Enviornment - Source server#Wildlfy_9.0.2.Final,Destination_Server#Jboss5.x, EJB3.0,BuildingTool#ant
1.Wildfly to Wildfly EJB client without remote-outbound-connections
2.https://docs.jboss.org/author/display/WFLY9/Developer+Guide#DeveloperGuide-EJBinvocationsfromaremoteserver
From above two link i have successfully remote EJB lookup for Wildfly_9.0.2.Final to Wildfly_9.0.2.Final server. After this i want to replace destination server to Jboss 5.x server. I have spent hours looking for tutorials on Google. However I cannot seem to find anything that holds the hand. Can anyone direct me to some link?
You have to add an extension for this as the JNDI lokup has changed between AS5 (jnp) and WildFly. I don't know what is thge current status of https://github.com/jboss-set/jboss-as-legacy but this was the goal of this extension.
Related
I'm running Artifactory CPP CE 7.7.3 and Traefik v2.2 using docker-compose. The service is only available over http://localhost/ui/. Now, what I need is an option which allows to add a URL path-prefix (e. g. http://localhost/artifactroy/ui).
My Setup
I used the described setup process from the Artifactory Docs suggest it.
My docker.compose.yaml is the official extracted from the jfrog-artifactory-cpp-ce-7.7.3-compose.tar.gz: ./templates/docker-compose.yaml.
I'm using a reverse proxy (traefik). For this, I've added the necessary traefik configuration lines to the docker-compose-file. Here is a small extract what I've added:
[...]
labels:
- "traefik.http.routers.artifactory.rule=Host(`localhost`) && PathPrefix(`/ui`)"
- "traefik.http.routers.artifactory.middlewares=artifactory-stripprefix"
- "traefik.http.middlewares.artifactory-stripprefix.stripprefix.prefixes=/"
- "traefik.http.services.artifactory.loadbalancer.server.port=8082"
With this I managed to access artifactory over http://localhost/ui/.
Problem:
I have multiple small services running on my server, each of this service is accusable via http://localhost/<service-name>. This is very convenient and want to make clear that this URL is related to this service on my production server.
Because of this, I want to have an URL like http://localhost/artifactroy/ui/... instead of http://localhost/ui/...
I struggled getting artifactory setup in that way. I already managed to get a redirection from typing e. g. http://localhost/artifactroy/ to http://localhost/ui/ but this is not what I want on my production server.
What I did
Went through the documentation in hope of finding an option which I just can passt to artifactroy to add a prefix (Not successful).
Tried configure traefik two full days, to alter headers to get the repose point to http://localhost/artifactroy/ui/... (Only partially successful, redirection didn’t work afterwards)
Tried finding the configuration which is responsible for configure artifactory in $JFROG_HOME/artifactory/var/etc (Not successful)
Is this even possible? Help is highly appreciated..
This example (even though not traefic example) gives you a direction to implement it. There are certain routes already used within the product. You need to add a context over and above it to ensure all comes via the new context path.
https://jfrog.com/knowledge-base/how-to-remove-artifactory-from-the-context-url-in-artifactory-7/
I had created a web application and committed the code in CVS. The web application is working good in my machine. When i tried to import the same code in another machine i am getting 404 error. I tried importing the code via ftp from my machine to another machine and also checking out the code from CVS. But still i get 404 error.
I also noticed that there is no error that had been captured in the console or in the application's log. Could someone help me in how to proceed further in identifying the issue. Please let me know if i need to post any further details regarding the issue.
I notice this issue to be in the Websphere server. I tried hosting the application in different machine and found that in few machine the same code is working good and some it is not. Is there any way to compare the server configuration?
In the WAS server 6.1 i added the below value in the web container and the application worked fine.
Steps:
In the server admin console, click on Application Server--> --> Web container--> custom properties.
Add the name as com.ibm.ws.webcontainer.invokefilterscompatibility and value as true.
Thank you all for the response.
So I have an application that works perfectly on my desktop, and also works perfectly when deployed to tomcat on a windows machine. However, when I attempt to use this application while deployed on the same version of tomcat, but on AIX, it fails to retrieve data out of LDAP.
