I have a dataset of approx. 4800 rows with 22 attributes, all numerical, describing mostly the geometry of rock / minerals, and 3 different classes.
I tried out a cross validation with k-nn Model inside it, with k= 7 and Numerical Measure -> Camberra Distance as parameters set..and I got a performance of 82.53% and 0.673 kappa. Is that result representative for the dataset? I mean 82% is quite ok..
Before doing this, I evaluated the best subset of attributes with a decision table, I got out 6 different attributes for that.
the problem is, you still don't learn much from that kind of models, like instance-based k-nn. Can I get any more insight from knn? I don't know how to visualize the clusters in that high dimensional space in Rapidminer, is that somehow possible?
I tried decision tree on the data, but I got too much branches (300 or so) and it looked all too messy, the problem is, all numerical attributes have about the same mean and distribution, therefore its hard to get a distinct subset of meaningful attributes...
ideally, the staff wants to "Learn" something about the data, but my impression is, that you cannot learn much meaningful of that data, all that works best is "Blackbox" Learning models like Neural Nets, SVM, and those other instance-based models...
how should I proceed?
Welcome to the world of machine learning! This sounds like a classic real-world case: we want to make firm conclusions, but the data rows don't cooperate. :-)
Your goal is vague: "learn something"? I'm taking this to mean that you're investigating, hoping to find quantitative discriminations among the three classes.
First of all, I highly recommend Principal Component Analysis (PCA): find out whether you can eliminate some of these attributes by automated matrix operations, rather than a hand-built decision table. I expect that the messy branches are due to unfortunate choice of factors; decision trees work very hard at over-fitting. :-)
How clean are the separations of the data sets? Since you already used Knn, I'm hopeful that you have dense clusters with gaps. If so, perhaps a spectral clustering would help; these methods are good at classifying data based on gaps between the clusters, even if the cluster shapes aren't spherical. Interpretation depends on having someone on staff who can read eigenvectors, to interpret what the values mean.
Try a multi-class SVM. Start with 3 classes, but increase if necessary until your 3 expected classes appear. (Sometimes you get one tiny outlier class, and then two major ones get combined.) The resulting kernel functions and the placement of the gaps can teach you something about your data.
Try the Naive Bayes family, especially if you observe that the features come from a Gaussian or Bernoulli distribution.
As a holistic approach, try a neural net, but use something to visualize the neurons and weights. Letting the human visual cortex play with relationships can help extract subtle relationships.
Related
I have used a ML approach to my research using python scikit-learn. I found that SVM and logistic regression classifiers work best (eg: 85% accuracy), decision trees works markedly worse (65%), and then Naive Bayes works markedly worse (40%).
I will write up the conclusion to illustrate the obvious that some ML classifiers worked better than the others by a large margin, but what else can I say about my learning task or data structure based on these observations?
Edition:
The data set involved 500,000 rows, and I have 15 features but some of the features are various combination of substrings of certain text, so it naturally expands to tens of thousands of columns as a sparse matrix. I am using people's name to predict some binary class (eg: Gender), though I feature engineer a lot from the name entity like the length of the name, the substrings of the name, etc.
I recommend you to visit this awesome map on choosing the right estimator by the scikit-learn team http://scikit-learn.org/stable/tutorial/machine_learning_map
As describing the specifics of your own case would be an enormous task (I totally understand you didn't do it!) I encourage you to ask yourself several questions. Thus, I think the map on 'choosing the right estimator' is a good start.
Literally, go to the 'start' node in the map and follow the path:
is my number of samples > 50?
And so on. In the end you might end at some point and see if your results match with the recommendations in the map (i.e. did I end up in a SVM, which gives me better results?). If so, go deeper into the documentation and ask yourself why is that one classifier performing better on text data or whatever insight you get.
As I told you, we don't know the specifics of your data, but you should be able to ask such questions: what type of data do I have (text, binary, ...), how many samples, how many classes to predict, ... So ideally your data is going to give you some hints about the context of your problem, therefore why some estimators perform better than others.
But yeah, your question is really broad to grasp in a single answer (and specially without knowing the type of problem you are dealing with). You could also check if there might by any of those approaches more inclined to overfit, for example.
The list of recommendations could be endless, this is why I encourage you to start defining the type of problem you are dealing with and your data (plus to the number of samples, is it normalized? Is it disperse? Are you representing text in sparse matrix, are your inputs floats from 0.11 to 0.99).
Anyway, if you want to share some specifics on your data we might be able to answer more precisely. Hope this helped a little bit, though ;)
I've got a problem where I've potentially got a huge number of features. Essentially a mountain of data points (for discussion let's say it's in the millions of features). I don't know what data points are useful and what are irrelevant to a given outcome (I guess 1% are relevant and 99% are irrelevant).
