I run some installation scripts via docker, they change ~/.bashrc but then I need to source it to use installed commands in RUN instructions below.
Tried obvious RUN . ~/.bashrc and got /bin/sh: 13: /root/.bashrc: shopt: not found error.
Tried RUN . ~/.profile and got mesg: ttyname failed: Inappropriate ioctl for device
I do not want to use ENV instructions. The point of having external installation scripts is to use them in non-Docker environments, for example when running unit tests locally. ENV instructions would duplicate environment setup which is already done in installation scripts.
You should not try to set up shell dotfiles in Docker. Many typical paths do not run them at all; for example
# In a Dockerfile
CMD ["some", "command", "here"]
# From the command line
docker run myimage some command here
The Docker environment is, fundamentally, different from a standalone Linux system; in addition to shell dotfiles, "home directory" isn't really a Docker concept, and if you have a multi-part process, on Docker it's standard to run each part in a separate container, but on standalone Linux you could use the init system to keep all of the parts running together. If you're expecting things to work exactly the same with exactly the same installation scripts, a virtual machine would be a better technological match for what you're attempting.
("Inappropriate ioctl for device" also suggests that there are things in the dotfiles that strongly expect to be run from an actual terminal, which you don't necessarily have at docker build time.)
My generic advice here is:
If possible, install things in the "system" directories within the image and avoid needing custom environment variable settings. (Don't use a version manager like nvm or rvm; don't use a Python virtual environment.)
If you do have to set environment variables, ENV is the way to do it.
If you really can't do either of the above, you can set environment variables in an ENTRYPOINT script before launching the main process; but if it's important to you that variables show up in docker inspect or docker exec shells, they won't be set there.
(Also remember that each RUN command launches a new container with a totally new shell environment. You can RUN . .profile; foo, but the environment variable settings won't carry through to the next RUN line.)
when I run dep ensure
/home/jenkins/workspace/myproject-voter is not within a known GOPATH/src
we have go installed on this docker image , I know that the project is not cloned to go/src but my question is if via set env or something I can do some trick to overcome this issue ?
my question is if via set env or something I can do some trick to overcome this issue ?
Not "set env", but ENV:
ENV GOPATH=/path/to/your/Go/project
That would ensure any Go command is using the right workspace.
I'm trying to write (what I thought would be) a simple bash script that will:
run virtualenv to create a new environment at $1
activate the virtual environment
do some more stuff (install django, add django-admin.py to the virtualenv's path, etc.)
Step 1 works quite well, but I can't seem to activate the virtualenv. For those not familiar with virtualenv, it creates an activate file that activates the virtual environment. From the CLI, you run it using source
source $env_name/bin/activate
Where $env_name, obviously, is the name of the dir that the virtual env is installed in.
In my script, after creating the virtual environment, I store the path to the activate script like this:
activate="`pwd`/$ENV_NAME/bin/activate"
But when I call source "$activate", I get this:
/home/clawlor/bin/scripts/djangoenv: 20: source: not found
I know that $activate contains the correct path to the activate script, in fact I even test that a file is there before I call source. But source itself can't seem to find it. I've also tried running all of the steps manually in the CLI, where everything works fine.
In my research I found this script, which is similar to what I want but is also doing a lot of other things that I don't need, like storing all of the virtual environments in a ~/.virtualenv directory (or whatever is in $WORKON_HOME). But it seems to me that he is creating the path to activate, and calling source "$activate" in basically the same way I am.
Here is the script in its entirety:
#!/bin/sh
PYTHON_PATH=~/bin/python-2.6.1/bin/python
if [ $# = 1 ]
then
ENV_NAME="$1"
virtualenv -p $PYTHON_PATH --no-site-packages $ENV_NAME
activate="`pwd`/$ENV_NAME/bin/activate"
if [ ! -f "$activate" ]
then
echo "ERROR: activate not found at $activate"
return 1
fi
source "$activate"
else
echo 'Usage: djangoenv ENV_NAME'
fi
DISCLAIMER: My bash script-fu is pretty weak. I'm fairly comfortable at the CLI, but there may well be some extremely stupid reason this isn't working.
