Related
I am very frustrated now. I upgraded Xcode to version 12 and tested my app on iOS 14. Now the problem is, that my launch screen is just showing in black. I tested it with an iOS 13.5 device and it is still working as expected. I tried to remove the launchscreen.storyboard approach and added the Launch Screen key in the info.plist, but then the image is scaled to full size.
Now I tested a little bit with the launchscreen.storyboard and I found a few things.
If I remove the Image view, the launch screen is showing as expected. I added just a label and that would work.
If I use an image from the system in the image view, it is working as well. It is just not working when I am using an image from the project.
Did you experience issues with iOS 14 and the storyboard approach?
If yes, how did you fix it?
A work around that seems to be working for me:
For a strange reason if I am downsizing the image then it is working fine. I had a full size image of dimension 2732x2732 and it didn't work. Reducing the dimension of the same image to 2400x2400 is working fine. I have tried with 2500x2500 and 2600x2600 but none worked.
Most importantly, every time I change the image I had to restart the simulator to reflect the updated image.
It didn't work on the real device yet. Like the simulator, I had to restart the device and then only it worked.
Not sure if it is something with the dimension/size of the image or with the reboot.
Further updates:
I uploaded the same build (with smaller image) to TestFlight and installed it on my device (basically updated from the previous version having large size image) and unfortunately the issue persisted :(
Now what I did is uninstalled the app and reinstalled it again from TestFlight. Issue still persisted.
Finally I had to delete the app, reboot my device and install the app again. This is when it worked fine.
So here are a lot of good ideas, but I was able to finally solve the issue - it is more like a workaround. I needed to store the picture outside the Images.xcassets folder and then it started to work again. This is a very weird issue.
A workaround is to use a button with an image instead of an imageview in the launch storyboard. It works like a charm!!
One reason might be the size of the images. Since iOS 14 images for launch screen are limited to 25 MB as stated in Apples Human Interface Guidelines.
An image with 2.400x2.400 pixel will result in a memory size about 22 MB. With 2.500x2.500 we reach the 25 MB.
We had the same problem where the full screen image in LaunchScreen.storyboard was black on all #3x devices like iPhone 12. Reducing the size of only the #3x launch image from 3.072x3.072 to 2.400x2.400 solved this problem.
A square image is the easy way to support landscape and portrait orientation. But it should also work to have different images for each orientation, where one image in total is less than 25 MB.
Had the same problem. The issue was the .png image used in the launch screen storyboard. This lead to the whole launch screen just being black.
What fixed it in our case was:
Choose a smaller image
Delete App from device/simulator
Restart device/simulator
I found that the image was the source of error by replacing the image with an other one in our app. It immediately worked with a different image (no restarting or else required).
The only workaround that works for me was to add the images outside Images.xcassets folder. After modified this and rebuild the app, it worked expected.
Some issue it's happening on the iOS 14 or XCode 12.
I encountered this problem
when using LaunchScreen.storyboard and used the image on Assets.xcassets, not working on iOS 14 with Xcode 12.
I solved it by try put change 3x image 2436×1125,and set 2x image 828×1792.
Finally I had to delete the app, reboot my device and install the app again. This is when it worked fine.
I had this, too. Pretty infuriating. My launch screen is merely a background image (2048x2048 PNG) and a graphic (2048x2048 PNG) in the middle.
The fix for me was to have a smaller middle graphic (720x720 PNG), remove the images from any assets catalogs, and add them into the project.
The images didn't show on the Simulator until I restarted it. When built and installed to my iPhone, I didn't have to restart it.
In my case, the ViewController property, "Is Initial View Controller" was not checked. Also, be sure to set the color of the view to an actual color and not a system color, otherwise you can run into issues with the device theme settings. That is, if you like to show a specific color.
Also, to access that setting make sure you click on the actual View Controller object in the drop down panel.
The only thing that worked for me was:
Delete the existing LaunchScreen.storyboard & create a new one
Check " Use as Launch Screen "
Check " Is Initial View Controller "
Make sure the image your using is NOT located under Assets.xcassets folder. I put my image in the root of the project
Delete the app, restart the simulator, and run the application
BINGO!!!
