Related
Before upgrading Xcode to 7.2, I was using Xcode 7.1.1 to build and distribute apps. I have upgraded to Xcode 7.2 and none of my provisioning profiles (matched to that particular app's bundle ID) match my installed certificates that were working in Xcode 7.1.1.
I only get:
Your build settings specify a provisioning profile with the UUID “some_number”, however, no such provisioning profile was found.
I have tried regenerating a .certSigningRequest to generate a new Certificate and Profile and made sure the Team in the General tab of the target is correct. Whenever I select a Provision Profile, all of my Code Signing Identities appear in the Identities in Keychain, but none of them will pair correctly.
It seems setting the Provision Profile to Automatic and the Code Signing Identity to iOS Developer will resolve this error, but the advantage of managing my Provisioning Profiles is gone as I believe Xcode then manages these.
Any thoughts on why setting my Provisioning Profiles and Code Signing Identities to anything but Automatic and iOS Developer produces this error?
I also had some problems after updating Xcode.
I fixed it by opening Xcode Preferences (⌘+,), going to Accounts → View Details. Then select all provisioning profiles and delete them with backspace (note: they can't be removed in Xcode 7.2). Restart Xcode, else the list doesn't seem to update properly.
Now click the Download all button, and you should have all provisioning profiles that you defined in the Member center back in Xcode. Don't worry about the Xcode-generated ones (Prefixed with XC:), Xcode will regenerate them if necessary. Restart Xcode again.
Now go to the Code Signing section in your Build Settings and select the correct profile and cert.
Why this happens at all? No idea... I gave up on understanding Apple's policies regarding app signing.
Try restarting XCode first, before trying these other answers. I was about to follow the advice given in other answers, then noticed multiple people saying that restarting XCode was necessary after all the steps. All I did was restart XCode and it fixed the problem. Who knows if it'll fix the problem for you, but it's worth a shot before trying the other solutions. I'm on XCode 7.2.1.
Keep quitting Xcode until the damn thing works.
I've also the same problem, in Xcode 7.2
It solved by followings steps:-
1) Open Xcode preference,
2) Select the appropriate team,
3) Click the "View Details..".
4) In section "Signing Identities": click on "Reset" for each of them.
5) In section "Provisioning Profiles". Click on "Download All".
6) Click on "Done."
7) Go in Xcode, build settings, select it. In General tab, the issues should get removed.
8) Restart the Xcode.
9) Do the Final build.
That's all.
Download https://developer.apple.com/certificationauthority/AppleWWDRCA.cer and add it to Keychain access > certificates (which expires on 2023)
Also after I did all of suggested steps (btw, for some reasons backspace not remove provision profile) error keeping occurring. Until I finally figured out to Restart Xcode.
Probably, it should be first step when you're dealing with Xcode :)
Using Xcode 7.3, I spent way too much time trying to figure this out -- none of the answers here or elsewhere did the trick -- and ultimately stumbled into a ridiculously easy solution.
In the Xcode preferences team settings, delete all provisioning profiles as mentioned in several other answers. I do this with right click, "Show in Finder," Command+A, delete -- it seems these details have changed over different Xcode versions.
Do not re-download any profiles. Instead, exit your preferences and rebuild your project (I built it for my connected iPhone). A little while into the build sequence there will be an alert informing you no provisioning profiles were found, and it will ask if you want this to be fixed automatically. Choose to fix it automatically.
After Xcode does some stuff, you will magically have a new provisioning profile providing what your app needs. I have since uploaded my app for TestFlight and it works great.
Hope this helps someone.
Check your Keychain - look in Login and System keychains for expired certificates or error messages.
I found certs with "this certificate has an invalid user" error messages, and an expired Apple Worldwide Developer Relations Certificate.
Delete them and install the new AWDRC certificate from https://developer.apple.com/certificationauthority/AppleWWDRCA.cer
Then follow the accepted answer to get Xcode to use the new certificates.
For me I tried following 2 steps which sadly did not work :
deleting all provisional profile from Xcode Preferences Accounts → View Details , downloading freshly all provisional profiles.
Restarting Xcode everytime.
Instead, I tried to solve keychain certificate related another issue given here
This certificate has an invalid issuer Apple Push Services
This certificate has an invalid issuer
In keychain access, go to View -> Show Expired Certificates.
Look for expired certificates in Login and System keychains and an "Apple Worldwide Developer Relations Certification Authority".
Delete all expired certificates.
After deleting expired certificates, visit the following URL and download the new AppleWWDRCA certificate, https://developer.apple.com/certificationauthority/AppleWWDRCA.cer
Double click on the newly downloaded certificate, and install it in your keychain. Can see certificate valid message.
Now go to xcode app. target → Build Setting → Provisioning Profile . Select value from 'automatic' to appropriate Provisioning profile . Bingo!!! profile mismatch issue is solved.
