I have an app build with Meteor like this meteor build <path> --server <address:port>. What is the next step to add it to my iPhone for testing?
When I open the myApp.xproject file it saying in Identity section no matching provisioning profiles found I did try 'Fix issue' btn, which guided me to make an account etc. But this did not fix it. Is it possible because I haven't paid yet for for my account? I just would like to see how it would work on my iPhone for now.
Yes, you need a developer account to run on an actual device. Pay for the account and you will get development profiles and distribution profiles so you can run on your phone and submit to The App Store. Good luck!
There's a weird way that used to work. It's like a debugging mode but the most recommended way is to do it getting the developer account as Douglas said.
These are the steps:
Go to Xcode > Preferences and where says Accounts add your apple id. It will ask you for a team name, type your name for example.
Now go back to Xcode and click on the blue file at the top of the navigator with your project name. Then General.
The system will ask you about fixing an issue, do it and after a while it will finish.
Then choose a version available on your device and your iPhone in the device selection.
It worked with some of my classmates, I can't verify it 100% because I have the developer account. Hope it helps.
Related
I want to run my cordova iOS Application on my iOS Device for testing.
Following are my build settings:
Clicking Enable Development Signing sets the Team to None.
My build is successful. On installing, XCode shows the following error:
Does it require a developer account to run the Cordova iOS build on a device for testing? The Cordova Android version is already on Play Store.
How to set a Signing Certificate without a developer account? How to fix the invalid signature error. I haven't set any signature yet.
I am completely new to iOS.
Yes, you must have a developer account to get a signing certificate. The signing certificate pairs with your provisioning profile, which also requires a developer account to create. You need both to run on a physical device. Your device must also be registered with your account and included in your provisioning profile device list to be allowed to run the app, outside of the App Store environment.
Xcode handles much of this for you automatically, if you have a developer account set up under Xcode Preferences > Accounts > Apple IDs. On the right-hand side of that screen you have a list of "Teams" along with buttons that say "Download Manual Profiles" and "Manage Certificates..." Is anything listed in there?
Your screenshot shows a Team with your name, which should mean that you have a developer account already?
You also have a button in your screenshot that says "Enable Development Signing." Have you tried running that? Does it not take care of things automatically for you? "Automatically manage signing" enabled should be helping you get through these issues with simple clicks of those buttons.
Otherwise, you will need to go to the Developer portal and register a signing certificate manually. That's a process that many have written blogs and manuals about already. I don't think it is necessary to re-write what has been said by many others already. Here's a YouTube video that does a nice job of explaining things: https://youtu.be/OwXIJchrDdA
I am trying to publish an app for testing, without having to connect a device in my mac.
I have created a developer account, created an app in itunes, generated bundle id, signed into xcode with the developer account, generated a distributor certificate.
When I tried to archive the app, I got the error "conflict provisioning setting. app is automatically signed for development ..."
I read in this post and followed the tip of unchecking and rechecking the option "Automatically manage signing". After re-choosing my team, I get the error "There are no devices registered in your account on the developer website. Plug in and select a device to have Xcode register it".
The goal all along was that I wouldn't need an ios device, because I intended to immediately publish the application and invite people to test it via testflight. Is it not possible to do it like this? Am I missing something.
I have read lots of documentation, but being a first timer in this, everything seems confusing.
Edit: I created a provisioning profile as distributor. Even after creating and installing the distributor profile (it now appears also in xcode at Account -> provisioning profiles), I still get that same error. I also noticed that in signing, The signing certificate is iOS Developer. I am sure
I fixed it by plugging in my iPhone and going to the Product menu > Destination > iPhone (my device).
Then after clicking Try Again on this properties page the warnings went away.
Source
The solution (though I would welcome more elaborate, insightful explanations):
#General -> Signing, disable the option "Automatically manage signing"
#General -> Signing and certificates choose your team
Though in my case that was not the issue, I would recommend making sure that in the device list, you choose Generic iOS device in your target devices.
This really sucked to figure out.
What you do is add a distribution profile in https://developer.apple.com/account/resources/profiles/add. Don't choose development! Don't let the Xcode Automatically manage signing!!
Then, you download the provision.
Then, in the Signing & Capabilities -> Signing Section of the project.xcodeproj file, turn off Automatcially manage signing, choose import and import the file you just downloaded.
Then, in the top, you choose Any iOS Device (arm64, armv7) and then you go Product -> Archive.
