I am trying to upload version 2.0 of my iOS app, but it will not allow me to use the same bundler identifier.
1) When I create the new app record in iTunesConnect how can I change it match my new bundle identifier, if my app has the old bundle identifier?
Select your projects Build Settings tab in Xcode. Scroll down. Select code signing identity and make sure Release is set to iPhone Distribution: Team Name and not iOS Developer.
To answer your question, create a new app id in Apple Developer portal that matches your new bundle ID. You can't do this in iTunes Connect. Do that first, then create the app record in iTunes Connect (the app id you created should be available to use).
I have created an app in App Store Connect and it has been in the "prepare for submission" state for more than 3 days. When I try to archive my app, and submit it to the app store it, displays this message:
No suitable application records were found. Verify your bundle identifier is correct.
Just found the Error. I used one capital letter in bundle id. but I have used small letters in Xcode's bundle id. now I changed that as like in the app id. and now I successfully uploaded my app to Appstore Connect.
generally this happens when you have not created your app from apple developer account->iTunes Connect->Click on My App->click on plus sign (+)->New App->And fill up the whole info and Choose Your Bundle Id for the app you are uploading now.
Just check that app you configured on iTuneconnect is having same bundle identifier that you are using to upload app.
URL: https://appstoreconnect.apple.com/apps
iTunes Connect || App Store Connect (website):
In your browser, go to iTunes connect/ App Store Connect.
Add your New App / edit your existing app.
Go to App information.
Check the Bundle ID name.
If there is no bundle ID, make sure you create one.
I used the WildCard bundle ID. That means, your complete bundle ID is likely to be com.organizationName.* and the suffix (exampleApp).
Xcode:
Go to your Workspace / Project.
Go to your project.
Select the General Tab.
Ensure the Bundle Identifier is the name you set in iTunes Connect.
For example: com.orgnanizationName.appName
It seems you have to start the App Store submission process in iTunesConnect.
What did the fix for me is to allow app access to all users:
Go to AppStore Connect
Go to My App
Under Additional Information, click on 'Edit User Access'
Select 'Full Access'
This allowed me to upload the app the first time (via Xcode & Application Loader)
After the initial upload, i can switch back to 'Limited Access' and upload just fine.
I believe you can found the answer here Xcode 5 - "No application records were found" when trying to Validate an Archive from #Bamsworld.
As you already mentioned and as per the documentation - App Distribution Guide
Important: You can’t validate your app unless the app record in iTunes Connect is in the “Waiting for Upload” or later state
After you add a new app in iTunes connect there will be an amber light along with its status. It will most likely read "Prepare For Upload". To get it to the "Waiting For Upload" state click view details for the app and in the top right there should be a blue button that says "Ready to Upload Binary". Click this and follow the given directions.
If you use Application Loader, then check if you are logged to the correct account. It was my case and it can happen if you manage account for various clients.
In my case, I had 2 Apple IDs in my Xcode preferences (Xcode -> Preferences -> Accounts), so I had to remove one. After I removed Apple ID that I didn't need, validation process worked just fine.
Wasted a few hours, just because the error message is useless. This is so frustrating.
Double check the Bundle OS Type code in your App's info.plist, for me, the only way around this error was to set it to APPL.
The weird thing is that the error was regarding to my frameworks bundle id, tho changing the above in my app solved it.
Using Application Loader worked in my case.
Chek your app ID in the Apple Developer Center. Then, use exactly the same name in Bundler Identifier.
I have to manually sign the app. Created new certificate and new profile. Set code signing to Manual. Only then i was able to upload. Moreover select Manual sign in from organizer while uploading build.
Once check this.
Open your .plist file and check for "Bundle OS Type code" key. If that is not there, add a row and give that key and check the type it should be a string. And give "APPL" as value.
Clean the project and go for Archive.
I hope it will work for you.
I've changed the Version number but forgot to change the Build version. Changing the Build version resolved the issue. Such a silly mistake. Smh...
Make sure this is included in your Info.plist:
<key>CFBundlePackageType</key>
<string>APPL</string>
I had APPL misspelled as AAPL. Once I fixed that and signed into Application Loader and Xcode with the same Apple ID, everything worked.
Since this is question obviously has different potential answers depending on the individual circumstances I thought I'd add my problem and what solved it:
Problem: I had someone copy the binary archive, make some changes and then pass the binary onto me. This caused a binary conflict.
Solution: I had to create a new certificate. I copied the bundle ID from the develop consul, pasted into xcode and was able to upload.
Side note: You can regenerate a new bundle id by turning on "In-App Purchases" under Capabilities.
After few days I realize that, I've set Bundle ID wrong.
Here is how I correct,
Go App Store Connect > Your App > App Information > General Information
Select the Bundle ID you create and assign at xcode before.
Now you can Upload without error.