In my case, the problem was that the Archive was being built with a different TEAM-ID than the one who generated the Provisioning Profile (Me). Therefore I Got the error:
"No matching provisioning profile found: Your build settings specify a provisioning profile with the UUID, however, no such provisioning profile was found."
To Solve this:
Clean and Re-Download your Provisioning profiles from Settings
Re-Start Xcode
in the GENERAL Tab of the Project properties, got to TEAM:
Change the current team to the Same team but the one under the ACCOUNT you generated the provisioning profile with.
Clean & Build
Viola!
Hope this helps someone.
I updated to Xcode v7.3.1 and it solved the issue.
With Xcode 7.2.1, if you are certain that your provisioning profile is correct (it has the correct App ID and certificate, and the corresponding certificate exists in your Keychain Access) then set the Code Signing Identity and set the Provisioning Profile to Automatic.
What I did was: created a new provisioning profile and used it. When setup the provisioning profile in the build setting tab, there were the wrong provisioning profile numbers (like "983ff..." as the error message mentioned, that's it!). Corrected to the new provisioning profile, then Xcode 7.2 refreshed itself, and build successfully.
Solutions described here work, but I want to add that you need to have correct target selected on the top left corner of Build Settings in Xcode. Lost some time figuring this out...
You can easily fix the problem by changing bundle identifier on the Apple web page from com.my.app to com.my.app.iOS. I found this solution at https://forums.developer.apple.com/thread/15712.
In Xcode 7.3 I got the same error, my certificate and provisional profile both were fine still I was getting the same error, I was unable to delete the provisional profile in Xcode preferences, so I tried by right-clicking on the provisional profile which shows the option to move to trash, but when I clicked nothing happened then I closed the preference window and open it again by Command, the provisional profile was gone and download option was visible, I clicked download and it starting working fine
When distribute to App Store, you choose Product -> Achieve and encounter "code sign error, no matching provisioning profiles found", if account and downloaded .mobileprovision file is ok. Try click the "Build and Run" button to run it on your phone.
And, a dialog box will popup with a button "Fix", just click "Fix" to do next... Last, your device will have an valid provisioning file. Just do "Product -> Achieve" again, everything is OK!
You can also simply go to xcode preferences then accounts and then it may ask you to simply re sign in with your developer profile and then the issues should go away.
Hope this Helps!
For me changing the build configuration from release to Debug solved the issue.
You can find Build Configuration in Edit Scheme -> Run -> Info -> Build Configuration
Clean your project and re run.
In addition to what other users posted, make sure the Team selected on the Target settings (General tab) is the correct one. Xcode will complain it cannot find the Provisioning Profile if the profile belongs to a different team than the one selected.
For me nothing above worked with XCode 7.3.1 because I had nothing in provisioning profiles (expired). I had to connect my iPhone to Mac and then click on Fix provisioning profile which created another profile expires in a week.
For everyone who didn't solve it yet, my Issue was answered by this:
https://stackoverflow.com/a/41202884/3953197
After I have a few hours searching and trying I have two solutions
1- run the app using IOS real device.
2- turn off the automatically manage signing, go to https://developer.apple.com/account/resources/profiles/, and create a profile now on the Provisioning Profile import it and done.
For me none of the solution worked, but If i disconnect the phone from laptop and then run the build, it succeeds and then I connect and run on the phone. I still couldn't figure out the final fix.
Before upgrading Xcode to 7.2, I was using Xcode 7.1.1 to build and distribute apps. I have upgraded to Xcode 7.2 and none of my provisioning profiles (matched to that particular app's bundle ID) match my installed certificates that were working in Xcode 7.1.1.
I only get:
Your build settings specify a provisioning profile with the UUID “some_number”, however, no such provisioning profile was found.
I have tried regenerating a .certSigningRequest to generate a new Certificate and Profile and made sure the Team in the General tab of the target is correct. Whenever I select a Provision Profile, all of my Code Signing Identities appear in the Identities in Keychain, but none of them will pair correctly.
It seems setting the Provision Profile to Automatic and the Code Signing Identity to iOS Developer will resolve this error, but the advantage of managing my Provisioning Profiles is gone as I believe Xcode then manages these.
Any thoughts on why setting my Provisioning Profiles and Code Signing Identities to anything but Automatic and iOS Developer produces this error?
I also had some problems after updating Xcode.
I fixed it by opening Xcode Preferences (⌘+,), going to Accounts → View Details. Then select all provisioning profiles and delete them with backspace (note: they can't be removed in Xcode 7.2). Restart Xcode, else the list doesn't seem to update properly.
Now click the Download all button, and you should have all provisioning profiles that you defined in the Member center back in Xcode. Don't worry about the Xcode-generated ones (Prefixed with XC:), Xcode will regenerate them if necessary. Restart Xcode again.