What happened to me was that I was about to run my app on a physical device for the first time and I didn't have a Team. So I created it in the process before connecting my phone with the USB cable. After I created the team a message like the listed above appeared. I did some research on internet but nothing found.
So here's what I did: I connected my phone, did all the trusted process, then restarted Xcode, and it worked. I am not sure what happened, but it was some of my first experiences using Xcode. It could sounds silly but it helped me. Hope to you too.
If you do not wish to register a device follow this advice:
https://stackoverflow.com/a/44157307/499581
* In short use "Generic" as the device while archiving.
If you do wish to register a device then the solution to:
"There are no devices registered in your account on the developer
website. Plug in and select a device to have Xcode register it".
Is to physically plug-in your device (an actual iPhone, or iPad) so that Xcode can register it for development use (note: this will not affect the normal everyday use of the device). After the device is registered it can then be used for development testing, load provisioning profiles onto it, etc.
↳ Disabling and Enabling Devices Using Your Developer Account
For those who are trying to develop without a mac computer using MacInCloud don't follow the standard advice out there. Its will lead you down a hole. I have wasted hours of my time.
The reason it say something about "a device to be registered to create provisioning profile" is that you need to provision an iOS device that you can test on before you can get it signed. If you are using MacInCloud you probably can't physically connect an iPhone or iPad to the MacInCloud and therefore it can't automatically provision devices for you.
Before you get to far into this you will need to get your iPhone/iPad UDID. Which I was able to do with https://get.udid.io/ on my iPhone, but it didn't work on my iPad. Instead, with the iPad I had to download iTunes from the Windows store and connect my iPad. Then click on the little gray square in the menu that's inline with Library tab.
image of itunes
Then when it pops up with your device info (mine didn't come up with my info at first, I had to sync my device). You will see your SN. Click on your SN and it will change to your UDID. Once you have your UDID you are ready to create a provisioning profile. What is confusing is this isn't done in the appstoreconnect section of your account online. Its done in your developer account: https://developer.apple.com/account
developer.apple.com account screen shot
When you go there you will want to click: Certificates, Ids & Profiles
Here you will need to add your devices and then with auto signing checked in Xcode that made the problem go away. NOTE: I originally tried to create a profile, download it, and import into Xcode under the Provisioning Profile dropdown in Signing & Capabilities. As described in another answer here, but that proved more problematic and wasn't necessary.
Then you can chose Any iOS Device from emulator device drop down then go to Product > Archive > Distribute App and create a certificate to place it on the app store (TestFlight).
you can also plug an iphone, run the app the app on your iphone as the target, it will ask you to register the device and then the certificates will be generated
Have you paid the $99/year developer fee? TestFlight is only available for paid developers. I would highly recommend plugging in an iOS device, though. It's more fun and rewarding testing that way.
I new to iOS development, and I want to run my app on my iPhone. I have connected it to my laptop but no prompts show up. I read all these tutorials on how to add a device and stuff but it really is confusing for me, because none of it is happening for me.
I am probably going to be down voted cause this is a stupid question, but my brain is rattled: How do I create a provisional file, and use a device for development? Please make it really detailed, cause Apple's description are kind of vague.
(The thing is when I press the plus button in iOS Provisional Profile in Member Center, it can't detect a device that has been connected. If that way is wrong, you know why I am confuse.)
There are lot of steps to do to run iOS app into your Apple Device.
1) register to apple developer portal
2) enroll for iOS Developer Program, which will cost $99 per year
3) add your device to your account, create certificate & Identifiers. with all these create Provisioning Profile.
4) download the PP and install it to you device
5) Open you Xcode, -> Application -> Build Settings -> Code Signing: select you "Provisioning Profiles"
build and run.
see the link it will help you
http://www.wikihow.com/Create-a-Provisioning-Profile-for-
if you want best
https://developer.apple.com/library/ios/documentation/IDEs/Conceptual/AppStoreDistributionTutorial/CreatingYourTeamProvisioningProfile/CreatingYourTeamProvisioningProfile.html
I am a new iOS developer, and although I have been successful in provisioning a device for development in Xcode in the past, I just obtained a new device and am having an awful time getting Xcode to provision it and allow me to test applications on it.
When I connect the new device to Xcode, Xcode does recognize and identify the device correctly, however when I run the application I get the following error message: "A valid provisioning profile for this executable was not found."
