On rake db:migrate, I am getting following error.
ruby-2.2.1/gems/activesupport-4.0.2/lib/active_support/values/time_zone.rb:282: warning: circular argument reference - now
rake aborted!
PG::ConnectionBad: could not connect to server: No such file or directory
Is the server running locally and accepting
My rails gem gem 'rails', '4.0.2'
What's the solution for this?
From your error, it sounds like you are trying to use a Postgres database with your rails project. Basically, postgres runs separately from your rails project. You need to make sure you have:
a) installed postgres using something like homebrew
b) found a convenient way to start your postgres server when you need to (I recommend the one on postgresapp.com)
c) actually started the server before running the command that's producing this error (e.g., through opening the postgresapp or in a separate terminal window)
Conceptually, think of it this way: you can't migrate (e.g. 'change') a database that's inaccessible because the postgres server is down. That's what the error means.
As an alternative, you can use SQLite instead of Postgres. SQLite does NOT run as a separate process (https://www.sqlite.org/serverless.html), so you will run into these problems less. However, in your ruby code, you will need to pay attention to exactly how to configure your app for a postgres database or a sqlite database, whichever you choose. Here is a great SQLite tutorial for initial set-up:
http://www.integralist.co.uk/posts/active-record.html
Related
I'm learning Ruby on Rails, and having lots of difficulty setting up.
So I have created this new app, using 'rails new' command.
Modified a bit, and now on way to deploy it on heroku.
First try, it failed because heroku required the app to use postgresql rather than sqlite3, which was set as a default database.
So I downloaded and installed postgresql, and here is the where the trouble began.
After installing the postgres, I set up the path.
And then I was unable to run the app locally anymore.
In command, "rails server" command is not working anymore, showing all kinds of error not being able to load stuff.
It looks like this:
D:\ruby\appname>rails server
c:\RailsInstaller/Ruby2.1.0/lib/ruby/gems/2.1.0/gems/pg-0.17.1-x86-mingw32/lib/pg.rb:10:in 'require': cannot load such file --2.1/pg_ext <LoadError>
and another bunch of load error.
No need to mention deploying on heroku, it fails everytime.
After installing postgresql, I can't use any database related commands as it says "loaderror" everywhere.
I can't run the app locally, nor deploy on heroku.
How should I fix this database problem?
In development you can still use SQLite, and in production use Postgres.
It's not advisable forever to have that disparity, but it does mean you an make progress.
Remove any production settings in database.yml, but still include 'pg' in your Gemfile.
Heroku will automatically insert database settings for Postgres in production. Deploy and then run heroku run rake db:migrate to set up your database.
I'm trying to create a new record through the rails console but I'm getting the following error:
PG::ConnectionBad: FATAL: database "my_database_development" does not exist
I've recently changed from Sqlite3 to PG to be able to deploy to Heroku. Is this what is giving the error?
Thanks a lot!
It looks like you have not yet run
rake db:create
This will "create" the databases on your PostgreSQL server. A step that you didn't have to do with SQLite, but Postgres requires it. As TK-421 said, make sure that your database.yml is configured for your OS and Postgres, not SQLite.
Here is a (possibly outdated) Railscast on the topic.
http://railscasts.com/episodes/342-migrating-to-postgresql
Is this running locally, or on Heroku? In config/database.yml, the local user you specify will need to have CREATEDB privileges (as a superuser, for example).
There's a little more configuration required in this case than for SQLite. Google will show you a bunch of tutorials specific to your OS.
If you see this problem in production on heroku, start the console like this:
rails console production
If you have that problem in development on your machine, check your config/database.yml. It is points to a local development database that does not exist.
I'm currently evaluating Nitrous.io and liking what I'm seeing so far. I've currently got a few databases for testing and development running on Heroku's hosted Postgresql service as well. I'm running into some issues when running tests though, and I'm hoping somewhere here may have a solution.
When I run rake db:test:prepare I'm getting the error:
FATAL: permission denied for database "postgres"
DETAIL: User does not have CONNECT privilege.
From what I've read elsewhere, that's trying to DROP the database, but Heroku's hosted databases don't allow that. Does anyone out there know how to run Rails tests on Heroku's Postgresql?
Nitrous.IO has released a package manager which will allow you to install Postgres within your Nitrous box. This can be used for your test database as well as your development database if needed:
https://github.com/action-io/autoparts
This also requires that you are using a Nitrous box is running version "bran" or later (see README). You may need to terminate/create a new box if you are running on version "arya".
To use autoparts, run parts search to see all of the packages available.
To install postgresql within the Nitrous box, run the following command:
parts install postgresql
Make sure that your config/database.yml file explicitly sets host: localhost for each database you wish to connect to, or else the pg adapter will fail to find the socket it needs to connect to.
According to the Heroku docs, you need to use "heroku pg:reset" in your rake task.
https://devcenter.heroku.com/articles/rake
I have a rails app that requires multi-table inheritance for which I am using the CITIER gem which itself requires the rails_sql_views gem to produce database views representing objects.
So far, so good. All this works like a charm on my local machine using sqlite3. When I try to deploy the application to Heroku, however, I am neither able to perform a database migration nor able to access the rails console.
The reason seems to be that the rails_sql_views gem tries to access some methods of PostgreSQLAdapter which are claimed to be non-existent. However, when I check the files of the rails repository, I can find these methods in the code. What is going on here?
When I try to run "heroku run rake db:migrate", I'll end up with the following error trace:
Running rake db:migrate --trace attached to terminal... up, run.1 rake aborted!
undefined method `tables' for class `ActiveRecord::ConnectionAdapters::PostgreSQLAdapter'
/app/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.3/lib/active_support/core_ext/module/aliasing.rb:31:in `alias_method'
/app/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.3/lib/active_support/core_ext/module/aliasing.rb:31:in `alias_method_chain'
/app/vendor/bundle/ruby/1.9.1/gems/rails_sql_views-0.8.0/lib/rails_sql_views/connection_adapters/postgresql_adapter.rb:5:in `included'
/app/vendor/bundle/ruby/1.9.1/gems/rails_sql_views-0.8.0/lib/rails_sql_views/loader.rb:12:in `include'
[....]
This looks like an incompatibility between sqlite3 and postgres adapters with that gem. You should try to keep development as close to production as possible. Try installing postgress locally https://devcenter.heroku.com/articles/local-postgresql and see if you get the same error locally. If you do, consider writing a detailed bug report and sending it to the author of the Gem, or attempt to fix it yourself and send a pull request.
I have InstantRails installed along with WeBrick and sqlite3.
What exactly do I type in the Windows cmd console to setup a db called 'development' and to get the entire things running?
This is my #&%^# 4th day of installation. I can get everything running on my localhost EXCEPT setup my db. I'm not a programmer so if you have a good url for beginner tutorials that would be great.
Please tell me exactly what I need to type in the cmd console (or what console I need) to make my db hold the information.
I was typing $ sqlite3 db/development.sqlite3 to (boot up?) the db.
Then I typed: CREATE TABLES (code)
Note - I already tried rake db:migrate
Try rake db:migrate (assumimg you have at least 1 migration created ) . The db should be created automatically.