I have a similar issue with XCode12 / iOS14 and React project:
The launchscreen.storyboard was working fine in previous versions. Since update to XCode12 it shows as following:
Lauching into a black screen (2-3 seconds)
Then showing the Launchscreen correctly
If I try to use the new "Launch Screen" dictionary in Info.plist I have the follwing issues (same in another Xamarin App):
Image is zoomed in / not showing completely
Background color setting is completely ignored (tried RGB and Color.xcasset)
This is just completely bugged since Xcode 12 !
So I've had this bugged with Apple via their feedback system since June 26th 2020 - FB7795777.
I've provided my project and many diagnostic reports and they've never come back with a fix.
However, today, I fixed it.
Basically, there has been some change in the iOS/iPadOS SDK about how it's support .PNG and .JPG files (size or dimensions are the problems I think) in the Launch screen process.
The solution:
Open your .PNG file in Photoshop and re-export it with the 'Smaller File - 8-bit' option checked. It shrunk it down to less than half the size, and it worked first time.
In my case following did the job:-
Remove Launch screen file from Project -> General -> App Icons and Launch Imagees -> Launch screen file.
Go to info.plist file and open as source code.
Add following code there and change the image name:-
<key>UILaunchScreen</key> <dict> <key>UIImageName</key> <string>splash(This is your image name)</string> </dict>
In iOS 14 this new key was released (UILaunchScreen). So take care from next time. If you get error then check info.plist file.
Happy coding :)
That worked for me was:
Put xxx.pdf image into Assets.xcassets and set "scale" to Single Scale
In Launch Screen.storyboard, set the imageView's image is xxx, then set imageView's width, height, centerX and Bottom to View
Then worked for me
Xcode 12.5.1, iPhone 7 Plus, iOS 14.6
In my own case , I solved the problem in these few steps:
Image must be 1024px, then
Add to assets
-> A workaround in case you have a much bigger image, use these simple steps:
Generate your app icon
Go to the app icon folder
Copy the 1024 px of that image andappicon image
Then add to assets.
Both methods works perfectly.
This may help others so I am adding it here.
I use Cordova for my hybrid app, and then I load my image assets that are generated by Asset Catalog Creator (which is a great little product).
This was working perfectly until I updated to Xcode 12 and tried to run it under iOS 14.
What I discovered is that Cordova was adding a "CDVLaunchScreen.storyboard", and they had a "LaunchStoryboard.imageset" (directory) in their asset catalog, which contained just a contents.json file.
I simply copied this into my asset catalog, and when I drag and drop this into my updated project (newly generated each time by Cordova), my Launch Image displays again.
Don't ask my how or why Xcode magically wires this stuff together, but it worked for me.
I can pass along the contents.json that worked with my asset catalog if it will help.
BTW, my General settings screen does NOT have a Launch Screen File selected, but Xcode seems to find the required files.
I've got yet another potential solution to this, as none of the existing solutions worked for me.
I use PDF vectors in my Asset file, and this normally works great. But it turns out that it doesn't work on the launch screen - it just shows skips the launch screen entirely if it contains a PDF image.
Swapped it for a large PNG, problem solved.
What worked for me:
Use smaller images like #Darkpaw suggested. Launch storyboards are, after all, intended to be indicative of the coming UI, not artwork based.
Use PNG image (not PDF) and don't put it in an assets catalog like suggested by #Sylber
Just noting separately as I had black/broken launch mages until I did BOTH steps.
You might be seeing this issue if your #1x, #2x, #3x images are blank in your image xcassets folder.
Make sure you have images for each.
You can also select your 1 image, and set Scales as "Single Scale" in the Attributes inspector (on the right hand side)
In Xcode 13 launch screen was not displaying rather a black screen was coming.
But this worked for me Project -> General -> App Icons and Launch Images -> Launch screen file -> change Main to Launchscreen.
Most answers mentioned here are workarounds, the issue i noticed is that when you modify the launch screen assets, do check the item file name too.
Assets -> Show in folder
Then check the launchscreen items folder and make sure that the item inside the folder has the same name as folder.
To expand on Thorsten Stark's answer above...
Since iOS 14 images for launch screen are limited to 25 MB
For me it appeared to be an accumulated size of assets on my Launch Screen storyboard file. When I removed a number of them I no longer saw the black screen.
