I plan to build a sequencer using audioKit.
I would like to generate midiNotes on the fly according to user interactions, so I'd like to be able to record and play midi but not only (I'd like to record some time stamped objects as well).
I guess I have to set a recursive loop with a delay somewhere, but I don't know what is the best way to have a stable clock that I could control remotely (stop or suspend, change tempo...).
Is there some components already implemented in audioKit to achieve this?
Or should I use some system components (Grand central Dispatch or NSTimer...)
Any suggestion is welcome,
Thanks :-)
I got an answer from Aurelius Prochazka (AudioKit Developper)
"AKOperations can't trigger arbitrary code."
I found a solution using "dispatch_after" in swift that seems to do the trick.
(stable even in playground with a clock set to 1 ms per tick)
But after digging the web and according to Aurelius, using CADisplayLink seems to be more appropriate to have a stable clock.
There's an example in AudioKit playgrounds of a triggering clock (AKPlaygroundLoop.swift in AudioKit.playground/Sources folder)
Related
I'm having trouble controlling third-party AUv3 instruments with MIDI using AVAudioSequencer (iOS 12.1.4, Swift 4.2, Xcode 10.1) and would appreciate your help.
What I'm doing currently:
Get all AUs of type kAudioUnitType_MusicDevice.
Instantiate one and connect it to the AVAudioEngine.
Create some notes, and put them on a MusicTrack.
Hand the track data over to an AVAudioSequencer connected to the engine.
Set the destinationAudioUnit of the track to my selected Audio Unit.
So far, so good, but...
When I play the sequence using AVAudioSequencer it plays fine the first time, using the selected Audio Unit. On the second time I get either silence, or a sine wave sound (and I wonder who is making that). I'm thinking the Audio Unit should not be going out of scope in between playbacks of the sequence, but I do stop the engine and restart it again for the new round. (But it should even be possible to swap AUs while the engine is running, so I think this is OK.)
Are there some steps that I'm missing? I would love to include code, but it is really hard to condense it down to its essence from a wall of text. But if you want to ask for specifics, I can answer. Or if you can point me to a working example that shows how to reliably send MIDI to AUv3 using AVAudioSequencer, that would be great.
Is AVAudioSequencer even supposed to work with other Audio Units than Apple's? Or should I start looking for other ways to send MIDI over to AUv3?
I should add that I can consistently send MIDI to the AUv3 using the InstrumentPlayer method from Apple's AUv3Host sample, but that involves a concurrent thread, and results in all sorts of UI sync and timing problems.
EDIT: I added an example project to GitHub:
https://github.com/jerekapyaho/so54753738
It seems that it's now working in iPadOS 13.7, but I don't think I'm doing anything that different than earlier, except this loads a MIDI file from the bundle, instead of generating it from data on the fly.
If someone still has iOS 12, it would be interesting to know if it's broken there, but working on iOS 13.x (x = ?)
In case you are using AVAudioUnitSampler as an audio unit instrument, the sine tone happens when you stop and start the audio engine without reloading the preset. Whenever you start the engine you need to load any instruments back into the sampler (e.g. a SoundFont), otherwise you may hear the sine. This is an issue with the Apple AUSampler, not with 3rd party instruments.
Btw you can test it under iOS 12 using the simulator.
I'm using an app that records audio and streams it to another user. It's basically a VoIP call. The problem I'm running into is that the audio I'm streaming to the peer is delayed by about 0.5 seconds. This is quite noticeable, and a little annoying when you both try to talk at the same time.
I'm wondering if this is common among AVFoundation's AVAudioEngine, or if possibly it's something to do with the way I set it up.
I can include source code if this is NOT a known problem with AVAudioEngine, otherwise can you please suggest the best route to record audio with the least delay?
I would also prefer something that is fairly high-level, and compatible with swift 3/3.1. However, if there is not a solution that meets these needs, then recommend the tool you think seems best fit.
Thank you!
Ensure that you call "AVAudioEngine.inputNode.installTap" function with the minimum supported bufferSize of 100 ms or (sampleRate * 0.1) samples.