According to the Apple documentation, I am supposed to first request a development certificate in Xcode using the following steps:
Choose Window > Organizer > Devices
Select Provisioning Profiles.
Click the Refresh button at the bottom of the window.
Enter your user name and password and click Log in.
After you sign in to your account, a prompt appears, asking whether Xcode should request your development certificate.
I have followed steps 1 - 4 repeatedly and each and every time Xcode crashes before I can get to step 5. I have tried completely closing xcode, detaching device, cleaning project, restarting computer, etc. Is there another way to request a development certificate outside of Xcode?
Ok so then the docs say I should provision the device (granted I assume this step is contingent upon the success of the previous step which I cannot achieve, but I tried it anyway) using the following steps:
Connect your device to your Mac.
Open the Devices organizer
select your iOS device.
Click the “Use for Development” button. The first time you add a device ID to your account, Xcode creates the iOS Team Provisioning Profile using the iOS Wildcard App ID, your development certificate, and the device ID. The iOS Team Provisioning Profile is also installed on your iOS device. If the device was used for development in the past, the “Use for Development” button may not appear. If this happens, click “Add to Portal” at the bottom of the screen instead.
So the "use for development" button does not appear (it appeared the first time I attempted this and hasn't since), so I clicked the "add to portal button". Every single time I do this, Xcode crashes.
I currently have the code signing identity set to iPhone Developer (my name). I have also tried setting it just to iPhone Developer and even Do Not Code Sign. I also went to the iOS dev center and added the device there (not sure if I needed to do that or not).
In any case, can anyone suggest anything I might be missing or any other approach?
While I was sleeping, Apple completely abolished the Portal and created a new and apparently largely broken interface. It's like a kind of evil April Fools joke. Anyway, if you go to https://developer.apple.com/account/ios/device/deviceList.action there's a great big sign telling you that you must "reset your device list before adding any new devices". That sounds like it covers exactly your case. Good luck.
I also went to the iOS dev center and added the device there (not sure if I needed to do that or not).
You need to add the device there.
Steps You need to follow after adding device:
Next re-download the mobile provisioning profile again.
Go to organizer and delete the old mobile provisioning profile you had.
Double click the new mobile provisioning profile you just downloaded and see that it appears on the organizer.
Connect your device and you should see your device's name instead of iOS device.
hope this helps.
If you are looking to bypass the 'Register a Device' portion of the Provisional Profile registration simply upload the 'sample .txt file' they provide you and upload it. You will then be allowed to click 'Next' to finish the registration so this way you do not have to enter a device UID.
I know that it has been asked a thousands of times, but I am struggling 4 hours with every possible sollution I read but still I cannot beta test my app in my device.
Here are the facts:
1) My app is uploaded in the IOS store, so I have created a provisioning profile, app id's and so on. I just now want to test it in my iPhone4, with target iOS 6.0.
2) I added my device UDID in the devices, in my developer account.
3)I set the code signing for debug to my provisioning profile.
4) I plugged in my ios device in the mac and I see that picture.
As you can see there is no provisioning profile.
5)If I run the app to my ios device (which is listed in the Xcode) I get the error
No provisioned iOS devices are available with a compatible iOS version.
I tried so many solutions that I found that I cannot even remember all of them. I am following all the steps one by one.
-someone said to log out from developer account
-other said to change deployment target
-other said to change the "edit scheme" to debug.
Can anyone help me? I do not understand what is missing since app is published and I only want to test it in my device. Should I change anything else?
EDIT: I selected the device as Ganee said. Then in my organiser I see the following picture:
If I press refresh, I see "Too few items in team".
So If I remove the provisioning profile, how do I download the new one? I suppose I enter my developer account and press download in the distribution profile under the provisioning tag, right? But is this updated with the selected device?
Here is my picture from the developer account:
I think you followed all steps, but still you have to conform the following steps.
After you added device to developer account, you have to select that device in your provisioning profile.
Remove old profile from your organiser, download new modified profile and install it on your Mac.
Please check wether you modified developer/ distribution profile and select it on your xcode.
Hope this will give some clarity.
I remember having similar problem in the past. I am not sure if yours is similar. But awhile back when I upgraded my iOS device, it was no longer compatible with the xcode version I was running. I had to upgrade to the latest version of xcode. What is Xcode version are you running?
Finally the problem was that I had a distribution profile set up, and not a developer. Thanks for the help!