This question already has answers here:
The executable gets signed with invalid entitlements in Xcode
(40 answers)
Closed 2 years ago.
I would install an application in my mobile phone by using Xcode but it was not installed with following an error message.
Error Message
"The executable was signed with invalid entitlements.
The entitlements specified in your application’s Code Signing Entitlements file do not match those specified in your provisioning profile. (0xE8008016)"
Matters of Inquiry
Why does the error message occur while I install the application?
Would you mind if you can give me the solution of this problem?
Check if you are using Entitlement file in Build Setting > Code Signing Section.
If yes, try deleting that file name.
You are using Entitlement file
The entitlements file defines certain capabilities of your app. Usually, the file is automatically generated by Xcode when you enable a capability for your app. You only need the file if you enable certain capabilities, e.g. Healthkit integration. If you'd like to use these features, you have to add it. Otherwise, Apple will reject your app.
To fix this
Go to the build settings of your target.
Make sure that you have "All" selected instead of "Basic"
Type "entitlements" into the search box
The result is the build setting where you can specify where your
entitlements file is located
Remove them
You are using the wrong Provisioning Profile
A provisioning profile is a collection of digital entities that uniquely ties developers and devices to an authorized iPhone Development Team and enables a device to be used for testing. A Development Provisioning Profile must be installed on each device on which you wish to run your application code.
Go to Build Settings > Code Signing > Provisioning Profile
Select a development profile under Team
Please ensure that the Team in the project, target and tests are the same.
Bundle Identifier and App ID do not match
Go to the build settings of your target
Select Packaging and change your App ID to match the Bundle ID
Clear cache in Xcode
Command-Option-Shift-K to clean out the build folder. Even better, quit Xcode and clean out ~/Library/Developer/Xcode/DerivedData manually.
You are using wrong provisioning profile to build your app on devices make sure you are using right type of profile. I was using App Store Deployment profile to build on devices. Use ad-hoc profiles or development profiles to build on your devices.
You are using the wrong Provisioning Profile i.e. Distribution for development. Go to Build Settings > Code Signing > Provisioning Profile and select a development profile.
Check the if your "Code Signing" configurations are same on "PROJECT>Build Settings" and "TARGETS>Build Settings".
Personnally, I use for both:
- "Code Signing identity": iOS Developer
- "Provisioning Profile" : Automatic
Check your "Team" parameter at your targets. It should be the same for your project and tests.
For me none of the above answers worked. I tried to remove every code signing certificate from Keychain and build the app. When I resolved all code signing related errors for my target I still had some of them in Tests target. It has been set by someone else from my team before. I just switched to iOS Developer, and the invalid entitlement error went away.
I was getting this problem after moving app from one account to another. I tried all the solutions given by others, those might be correct in other cases. But I fixed the problem by going File -> Workspace Settings -> Build System and choosing "Legacy Build System". I'm using XCode 10.3.
I faced this problem and my problem was My Bundle Identifier and AppID was not matched. Please change your Bundle Identifier in Build Settings->Packaging like your AppID.
Just goto Apple developer portal from where you have downloaded provisioning profile.
Select your profile click edit and check whether all certificates are selected or not.
In my case selecting all certificates and downloading that new profile solved the above mentioned issue.
Also make sure in your schema you have set "Build configuration" to the correct configuration, in most cases "Debug".
I got this error when export the ipa with App Store provisioning wrongly during CI process. My intention was to export with Adhoc provisioning.
I had the same error. My problem was that I checked 'Enable HealthKit' in Entitlements.plist, but I did not enable HealthKit when I created the App Id.
In short, all entitlements in your app (Entitlements.plist file in your project) should be configured on the provisioning profile you use (Provisioning profile = app ID + certificate + information about devices your app can run on).
Had the same problem that suddenly popped up in my project from one day to the next.
What fixed it for me was turning "Automatically manage signing" off and on again for both targets and making sure the right development team was selected once it was on again (defaults to none in my project).
It could seems a easy solution but I solved updating my iPhone's iOS version.
All answers I have seen talk only about xcode update. It was strange because my old iOS version was iOS 13.3.3 and it worked on another iPhone with iOS 13.6. After updating to iOS 13.7 it worked.
Related
The executable was signed with invalid entitlements.
The entitlements specified in your application’s Code Signing Entitlements file do not match those specified in your provisioning profile.(0xE8008016).
I am getting this error. please help me.
I have create the provisioning profile and change the bundle id. I have enable the keychain sharing from Target->Capabilities and generate the new .entitlement file. and i have also change the bundle id in that.
In my case (using XCode 10.0) nothing worked but this:
File > Project Settings... > Shared Project Settings: > Build System
--> Selected "Legacy Build System" instead of the default "New Build System (Default)".
For me in Xcode 5.1, I was getting The entitlements specified in your application’s Code Signing Entitlements file do not match those specified in your provisioning profile. when trying to test the app on my device. Device Development Certificate has to expire Feb 2015.
Issue was resolved:
Selected Target->Capabilities, under GameCenter, here I was getting error on GameCenter entitlement as it was not added to project, although first version of application was released via same XCode 5.1 but there were no errors like this before.