If you're writing a bash script, call it by name:
#!/bin/bash
/bin/sh is not guaranteed to be bash. This caused a ton of broken scripts in Ubuntu some years ago (IIRC).
The source builtin works just fine in bash; but you might as well just use dot like Norman suggested.
In the POSIX standard, which /bin/sh is supposed to respect, the command is . (a single dot), not source. The source command is a csh-ism that has been pulled into bash.
Try
. $env_name/bin/activate
Or if you must have non-POSIX bash-isms in your code, use #!/bin/bash.
In Ubuntu if you execute the script with sh scriptname.sh you get this problem.
Try executing the script with ./scriptname.sh instead.
best to add the full path of the file you intend to source.
eg
source ./.env instead of source .env
or source /var/www/html/site1/.env
I am writing Ansible playbooks to setup and install our applications on Solaris servers.
The problem is that the (bash) scripts which I need to execute all assume that a certain directory lies on the PATH, namely /data/bin - which would normally not be a problem were it not for Ansible ignoring all the .profile and .bashrc config.
Now, I know that you can specify the environment for shell tasks via the environment flag, for example like this:
- shell: printenv
environment:
PATH: /usr/bin:/usr/sbin:/data/bin
This will properly path the /data/bin folder, and the printenv command will correctly display (or my bash scripts would correctly run).
But. There are two problems however:
First of all it is very annoying to have to specify the environment over and over again. I know that you can define the environment in some playbook base file variable and the reference that, but you still have to set environment: ... on every single shell task.
Secondly, the above example does not allow me to specify the path dynamically, e.g. as PATH: $PATH:/data/bin - because Ansible executes this in a way which does not resolve $PATH, thus the command fails catastrophically. So essentially this will override any other changes to PATH.
I am looking for a solution where
the additional PATH entry should only be added once
the additional PATH entry should not override entries added by other tasks
P.S. I found this nice explanation on how to do this on Linux, but it makes use of /etc/environment which does not exist on Solaris. (And /etc/profile is once again ignored by Ansible.)
try adding -o SendEnv=PATH to ssh_args in ansible.cfg. Requires that
the shell in which you run ansible has /data/bin in PATH. Or however ansible allows you to modify the current/local PATH variable.
remote machine has AcceptEnv set correctly.
I am running Jenkins from user jenkins thats has $PATH set to something and when I go into Jenkins web interface, in the System Properties window (http://$host/systemInfo) I see a different $PATH.
I have installed Jenkins on Centos with the native rpm from Jenkins website. I am using the startup script provided with the installation using sudo /etc/init.d/jenkins start
Can anyone please explain to me why that happens?
Michael,
Two things:
When Jenkins connects to a computer, it goes to the sh shell, and not the bash shell (at least this is what I have noticed - I may be wrong). So any changes you make to $PATH in your bashrc file are not considered.
Also, any changes you make to $PATH in your local shell (one that you personally ssh into) will not show up in Jenkins.
To change the path that Jenkins uses, you have two options (AFAIK):
1) Edit your /etc/profile file and add the paths that you want there
2) Go to the configuration page of your slave, and add environment variable PATH, with value: $PATH:/followed-by/paths/you/want/to/add
If you use the second option, your System Information will still not show it, but your builds will see the added paths.
I kept running into this problem, but now I just add:
source /etc/profile
As the first step in my build process. Now all my subsequent rules are loaded for Jenkins to operate smoothly.
You can also edit the /etc/sysconfig/jenkins file to make any changes to the environment variables, etc. I simply added source /etc/profile to the end of the file. /etc/profile has all all of the proper PATH variables setup. When you do this, make sure you restart Jenkins
/etc/init.d/jenkins restart
We are running ZendServer CE which installs pear, phing, etc in a different path so this was helpful. Also, we don't get the LD_LIBRARY_PATH errors we used to get with Oracle client and Jenkins.
I tried /etc/profile, ~/.profile and ~/.bash_profile and none of those worked. I found that editing ~/.bashrc for the jenkins slave account did.