I ended up just using one image 2778 x 1284 which was 600kb in size. This solved the problem.
To further test, I duplicated the image to make 3 copies on my Launch Screen storyboard file, and sure enough, black screen again.
The best solution to me in 2022...
reduce sizes of your images, in my case:
splash.png (256x256)
splash#x2.png (512x512)
splash#x3.png (768x768)
only doing this and put them in Resources folder then reference in
ImageView work like charm....
alternative:
use Button in place of ImageView works too
I have this project that is not using storyboards when I run it on my iPhone simulator it is not coming up full screen ?
From the viewcontroller property inspector select the presentation and set it to full screen it will work check the below image
check the content mode it should be scale to fill and size as freeform
Add below image to your project. Using the name Default-568h#2x.png
Because Xcode doesn't know your app size so this will pickup smallest size 320x480. With this image and name I suggest above, Xcode will recognize your app support bigger size.
Don't worry when running your app in smaller device, it's still OK.
Image HERE
This might be related to issue in launch screen. I also setup the project without storyboard but deleted the LaunchScreen.Storyboard as well and ended up getting the same screen as yours. After I recreated the project but leave the launchScreen file i was able to get the full screen display for my viewcontroller
I'm trying to use Xcode's LaunchScreen storyboard as my launch screen? All the questions that have previously been asked about this refer back to the old launch image or .xib method - trying to do it now with the new LaunchScreen storyboard that Xcode automatically generates instead. I've selected the LaunchScreen storyboard as my launch screen file in my Deployment Info:
The storyboard itself confirms that it is set as the launch screen in it's file inspector.
And the info.plist file reflects this as well.
And yet, it doesn't work. The LaunchScreen storyboard never shows - it just goes straight to the first screen in my main storyboard. Using Xcode 7.2 and deploying to iOS 9.
Enable these two settings for the LaunchScreen.storyboard
If you are using xcode 11.2 you'll need to remove the app and execute it again to see the launch screen. I have to do this every time I modify the launch screen in order to see the new changes.
Another thing to make sure is that Launch Screen File is set to Launch Screen.storyboard
**Delete the app from the device. Re-run. **
In my case I had all the suggested settings set correctly but continued to have the original blank launchscreen. In the spirit of AmJa's suggestion regarding a "cache" problem, I deleted my app from my device and reinstalled. Reinstalling did the trick for me on both my devices and simulators.
In case anyone else runs into this issue, I resolved it by simply deleting the ViewController on my LaunchScreen storyboard (leaving me with an empty storyboard), creating a new ViewController and resetting the Storyboard entry point to that new ViewController. There may be some sort of bug with XCode 7.2 with respect to the LaunchScreen storyboard and default entry point into the auto-created View Controller, but then again, I've tried replicating this 3 times and it hasn't ever repeated itself, so maybe not.
In storyboard, in ViewController scene, I had to check Is Initial View Controller for storyboard to be seen as Launch Storyboard.
Suprisingly this is not checked when you add first View Controller. Xcode 11.
Just in case it helps someone.
Scenario, I created my new project and copied a old Launch Image from another project. And then started getting the launch image but when I wanted to change it to new image then still i was viewing the old image it was stuck for ever as launch image no matter what I do.
Then I reset my Simulator and restarted my iPhone and there you go I stared getting the new image. This looks like that somewhere in the documents or cache the devices store the old image until you reset the phone.
Thanks
As #abanet, mentioned in his answer, anyone who uses Xcode 11.2 and above, they have to delete their app and launch it again to see launch screen changes. It's not reflecting immediately. It looks like a bug from Xcode definitely not an intension.
How to fix for Xcode 11.0 and above:
Do this: https://stackoverflow.com/a/41287094/2190175 if you haven't already, and after that:
Delete app from device / simulator
Restart device / simulator
Reason: Launch Screen part of storyboard is cached during development and doesn't change until you remove app from device / simulator and reinstall it completely.
Other solutions didn't work for me, but this did:
Toggle on and off Device Orientation (e.g. support Upside Down) and Hide Status Bar in General.
I'm not sure which one did the trick, but it's working now.
If you don't see anything and your Launchscreen.storyboard only has an ImageView in it, then it might actually be showing the storyboard but not the image. Try putting a button in it or something. I've discovered that my Launchscreen.storyboard is actually showing but won't show any images and I don't know why.
