This is my story board:
Whenever I jump to a view controller embedded in navigation controller, the navigation bar is shown but empty, why?
The sequence I created it is:
connect buttons with destination view controllers
embed destination view controllers in navigation view controller
And the segue I use is present modally - cross dissolve.
The First root controllers of a navigation controller won't have any Back button attached to its navigation bar. You should add an additional View Controller next to any root View Controller of Navigation Controller with Push Segue ( or Show Segue for newer IOS ) to navigate between them.
I tested different segue transition methods with test projects, the answer I got is: if you are transitioning by presenting it modally, you don't get the back button, you only get it by push.
Related
I am using tab bar controller and i want to push uiview controller over tab bar controller. but i don't know how we push UIView controller over Tab Bar Controller. Thanks
You need to embed a navigation controller in your tab bar controller screen where you want the push set up to work
If I'm reading your question right, you want to push a view controller over another view controller which is currently displaying tabs.
In this case, I believe you would need a UINavigationController as your root view controller. Inside this navigation controller, you would initially push a UITabController with it's associated view controllers per tab. When it's time to push another view controller over the tab controller, create an instance of the view controller to push and use the following code:
[self.navigationController pushViewController:newViewController animated:YES];
This will push the new view controller over the existing TabController that is currently being displayed.
The question is little vague Hence I will add the two way to push to another view controller we use in common.
From navigation controller : You just need to create an UIButton in the navigation controller and then control + drag the button to another view controller to create a push feature to another screen in storyboard.
From Tab view Controller : Similarly, control key + drag the tab bar item in the tab bar controller to another UIView controller in the story board. Then chose 'show' option to create a push to another UIview controller screen.
Hope this helps.
Tab Bar controller is different and Navigation Bar controller is different.
And as Pittmaster says, your navigation view controller should be root view controller.
I am confused with behavior, I have Tab Bar Controller ( I enter on this controller from simple view controller which is embedded in navigation controller). I am confused why is that navigation bar from tab is covered up child navigation bar.
When I start app and I enter at Browse Controller I cannot see Browse title, neither nav bar items which I added programmatically. Can somebody give me clue what is wrong ( I am new to this, I connect with push segue from tab to browse).
Your problem appears to be the same as the one I addressed here:
Push segue from a view controller controlled by UITabBarController
What's happening is that your first NavigationController is creating a Navigation stack. Then you push-segue a TabViewController. That is added to the Nav stack, along with each of it's contained view controllers. However, when you PUSH SEGUE from one of those view controllers to some other view controller, the original navigation controller's stack is the one you are pushing on to. This is not contained inside the tab view controller, so the pushed view controller has no relationship with that tab view controller, just the original navigation controller stack. Therefore the tabs are not present.
The answer is to embed each of the tab controller's view controllers in a new navigation controller, and push on from those. The original navigation controller is just messing things up here...
Let's assume that a first view controller is connected with a UITabBarController and I want to make a push segue to the second view controller from this first view controller.
From my googling, it seems that a modal segue from a view controller connected with a UITabBarController hides the bottom tab bar, while a push segue doesn't.
However, my push segue is also hiding my tab bar in the second view controller. I have overridden prepareForSegue method in the first view controller.
Below are images of my storybard and the simulator. Anyone has an idea why this is the case? Thank you in advance for your helps.
Your trouble is because your tabViewController is embedded in the navigation stack that you initialise with your login screen.
you need to rearrange things so that each of your tab bar controller tabs opens to a new navigation stack.
What I suggest
your loginscreen should navigate to your tab bar controller with a modal/presenting segue, not a push segue. Remove the navController that encloses the loginscreen, you don't need it (well, even if you keep it, don't use a push segue, use a modal segue, and you won't then be referring back to that navController's viewController stack from inside your tab bar).
embed each of the first viewControllers in your tabViewCOntroller inside a separate navController.
Now you can push segue within your tabViewController's tabs.
Can someone explain to me what is the exact difference between modal and push segue?
I know that when we use push the segue gets added to a stack, so when we keep using push it keeps occupying memory?
Can someone please show me how these two are implemented?
Modal segues can be created by simply ctrl-click and dragging to destination but when I do that with the push my app crashes.
I am pushing from a button to a UINavigationController that has a UIViewController.
A push Segue is adding another VC to the navigation stack. This assumes that VC that originates the push is part of the same navigation controller that the VC that is being added to the stack belongs to. Memory management is not an issue with navigation controllers and a deep stack. As long as you are taking care of objects you might be passing from one VC to another, the runtime will take care of the navigation stack. See the image for a visual indication:
A modal Segue is just one VC presenting another VC modally. The VCs don't have to be part of a navigation controller and the VC being presented modally is generally considered to be a "child" of the presenting (parent) VC. The modally presented VC is usually sans any navigation bars or tab bars. The presenting VC is also responsible for dismissing the modal VC it created and presented.
Swift 3.0 and XCode 8.2.1 update
1. Push Segue
Push segue has been renamed as Show segue. To create push segue, the parent view controller needs to be embedded in navigation controller. The navigation controller provides navigation bar. Once you connect two view controller with push segue, the child view controller will automatically has navigation bar on top. The child view controller will be added on top of the navigation stack.
Push segue also provides default features. The child view controller will have a back button that gets you back to the parent view controller. You can also swipe right to pop the child view controller. The animation for push segue is like sliding pages horizontally.
While you are allowed to make a push segue from a view controller that is not in a navigation controller, you will lose all the features like navigation bar, animation, gesture etc when you do so. In this case, you should embed your parent view controller inside navigation view controller first and then make push segue to child view controllers.
2. Modal Segue
A modal segue (i.e. present modally), on the other hand, is presenting over the current view controller. The child view controller will not inherit navigation view controller so the navigation bar will be lost if you present modal segue from a view controller with navigation view controller. You have to embed the child view controller in navigation controller again and start a brand new navigation stack if you want it back. If you want to get back to parent view controller, you have to implement this by yourself and call dismiss from code.
Animation for modal segue is that the child view controller will comes up from the bottom of the page. The navigation view controller is also gone in this demo
The push view must be built in a navigationController.
Click on your master view, then in the menu bar choose:
EDITOR->embed in->navigationController
This is pushing controls using custom push and segue methods for storyboard
And Modal is way to navigate through views without using Storyboards.
I have a storyboard setup as a Tabbed Application with first view controller containing a
UITableView. The Protoype cell has a "push" segue to detail view which is embedded in a navigation controller. So far so good. The detail view pushes when a cell is selected and there is a navigation bar item to get back to the table view.
Now I run into trouble. The detail view has 2 buttons "Map" and "Ticket". If I create a new UIViewController, embed it in a navigation controller, and ctril-drag a 'push' segue from a button to the new view controller as before, the app crashes instantly with a SIGABRT when I click the button. If I don't embed in nav controller and use a 'modal' segue instead it doesn't crash but it seems a natural flow to continue with the 'horizontal slide' animation and the nav bar button back to the detail view.
Once I can stop that crashing I would like to connect the other button to it's own view controller with a UIMapView.
What am I doing wrong?
You don't need to embed a navigation controller in the detail view. You only need one at the top level. Take out the navigation controller in the detail view controller and just do a push from there to the next view.