I just did install Eurika library from xmartslab
I already googled this problem, unfortunally found nothing
As usual added it to my Podfile:
source 'https://github.com/CocoaPods/Specs.git'
platform :ios, '8.0'
use_frameworks!
target 'Project' do
pod 'Alamofire', '~> 3.0'
pod 'SDWebImage', '~>3.7'
pod 'ObjectMapper', '~> 1.1'
pod 'Eureka', '~> 1.5'
pod 'SDWebImage', '~>3.7'
end
After installation I got a bunch of errors:
What can cause this problem. Could it be any incompatibility with other libraries?
I suppose you are using Xcode 7.2 or older. You will have to upgrade to Xcode 7.3 or change your Podfile to pod 'Eureka', '~> 1.4.1'
Related
i am relatively new in ios, especially cocoa pods. i ran into a problem,somehow the IgListKit dependency is un-importable, I already clean build, build 1st then add the import, even deleting the xcworkplace and adding a new one by doing pod install
How do I fix it? is it an issue within the Pod? should I file an error? Thank you
How I add the dependencies :
# Uncomment the next line to define a global platform for your project
platform :ios, '12.0'
target 'LearnViper' do
pod 'Alamofire', '~> 5.4'
pod 'RxSwift', '6.2.0'
pod 'RxCocoa', '6.2.0'
pod 'Kingfisher', '~> 7.0'
pod 'SkeletonView'
pod 'IGListKit', '~> 4.0.0'
end
platform :ios, '12.0'
target 'LearnViper' do
use_frameworks!
pod 'Alamofire', '~> 5.4'
pod 'RxSwift', '6.2.0'
pod 'RxCocoa', '6.2.0'
pod 'Kingfisher', '~> 7.0'
pod 'SkeletonView'
pod 'IGListKit', '~> 4.0.0'
end
you have to update your gem file with command first
sudo gem install -n /usr/local/bin cocoapods
then after that open podfile add pods and install
Looks like all you have to do is add
use_frameworks! in your pod file
Is there a way to format this pod file for the latest version of Xcode? Build errors with Afnetworking occur only after adding the below code to an existing application's pod file and running the pod install command from the terminal.
platform :ios, '9.0'
target 'PushChatStarter' do
use_frameworks!
pod 'AFNetworking', '~> 1.2.0'
pod 'MBProgressHUD', '~> 0.6'
pod 'MessageBanner', '~> 1.0'
pod 'Alamofire', '~> 4.5'
pod 'AlamofireImage', '~> 3.3'
pod 'Stripe'
pod 'Cards'
end
This is the original pod file of the application when everything with Afnetworking works.
platform :ios, '6.0'
pod 'AFNetworking', '~> 1.2.0'
pod 'MBProgressHUD', '~> 0.6'
platform :ios, '7.0'
pod 'MessageBanner', '~> 1.0'
Afnetworking is operating before the new gems are installed correctly. What is causing Afnetworking to fail at runtime after the pod file update ?
I can compile the target with debug configuration, but when change to release configuration, it failed with error:
ld: framework not found Pods_MyTarget
this is the pod file:
source 'https://github.com/CocoaPods/Specs.git'
platform :ios, '8.0'
use_frameworks!
pod 'Alamofire', '~> 3.0'
pod 'SnapKit', '~> 0.15.0'
pod 'ObjectMapper', '~> 0.19'
pod 'Nuke'
pod 'Nuke-Alamofire-Plugin'
pod 'RESideMenu', '~> 4.0.7'
pod 'XCGLogger', '~> 3.0'
pod 'MBProgressHUD', '~> 0.9.1'
pod 'TTTAttributedLabel'
pod 'UIColor_Hex_Swift', '~> 1.4'
pod 'RxSwift', '~> 2.0.0-beta'
pod 'RxCocoa', '~> 2.0.0-beta'
pod 'RxBlocking', '~> 2.0.0-beta'
I have seen this bug many a times. I do the below workaround, this may not be the right fix.
Go to Project settings and change "Build Active Architecture Only" to "NO".
I found that I have to change the pod file to something like this:
link_with 'xxx'
target xxx do
pod xxxxxx
end
and then delete some files generated by pod manually, seems pod cannot delete them, such as the xcconfig, framework, .etc
then run 'pod install'
it works.