I do have the data points and the final outcome (a binary result). I'm interested in reducing the feature set so that I can identify the most useful set of data points to collect to train future classification algorithms.
My current data set is huge, and I can't generate as many training examples with the mountain of data as I could if I were to identify the relevant features, cut down how many data points I collect, and increase the number of training examples. I expect that I would get better classifiers with more training examples given fewer feature data points (while maintaining the relevant ones).
What machine learning algorithms should I focus on to, first,
identify the features that are relevant to the outcome?
From some reading I've done it seems like SVM provides weighting per feature that I can use to identify the most highly scored features. Can anyone confirm this? Expand on the explanation? Or should I be thinking along another line?
Feature weights in a linear model (logistic regression, naive Bayes, etc) can be thought of as measures of importance, provided your features are all on the same scale.
Your model can be combined with a regularizer for learning that penalises certain kinds of feature vectors (essentially folding feature selection into the classification problem). L1 regularized logistic regression sounds like it would be perfect for what you want.
Maybe you can use PCA or Maximum entropy algorithm in order to reduce the data set...
You can go for Chi-Square tests or Entropy depending on your data type. Supervized discretization highly reduces the size of your data in a smart way (take a look into Recursive Minimal Entropy Partitioning algorithm proposed by Fayyad & Irani).
If you work in R, the SIS package has a function that will do this for you.
If you want to do things the hard way, what you want to do is feature screening, a massive preliminary dimension reduction before you do feature selection and model selection from a sane-sized set of features. Figuring out what is the sane-size can be tricky, and I don't have a magic answer for that, but you can prioritize what order you'd want to include the features by
1) for each feature, split the data in two groups by the binary response
2) find the Komogorov-Smirnov statistic comparing the two sets
The features with the highest KS statistic are most useful in modeling.
There's a paper "out there" titled "A selctive overview of feature screening for ultrahigh-dimensional data" by Liu, Zhong, and Li, I'm sure a free copy is floating around the web somewhere.
4 years later I'm now halfway through a PhD in this field and I want to add that the definition of a feature is not always simple. In the case that your features are a single column in your dataset, the answers here apply quite well.
However, take the case of an image being processed by a convolutional neural network, for example, a feature is not one pixel of the input, rather it's much more conceptual than that. Here's a nice discussion for the case of images:
https://medium.com/#ageitgey/machine-learning-is-fun-part-3-deep-learning-and-convolutional-neural-networks-f40359318721
I am new in machine learning. My problem is to make a machine to select a university for the student according to his location and area of interest. i.e it should select the university in the same city as in the address of the student. I am confused in selection of the algorithm can I use Perceptron algorithm for this task.
There are no hard rules as to which machine learning algorithm is the best for which task. Your best bet is to try several and see which one achieves the best results. You can use the Weka toolkit, which implements a lot of different machine learning algorithms. And yes, you can use the perceptron algorithm for your problem -- but that is not to say that you would achieve good results with it.
From your description it sounds like the problem you're trying to solve doesn't really require machine learning. If all you want to do is match a student with the closest university that offers a course in the student's area of interest, you can do this without any learning.
I second the first remark that you probably don't need machine learning if the student has to live in the same area as the university. If you want to use an ML algorithm, maybe it would best to think about what data you would have to start with. The thing that comes to mind is a vector for a university that has certain subjects/areas for each feature. Then compute a distance from a vector which is like an ideal feature vector for the student. Minimize this distance.
The first and formost thing you need is a labeled dataset.
It sounds like the problem could be decomposed into a ML problem however you first need a set of positive and negative examples to train from.
How big is your dataset? What features do you have available? Once you answer these questions you can select an algorithm that bests fits the features of your data.
I would suggest using decision trees for this problem which resembles a set of if else rules. You can just take the location and area of interest of the student as conditions of if and else if statements and then suggest a university for him. Since its a direct mapping of inputs to outputs, rule based solution would work and there is no learning required here.
Maybe you can use a "recommender system"or a clustering approach , you can investigate more deeply the techniques like "collaborative filtering"(recommender system) or k-means(clustering) but again, as some people said, first you need data to learn from, and maybe your problem can be solved without ML.
Well, there is no straightforward and sure-shot answer to this question. The answer depends on many factors like the problem statement and the kind of output you want, type and size of the data, the available computational time, number of features, and observations in the data, to name a few.
Size of the training data
Accuracy and/or Interpretability of the output
Accuracy of a model means that the function predicts a response value for a given observation, which is close to the true response value for that observation. A highly interpretable algorithm (restrictive models like Linear Regression) means that one can easily understand how any individual predictor is associated with the response while the flexible models give higher accuracy at the cost of low interpretability.