The issue can be also that the "LaunchScreen.storyboard" is not added to this target.
To fix this open "LaunchScreen.storyboard" then press on "File Inspector" and under "Target Membership" add it to the needed target.
I tried everything mentioned here, the only thing that worked for me was creating a new LaunchScreen file. I'm using Xcode 12.1
(Don't forget to update the reference in the targets settings)
I was banging my head against a wall with this since Xcode 10.1 does not include a launch option for the new 11" iPad Pro when you create a new iOS Launch Image set, and without it, the iPad Pro doesn't display correctly, leaving me no choice but to get this working with a Launch Screen storyboard.
I tried combinations of so many things, but I wanted to post what ended up making it work 100% of the time (which was, in fact, a combination of a number of things).
As you have no doubt read, for the UIImageView within the Launch Screen storyboard, you should NOT include the extension (.jpg or .png). So many posts say that, but leave out that the reason is that you should create a new image set within Images.xcassets (NOT Launch Screen image set, but just image set) and name it whatever you want (for instance, "Launch-Default"). Then, drag and drop the desired .jpg or .png into the new image set. You will then use the name of that image set within the UIImageView in the storyboard and everything should work fine (the image should even show up inside of Interface Builder).
Also, within the General settings for the project, make sure to set the Launch Screen File to your new storyboard.
You need to add App orientation specific Launch Screen.
LaunchScreen Portrait: https://app.box.com/s/hfoeuvsy68iu913keb8p5hs1z9fdz3jk
LaunchScreen Landscape : https://app.box.com/s/o9q5nkrvk2ewdh57oiiar85zf658olgj
Drag LaunchScreen.storyboard & LaunchScreenBackground.png to Xcode sidebar. Then specify LaunchScreen in Xcode General page. See attach image
In my case, the problem was that the image for the logo was taken from a different target. Make sure that the image is from the main target of the application, and reset the simulator via menu Device/Erase All Content ad Settings...
In my case a few image views cover the whole parent view of the launch screen (e.g. pinned to the view edges). I had to uncheck the Resize view from NIB in the Attribute inspector for the launch storyboard and finally it worked for me (just do not forget to manually delete the old app from the simulator)
In my case the background color of the view (full screen) was set to a "missing" color literal! After trying all above of course ;(
A jpg image does a problem change the extension to png or use another png image
Worked like a charm for me
in xcode9 swift4 LaunchScreen storyboard, use .jpg image & uncheck clear graphics context for imageview. it's absolutly working.
I have an app that supports iOS8 and later, built in Xcode 7 and I am using a XIB for a Launch Screen (I do not have launch images). The view contains a single UILabel with the app version, and 2 UIImageViews with images that are both present in Images.xcassets: A logo and a splash image.
The UILabel and the logo image appear correctly when I launch the application, but the splash image does not if I run the app on an iPad Air 2 with iOS9. I have tested on an Air and a Mini running iOS8, and iOS9 simulators for iPad 2, iPad Air, and iPad Air 2 and the image appears correctly in all of those.
I ran some basic troubleshooting to see if I could figure out what is going on but I haven't been able to solve it and the only difference I can see between the image that's working and the one that's failing is when I added it to the assets...
Here's a rundown of what I know:
The UIImageView for the splash image is in the correct place, at the correct size. I can tell this because I set its background color to green just to make sure. The view is there, but the image does not appear. So I'm assuming that the view is not to blame.
Setting the UIImageView for the splash image to also use the logo image makes the logo image appear in the correct place for the view. This also leads me to assume that the view is not to blame.
The UIImage that I am using in the splash image view is used elsewhere in the app and appears fine in those other views (the logo image is also used elsewhere in the app and appears fine). So I'm assuming that the image is valid and having it appear in other views is not a problem.
I've confirmed that the settings of the UIImages for the logo and splash in the xcassets file are the same. They are set to Universal, Any width and height, multiple scale factors, rendered as default. There is one difference - the logo has 1x, 2x and 3x scales while the splash image only has 1x and 2x, but I have also tried using UIImages with only 1x, and 1x and 2x values in the UIView and they work (if they were added to the project some time ago).