Now go to the Code Signing section in your Build Settings and select the correct profile and cert.
Why this happens at all? No idea... I gave up on understanding Apple's policies regarding app signing.
Try restarting XCode first, before trying these other answers. I was about to follow the advice given in other answers, then noticed multiple people saying that restarting XCode was necessary after all the steps. All I did was restart XCode and it fixed the problem. Who knows if it'll fix the problem for you, but it's worth a shot before trying the other solutions. I'm on XCode 7.2.1.
Keep quitting Xcode until the damn thing works.
I've also the same problem, in Xcode 7.2
It solved by followings steps:-
1) Open Xcode preference,
2) Select the appropriate team,
3) Click the "View Details..".
4) In section "Signing Identities": click on "Reset" for each of them.
5) In section "Provisioning Profiles". Click on "Download All".
6) Click on "Done."
7) Go in Xcode, build settings, select it. In General tab, the issues should get removed.
8) Restart the Xcode.
9) Do the Final build.
That's all.
Download https://developer.apple.com/certificationauthority/AppleWWDRCA.cer and add it to Keychain access > certificates (which expires on 2023)
Also after I did all of suggested steps (btw, for some reasons backspace not remove provision profile) error keeping occurring. Until I finally figured out to Restart Xcode.
Probably, it should be first step when you're dealing with Xcode :)
Using Xcode 7.3, I spent way too much time trying to figure this out -- none of the answers here or elsewhere did the trick -- and ultimately stumbled into a ridiculously easy solution.
In the Xcode preferences team settings, delete all provisioning profiles as mentioned in several other answers. I do this with right click, "Show in Finder," Command+A, delete -- it seems these details have changed over different Xcode versions.
Do not re-download any profiles. Instead, exit your preferences and rebuild your project (I built it for my connected iPhone). A little while into the build sequence there will be an alert informing you no provisioning profiles were found, and it will ask if you want this to be fixed automatically. Choose to fix it automatically.
After Xcode does some stuff, you will magically have a new provisioning profile providing what your app needs. I have since uploaded my app for TestFlight and it works great.
Hope this helps someone.
Check your Keychain - look in Login and System keychains for expired certificates or error messages.
I found certs with "this certificate has an invalid user" error messages, and an expired Apple Worldwide Developer Relations Certificate.
Delete them and install the new AWDRC certificate from https://developer.apple.com/certificationauthority/AppleWWDRCA.cer
Then follow the accepted answer to get Xcode to use the new certificates.
For me I tried following 2 steps which sadly did not work :
deleting all provisional profile from Xcode Preferences Accounts → View Details , downloading freshly all provisional profiles.
Restarting Xcode everytime.
Instead, I tried to solve keychain certificate related another issue given here
This certificate has an invalid issuer Apple Push Services
This certificate has an invalid issuer
In keychain access, go to View -> Show Expired Certificates.
Look for expired certificates in Login and System keychains and an "Apple Worldwide Developer Relations Certification Authority".
Delete all expired certificates.
After deleting expired certificates, visit the following URL and download the new AppleWWDRCA certificate, https://developer.apple.com/certificationauthority/AppleWWDRCA.cer
Double click on the newly downloaded certificate, and install it in your keychain. Can see certificate valid message.
Now go to xcode app. target → Build Setting → Provisioning Profile . Select value from 'automatic' to appropriate Provisioning profile . Bingo!!! profile mismatch issue is solved.
In my case, the problem was that the Archive was being built with a different TEAM-ID than the one who generated the Provisioning Profile (Me). Therefore I Got the error:
"No matching provisioning profile found: Your build settings specify a provisioning profile with the UUID, however, no such provisioning profile was found."
To Solve this:
Clean and Re-Download your Provisioning profiles from Settings
Re-Start Xcode
in the GENERAL Tab of the Project properties, got to TEAM:
Change the current team to the Same team but the one under the ACCOUNT you generated the provisioning profile with.
Clean & Build
Viola!
Hope this helps someone.
I updated to Xcode v7.3.1 and it solved the issue.
With Xcode 7.2.1, if you are certain that your provisioning profile is correct (it has the correct App ID and certificate, and the corresponding certificate exists in your Keychain Access) then set the Code Signing Identity and set the Provisioning Profile to Automatic.
What I did was: created a new provisioning profile and used it. When setup the provisioning profile in the build setting tab, there were the wrong provisioning profile numbers (like "983ff..." as the error message mentioned, that's it!). Corrected to the new provisioning profile, then Xcode 7.2 refreshed itself, and build successfully.
Solutions described here work, but I want to add that you need to have correct target selected on the top left corner of Build Settings in Xcode. Lost some time figuring this out...
You can easily fix the problem by changing bundle identifier on the Apple web page from com.my.app to com.my.app.iOS. I found this solution at https://forums.developer.apple.com/thread/15712.