The information on this answer is out of date. You need to go to Configure Jenkins > And you can then click to add an Environment Variable key-value pair from there.
eg: export MYVAR=test would be MYVAR is the key, and test is the value.
I found two plugins for that.
One loads the values from a file and the other lets you configure the values in the job configuration screen.
Envfile Plugin — This plugin enables you to set environment variables via a file. The file's format must be the standard Java property file format.
EnvInject Plugin — This plugin makes it possible to add environment variables and execute a setup script in order to set up an environment for the Job.
On my newer EC2 instance, simply adding the new value to the Jenkins user's .profile's PATH and then restarting tomcat worked for me.
On an older instance where the config is different, using #2 from Sagar's answer was the only thing that worked (i.e. .profile, .bash* didn't work).
Couldn't you just add it as an environment variable in Jenkins settings:
Manage Jenkins -> Global properties > Environment variables:
And then click "Add" to add a property PATH and its value to what you need.
This is how I solved this annoying issue:
I changed the PATH variable as #sagar suggested in his 2nd option, but still I got different PATH value than I expected.
Eventually I found out that it was the EnvInject plugin that replaced my PATH variable!
So I could either uninstall EnvInject or just use it to inject the PATH variable.
As many of our Jenkins jobs use that plugin, I didn't want to uninstall it...
So I created a file: environment_variables.properties under my Jenkins home directory.
This file contained the path environment value that I needed:
PATH=$PATH:/usr/local/git/bin/.
From the Jenkins web interface: Manage Jenkins -> Configure System.
In that screen - I ticked the Prepare jobs environment option, and in the Properties File Path field I entered the path to my file: /var/lib/jenkins/environment_variables.properties.
This way every Jenkins job we have receive whatever variables I put in this environment_variables.properties file.
Jenkins also supports the format PATH+<name> to prepend to any variable, not only PATH:
Global Environment variables or node Environment variables:
This is also supported in the pipeline step withEnv:
node {
withEnv(['PATH+JAVA=/path/to/java/bin']) {
...
}
}
Just take note, it prepends to the variable. If it must be appended you need to do what the other answers show.
See the pipeline steps document here.
You may also use the syntax PATH+WHATEVER=/something to prepend /something to $PATH
Or the java docs on EnvVars here.
I only had progress on this issue after a "/etc/init.d/jenkins force-reload". I recommend trying that before anything else, and using that rather than restart.
On my Ubuntu 13.04, I tried quite a few tweaks before succeeding with this:
Edit /etc/init/jenkins.conf
Locate the spot where "exec start-stop-server..." begins
Insert the environment update just before that, i.e.
export PATH=$PATH:/some/new/path/bin
Add
/usr/bin/bash
at
Jenkins -> Manage Jenkins -> configure System -> Shell->Shell
executable
Jenkins use the sh so that even /etc/profile doesn't work for me
When I add this, I have all the env.
Solution that worked for me
source ~/.bashrc
Explanation
I first verified Jenkins was running BASH, with echo $SHELL and echo $BASH (note I'm explicitly putting #!/bin/bash atop the textarea in Jenkins, I'm not sure if that's a requirement to get BASH). sourceing /etc/profile as others suggested was not working.
Looking at /etc/profile I found
if [ "$PS1" ]; then
...
and inspecting "$PS1" found it null. I tried spoofing $PS1 to no avail like so
export PS1=1
bash -c 'echo $PATH'
however this did not produce the desired result (add the rest of the $PATH I expect to see). But if I tell bash to be interactive
export PS1=1
bash -ci 'echo $PATH'
the $PATH was altered as I expected.
I was trying to figure out how to properly spoof an interactive shell to get /etc/bash.bashrc to load, however it turns out all I needed was down in ~/.bashrc, so simply sourceing it solved the problem.
I tried all the things from above - didn't work for me.
I found two solution (both for SSH-Slave)
Go to the slave settings
Add a new environment variable
PATH
${PATH}:${HOME}/.pub-cache/bin:${HOME}/.local/bin
The "${HOME}" part is important. This makes the additional PATH absolute.