I have been unable to get Cocoapods to build a deployable iOS app that requires different pods for the app and the watchkit extension. I have tried a format suggested in another thread: Include pods in main target and not in WatchKit extension
but it has numerous failures, including not finding headers. Here's the closest I can get:
source 'https://github.com/CocoaPods/Specs.git'
link_with 'RailTime-WatchKit-Extension'
pod 'Reachability'
pod 'IGInterfaceDataTable'
target :'RailTime', :exclusive=>true do
pod 'ASIHTTPRequest', '~> 1.8.2'
pod 'BPXLUUIDHandler', '~> 0.0.1'
pod 'MBProgressHUD', '~> 0.9'
pod 'Appirater', '~> 2.0.4'
end
This works fine for the simulator, but fails when trying to install on a device. The first error is:
ld: library not found for -lPods-RailTime-WatchKit-Extension
I'm using the latest Cocoapods right now .37. No errors are generated when performing a pod install.
Any help would be greatly appreciated!
Ken
Here's the general format that I use for my WatchKit app. See if this helps:
source 'https://github.com/CocoaPods/Specs.git'
target 'RailTime-WatchKit-Extension' do
link_with 'RailTime-WatchKit-Extension'
pod 'Reachability'
pod 'IGInterfaceDataTable'
end
target :'RailTime' do
link_with 'RailTime'
pod 'ASIHTTPRequest', '~> 1.8.2'
pod 'BPXLUUIDHandler', '~> 0.0.1'
pod 'MBProgressHUD', '~> 0.9'
pod 'Appirater', '~> 2.0.4'
end
OK, the solution was quite simple, even though I'm not sure why it worked. As suggested in another thread, I did a 'pod init', which now creates a template that is knowledgable about the multiple targets. I then just filled it in! Here's what I have now:
platform :ios, '8.2'
source 'https://github.com/CocoaPods/Specs.git'
target 'RailTime' do
pod 'Reachability'
pod 'ASIHTTPRequest', '~> 1.8.2'
pod 'BPXLUUIDHandler', '~> 0.0.1'
pod 'MBProgressHUD', '~> 0.9'
pod 'Appirater', '~> 2.0.4'
end
target 'RailTime-WatchKit-Extension' do
pod 'Reachability'
pod 'IGInterfaceDataTable'
end
target 'RailTime-WatchKit-App' do
end
I'm working on a legacy iOS project as a newbie. After I updated the CocoaPods and libraries, I've got these weird errors after building the project which never happen before.
error: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: can't locate file for: -lPods-Model
error: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: file: -lPods-Model is not an object file (not allowed in a library)
And here is my Podfile:
platform :ios, '7.0'
link_with ['DianaViewModels']
pod 'AVOSCloud', '~> 3.0'
pod 'PixateFreestyle'
target :Model do
link_with ['DianaModels']
pod 'ReactiveCocoa', '~> 2.2'
pod 'TMCache', '~> 1.2'
pod 'SSKeychain', '~> 1.2'
pod 'Mantle', '~> 1.3'
pod 'AFNetworking', '~> 1.0'
end
target :Test do
link_with ['DianaTests']
pod 'Kiwi', '~> 2.2'
end
target :View do
link_with ['Diana']
pod 'SVPullToRefresh', '~> 0.4'
pod 'MBProgressHUD', '~> 0.7'
pod 'SWTableViewCell', '~> 0.1'
pod 'MTMigration'
pod 'Masonry'
pod 'TTTAttributedLabel'
pod 'NJKWebViewProgress'
target :ViewDebug do
link_with [
'DianaDev',
'DianaViews'
]
pod 'Reveal-iOS-SDK'
end
end
By the way, I'm using the CocoaPods plugin in the Xcode. But a lot error are output when I check the Install Docs during integration:
Error opening xar archive: /var/folders/3x/mgl299js6k13tlrspqv21n340000gn/T/Model-ReactiveCocoa.xar
Are there some wrong configurations in my CocoaPods or Build Setting in Xcode6.3? Thanks for your help!
ADDED:
Here's my Link Binary With Libraries in the Build Phases. Does the red item mean something is wrong? It looks like this is the cause.