In Xcode 7.3 I got the same error, my certificate and provisional profile both were fine still I was getting the same error, I was unable to delete the provisional profile in Xcode preferences, so I tried by right-clicking on the provisional profile which shows the option to move to trash, but when I clicked nothing happened then I closed the preference window and open it again by Command, the provisional profile was gone and download option was visible, I clicked download and it starting working fine
When distribute to App Store, you choose Product -> Achieve and encounter "code sign error, no matching provisioning profiles found", if account and downloaded .mobileprovision file is ok. Try click the "Build and Run" button to run it on your phone.
And, a dialog box will popup with a button "Fix", just click "Fix" to do next... Last, your device will have an valid provisioning file. Just do "Product -> Achieve" again, everything is OK!
You can also simply go to xcode preferences then accounts and then it may ask you to simply re sign in with your developer profile and then the issues should go away.
Hope this Helps!
For me changing the build configuration from release to Debug solved the issue.
You can find Build Configuration in Edit Scheme -> Run -> Info -> Build Configuration
Clean your project and re run.
In addition to what other users posted, make sure the Team selected on the Target settings (General tab) is the correct one. Xcode will complain it cannot find the Provisioning Profile if the profile belongs to a different team than the one selected.
For me nothing above worked with XCode 7.3.1 because I had nothing in provisioning profiles (expired). I had to connect my iPhone to Mac and then click on Fix provisioning profile which created another profile expires in a week.
For everyone who didn't solve it yet, my Issue was answered by this:
https://stackoverflow.com/a/41202884/3953197
After I have a few hours searching and trying I have two solutions
1- run the app using IOS real device.
2- turn off the automatically manage signing, go to https://developer.apple.com/account/resources/profiles/, and create a profile now on the Provisioning Profile import it and done.
For me none of the solution worked, but If i disconnect the phone from laptop and then run the build, it succeeds and then I connect and run on the phone. I still couldn't figure out the final fix.
I've build a new application which is going to support IOS 7. I got the new XCode 5 GM and tried to sign my apps using my fresh provisioning profile and distribution certificate, but i'm having trouble with distribution. I constantly get the following error:
"Invalid Code Signing Entitlements. The entitlements in your app
bundle signature do not match the ones that are contained in the
provisioning profile. According to the provisioning profile, the
bundle contains a key value that is not allowed:
'[XXXX.com.sample.company ]' for the key 'keychain-access-groups".
Also the same error for a key value called application-identifier.
Screenshot of the errror:
The solution lies in the new option in Xcode 5 which says provisioning profile. Just set the project target's provisioning profile to the right one and it'll work.
If you are like me and you think you tried EVERYTHING, archived your project over ten times, banged your head on the keyboard and still get this error. Please do yourself a favor and simply Restart XCode, it worked for me. Sometime Apple... I hate you.
I went through many of the steps above but what finally worked for me was refreshing my profiles in Xcode. Not sure why it was necessary since my app's distribution profile was showing up in the list already. Here are the steps:
Xcode Preferences
Accounts tab
Select your Apple ID
Hit the View Details button in the Apple ID detail panel
Hit the Refresh button in the lower left corner
In my case, i activated the same capabilities in Xcode that in Application services in developer.apple.com. Thats works for me
In my case (sorry) I switched "Team" to "None" in -> General -> Identity
In another case I needed to switch this identity from "None" to the developer account managing the identities and profiles.
Xcode sometimes messes up greatly with code signing, it seems. Or, we mere mortals simply aren't clever enough to understand what it is doing, of course. Don't give up, we're all going through some code signing torture at times!
In my case, I had to set correct Provision Profile for Release, and then had to restart Xcode. Before restarting, it had same provision profile, and didn't work. So, sometimes a restart can do miracles. Maybe this helps somebody.
If someone uses a GameCenter then check this section in your target. I worked with some old project and there were 2 errors (but everything worked fine). Disabling and enabling it back solved this problem.
Most likely this action adds Game Center entitlement to App ID and and handle it itself.
1.Go to project folder, delete *.entitlements files.
2.Then go yo in xcode project target -> build settings -> code signing entitlements - delete values
3.Clean
4.Run
Ah, this glorious error. For me whenever I see this error I check the following things:
1. Allow XCode to access your provisioning profile info all the time - If XCode keeps asking when you start it up to have access to your computer's private files so that it can get provisioning profile information with the options to allow access always, not now, or just one time - set it to ALWAYS ALLOW access
2. If you have any old entitlement files kicking around your project get rid of them and any sign of them - if you see a .entitlements file in your project delete it (or at least remove the reference to it if you aren't sure you are ready to outright delete it), then make sure the 'Code Signing Entitlements' line under the 'Code Signing' section in Build Settings is empty
3. Check your Application Services online and match them up with your Services in XCode for the app - Go to the Apple Member Center and check the App ID for your app, click on the app to see its 'Application Services' and see what you have checked, then go to XCode and check your 'Capabilities' section to make sure the two have the same list of Apple services on both
4. Make sure you assign a valid Provisioning Profile to your app before validating - double check your provisioning profile for your app in the Apple Member Center, make sure it isn't expired, has the right App ID with the correct bundle id and distribution. Download and click on the new provisioning profile to make sure XCode has it, or go to XCode > Preferences > Accounts > click on your account and 'View Details' then click the bottom corner button to Sync all the profiles to XCode. You should have the profile available to select now in the 'Code Signing' section. Once you have the correct provisioning profile then you can set the 'Code Signing Identity' lines to the correct option for that provisioning profile.