Adding another image of a different size or format (PNG and JPG) to my xcassets and using that UIImage in the UIImageView for the splash image also fails to display.
Adding another UIImageView to the XIB file and allocating it a UIImage that was already in the xcassets works, the image appears in the loading screen.
Copying and renaming the image files used for the logo and adding them to the project then using that UIImage in the splash view also fails to display.
I have tried cleaning the project, restarting the development machine, and deleting the app from the Air 2 and reinstalling it just in case that was a problem.
These last three steps lead me to believe that there's some issue with images added after a certain point in the project file's lifetime. While I updated to Xcode 7 yesterday, the splash image was originally added in Xcode 6, but the logo image (also added in Xcode 6) was added some months before.
I've looked over the json files for the logo image and splash image and they appear to have the same format. I've also trawled through the pbxproj file looking for differences and I can't see any.
So I was wondering if anyone had any idea why the launch screen might not display these new images I'm adding on the Air 2 specifically? Other questions I've been reading through relating to images not appearing all seem to relate either to Launch Images, or to images in XIB files that have associated classes, neither of which seems relevant here.
Turn it off and then on again.
Seriously, restart the device — that’s what fixed it for me.
Here’s what didn’t work:
Cleaning DerivedData.
Cleaning the project.
Uninstalling the app from the device.
Restarting Xcode.
Restarting the computer.
Older observations:
Just like the others, it:
Works fine in the Simulator
Used to work on the devices (iPhone 5S, iPad Air)
No code changes (verified via git reset --hard HEAD), yet stopped working.
What I remember triggering the first build where it stopped working was unplugging the iPhone while it was runnning. (Not sure if it’s related.)
However, the git reset not fixing it (combined with all the clean steps not working) tells me it this must be getting cached somewhere else. Quite possibly in one of the .gitignored files? (I’m using Git ignore file for Xcode projects)
One workaround that worked for one UIImageView (in the UIView that has three) but not for the others was putting the image into an .xcassets file. Reverting to the plain image file did not undo the fix. (Really feels like a caching error.)
UPDATE: See top — restarting the device is what fixed it. I get the feeling the wrong bitmap data is being cached on the device itself.
Radar: http://openradar.appspot.com/23534818
"The solution for me was simply to make sure that the "Clears Graphics Context" box is unchecked for the UIImageView in the storyboard. Just changing this fixed it for me."
No other solutions worked for me.
Got it from apple developer forum
I had exactly the same issue on an iPhone 6.
The very strange fact is that I was able to use another image from my images.xcassets which had the same size, compression, color space ...
I'm not able to find why it doesn't work but I found a solution :
Simply put your file outside your images.xcassets and use its full name (with extension) in Interface Builder
Hope this help !
The following sequence of operations fixed the issue for me on Xcode 7.3.1 and iOS 9.3.4:
Clean Your Build (⌘+⇧+K)
Close Xcode
Hard Reset iOS Device (Power + Home Button reboot)
Relaunch Xcode - let indexing finish and build on device once it is ready.
Many other answers suggest rebooting devices and / or rebuilding and / or reinstalling is the solution.
While these answers work for some of us, the reason these work is because the app is forced to "retake" or "rebuild" cached snapshots.
Cached snapshots are used by apps to present images before supporting data is loaded into memory, including the asset catalogue that contains storyboard images.
This SO answer by #jaga provides the solution, but not the reason, as to why UIImageViews are missing in the Launch Screen on device (but not in the simulator).
Background
Recently I attempted to use a custom font in my "Launch Screen.storyboard" file.
The reason I could not became clear after reading this SO answer by #TimCamber, which prompted me to do a little more research and testing.
The reason that a custom font is not included in my Launch Screen Storyboard file is the same reason an image within an asset catalogue is not included...
The app prepares portrait & landscape snapshots of the app's Launch Screen from your Launch Screen Storyboard file and (currently) saves it in your app bundle here:
/Library/Caches/Snapshots/<<app_bundle>>/ and
/Library/Caches/Snapshots/<<app_bundle>>/downscaled/.
This process is complete before any supporting files are loaded, including any custom fonts and the asset catalogue.
