Good day folks,
Actually I'm going crazy, I did everything I could in order to solve this simple problem.
As you see, a simple label in a narrow space causes the single word "Verification" to be separated into two lines which is not acceptable of course.
I know that I could make number of lines only 1 and this will decrease font size, I tried all wraps modules and all fails.
What can I do to display the label as "Verification Process" without any separation of a single word? (I accept even shrinking font size or clipping last word).
The first one is default setting
Does these two settings below meet your needs?
If you are ok with clipping of the words, then you can set the lines property of your label to 1. Or you want to reduce the font size that also can be done using storyboard property inspector. Hope this will help.
please try this.
my testLabel and number of lines equal to 2.
self.testLabel.lineBreakMode = NSLineBreakByWordWrapping;
self.testLabel.text = #"verificaton process";
Related
For example, I have the following two string: "How Munched is That Birdie in the Window?" and "S22 - E7". I want to present in the label the following: "How Munched is That Birdie in ... S22 - E7" If the string is too large according to the label's size and doesn't fit it". How you can see, the three dots are placed always in the first string, the second string is always shown full.
How can I achieve this?
Here is how to do it.
yourlabel.adjustsFontSizeToFitWidth = false
yourlabel.lineBreakMode = .byTruncatingMiddle
You can set the UILabel's ParagraphStyle LineBreakMode to byTruncatingMiddle, which will probably work in most cases with carefully planned label size. From the docs:
The line is displayed so that the beginning and end fit in the container and the missing text in the middle is indicated by an ellipsis glyph. This mode is used for single-line layout
If you want to guarantee none of the "S22 - E7" string is truncated, you would have more control using two labels and setting layout constraints such that the width of the protected label is preserved so that it can display the full string whenever possible, but that is probably overkill in most cases.
You may also find this answer helpful if decide to go a different route by manually manipulating the displayed string based on detecting how many characters will be visible given the width and font.
A multiline auto typing text box class (which uses an SKNode as the parent) is created using basically 2 elements:
an SKSpriteNode that acts as text box frame & background image/texture holder.
an NSMutableArray containing a set limited amount (rows) of NSStrings that each have a set character length.
After modifying this text box class so that it can be initialized with any frame width & height, I realized I didn't program the NSMutableArray to automatically change its content in a such way that it nicely fits within the background node (with a bit of padding involved as well). So here I am wondering how to do that since NSString's can only return the character count and not the width & height of each string in points (points could have maybe helped me create character constraints in some way).
Right now, the NSMutableArray uses a hardcoded maximum character count per NSString & a maximum row count for the entire array (it's 5 rows right now and when that limit is reached, a new "page"/array is created). This forces me to manually re-adjust these parameters every time I change the background node frame size which defeats the purpose of the class allowing the background frame to change.
Thing is, I'm trying to solve this in such a way that when I post this class on github, I want the solution to take into consideration any fontName & fontSize.
What are my options for solving this problem?
I've done something similar to this. It doesn't work 100% as to what you want, but should be similar enough. It uses a root node and from there, it will build multi-line text using an array of NSString which will in turn be used to build the SKLabelNode.
I'll outline what I did. I should also say I only run this when new text is set. In other words, I do not incur the penalty of deriving the information every frame. Only once.
The generalized steps are:
You will iterate over each character in the text string. Note I do this because my code supports word wrapping as well as other alignment capabilities. So for me, I want that level of control. As this is being done only upon creation, I'm fine with the overhead. If you don't want to word wrap you could always just create an array of words and work from there.
As you iterate over each character, you'll be generating an array of lines. Where each line in the array is a line that will fit in your frame. For now let's not worry about vertical constraints. So here we are primarily worried about width. For the current line, each character you are iterating over will get added to the current line. For this potential line string, you will use NSString's sizeWithAttributes, which is configured for your font. For example in my code it is an NSDictionary which contains: NSFontAttributeName : [UIFont fontWithName:self.fontName size:self.size]. This will be used to check the width, if that width exceeds the frame width, you are overrunning the line.
So the code may look something like:
size = [line sizeWithAttributes:attributes];
if (size.width > maxTextWidth) {
needNewline = YES;
}
If you have overrun a line, you need to determine if you are word wrapping. If you are, you can just add the current line (minus one character) to the lines array. If not you have prune off the last word in the current line and then add that to the array of lines.
The tricky parts are dealing with whitespace and handling non-word wrapped overflow. I have not addressed whitespace but you need to consider this very much in your code. Additionally, you also do want to factor in leading pixels, etc.
Once you have your array of lines, you can then create your children SKLabelNodes. I add them to the root, which allows me to move the group anywhere it needs to be.
The real key here is the lines array generation.
I am using buttons to display product names in a matrix using TGridLayout.
The problem is that commonly Items contains 3 or 4 words and in my language (Portuguese) some words tend to be long.
I would like that somehow I could calculate the size of the font, decreasing it, in order to make all the text show up automatically (of course there is also a decrease limit, anything below 9 or 8 point for the font turn to be difficult to read).
The wordwrap property is turned on to have many lines, and use the most possible space for the text.
I don't know if you're programming for an Android/iOS app, but you can't change the fontsize of a button. I've had the same problem, my solution was to make an abbreviation of the words. And then i put labels above it to explain the abbreviations.
Of course you can adjust the font size of a button:
TButton.TextSettings.Font.Size
I want to use the very same label in all my CCMenuItems. If I create the same CCLabelTTF once, then I can't add it to more than one CCMenuItem because it will give runtime error about label already added. But creating the same label many times also not effective, if the label is same. How to optimally solve this problem?
you cannot use the same label more than once, the label is not only what you see, for example it also contain a position, so you cannot place the same item in 2 different points.
What's the problem on creating more than one? if you have a LOT of ttf labels that change text often you can consider using bitmap fonts. they are rendered faster
I have seen here people needing to calculate the size of the NSString given a size but I need to do the opposite.
Given a specified rect (or fixed UITextView, or multiline UILabel, no scrolling) I need to know:
if it managed to show all the chars of my NSString
if not, what is the last char shown
So that I can display the remaining text in another UITextView (of course if I could use a single UITextView I would not have this problem).
At first it seems a simple thing to do, but actually I am not finding a way, intuitively I think I could use either UITextView's:
textView.contentSize.height;
or NSString's:
sizeWithFont:constrainedToSize:lineBreakMode:
or a combination of the two, but I need to be precise and those methods do not help me in telling what is the last character that managed to fit the visible area of the UITextView.
Not sure if this is actually possible, but is a requirement of my client who thinks programming iOS is like printing a newspaper and expects to be able to format text around an image....
You could maybe get the maximum height of one line of text from a one character long string.
If you use that with sizeWithFont:constrainedToSize:lineBreakMode: then you should be able to know if your text runs onto more than one line (if the cgsize height is greater than the height of one line of text).
In order to find out the last character (or word) you would have to loop around the length of the string adding characters (or words) as you go and checking for when the cgsize height increases to add a new line, this will give you the character point when to split into multiple strings ( for multiple fields/labels/textviews ) or when to insert line breaks into the text ( if using a single multi-line textview or label ).
I hope you find an easier way...