Note - if doing a distribution certificate it can help to set all the 'Code Signing Identity' lines to the identity you use for distribution including the debug lines
5. IF ALL ELSE FAILS - Clean your project and Restart XCode and some Apple magic may just work fine the next time you open your project and try to Validate
If you're building an old 3.1.5 project, Xcode 5 has some bugs which unfortunately makes Benjamin's answer impossible, as there are no Provisioning profiles to pick from. After many a late hour of tormented reading of Xcode project files I came up with this solution that worked for me:
In the Utilities pane (to the right) in Xcode 5, under project Document, change from Xcode 3.1-compatible to Xcode 3.2 compatible.
Enter your organization name.
Close project.
Open your project file, e.g. open -a TextEdit path/to/name.xcodeproj/project.pbxproj
Remove the two Distribution clauses (isa=XCBuildConfiguration).
Remove the two accompanying lines in buildConfiguration (one in PBXNativeTarget and one in PBXProject XCConfigurationLists)
Now you're ready to re-open, archive and submit to App store - voilà! It works again!
How I think it works
I assume this works because Apple somewhere along the line decided to drop the need for any separate distribution config, which is a good thing. When I archive, Xcode automatically code signs for distribution. That's the way it should have been implemented in the first place, it's just a shame that Apple can't make auto-migration part of the IDE; instead they force us developers to spend man-decades to make this stuff work.
I have been struggling with this problem for more than a day now, trying all kinds of solutions suggested here and elsewhere on the internet. Nothing worked...
But, I finally managed to solve the problem!
The problem I had was with an old app that I haven't touched in over 3 years, and now I was about to release a long awaited update. Since the time I released the app, Apple has been updating how the certificates and App Id works. They have introduced the concept of Team Id which seems to be recommended to use.
In particular, the Apple's "Certificates, Identifiers & Profiles" site, has seen a lot of changes since then.
There I realized that the Provisioning Profile I was using for App Store Distribution were connected to the App Id ED8xxxxxxx.com.rostsolutions.* but looking at the App Id for the game I was about to submit I notice that the App Id was ATMxxxxxxx.com.rostsolutions.Swisch. So the App Id prefix did not match!
That seemed to be the root of the problem. So what I did was to create a new Provisioning Profile connected to the App Id ATMxxxxxxx.com.rostsolutions.Swisch instead. Using that Provisioning Profile I successfully submitted my app to App Store and now I just keep my fingers crossed that everything else works fine at Apple's side.
(I first tried to connect to new Provisioning profile to the wildcard Id ATMxxxxxxx.com.rostsolutions.* instead, but that didn't seem to work).
But what puzzles me is that when I look at the old App in iTunes Connects and goes to Binary Details, it says that the App Id is ED8xxxxxxx.com.rostsolutions.Swisch. So why is the "Certificates, Identifiers & Profiles" page listing the App Id as ATMxxxxxxx.com.rostsolutions.Swisch?
My problem was solved by removing my Apple ID from Preferences->Accounts and then adding it back again. Then all my provisioning profile files showed up on the View Details utility panel. I was mistakenly choosing "Mac Team Provisioning Profile:*" instead of the actual distribution provisioning profile for the project thinking that it was a generic selection. Provisioning files must be specific to the project. Oh, and BTW, make sure your provisioning profile has the correct entitlements (for example, Maps). I managed to release an app with OSX Maps without the entitlement and Apple approved it -- but no Maps showed up on the production version!
In my case, I had the same problem, my solution was to change the 'Release Provisioning Profile' in the Build Settings before doing Archive. I do this twice, once for App Store distribution, and another one for Ad Hoc distribution. I also add a comment on my archives. My conclusion is that there is something broken about the "archive re-signature".
There is a very good tutorial for solving that problem on this website.
It says that this problem can occur when your Projects Bundle Identifier is different to the one you entered on the iTunes Connect Website.
I think xcode 5 uses "release" instead of "distribution" that you may created yourself.
If all above didn't work (in my case after couple of days no luck trying everything) I have only one Mac application. BE CAREFULL WITH REVOKE!