Solution
As mentioned above by following #jaga's solution, literally all that is required is to:
(old school) add an image file (.PNG) to your app's bundle (as you can see from the screenshot below I added the image file under the Supporting Files subdirectory in an Images subdirectory), and
reference that image in your UIImageView object in the Launch
Screen Storyboard file...
I was seeing the same problem. Rebooting the device (iPhone 6) and rebuilding the app to the device is the only thing that fixed it. I tried many other tips and suggestions but nothing else worked. Only reboot + rebuild helped.
My solution #iOS 11.x:
Use .jpg image instead of .png. I think image file size matters;
(Optionally) Put image file in project directory rather than .xcassets;
I had the same for app installed from TestFlight.
Delete app -> then restart iPhone -> then reinstall app works for me.
Just reinstall app or just restarting device didn't help.
What worked for me was to select Reset Content and Settings... from the Simulator menu
I was having the same problem, but restarting the device didn't help. What worked for me was deleting the UIImageView from my launch storyboard and adding a new one.
Have you tried turning the device off and on again? Do it.
Bring images out of Image.xcassets and add them again to project. It worked for me.
Remove app from mobile and then restart mobile and install app again. now the issues will be solved
I also had this exact problem in Xcode 7 with iPad and iPhone devices. Although it makes no sense, I was able to get around it most of the time by setting not only the Image but also the Highlighted image in the image view to the same image in my images.xcassets.
I use the iPhone 5s device, also meet this problem.
I fix it by :
Remove Drive Data
Clean the project
Restart Xcode
Remove the project from my device
Restart the 5s.
I think it's something wrong of Xcode to use memory, system may be allocate a little memory for Xcode cause Xcode drawing the lunch image failed (On my computer , Xcode have runned for several weeks without close)
it's worked for me.
First in xcode clean de project.
If you use the simulator, delete app and relaunch.
If you use a device, delete app and restart the device.
I think launchscreen only support image in Assets.xcassets.
Restarting Xcode did it for me.
What did not do it:
Clean build folder
Restart device or simulator (image wasn't visible on either)
Select the ImageView and then remove the image extension (.png or .jpg) in the attributes inspector tab > Image view > Image > Image Name.
On launchscreen.storyboard the image will not appear but it will be there in device. This worked for me.
It seemed a bug of iOS. Like sometimes the system animation disappeared.
Now I just reboot the iPhone and it is worked for me.
In my case I it was the image name.
I added an image named Default-568h#2x.png to LaunchScreen.xib - one of my old launch screens just for testing purposes. I was building on the iPhone X Simulator, the image didn't show up.
Changing the name to something neutral (MyImage.png) solved the issue.
It seems that the #2x was part of the problem as well as the -568h.
Which makes some sense on a -812h#3x device.
I have the same issue with imageView a launch screen storyboard. I removed reference of picture from project, I renamed my image and added it again to project. All works perfectly.
Also can 1. delete project image 2. change image name 3. add file image to project
It worked for me.
I had this problem in iOS 10 on an iPhone 6 and also in the Simulator. My image was in a folder and that seemed to be the issue. I removed the image from the folder in Xcode and put it in the project's base directory which solved the problem.
I experience the same. I change image resolution from 300 pixels/inch, change it to 72. It works for me.
Next helped to me:
change "Launch Screen File" to another xib
run the app
change xib back
Also very important: check that your is xib not opened in another tab, that can cause it as well!
I found a simple but radical solution that worked for me :
1 - Delete the file : LaunchScreen.storyboard and move it to trash.
2 - Product -> Clean
3 - Create a new launch screen file named : LaunchScreen.storyboard and put your images in it
4 - Save and build
That worked for me after trying complex methods for hours... It seems that my LaunchScreen.storyboard was write-locked and couldn't be saved or a weird caching process was blocking it.
This is too important
Must be empty! Launch Screen File
Image name is the problem.
Rename the image name used inside the Launch screen storyboard.
Make sure not to use any character other than alphanumeric ( don't use "_-&#")
Worked for me like a charm..
SOLVED!
The only thing that worked for me was deleting the ViewController from LaunchScreen.storyboard and create a new ViewController set to
Is Initial View Controller
Simple as that :)
I'm trying to get the Launch screen to display instead I get the default black screen.
I remember I've had this issue in the past and is something really silly but I can't remember what it is.