A user is able to successfully authenticate, but the context is null. DirContextOperations is passed into my ContextMapper as null. Does anyone know what ports that need to be open to get this data or what other configuration may need to be done? Based on what I am seeing it has to be a server configuration issue somewhere.
If you are using Spring Security LDAP plugin then it will be easy to co-relate the below mentioned configuration in AIX with the app. I prepared few snapshots for the configuration so that I do not clutter the answer space here. Have a look at LDAP config in AIX and try to setup the same in AIX Server.
Now coming to the LDAP plugin, there is nothing much other than setting up a bunch of properties is required. Values for these properties will be available once the LDAP configuration is done in AIX (as mentioned in the above mentioned slide).
Note:-
After creating a standalone LDAP, you might need to add realm if the user is associated to a group. I have not mentioned the same in the slides since I do not have an active LDAP host available now.
UPDATE
Instead of using BindAuthenticator can you try switching to PasswordComparisonAuthenticator for authentication.
Using the below setting in Config forces to use PasswordComparisonAuthenticator to authenticate and return back the DirContextOperations. Can this setting be tried?
grails.plugins.springsecurity.ldap.authenticator.useBind = false
#Refer LdapAuthentication Implementations.
I am not sure if this will be the answer in your case. I was also getting null in DirContextOperations object when trying to obtain values from Active Directory.
I was trying to get ldap attributes like this as the Grails LDAP plugin Documentation states:
String mail = ctx.originalAttrs.attrs['mail'].values[0]
and all those were null. So I have changed the line above for this one instead and it works for me:
String mail = ctx.attributes.getAt('mail').values[0].toString()
I have been able to build rabbitmq server on ubuntu linux. It came already prepackaged and on making, it is able to start as a service. When i got the client source, i failed to make because it appeared like it needed a folder called ./deps/rabbitmq-server. Analysing the code, i find that the author of the client was accessing the same header files as are found in the server, using include_lib("path to rabbit.hrl e.t.c") in his header file called "amqp_client.hrl". I then decided to add rabbitmq_server in the lib dir of erlang so as its paths are automatically added on start up of the vm. But still this didnot help. There is also another folder which the client references called "rabbit_common" for an include folder he assumes would contain all the .hrl files there. Please assist me in building both the client and server on my ubuntu server, for testing.
Also, if anyone has used RabbitMQ server for IMs, please provide some benchmarks and/or your findings on its throughput, speed and number of users. How can it be compared to ejabberd?. How can one create AJAX/Jquery/Javascript clients for Web functionality?
thanks
I hope you had made some progress as far as RabbitMQ and ejabberd are concerned.
Below is a link to an interesting discussion that might be of help.
http://old.nabble.com/AMPQ-vs-XMPP-and-RabbitMQ-vs-ejabberd-td17587109.html
For some reason, i can not invoke java method deployed under Tomcat/Weborb application. When i run weborb console and invoke the method from there, there is no problem. However when i tried to call from Silverlight 3 client, it does not response at all. There is one possibility which is incorrect service gateway. But i have checked the server path to make sure it is correct. I also tried different approaches to invoke server call such as proxy and class interface mentioned inside weborb documentation. I'm stuck with this problem for two days already and can not progress any further. Is there any common mistake when it comes to this problem? Any help would appreciate.
Cheers,
Khoa Nguyen
I found the solution. This is because the gateway mapping is incorrect. For instance, When deploy under weborb, the client use localhost:8080/weborb.wo. However when you deploy underworb, the gateway mapping is now change to something like localhost:8080/weborb/console/weborb.wo something like that. You can see how your request mapped to by run the weborb console and look at the server status as you invoke your java methods.
Hope this help.
Cheers,
Khoa Nguyen
There is a new WebORB for Java 4.1 release available that fixes this mapping issue. In addition, the new code generator creates a complete client class library with complex types, enums, bindable model and proxy class for the remote Java service. The release is available here:http://www.themidnightcoders.com/products.html