Firstly, check that you're using the same accounts in both Application Loaded (or XCode) and iTunes connect. Secondly, check that Bundle Id in error message and in iTunes connect are match, including tHe cAsE!
Make sure you follow these steps in order:
Generate the App ID at https://developer.apple.com/account/ios/identifier/bundle
Generate your app from iTunes Connect selecting the Bundle ID created in step one
Upload the IPA from Application Loader or XCode
if your bundle id carried a capital letter and you've changed it to a lower case letter, you must run the application in the simulator before attempting to archive and upload to app store connect (this was the issue and solution for me).
For me, what fixed it was to enter the required details in App Store Connect -> TestFlight -> Test Information.
Once I'd done that it seemed that Xcode realised there was a new app to allow uploading to and succeeded.
(Also check your caps in your Bundle ID though. 😉)
iMessage Extension: For everyone that is fighting with this problem with an messages extension (or any other extension) make sure you enter in "App Store Connect" -> "General Information" -> the Bundle-ID of the application target and not the extension target. We fought 2 days to find this out.
For me : Just tried uploading using Application Loader and it worked
If after you confirm your Bundle ID's match across App Store Connect, Apple Developer Portal, and Xcode and you are still having issues try this:
Remove the Apple ID associated with the Bundle ID you're experiencing issues with from your Accounts list in Xcode (Menu Bar -> Xcode -> Preferences -> Accounts). Then, add the Apple ID back to the Accounts list in Xcode.
For me, it was because I forgot to create a "Provisioning Profile" on Apple developer portal. I created a profile here for "App Store", then downloaded and opened the file and it worked!
In my case I got it worked with opening the Application Loader inside the XCode.
Steps : XCode -> Open Developer tool -> Application Loader
When I opened it with Launchpad it failed to identify the correct account for the app. Therefore, it asked me to create an account.
With XCode , Application Loader could list down the accounts I'm entitled for. You have to select the correct account from the drop down.
In my case the app was already set up, but the app version was already in use (waiting for review), I just needed to increase the version number.
In my case the problem was that my application had literally no information filled in the App Store Connect
In my case I was using a different account, I created an app on Itunes but selected different account on Xcode. So just Selected the right account on Xcode and it worked for me.
In my case
Checked if same user in itunes and xcode
Checked bundle ID is same
Solution:
Go to itunes inside the page of my app and inside the first tab "App Information" under the right hand side has a section "Others Information" click on the "edit user permission" and grant xcode user the permission to read the information of the app.
DONE
I set up my application in iTunes Connect. It has not been submitted yet (Ever). Later, I saw that my bundle identifier was not matching with the one in my Xcode project and iTunes Connect. I cannot change the bundle identifier in Xcode because it is faded out.
So I tried changing it in iTunes Connect by making a brand new app id with the correct bundle identifier. I go into my application within iTunes Connect and selecting a brand new bundle identifier from the drop down list but I do not see the one I just recently made.
Does anyone know what I am doing wrong or how I can change the bundle identifier within iTunes Connect?
Thanks!
The same thing happened to me, but I was able to see the new bundle id after logging out of iTunes connect and refreshing the page. I believe this is a problem with the new developer portal... It took 5 minutes once then refreshed and it appeared in the dropdown list.
Hope this helps, good luck!
UPDATE: Make sure you press the SUBMIT button after creating the new Bundle ID in the developer portal then press DONE... the log back into iTunes connect and it should be there.
It is probably less effort to change the bundle ID in your Xcode project instead of registering a new one with iTunes Connect.
You may change the bundle identifier by editing the Info.plist file.
I have an app in my ituneconnect account. I changed its bundle ID. It still shows the older ID in app details. but when I validate my binary it says that you Bundle ID doent match as its been updated to new one.
I want to revert to old one again but it doesnt give me a option to select the older bundle ID. As in Edit option it shows the older one selected and the actual current one doesnt appears.
Let me make it more clear. I have 3 bundle Ids option - 1,2,3
The time I created application I added Bundle ID-2
Then I changed it to 3 by mistake
Still in app details it shows 2 as current bundle ID, Now there are just two options - 1,2
When I try to upload my binary it says that you have bundle ID 3 selected on iTunesConnect
Does anyone having similar issue
You cannot change the bundle ID of an app in iTunes connect. (It appears to be an absolutely unmodifiable field in Apple's database.) So you must have two different apps, and might be using (attempting to update) the wrong one.
Based on your question, I am assuming you are trying to change the bundle id not in xcode, but on iTunesConnect.apple.com and that your app was built with the new bundle id that you dont want to use.
If that is the case, here's what you should do:
Go to XCode, select the target, and select the Summary tab.
Change the bundle id
build and use application loader to submit the same (after verifying
the app) making sure that you have setup the app (you want to update) with the old bundle id for update.
Hope this helps!