I have a LaunchScreen.xib. I've set in my target -> info to use LaunchScreen and not image catalog. I am running iOS 8 and using Xcode 6.1. I tried on all iPhone simulators and iPhone 4s.
I can't think what more info to give than that.
For those who are still looking for another answer here's what worked for us:
Our launch xib only contains an imageView in the middle of the view. For some reason the image never showed (but the view was there, checked it with changing the background color).
The solution was to move the image file out of the image catalog and just drop it in the project as a standalone file. Pretty strange considering when we tried other images from the catalog they appeared correctly but not this one. Anyway, I hope this helps someone!
I had the same issue.
Turned out that I had earlier tried to attach a viewcontroller file with the launchscreen. To fix:
Go to launch screen
Click Connections Inspector in right pane
Remove all connections.
Accoring to #doctorBroctor: also go to the File's Owner tab and remove the connections there.
Go to your launch screen
Go to file inspector
Check the checkbox for "Use as Launch Screen"
I have tried with:
Deleted Launch Screen File.
Tapped on Use Asset Catalog in Launch Image Source and added Splash screen Images as desired in the image asset.
Deleted Previous Project on Simulator or Device. Clear the Project.
Run Again and it is showing now.
One reason for why you might experience the black screen instead of your launch screen is that the .xib file might not get copied in your build phase. At least that was my issue that caused my app to show the black screen even though I had done the steps you describe.
So, double check that your LaunchScreen.xib (or whatever it is named) appears in:
Your target -> Build Phases -> Copy Bundle Resources
And if not, make sure to add it. That resolved my issue.
For me the problem was that I hadn't selected the LaunchScreen.storyboard in the General tab of the project settings.
I've experienced the same issue. The solution for me was simply delete the app, reboot the device, then reinstall it. I think iOS caches the Launchscreen, and this cache is not invalidated every time when it should be.
I had the same issue in iOS 9 as well. Deleting the old app in simulator alone is not enough. Simulator has to be quit launched. It worked for me.
I fix it by select the "is Initial View Controller" in storyboard.
Make sure to delete the installed app from the emulator. Then run the app again from xcode (product->clean, product->run).
That worked for me.
I've looked at all the above answers, it helped a bit. Especially the answer by Suragch put me in right direction.
The LaunchScreen.storyboard isn't showing up, even after applying simple background colour to the view and removing the image.
Firstly, I cannot see the "LaunchScreen.storyboard" as shown in the image
This was because, some reason the LaunchScreen.storyboard wasn't added to the build Target.
Solution: Ensure the LaunchScreen.storyboard is included to the build Target.
Also, Choose the LaunchScreen.storyboard from the drop down as shown in above pic.
I hope it helps someone!
I found this old post 'cause my launch screen WAS working, then it stopped. I thrashed around for a good while and then realized this, undocumented problem:
If your launch XIB or storyboard file has a UIImageView with an image whose name contains a space, the entire screen won't load.
I only had a centered UIImageView in my LaunchScreen.xib that contained an image (.png file), and had the same black screen showing.
I removed the image (the .png file) from the project, added it again with new name, and used the new image.
Make sure to use empty Launch Screen File, then Xcode would use Launch Image Source.
Make sure you have "is initial View Controller" checked in interface builder.
I tried pretty much everything else but this finally fixed the problem and now it works in simulator as well as the device.
New feature in the iOS 8 SDK: you can now use a storyboard scene in place of your app’s launch images.
Create a blank storyboard file named LaunchScreen.storyboard.
Go to your target settings and, on the General tab, select the storyboard as your Launch Screen File. Xcode will add a corresponding UILaunchStoryboardName key to your app’s Info.plist. When this key is present, Xcode will prioritize it over any launch images you might have set.
Add a view controller scene to the storyboard. Add some subviews to the scene and position them with constraints. When you launch the app on a device, the OS should use the scene as the launch screen.
For more information check out this blog post by Ole Begemann "Replacing Launch Images With Storyboards".
Reset Simulator working for me
For iOS 14 and newer:
Device > Erase All Contents and Settings...
For iOS 11 and newer:
Hardware > Erase All Contents and Settings...
For previous versions:
Simulator > Reset Content and Settings...
Your launch image should be a PNG. A JPEG may work under certain targets, but you should use PNG anyway.