Add custom space to UILabel - ios

I've a weird problem that faces me. I've a UILabel contains text of multiple lines and I'm using bullet in the first line "•".
But my problem is that the second line is not aligned with first character after the bullet.
I measured it and found that width of the bullet is a little bit bigger tan width of normal space.
Is there any trick for that?

the issue is concerning font attributes. Get into the difference of monospaced fonts and proportional fonts, then you will know why there's a difference between space and bullet in your font
https://en.wikipedia.org/wiki/Monospaced_font
easy solution and maybe really an option for you is to use a monospaced font.

Okay, I found a powerful answer by using NSParagraphStyle.
https://wingoodharry.wordpress.com/2016/04/10/bullet-point-list-ios-swift/

Related

iOS UILabel and avoiding clipping of diacritics with custom font

First of all, there are many questions on StackOverflow, but none that fully answer this question.
The problem is mainly, but most likely not limited to, Thai and Arabic diacritics when rendered with a custom Latin-only font, using the text property of a UILabel. Which is also intrinsically sized in an auto-layout. I've already done everything Apple suggests, playing with the settings mentioned in their documentation, WWDC videos, as well as questions on StackOverflow (e.g. clipsToBounds = NO, etc.). Keep in mind, only my custom font setup clips in my scenario, not the iOS system font (.SF-UIDisplay), and not even the iOS system provided Helvetica or Helvetic Neue. The custom font has been checked and rechecked, and at this point the conclusion, iOS is the anomaly across all platforms, even macOS. To be even clearer, the same clipping behavior as the custom font can be seen with SF Pro, a font provided by Apple themselves here: https://developer.apple.com/fonts/
This question is about the most proper, least intrusive, and most complete way to do what is necessary to not clip diacritics. Meaning, how would you do this, ideally, from scratch.
All of my font research and test runs have led all those involved in this problem to believe that Apple has implemented special treatment specifically for their system fonts in UILabel, to avoid diacritic clipping. So making that an assumption, I'm also assuming the font is ok, and I'm looking for solutions that do not involve editing the font.
In my tries to use the font, the first thing to go wrong was vertical clipping of the ascender diacritics of Thai glyphs:
นื้ทั้มูHello
This means the glyphs of the font Thonburi when they cascade from the custom Latin-only font. The fix from this point, was to use a custom font only for Thai without any Latin characters, so it could be defined as the primary font, and cascade to the previously mentioned Latin-only custom font. After all this, the custom Thai font still has horizontal clipping issues on diacritics that come at the end of the text:
Worldฟล์
So now I am at a loss for anything further that font management puppetry can do (though still open to suggestions), and I am moving on to more code-centric fixes. I've seen quite a few questions and answers mentioning subclassing UILabel, but I'd like to know what this would look like that could accomplish what I've described.
I'd also like to know if just opting out of UILabel would be an option for anyone. Meaning would writing something from the ground up with TextKit be worth it to avoid all these bugs that seem to only plague iOS, and specifically UILabel.
At first I thought this was a problem with the framework but it's not, it's just a strict enforcement of a font's metrics. And in probably everything but web/app development, fonts are not rendered so strictly, which is why this problem rarely comes up. Fonts have a number of metrics that tell the program rendering it onto the screen how to render it, most importantly how to handle padding. And UILabel (and UITextField, and likely others) applies these metrics strictly. And the problem for us is that some fonts are very decorative and are often too thick or oblique to fit perfectly into the square canvas that each character must fit into (this is especially the case with accents, like umlauts). This isn't a problem outside of web/app development because when a character doesn't fit into its canvas, like a very thick, wide, and oblique W, the program just shows it anyway, and that's why a low-hanging g might spill into the line below it. But if that g was rendered in a single-line UILabel, because of how strict the font-metric enforcement is in iOS, that low-handing g is clipped.
Subclassing UILabel (in the case of UILabel) and overriding its intrinsicContentSize to add some extra padding is not a good idea, on further research. For one, it's kind of hacky, but more importantly, it produces constraint warnings in the debugger. The true fix, and the only acceptable fix AFAIK, is to edit the font's metrics.
Download a program like Glyphs (https://glyphsapp.com/), open the font, open the Font's Info, and in the Masters tab, give the font the proper ascender and descender values. To best understand how these values work, open the San Francisco font in the program and see how Apple did it (it's the font they made specifically for macOS and iOS development). As a side note, if you use this app, when you're editing the font's info, go into the Features tab as well, delete all of the features (using the minus icon in the lower left) and hit Update to let the program manage the font's features for you.
The last hurdle is clipping at the leading edge (not the top and bottom) which the ascender and descender metrics don't address. You can use the Glyphs program to edit the canvas size of individual characters to make sure they all fit but that changes the complexion of the font because it changes the character spacing too noticeably. For this problem, I think the best solution is to simply use attributed strings for your labels and text fields. And that's because attributed strings let you safely edit padding without hacking into intrinsic sizes. An example:
someLabel.attributedText = NSAttributedString(string: "Done", attributes: [NSAttributedString.Key.font: UIFont.blackItalic(size: 26), NSAttributedString.Key.foregroundColor: UIColor.black, NSAttributedString.Key.paragraphStyle: NSMutableParagraphStyle.kItalicCenter])
For convenience, I extended NSMutableParagraphStyle since I use this font all over:
extension NSMutableParagraphStyle {
static var kItalicCenter: NSMutableParagraphStyle {
let s = NSMutableParagraphStyle()
s.alignment = .center
s.firstLineHeadIndent = 2
s.headIndent = 2
return s
}
}
This label will push the font forward a couple of points to prevent clipping.
I was trying to solve similar problem with diacritics in Arabic and found workaround:
I have a UITableViewCell with UILabel with arabic text, it's diacritics were cut sometimes
I overrided - (void)drawRect:(CGRect)frame to directly draw NSAttributedString on UITableViewCell
Also I decreased alpha self.arabicLabel.alpha = 0.1; to draw manually on top of label position, I still keep it to calculate cell's height
- (void)drawRect:(CGRect)frame {
[super drawRect:frame];
if (self.viewModel == nil) return;
NSAttributedString *string = [self.viewModel arabicStringWithTajweed];
CGRect originalRect = [self convertRect:self.arabicLabel.frame fromView:self.arabicLabel];
[string drawInRect:originalRect];
}
The core problem on iOS is font substitution. You are specifying a latin font, the font does not contain glyphs for the characters that will be rendered, the system uses a different font to draw the glyphs, but it is still measuring based on the original font.
Option 1, the most robust option, is to manually choose fonts that include glyphs for the characters you will render. When the font assigned to UILabel, or the attributed string it is rendering, contains all the glyphs that will be rendered, and that font has good metrics as most system fonts do, then nothing will be clipped.
Option 2, manually measure the string using glyph bounds. Make a subclass of UILabel and override textRectForBounds and possibly drawText. Measure the string with .usesDeviceMetrics. This is slower that measuring by font metrics and produces different results. For example, the strings "a" and "A" will measure differently.
Option 3, use baseline offset and line height multiple to make room for the diacritics that are being clipped. Choose or compute constant values for each font for each language, and apply those to the attributed string of the UILabel. This can compensate for the different in font metrics between the font you chose and the font that is actually rendering glyphs. We had localized strings with the worst case clipped characters for each language, and used those to compute the offset and height. Different fonts have different worst case clipping characters.