1) Revoke by hand all "Mac App Distribution" & "Mac Installer Distribution"
2) Clean relevant certificates and open-keys in Keychain (Warning: export before delete)
3) Restart Xcode
4) Go to (in Safari) developer.apple.com -> certificates etc.
5) Create CertificateSigningRequest.certSigningRequest in Keychain->Certificate assistant
6) Create by hand on developer.apple.com both "Mac App Distribution" & "Mac Installer Distribution" with your *.certSigningRequest
7) Provisioning Profiles -> Distribution -> create/fix custom provision for AppStore (I'm specially named it as "Mac provision profile for AppStore"
8) Xcode -> Settings -> Account -> Your account -> Refresh
9) Xcode Clean -> Archive -> Validate
I have been struggling with similar problem (I was building for Ad-Hoc distribution). Only thing that has changed since last successful deploy, was adding two devices to provisioning profile.
After double- and triple- checking all build settings, I regenerated provisioning profile (without changing anything), re-downloaded and it worked fine.
So note to self: if there is no logic explanation, you can always try good old IT voodoo.
I also recommend iPhone Configuration Utility, which despite its name, is useful for checking what provisioning profiles you have on computer.
ERROR ITMS-9000: “This bundle is invalid. New apps and app updates submitted to the App Store must be built with public (GM) versions of XCode 5.1.1 or higher and iOS 7 SDK. Do not submit apps built with beta software.
If multiple developers are using the same member center account. One of them can't use a certificate created by others cause they used a certificate request created using their computers.
You need to use a certificate created by you (certificate request
created using your computer).
Alternative, told them to send you the Developer Profile. not sure of the name. to use a certificate created on another computer.
Code signing Entitlements occur because of your resource does not contain Entitlements file in resources,Just go to build setting and search code signing Entitlements delete entry for debug and release, build project again you will see there is no error. Cheers
I had the same problem, but nothing written here worked for me. However, I found a simple way that worked for me. Here's how to do it:
1) In your Project and your Target(s) build settings, choose "None" for all Provisioning profiles, and choose "Don't Code Sign" for all Code Signing Identities.
2) Now, choose your Target and go to build settings. In Code Signing Identity Release setting, choose "iOS Distribution" for "Any iOS SDK". And then, in Provisioning Profile Release setting, choose your distribution profile for "Any iOS SDK". After that your Code Signing Identity Release setting should automatically change to "iPhone Distribution".
3) Archive your build and validate. Now it should work fine. That's it!
This question already has answers here:
The executable gets signed with invalid entitlements in Xcode
(40 answers)
Closed 2 years ago.
I would install an application in my mobile phone by using Xcode but it was not installed with following an error message.
Error Message
"The executable was signed with invalid entitlements.
The entitlements specified in your application’s Code Signing Entitlements file do not match those specified in your provisioning profile. (0xE8008016)"
Matters of Inquiry
Why does the error message occur while I install the application?
Would you mind if you can give me the solution of this problem?
Check if you are using Entitlement file in Build Setting > Code Signing Section.
If yes, try deleting that file name.
You are using Entitlement file
The entitlements file defines certain capabilities of your app. Usually, the file is automatically generated by Xcode when you enable a capability for your app. You only need the file if you enable certain capabilities, e.g. Healthkit integration. If you'd like to use these features, you have to add it. Otherwise, Apple will reject your app.
To fix this
Go to the build settings of your target.
Make sure that you have "All" selected instead of "Basic"
Type "entitlements" into the search box
The result is the build setting where you can specify where your
entitlements file is located
Remove them
You are using the wrong Provisioning Profile
A provisioning profile is a collection of digital entities that uniquely ties developers and devices to an authorized iPhone Development Team and enables a device to be used for testing. A Development Provisioning Profile must be installed on each device on which you wish to run your application code.
Go to Build Settings > Code Signing > Provisioning Profile
Select a development profile under Team
Please ensure that the Team in the project, target and tests are the same.
Bundle Identifier and App ID do not match
Go to the build settings of your target
Select Packaging and change your App ID to match the Bundle ID
Clear cache in Xcode
Command-Option-Shift-K to clean out the build folder. Even better, quit Xcode and clean out ~/Library/Developer/Xcode/DerivedData manually.
You are using wrong provisioning profile to build your app on devices make sure you are using right type of profile. I was using App Store Deployment profile to build on devices. Use ad-hoc profiles or development profiles to build on your devices.
You are using the wrong Provisioning Profile i.e. Distribution for development. Go to Build Settings > Code Signing > Provisioning Profile and select a development profile.
Check the if your "Code Signing" configurations are same on "PROJECT>Build Settings" and "TARGETS>Build Settings".
Personnally, I use for both:
- "Code Signing identity": iOS Developer
- "Provisioning Profile" : Automatic
Check your "Team" parameter at your targets. It should be the same for your project and tests.