Speed or Training time
Higher accuracy typically means higher training time. Also, algorithms require more time to train on large training data. In real-world applications, the choice of algorithm is driven by these two factors predominantly.
Algorithms like Naïve Bayes and Linear and Logistic regression are easy to implement and quick to run. Algorithms like SVM, which involve tuning of parameters, Neural networks with high convergence time, and random forests, need a lot of time to train the data.
Linearity
Many algorithms work on the assumption that classes can be separated by a straight line (or its higher-dimensional analog). Examples include logistic regression and support vector machines. Linear regression algorithms assume that data trends follow a straight line. If the data is linear, then these algorithms perform quite good.
Number of features
The dataset may have a large number of features that may not all be relevant and significant. For a certain type of data, such as genetics or textual, the number of features can be very large compared to the number of data points.
I am doing the text categorization machine learning problem using Naive Bayes. I have each word as a feature. I have been able to implement it and I am getting good accuracy.
Is it possible for me to use tuples of words as features?
For example, if there are two classes, Politics and sports. The word called government might appear in both of them. However, in politics I can have a tuple (government, democracy) whereas in the class sports I can have a tuple (government, sportsman). So, if a new text article comes in which is politics, the probability of the tuple (government, democracy) has more probability than the tuple (government, sportsman).
I am asking this is because by doing this am I violating the independence assumption of the Naive Bayes problem, because I am considering single words as features too.
Also, I am thinking of adding weights to features. For example, a 3-tuple feature will have less weight than a 4-tuple feature.
Theoretically, are these two approaches not changing the independence assumptions on the Naive Bayes classifier? Also, I have not started with the approach I mentioned yet but will this improve the accuracy? I think the accuracy might not improve but the amount of training data required to get the same accuracy would be less.
Even without adding bigrams, real documents already violate the independence assumption. Conditioned on having Obama in a document, President is much more likely to appear. Nonetheless, naive bayes still does a decent job at classification, even if the probability estimates it gives are hopelessly off. So I recommend that you go on and add more complex features to your classifier and see if they improve accuracy.
If you get the same accuracy with less data, that is basically equivalent to getting better accuracy with the same amount of data.
On the other hand, using simpler, more common features works better as you decrease the amount of data. If you try to fit too many parameters to too little data, you tend to overfit badly.
But the bottom line is to try it and see.
No, from a theoretical viewpoint, you are not changing the independence assumption. You are simply creating a modified (or new) sample space. In general, once you start using higher n-grams as events in your sample space, data sparsity becomes a problem. I think using tuples will lead to the same issue. You will probably need more training data, not less. You will probably also have to give a little more thought to the type of smoothing you use. Simple Laplace smoothing may not be ideal.
Most important point, I think, is this: whatever classifier you are using, the features are highly dependent on the domain (and sometimes even the dataset). For example, if you are classifying sentiment of texts based on movie reviews, using only unigrams may seem to be counterintuitive, but they perform better than using only adjectives. On the other hand, for twitter datasets, a combination of unigrams and bigrams were found to be good, but higher n-grams were not useful. Based on such reports (ref. Pang and Lee, Opinion mining and Sentiment Analysis), I think using longer tuples will show similar results, since, after all, tuples of words are simply points in a higher-dimensional space. The basic algorithm behaves the same way.
How should I approach a situtation when I try to apply some ML algorithm (classification, to be more specific, SVM in particular) over some high dimensional input, and the results I get are not quite satisfactory?
1, 2 or 3 dimensional data can be visualized, along with the algorithm's results, so you can get the hang of what's going on, and have some idea how to aproach the problem. Once the data is over 3 dimensions, other than intuitively playing around with the parameters I am not really sure how to attack it?
What do you do to the data? My answer: nothing. SVMs are designed to handle high-dimensional data. I'm working on a research problem right now that involves supervised classification using SVMs. Along with finding sources on the Internet, I did my own experiments on the impact of dimensionality reduction prior to classification. Preprocessing the features using PCA/LDA did not significantly increase classification accuracy of the SVM.
To me, this totally makes sense from the way SVMs work. Let x be an m-dimensional feature vector. Let y = Ax where y is in R^n and x is in R^m for n < m, i.e., y is x projected onto a space of lower dimension. If the classes Y1 and Y2 are linearly separable in R^n, then the corresponding classes X1 and X2 are linearly separable in R^m. Therefore, the original subspaces should be "at least" as separable as their projections onto lower dimensions, i.e., PCA should not help, in theory.