Line fill for UITextView?

Is there a property that will apply the proper character spacing to have all the text on each line in an NSAttributedString butt up against the bounds like in a book, (including the final line which I know isn't done in books)? I know kerning can be adjusted, but that won't dynamically adjust on a per line basis. Any help would be appreciated. Also NSTextAlignmentJustified and NSTextAlignmentNatural get close, but won't apply the effect to the last line of text.
The only option is to use NSTextAlignmentJustified. Last line is never justified, because NSTextAlignmentJustified refers to Left Justification mode, as it is the standard case.
For more information you can take a look at Typographic Alignment on wikipedia : http://en.wikipedia.org/wiki/Typographic_alignment

How to draw a non-rectangle UILabel with paragraph truncation at the end?

I need to show a body of text similar to the one shown below and limited to the red non-rectangular area. Rob's answer to this question pretty much answers my question as well, but I also need to truncate at tail of the paragraph when the text is too long.
Extra question: is it also possible to set minimum font size similar to UILabel?
Try using NSString::sizeWithFont:constrainedToSize method which is documented here. You can specify the fontsize and maximum size for the text.
You can also calculate the minimum font size using NSString::sizeWithFont:minFontSize:actualFontSize:forWidth:lineBreakMode: method.

Means to get detailed font metrics?

I'm puzzling how to divine more font metrics from iOS. I can accomplish my very long single line of text by paging UIViews while scrolling. I can determine where to break the strings between views by iteratively calculating it with sizeToFont, but I need the inter-character spacing (i.e. advance width) to space them accurately.
Any ideas short of full fixed or monospaced fonts? Thanks.
The Core Text class CTFont gives you some access to glyph metrics. But really, you should try to just use Core Text to do your text rendering instead of asking it for measurements and calculating positions yourself.
CTFont Reference
Core Text Programming Guide

Character spacing in LaTeX with lstlisting package

I'm trying to get my code snippets to look as good as possible and so far I'm having troubles with the character spacing. Here is an example of the output:
alt text http://grab.by/grabs/2bb230de7c088d007733f52b95a40363.png
While the text in small is perfect, all the keywords that are in capital letters look terrible. Here are the settings I use
\lstset{basicstyle=\footnotesize, basewidth=0.5em}
If I increase the basewidth, the capital letters look good, but I can't get any decent sized line of code in one line. The following example does not fit in a page and I already put two line breaks in:
alt text http://grab.by/grabs/97ec29aa5a6811ce28bcd30bd389b52f.png
Does anyone have a clue how I can get this to work? Using \ttfamily does the trick, however, I'd prefer keeping the font.
Thanks.
If you prioritize looking nice, then using flexible colums is preferable:
\lstset{basicstyle=\footnotesize, columns=fullflexible}
You "obviously" need to scale the capital letters down horizontally. I do not know of a way to do this without actually editing the font itself.
However, you could put the entire listing into a \scalebox resp. \resizebox (from the graphicx package).
On a side note, the font you are using seems a bit strange, though, since the distance between small letters is significantly bigger than that between capital letters.

Resources