For me none of the above answers worked. I tried to remove every code signing certificate from Keychain and build the app. When I resolved all code signing related errors for my target I still had some of them in Tests target. It has been set by someone else from my team before. I just switched to iOS Developer, and the invalid entitlement error went away.
I was getting this problem after moving app from one account to another. I tried all the solutions given by others, those might be correct in other cases. But I fixed the problem by going File -> Workspace Settings -> Build System and choosing "Legacy Build System". I'm using XCode 10.3.
I faced this problem and my problem was My Bundle Identifier and AppID was not matched. Please change your Bundle Identifier in Build Settings->Packaging like your AppID.
Just goto Apple developer portal from where you have downloaded provisioning profile.
Select your profile click edit and check whether all certificates are selected or not.
In my case selecting all certificates and downloading that new profile solved the above mentioned issue.
Also make sure in your schema you have set "Build configuration" to the correct configuration, in most cases "Debug".
I got this error when export the ipa with App Store provisioning wrongly during CI process. My intention was to export with Adhoc provisioning.
I had the same error. My problem was that I checked 'Enable HealthKit' in Entitlements.plist, but I did not enable HealthKit when I created the App Id.
In short, all entitlements in your app (Entitlements.plist file in your project) should be configured on the provisioning profile you use (Provisioning profile = app ID + certificate + information about devices your app can run on).
Had the same problem that suddenly popped up in my project from one day to the next.
What fixed it for me was turning "Automatically manage signing" off and on again for both targets and making sure the right development team was selected once it was on again (defaults to none in my project).
It could seems a easy solution but I solved updating my iPhone's iOS version.
All answers I have seen talk only about xcode update. It was strange because my old iOS version was iOS 13.3.3 and it worked on another iPhone with iOS 13.6. After updating to iOS 13.7 it worked.
I have an error "No identities are available for signing" when try to validate my app in Xcode 5. I tried all: Recreate certificates and provisioning profiles, all methods which have been described on this site and another resources; I'm confused, because when I try to distribute my app as Ad-hoc, it successfully create and install on test device an IPA file. But when I try validate my app or submit to AppStore, all the time I have an error. Maybe someone can help me with this issue.
All you need to do is:
go to Certificates, Identifiers & Profiles in the Developer Center
create a new provisioning profile in "Provisioning Profiles" / "Distribution"
download the profile and open it
restart Xcode
Please make sure you are using distribution provisioning profiles, rather than Development.
And the code sign setting in Xcode is compatible with the distribution provisioning profiles.
The validation process does not work with Ad-hoc profiles. Need to create a Distribution provisioning profile. It is not specified in the instructions for beta testing. I agonized all day until realized.
Use the Application Loader (Xcode -> Open Developer Tool -> Application Loader).
Also - this answer/question may also be helpful for you:
https://stackoverflow.com/a/18914073/730172
Restarting Xcode solved the problem for me! Restart and/or clean solves 99% of all issues...
#CainaSouza 's comment above worked for me. I didn't even have to create any new provisioning profiles.
I just had to go to Xcode > Preferences > Accounts > (Apple ID) > View Details and hit the refresh button. After a minute or two it was done and had loaded my provisioning profiles. I didn't even have to select it in my project options, it had already selected my most recently generated one.
Clean your Product Build Folder (with Alt button)
Restart Xcode
It solved my same issue
I had a similar issue. Found out that the bundle identifier did not match the app id that was on itunes connect - it was capitalized differently. Fixed the issue by making the identifiers match.
Yes the appID and bundle identifier must match. Remember it is CASE-SENSITIVE. That was the problem for me.
I updated to Maverick and Xcode 5 and had the same issue even though I had everything ok in Profiles. I created a new Distribution profile (identical to the old one), added it by refreshing profiles and the issue was solved without rebuilding.
Apple Decided to "Magically Dissapear" my distribution provisioning profile from their site after upgrading to a newer Xcode, giving me this problem too.
Solution is obvious only once I had discovered this fact!
-Create new Distribution Provisioning Profile
-Download & install it / Refresh Xcode preferences under account details
I fixed this issue by delete the old development/distribute profiles and create new one with new names.
I had a mismatch between the Bundle Identifier within Xcode and the App ID on Developer.Apple.Com (Certificates, Identifiers & Profiles). This StackOverflow post was a great help to me. For a little extra info check out this blog post. The official documentation for the touch command can be found here. I had quit Xcode before doing the below. Upon completion of the details below and reopening Xcode my issue was resolved.