Relative path did not work for me.
Option II (pipeline-script)
pipeline {
agent {
label 'your-slave'
}
environment {
PATH = "/home/jenkins/.pub-cache/bin:$PATH"
}
stages {
stage('Test') {
steps {
ansiColor('xterm') {
echo "PATH is: $PATH"
}
}
}
}
}
On Ubuntu I just edit /etc/default/jenkins and add source /etc/profile at the end and it works to me.
Running the command with environment variable set is also effective. Of course, you have to do it for each command you run, but you probably have a job script, so you probably only have one command per build. My job script is a python script that uses the environment to decide which python to use, so I still needed to put /usr/local/bin/python2.7 in its path:
PATH=/usr/local/bin <my-command>
What worked for me was overriding the PATH environment for the slave.
Set: PATH
To: $PATH:/usr/local/bin
Then disconnecting and reconnecting the slave.
Despite what the system information was showing it worked.
I have Jenkins 1.639 installed on SLES 11 SP3 via zypper (the package manager).
Installation configured jenkins as a service
# service jenkins
Usage: /etc/init.d/jenkins {start|stop|status|try-restart|restart|force-reload|reload|probe}
Although /etc/init.d/jenkins sources /etc/sysconfig/jenkins, any env variables set there are not inherited by the jenkins process because it is started in a separate login shell with a new environment like this:
startproc -n 0 -s -e -l /var/log/jenkins.rc -p /var/run/jenkins.pid -t 1 /bin/su -l -s /bin/bash -c '/usr/java/default/bin/java -Djava.awt.headless=true -DJENKINS_HOME=/var/lib/jenkins -jar /usr/lib/jenkins/jenkins.war --javaHome=/usr/java/default --logfile=/var/log/jenkins/jenkins.log --webroot=/var/cache/jenkins/war --httpPort=8080 --ajp13Port=8009 --debug=9 --handlerCountMax=100 --handlerCountMaxIdle=20 &' jenkins
The way I managed to set env vars for the jenkins process is via .bashrc in its home directory - /var/lib/jenkins. I had to create /var/lib/jenkins/.bashrc as it did not exist before.
1- add to your profil file".bash_profile" file
it is in "/home/your_user/" folder
vi .bash_profile
add:
export JENKINS_HOME=/apps/data/jenkins
export PATH=$PATH:$JENKINS_HOME
==> it's the e jenkins workspace
2- If you use jetty :
go to jenkins.xml file
and add :
<Arg>/apps/data/jenkins</Arg>
Here is what i did on ubuntu 18.04 LTS with Jenkins 2.176.2
I created .bash_aliases file and added there path, proxy variables and so on.
In beginning of .bashrc there was this defined.
# If not running interactively, don't do anything
case $- in
*i*) ;;
*) return;;
esac
So it's checking that if we are start non-interactive shell then we don't do nothing here.
bottom of the .bashrc there was include for .bash_aliases
# Alias definitions.
# You may want to put all your additions into a separate file like
# ~/.bash_aliases, instead of adding them here directly.
# See /usr/share/doc/bash-doc/examples in the bash-doc package.
if [ -f ~/.bash_aliases ]; then
. ~/.bash_aliases
fi
so i moved .bash_aliases loading first at .bashrc just above non-interactive check.
This didn't work first but then i disconnected slave and re-connected it so it's loading variables again. You don't need to restart whole jenkins if you are modifying slave variables. just disconnect and re-connect.
If your pipeline is executed on the remote node that is connected via SSH, then actually Jenkins runs agent application that performs incoming actions.
By default zsh shell is used, not the bash (my Jenkins has version 2.346.3).
Furthermore jenkins-agent runs non-login shell which makes default PATH values even if you put some configuration to .zshrc. It will be skipped.
My choice is to put the following shebang at a script start
#!/bin/bash -l
-l option makes bash to run in the login mode and in this case bash performs configurations specified in /etc/profile and ~/.bash_profile.
If you run script in Jenkins pipeline it will look like:
steps {
sh '''#!/bin/bash -l
env
'''
}