I am trying to run my first Grails app and I am getting a error when I try to go to localhost:8080. It just refuses to connect.
I followed Dan Vega's instructions in his video https://www.youtube.com/watch?v=PlMyRGIJNa0 carefully but I cannot get my app to run.
I have tried to change the host but couldn't get to the right place to do so. Any help would be much appreciated.
You can change you server port. You need to add in application.yml as follow to run
server:
port: 8181
Related
I'm trying to see my Ruby on Rails app on my localhost, when I run rails server it looks like it is running good with no errors but when I open up my localhost at http://localhost:3000/ it redirects me to https://localhost:8080/ and says refuses to connect. I am able to open my localhost files with no problems but when I run rails server and open localhost with the port it redirects me to https instead of http no matter what I do. I even tried running with different ports. I am on Ubuntu and my app is using Puma.
I have done the following so far:
Cleared all my cache & history
Opened incognito window
Ran rails server with different ports
Changed some about:config settings to false in firefox
Have searched localhost in 'chrome://net-internals/#hstsand' but says not found
I've tried the other solutions on this link: Google Chrome redirecting localhost to https
None have worked at all. What could the problem be?
I get this error on Chrome
And this error on Firefox
Any advice on this helps! Thanks.
EDIT: Let me know if this needs to be changed, this is how I have my
etc/host/ set up
After scrolling through posts and much research my issue was that I did not run yarn before running rails server. I found this post and referred to this answer https://stackoverflow.com/a/58369306/14365156
But I did not follow those steps exactly, I only ran yarn then ran rails server and now am finally able to view http://localhost:3000/. Hopefully this helps others!
I am using DDEv and Docker with Windows 10 pro to set up a localhost install of drupal 8.8 using Composer. I have set up and configured the local drupal installation (it is a fresh install) and it appears to be running correctly, but in the admin section of the drupal site I receive a warning to change write permissions of sites/default/settings.php.
I tried to change settings using Filezilla, but it appears that local files in Filezilla do not provide access to write permissions? When I right-click the file in Filezilla, no permissions option appears.
Following troubleshooting tips from ddev, I tried to access phpmyadmin at https://mysitename.ddev.site:8036
Instead of loading phpmyadmin, I got the following error message:
Secure Connection Failed
An error occurred during a connection to dmckimep.ddev.site:8036. SSL received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
I've been searching around for a couple of hours now and do not find a solution to this. I ran ddev describe and all seems fine with the installation. The drupal site in the container seems to run okay. There are no port conflicts present so far as I have found, so I am not sure why I cannot get access to phpmyadmin.
I am a relative newbie in terms of skills, but have successfully maintained drupal 4-7 on localhost with XAMPP and my web host. Now I am wrestling with the move to drupal 8/composer/docker/ddev. Any suggestions would be much appreciated.
Thank you!
Update 2022-09-14: DDEV has had https support fpr PHPMyAdmin and MailHog for years now, ddev describe will show you the URL.
(Original answer) ddev's PHPMyAdmin connection doesn't support https, just http. You can find the links for both PHPMyAdmin and MailHog using ddev describe; both are http-only, as in your example, http://mysitename.ddev.site:8036. It would be possible to provide https URLs for PHPMyAdmin and MailHog, but nobody has ever asked for them, and there's no security reason to do so.
Note that the key reason for https on the actual project URL is because real projects run behind https and people need to see problems like mixed content during the development phase. But there's no such need for PHPMyAdmin. However, I'm sure if people ever want it, we'll do it, it's not hard to do.
Just as a general add on, after ddev start you can run ddev launch -p in order to open PHPMyAdmin for the current project database in the browser.
I'm trying to get a Bitnami Rails stack running with Nginx and 5 Thin app servers.
I have the Thin app servers running OK and I've got Nginx started and it's connected to the 5 Thin servers.
But, some code is giving me "The service is not available. Please try again later." html when I access my app from a browser. I don't know where the code is that's giving me that message.
I have the Nginx server listening on port 80.
This is my nginx.conf file: https://dl.dropbox.com/u/35302780/nginx.conf
Thanks for the help!
Your config seems fine, except those 2 if statements because IF is evil inside location block. You may want to fix that.
Seems that you are using a 3rd party upstream module. Try to uninstall that module and use the normal upstream module.
I am having a problem with wamp server (again). First the icon would not turned green so I change the port to 8080 and now it turns green. However, when I visit localhost, I just get the message in the screenshot below.