I need to set a callback that will be called every pre-set time, according to a definition in a configuration file - suppose every 10 hours, by using the ACE library. I tried to use ACE_reactor and it seems to work, but it makes the application collapse after about 30 minutes of idle activity. I guess there's a way to do the same by using a timer, but so far I couldn't find a good code sample that demonstrates how to do it. Does anybody know how to do it by using C++ and ACE library? Does ACE have something equivalent to SetWaitableTimer() of Win API?
The ACE Reactor is the way to schedule timers, it works perfect at our side, are you sure you specify the correct timeout?
I'm designing a simple proof of concept for multitrack recorder.
Obvious starting point is to play from file A.caf to headphones while simultaneously recording microphone input into file B.caf
This question -- Record and play audio Simultaneously -- points out that there are three levels at which I can work:
AVFoundation API (AVAudioPlayer + AVAudioRecorder)
Audio Queue API
Audio Unit API (RemoteIO)
What is the best level to work at? Obviously the generic answer is to work at the highest level that gets the job done, which would be AVFoundation.
But I'm taking this job on from someone who gave up due to latency issues (he was getting a 0.3sec delay between the files), so maybe I need to work at a lower level to avoid these issues?
Furthermore, what source code is available to springboard from? I have been looking at SpeakHere sample ( http://developer.apple.com/library/ios/#samplecode/SpeakHere/Introduction/Intro.html ). if I can't find something simpler I will use this.
But can anyone suggest something simpler/else? I would rather not work with C++ code if I can avoid it.
Is anyone aware of some public code that uses AVFoundation to do this?
EDIT: AVFoundation example here: http://www.iphoneam.com/blog/index.php?title=using-the-iphone-to-record-audio-a-guide&more=1&c=1&tb=1&pb=1
EDIT(2): Much nicer looking one here: http://www.switchonthecode.com/tutorials/create-a-basic-iphone-audio-player-with-av-foundation-framework
EDIT(3): How do I record audio on iPhone with AVAudioRecorder?
To avoid latency issues, you will have to work at a lower level than AVFoundation alright. Check out this sample code from Apple - Auriotouch. It uses Remote I/O.
As suggested by Viraj, here is the answer.
Yes, you can achieve very good results using AVFoundation. Firstly you need to pay attention to the fact that for both the player and the recorder, activating them is a two step process.
First you prime it.
Then you play it.
So, prime everything. Then play everything.
This will get your latency down to about 70ms. I tested by recording a metronome tick, then playing it back through the speakers while holding the iPhone up to the speakers and simultaneously recording.
The second recording had a clear echo, which I found to be ~70ms. I could have analysed the signal in Audacity to get an exact offset.
So in order to line everything up I just performSelector:x withObject: y afterDelay: 70.0/1000.0
There may be hidden snags, for example the delay may differ from device to device. it may even differ depending on device activity. It is even possible the thread could get interrupted/rescheduled in between starting the player and starting the recorder.
But it works, and is a lot tidier than messing around with audio queues / units.
I had this problem and I solved it in my project simply by changing the PreferredHardwareIOBufferDuration parameter of the AudioSession. I think I have just 6ms latency now, that is good enough for my app.
Check this answer that has a good explanation.
am newbie for multimedia work.i want to capture audio by samples and transfer to some other ios device via network.how to start my work??? .i have just gone through apple multi media guide and speakhere example ,it is full of c++ code and they are writing in file and then start services ,but i need buffer...please help me to start my work in correct way .
Thanks in advance
I just spent a bunch of time working on real time audio stuff you can use AudioQueue but it has latency issues around 100-200ms.
If you want to do something like the t-pain app, you have to use
RemoteIO API
Audio Unit API
They are equally difficult to implement, so I would just pick the remote IO path.
Source can be found here:
http://atastypixel.com/blog/using-remoteio-audio-unit/
I have upvoted the answer above, but I wanted to add a piece of information that took me a while to figure out. When using AudioQueue for recording, the intuitive notion is that the callback is done in regular intervals of whatever the number of samples represent. That notion is incorrect, AudioQueue seems to gather the samples for a long period of time, then deliver them in very fast iterations of the callback.
In my case, I was doing 20ms samples, and receiving 320 samples per callback. When printing out the timestamps for the call, I noticed a pattern of: 1 call every 2 ms, then after a while one call of ~180ms. Since I was doing VoIP, this presented the symptom of an increasing delay on the receiving end. Switching to Remote I/O seems to have solved the issue.