Below, a button was given with title Fix Issue. When clicked it added the GameCenter entitlement and issue was resolved.
After wards the screen looks like:
For me, there was nothing to do with certificate or bundle identifier. App now runs successfully on the device.
In XCode 7.3 I encountered the same question, I 've made the mistake because:
Name in (info.plist -->Bundle identifier) is not the same as (target-->build settings -->packaging-->Product bundle identifier). Just make the same, that solved the problem.
As others have pointed out, if you get this error, you need to check that the Bundle ID value in both your .plist file and also here:
First of all, you should check bundle id, provision profile and certificate with private key (.p12).
If it doesn't help. Be sure that the Code Signing Entitlements has correct value or remove it at all.
File > Workspace Settings > Build System > Legacy Build System
This worked for me.
Xcode 10.0
Reassign the value of Automatically manage signing, this works for me
In my case, the app main Target's Team was different from Tests' Target Team. Changing the Tests' Team to the same Team as main Target's solves the issue.
None of the previous answers either applied or worked for me. In my case, updating the settings of the test project, as follows, fixed it:
One possible reason for this error is: your annual subscription has been renewed. Once the subscription is renewed, all devices related to the active provision profiles will be detached.
The admin must reactivate the list of devices for the new subscribed year.
The admin must delete last year provision profiles. (all are useless).
The admin must regenerate new provision profiles for the new year with the list of devices of his choice.
After this, rebuild project with Xcode and the error will disappear.
Had this issue. My main app and extension belonged to the same app group id correctly, but there was also one more app ID not in my project that shared said app group id. I had to remove this last app ID's association with the app group.
I was having same issue on Xcode 7.3 with iPad Air 2 with iOS 9.3.4!
Then I tried many options.
Finally I deleted profile from device, changed bundle identifier in project settings, and whola!
It worked for me.
P.S. I was using free provision profile using free Apple ID.
for me, just press cmd+, then go to account ,chose your developer account refresh(XCODE6) OR download all (XCODE7) will fix.
This happened to me when I was trying to build an App-store ipa exported file on my device, I had to export ad-hoc instead.
You should check provision profile is Product or Develop, if your project use multi configuration
You should check configuration which called by schema, because it must make sure, your configuration was set provision Develop
Check your bundle identifier and your profiles. If you have a profile for a specific bundle identifier and no team ones and your bundle identifier does not match it will give you that error.
Bundle identifier is in General section of your project properties and the profiles you can check in build settings.
In my case, I had a duplicate Provisioning Profile with the same name. This was accidentally created when I added an share extension to my project, stash all of those changes with git, and created a new share extension with the same name (com.companyname.project.share-extension-name). Deleting the Provisioning Profile in the developer member center (developer.apple.com) fixed this for me.
Had this issue with a cordova / ionic3 app, was caused by forking a main app and not selected again the legacy system in project settings. I selected legacy and the entitlements bs went away.
Had the same problem, nothing was helping, but I looked in Info.plist and found out that bundle ID was changed to other name (I don't know how it happened), so when I changed it to correct one everything was fine again.
I have also this problem when I do with XCode project what is exported from cordova framework.
Resolution : You have to create Apple-ID and Provisioining-profile by yourself. Because Xcode seems to be unable to create it for you.
For me, it was an inconsistency between Debug profile (it was automatic) and Release profile (it was manual). Setting them both automatic/manual resolved the issue.
I had to delete all the provisioning profiles by following this article.
I have already searched and almost implemented max solution but it's not installing any app even though if I am creating just sample single view app.
App installation failed
A valid provisioning profile for this executable was not found.
============== update ====================
I fixed this issue today.
First, go to ~/Library/MobileDevice/Provisioning Profiles.
Make sure Xcode isn't running.
Then, delete all provisioning files (like xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx.mobileprovision).
Start Xcode.
You will see something like "Fix this issue" in your Target's General tab.
Click it.
Xcode will now load new provisioning profile.
That's it.
----------- OLD Answer -------------
I have same problem now.
I've checked my provisioning profile using https://github.com/chockenberry/Provisioning/releases.
In my case, my provisioning profile had the wrong UDIDs but right machine count.
I've registered machines, and Apple Developer Center listed right UDIDs for those machines.
However, whenever I downloaded new provisioning profile, it contained wrong UDIDs.
I think Apple's system is outputting wrong provisioning profile.
I called Apple support for this issue today, but Apple only emailed me with their knowledge base links(forums,documents,etc).
Possibly you are using App Store distribution provisioning profile. Use development or Ad-Hoc provisioning profile.
For Xcode 8 / Swift 3.0
In my case, for my app target and my extension in "General" I check "Automatically manage signing" and it work
I was having this issue because the date/time on my iPhone was not the same as that on my Mac running Xcode ( i changed the date on my iPhone while testing some app).
On my iPhone, i went to Settings > General > Date & Time > Set Automatically
This fixed it
Make sure you have added device UDID in your provisioning profile.
Go to provisioning portal.