Here is one discussion that debates the use of PCA before SVM: link
What you can do is change your SVM parameters. For example, with libsvm link, the parameters C and gamma are crucially important to classification success. The libsvm faq, particularly this entry link, contains more helpful tips. Among them:
Scale your features before classification.
Try to obtain balanced classes. If impossible, then penalize one class more than the other. See more references on SVM imbalance.
Check the SVM parameters. Try many combinations to arrive at the best one.
Use the RBF kernel first. It almost always works best (computationally speaking).
Almost forgot... before testing, cross validate!
EDIT: Let me just add this "data point." I recently did another large-scale experiment using the SVM with PCA preprocessing on four exclusive data sets. PCA did not improve the classification results for any choice of reduced dimensionality. The original data with simple diagonal scaling (for each feature, subtract mean and divide by standard deviation) performed better. I'm not making any broad conclusion -- just sharing this one experiment. Maybe on different data, PCA can help.
Some suggestions:
Project data (just for visualization) to a lower-dimensional space (using PCA or MDS or whatever makes sense for your data)
Try to understand why learning fails. Do you think it overfits? Do you think you have enough data? Is it possible there isn't enough information in your features to solve the task you are trying to solve? There are ways to answer each of these questions without visualizing the data.
Also, if you tell us what the task is and what your SVM output is, there may be more specific suggestions people could make.
You can try reducing the dimensionality of the problem by PCA or the similar technique. Beware that PCA has two important points. (1) It assumes that the data it is applied to is normally distributed and (2) the resulting data looses its natural meaning (resulting in a blackbox). If you can live with that, try it.
Another option is to try several parameter selection algorithms. Since SVM's were already mentioned here, you might try the approach of Chang and Li (Feature Ranking Using Linear SVM) in which they used linear SVM to pre-select "interesting features" and then used RBF - based SVM on the selected features. If you are familiar with Orange, a python data mining library, you will be able to code this method in less than an hour. Note that this is a greedy approach which, due to its "greediness" might fail in cases where the input variables are highly correlated. In that case, and if you cannot solve this problem with PCA (see above), you might want to go to heuristic methods, which try to select best possible combinations of predictors. The main pitfall of this kind of approaches is the high potential of overfitting. Make sure you have a bunch "virgin" data that was not seen during the entire process of model building. Test your model on that data only once, after you are sure that the model is ready. If you fail, don't use this data once more to validate another model, you will have to find a new data set. Otherwise you won't be sure that you didn't overfit once more.
List of selected papers on parameter selection:
Feature selection for high-dimensional genomic microarray data
Oh, and one more thing about SVM. SVM is a black box. You better figure out what is the mechanism that generate the data and model the mechanism and not the data. On the other hand, if this would be possible, most probably you wouldn't be here asking this question (and I wouldn't be so bitter about overfitting).
List of selected papers on parameter selection
Feature selection for high-dimensional genomic microarray data
Wrappers for feature subset selection
Parameter selection in particle swarm optimization
I worked in the laboratory that developed this Stochastic method to determine, in silico, the drug like character of molecules
I would approach the problem as follows:
What do you mean by "the results I get are not quite satisfactory"?
If the classification rate on the training data is unsatisfactory, it implies that either
You have outliers in your training data (data that is misclassified). In this case you can try algorithms such as RANSAC to deal with it.
Your model(SVM in this case) is not well suited for this problem. This can be diagnozed by trying other models (adaboost etc.) or adding more parameters to your current model.
The representation of the data is not well suited for your classification task. In this case preprocessing the data with feature selection or dimensionality reduction techniques would help
If the classification rate on the test data is unsatisfactory, it implies that your model overfits the data:
Either your model is too complex(too many parameters) and it needs to be constrained further,
Or you trained it on a training set which is too small and you need more data
Of course it may be a mixture of the above elements. These are all "blind" methods to attack the problem. In order to gain more insight into the problem you may use visualization methods by projecting the data into lower dimensions or look for models which are suited better to the problem domain as you understand it (for example if you know the data is normally distributed you can use GMMs to model the data ...)
If I'm not wrong, you are trying to see which parameters to the SVM gives you the best result. Your problem is model/curve fitting.
I worked on a similar problem couple of years ago. There are tons of libraries and algos to do the same. I used Newton-Raphson's algorithm and a variation of genetic algorithm to fit the curve.
Generate/guess/get the result you are hoping for, through real world experiment (or if you are doing simple classification, just do it yourself). Compare this with the output of your SVM. The algos I mentioned earlier reiterates this process till the result of your model(SVM in this case) somewhat matches the expected values (note that this process would take some time based your problem/data size.. it took about 2 months for me on a 140 node beowulf cluster).
If you choose to go with Newton-Raphson's, this might be a good place to start.