser R17 as it would only crash once a day, and when it did, the csv files would stop updating which triggered an email to me once the files had been 120 seconds without updating. This ensured that the reports had very little downtime as I could just quickly restart CMS superviser and the scripts (batch file) rather than having to wait for someone to report that it was no longer updating.
However with CMS SUperviser R18, the software doesn't seem to crash, instead the csv files keep getting updated, but with incorrect data. I am still trying to troubleshoot that issue to find out exactly what is causing it to go out of whack, but while that is ongoing I am also trying to look at alternative solutions.
The reports I am trying to export are custom reports that others in the company have created, and they appear under the designer category
I looked at CLINT but I cannot see the reports I am looking for in there so I ssh'd into the server and using xterm terminal I can view the CMS menus and go through them. In here I noticed that you cannot view any reports under the Integrated tab, nor any reports under the Designer Category of the Real-Time or Historical tabs. I also noticed that there is a "custom reports" section in the menu, although I see no reports under this menu item, just two empty categories (Real-time and Historical)(Pics attached)
So my questions are:
1 Do you know if "Custom Reports" is where reports from the designer category should show up? If not, do you know is it possible to access those reports through the ssh menu at all?
2 Has anyone any other ideas as to how to export the data from CMS to a csv file?
Thank you for your time.
The "Custom Reports" in the cms menu you show on the screenshots is different to "Reports" in the Supervisor.
You can read about Custom Reports here (a little old, but still relevant):
https://downloads.avaya.com/elmodocs2/multivantage/215822_3/215822_3_1_CMS_Reports.pdf
If you create reports in the "Custom Reports" subsystem then you can run them using /cms/toolsbin/clint. Note that you must recreate the "Reports" reports in the "Custom Reports" to be able to run them through clint.
You can create command files so you can script clint, then you just have to run it with a scheduler. You can read about scriping clint here:
http://www.tek-tips.com/viewthread.cfm?qid=397058
You can also establish a direct connection to the Informix database on CMS but you can not access real-time data there.
I am looking for the physical location of the TFS workflow log. Not the MSBuild Log but the log you see when you click "View Log".
I have read in other forums that the log is stored in an SQL database. But which database is it and specifically what table?
Thanks. Hope someone knows the answer to this.
The entire build log can be found in the Tfs_YourTeamProjectCollection database in the Tbl_BuildInformation. The Tbl_BuildInformation table contains self referencing entries to preserve the build log hierarchy, and all the build information is saved in XML. The information is saved as different node types which correspond to different build activities.
If you are interested in going down that route, I go into a little more detail in my blog. It is a bit much to post here.
You can view the log file by using the TFS web access link. See this MSDN post for more details. I just used this trick and it was fantastic. http://social.msdn.microsoft.com/Forums/en/tfsbuild/thread/14ce49ea-f61a-45e2-be32-beffc81ce415?prof=required
Another way to view the log is via the web access(right click on the build output tab and choose "copy full path" and paste it onto a browser) and the log does get downloaded so you can scroll down quickly.
The build log is a different view of the full which by default can be found under the [build location][Build name]\logs directory.
You can retrieve the list of log locations from the database by querying tbl_Build table in the Tfs_<CollectionName> database, e.g.:
SELECT [BuildId],[StartTime],[FinishTime],[LogLocation]
FROM [Tfs_DefaultCollection].[dbo].[tbl_Build]
I have configured TFS 2010, but when I try to load the project dashboard for a team project, it returns a reporting service error so I am not able to see the "Task Burndown (hours)" and " Burn Rate (hours/day)". Other parts of the page are working fine.
The error is as:
An error has occurred during report processing. (rsProcessingAborted) Get Online Help
Cannot impersonate user for data source 'TfsReportDS'. (rsErrorImpersonatingUser) Get Online Help
Log on failed. (rsLogonFailed) Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors
I got resolution finally....
Go to analysis service.
You will see database named as TFS_Analysis.
Go to Roles node.
View properties of "TfsWarehouseDataReader".
Click on Data Sources.
Now you will see Tfs_AnalysisDataSource.
Change access to "Read" and check "Read Definition" box. Now Click OK and You are Done.
The main problem was with SCHEMA CONFLICTS.
First identify which fields are causing schema conflicts, invoke GetWarehouseStatus and observe the XML which fields got conflicted, and in which collection. once you found the filed names then rename the fields with the help of below link.
geekswithblogs.net/Natalia/Default.aspx
msdn.microsoft.com/en-us/library/ee921480(v=VS.100).aspx
then rebuild your warehouse from tfs admin console, take a back up of old database in sql database and delete it .wait for some time (depends on warehouse time to refresh the cube or check the GetWarehouseStatus next day and check the xml ). to check this use below link
type //localhost:8080/tfs/TeamFoundation/Administration/v3.0/WarehouseControlService.asmx?op=GetProcessingStatus
I spend lot of time to resolve this issue, that's why posting the solution here, this may help some one... any queries related schema conflicts and Reporting services feel free to post me... iam not a expert but for sure i can help you out in this issues....
Please use Mark as Answer if my post solved your problem and use Vote As Helpful if a post was useful.