Use a text editor to update the bundle identifier to match the App ID, the Info.plist file is located:
ProjectName > ProjectName > ProjectName > ProjectName-Info.plist
Your looking for the following lines:
<key>CFBundleIdentifier</key>
<string>MyCompany.${PRODUCT_NAME:rfc1034identifier}</string>
Update the value to match you App ID, eg:
<string>com.MyCompany</string>
Use the terminal to issue the touch command, ensure your within the above listed directory:
touch ProjectName-Info.plist
If you are using Xcode 5.1 or above (which you would be now), this helped me: Code signing broken on Xcode 5.1 + iOS 7.1
The key is to delete the old provisioning profile on your mac and create a new one (with a different name?) from Apple web site and download it. Looks like Xcode 5.1 corrupts the existing provisioning profile and it does not help even if you re-download it again.
My solution was to go into the dev center, find the distribution provisioning profile, and it had expired. So i tapped edit on it, and renewed it, downloaded it, installed it, chose the profile in the build settings, and it worked.
HTH someone.
Of all the development issues I've faced over my 20+ years as a software developer, none have wasted so much time as the code-signing/provisioning profile rubbish in Xcode.
This week, I have wasted 8+ hours trying to build an Ad-hoc release of our iPhone app. In the past, it just worked, I could Archive, stick a download button on our in-house webpage, and users could just install our app from this page.
But, this week, I was facing the same "No identities are available" issue, described here.
EVENTUALLY, here's what solved the issue for me:
When I logged into the hopeless Apple Developers website, it showed that our company had 2 "iOS Distribution" certificates. They were valid, their expiry dates are months away, and in the Keychain Access application, the certificates were installed and valid... no problems here.
But what fixed my issue was to delete these two certificates, recreate a new one, then recreate my "In house" Provisioning Profile (as the original one was now showing as being invalid, as it used the old "iOS Distribution" certificate).
I also went into the "Keychain Access" application on my MacBook, and deleted all "iOS Distribution" keychains.
Then, I downloaded the new certificates & provisioning profiles, now, finally, Xcode would report that there was an identity which I could code-sign with.
To the Xcode development team:
Please. Get this fixed.
If a developer like myself, is up against a wall, unable to get a valid Provisioning Profile, which will result in a downloadable app, which will fail each time on "The app couldn't be downloaded at this time" message.. DON'T allow the Archive function to be used.
Instead, TELL the user what the problem is. HELP them resolve it, rather than going through the motions, and happily allowing them to create Archives which will never be useable.
And if an Ad-Hoc install is invalid, please put something in the Log to explain what's gone wrong, and make this accessible from Xcode. Currently your "The app can't be downloaded at this time" message is both useless and misleading.
One last thing (if this helps):
Our company accidentally let its Developer Enterprise Program license expire last month. We did then renew, everything was seemingly okay again, but perhaps, behind the scenes, this messed up our "iOS Distribution" certificate ? And perhaps, not. From the Apple website's point of view, everything was fine.
My issue was that I had none.myApp in my Bundle Identifier whereas in the AppID, I had com.myApp.
This drove me crazy for hours.
I ran into this issue today and it seems to be related to the face that the profile started with a number. I deleted the profile and recreated it exactly the same way (after a lot of other troubleshooting steps found on SO) EXCEPT this time I started with a word instead of a number. Coincidence? Not sure but worth trying.
Had this yesterday and could not figure it out, no matter what I did! To solve the problem, I went to both the Project and the Target in Xcode, and under code signing, chose
Code signing identity: Don't code sign
Provisioning profile: None
Build, and then Product > Archive, and now Organizer chose the correct code signing identities and profiles to allow it to get to the Validation step. Woohoo!
It happen to me after update Xcode.
I fixed doing the follow
change the sign in to "no sign"
restart Xcode
set it to the correct sign
re-archive the build
I hope it helps
Apple Documentation
"If Xcode doesn’t find signing identities, a dialog stating “No identities are available for signing” appears. Verify that you have a distribution certificate and an ad hoc provisioning profile before continuing.
If your ad hoc provisioning profile doesn’t appear in the Provisioning Profile pop-up menu when you create the iOS App Store Package, refresh the profiles in Xcode, as described in “Refreshing Provisioning Profiles in Xcode.”"
In my case, the adhoc provisioning that I wanted to set was not selectable in Code Signing in Build Settings. Though, I created and downloaded the adhoc provisioning from developer store. The answers mentioned here didn't work for me. Fix Issue button in General tab fixed the issue by downloading the required adhoc provisioning file by itself.
Creating a new certificate, Profile in Apple development center did not work for me! I tried editing a profile/certificates and download again and double click to install in KeyChain, but still did not work. I restarted XCode (Version 7 and Mac on El Capitan), restarted Mac but still did not work!
What worked for me is:
XCode -> Preferences -> Accounts - Then I deleted the Apple ID.
Shutdown my Mac, and restarted it.
Started my XCode, added the Apple ID, went to view details in Apple ID's and downloaded the Provisional Profile again and only then it started working!
Restarting solved my problem. I have a new mac and tried downloading the profiles, which should've transferred anyways. restarting solved it.