Does anyone know what's going on here? Same when I try to go to PhpMyAdmin. I have version 2.1
try http://localhost:8080
(or http://127.0.0.1:8080 if there is a problem with the resolution of localhost)
you changed the port and I am not sure if you reflect this in your request.
Do you have Skype on in the background? If so turn it of restart your web server on port 80.
Edit: Like said in another response check for anything on port 80 and turn it off.
Check your system for any program that uses the port 80, and turn it off.
This will surely work:
Check in which Drive your Windows OS is installed. If it is E, F or other then C, then install wampp in that particular drive.
If Microsoft Visual C++ 2010 SP1 Redistributable Package is not intalled then install from : Download link
It should work.
I too faced the same issue during the installation.
This error is due to
1) if some other service is running on the same port
2) if some other application may block your application.
For checking
1.) Select the server icon. Select "www directory" and make sure it is pointing to where it should and that there are files there. --- It points to my Documents/wamp/www --- where there are an index and your test files.
2.) Select the server icon. Select Apache. Select service. Select "test port 80". See what port 80 is actually used by. --- I get "your port 80 is actually used by:......
Here you can find your port is used by which service.
If you have iis running remove that temporarily now by control panel-> uninstall program -. turn window feature on/off -> iis.
After this restart your system and run wampserver now. It will work Hope this may help
Check in your hosts file to see if there is a entry like this:
127.0.0.1 localhost
if there is a # before it like this
# 127.0.0.1 localhost
delete the hash as that is a comment
you will find your host file at:
C:\Windows\System32\drivers\etc
I am trying to learn Ruby on Rails, I have followed the instructions from this page to get rails installed on my PC.
I am also trying to follow this webcast to try and learn the language and framework. Everything is working so far, apart from the fact that I cannot access
http://localhost:3000
http://0.0.0.0:3000
http://127.0.0.1:3000, or
http://<actual IP address>:3000
locally. If I try the from another PC on my network then it works great. I have tried in Chrome, Firefox and IE7 but none work.
Has anyone else had this problem?
EDIT: Typical!! It's started working now. I have no idea why, I am typing the exact same address in to the address bar and it now works. But only if I use http://127.0.0.1:3000, localhost doesn't work. I do run IIS ASP.NET/ASP websites on this machine, and they work fine with localhost.
EDIT 2: If I trying pinging localhost it actually says
Reply from ::1: time<1ms
0.0.0.0 yields...
PING: transmit failed, error code 1214
only 127.0.0.1 seems to work. I did have IPv6 turned on, so I've disabled that and will try again tomorrow to see if a reboot helps.
I had this issue as well with Vagrant. The secret is to run
bin/rails server -b 0.0.0.0
What 0.0.0.0 means is to listen to all interfaces, not just on localhost. The alternative is to SSH into the vagrant machine with a SOCKS proxy.
ssh -C -D 8080 vagrant#localhost
Open up your Internet explorer proxy settings and set the SOCKS v5 proxy to port 8080.
In order to access http://localhost:3000 you need to run the local Rails server in a terminal window:
$ rails server
This is described in this section of the Rails Tutorial book.
Note: I am the presenter of the screencasts in question.
Can you telnet to the port? Try:
telnet localhost 3000
That should tell you if the ports unavailable at the TCP level, or whether something's going on at the HTTP level.
Ping might not work if ICMP is disabled, which could be completely unrelated to your issue.
Also, try looking in your hosts file for any redirections:
c:\Windows\System32\drivers\etc\hosts
One way is to do the simple
rails s
Another (more specifically) is
rails start localhost 0.0.0.0
or
rails start 0.0.0.0
another way is
rails s 0.0.0.0
all of these works
I had an epic issue with my System Path (Environmental Variable) not being set properly.
Simple copy paste job, unplugged the 1 week stalled Ruby installation.
Control Panel > System > Advanced tab > Environment Variables > System variables > Path... Edit...
Make sure it contains these paths (among others)...
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem
I had your same identical problem. You have simply to run
$ rails server
from inside the folder of your application, not outside...so, if you have your application in
C:\Sites\myapp\blog
and blog is the folder where live your app, the command has to be prompted from here. Launching it from myapp folder won't work.
Are you possibly using a proxy but haven't listed localhost as proxy exception?
Have you tried disabling your firewall? They can cause pesky problems at times.