Edit provisioning profile.
Make sure device is checked.
Done, download
Use new Profile
Another possible reason: Device date is set to later than the expiry of you provisioning profile.This is very weird but, it could happen.
In my case it was that the running option in the building scheme was set to Release so it was trying to sign it using the appstore provisional profile not the development or the adhoc one. I had to set it to Debug to fix this!
I could run on Simulator just fine, but trying to install the App on device was throwing this exact error.
I had a test target in addition to the main target. The test target had signing set to a different team and profile. Setting the unit test target to match the main target settings for signing solved my issue.
Didn't notice it had been automatically changed over to a different team, was caused by being added to a new Enterprise team.
In my case, I went to the Apple Developer website and added the phone to the Provisioning Profile.
Then I re-downloaded the Provisioning Profile and worked =)
In my case was The build system. I had to change the default build system in "File > Project / Workspace Settings" and change it to the Legacy Build system.
For me, it's because the project I was trying to build is someone else's. The bundle identifier does not match with my team's provisioning profile.
Change bundle identifier to something else help.
In my case, my certificate is overdue..
The following worked for me:
Install the app using Personal provision profile (re-install after going into your phone settings and trusting the profile)
Delete the app from ypur phone
Switch back to registered developer profile and try again
In my case iOS 14.4, rebooting the iPhone solved it.
I've build a new application which is going to support IOS 7. I got the new XCode 5 GM and tried to sign my apps using my fresh provisioning profile and distribution certificate, but i'm having trouble with distribution. I constantly get the following error:
"Invalid Code Signing Entitlements. The entitlements in your app
bundle signature do not match the ones that are contained in the
provisioning profile. According to the provisioning profile, the
bundle contains a key value that is not allowed:
'[XXXX.com.sample.company ]' for the key 'keychain-access-groups".
Also the same error for a key value called application-identifier.
Screenshot of the errror:
The solution lies in the new option in Xcode 5 which says provisioning profile. Just set the project target's provisioning profile to the right one and it'll work.
If you are like me and you think you tried EVERYTHING, archived your project over ten times, banged your head on the keyboard and still get this error. Please do yourself a favor and simply Restart XCode, it worked for me. Sometime Apple... I hate you.
I went through many of the steps above but what finally worked for me was refreshing my profiles in Xcode. Not sure why it was necessary since my app's distribution profile was showing up in the list already. Here are the steps:
Xcode Preferences
Accounts tab
Select your Apple ID
Hit the View Details button in the Apple ID detail panel
Hit the Refresh button in the lower left corner
In my case, i activated the same capabilities in Xcode that in Application services in developer.apple.com. Thats works for me
In my case (sorry) I switched "Team" to "None" in -> General -> Identity
In another case I needed to switch this identity from "None" to the developer account managing the identities and profiles.
Xcode sometimes messes up greatly with code signing, it seems. Or, we mere mortals simply aren't clever enough to understand what it is doing, of course. Don't give up, we're all going through some code signing torture at times!
In my case, I had to set correct Provision Profile for Release, and then had to restart Xcode. Before restarting, it had same provision profile, and didn't work. So, sometimes a restart can do miracles. Maybe this helps somebody.
If someone uses a GameCenter then check this section in your target. I worked with some old project and there were 2 errors (but everything worked fine). Disabling and enabling it back solved this problem.
Most likely this action adds Game Center entitlement to App ID and and handle it itself.
1.Go to project folder, delete *.entitlements files.
2.Then go yo in xcode project target -> build settings -> code signing entitlements - delete values
3.Clean
4.Run
Ah, this glorious error. For me whenever I see this error I check the following things:
1. Allow XCode to access your provisioning profile info all the time - If XCode keeps asking when you start it up to have access to your computer's private files so that it can get provisioning profile information with the options to allow access always, not now, or just one time - set it to ALWAYS ALLOW access
2. If you have any old entitlement files kicking around your project get rid of them and any sign of them - if you see a .entitlements file in your project delete it (or at least remove the reference to it if you aren't sure you are ready to outright delete it), then make sure the 'Code Signing Entitlements' line under the 'Code Signing' section in Build Settings is empty
3. Check your Application Services online and match them up with your Services in XCode for the app - Go to the Apple Member Center and check the App ID for your app, click on the app to see its 'Application Services' and see what you have checked, then go to XCode and check your 'Capabilities' section to make sure the two have the same list of Apple services on both
4. Make sure you assign a valid Provisioning Profile to your app before validating - double check your provisioning profile for your app in the Apple Member Center, make sure it isn't expired, has the right App ID with the correct bundle id and distribution. Download and click on the new provisioning profile to make sure XCode has it, or go to XCode > Preferences > Accounts > click on your account and 'View Details' then click the bottom corner button to Sync all the profiles to XCode. You should have the profile available to select now in the 'Code Signing' section. Once you have the correct provisioning profile then you can set the 'Code Signing Identity' lines to the correct option for that provisioning profile.
Note - if doing a distribution certificate it can help to set all the 'Code Signing Identity' lines to the identity you use for distribution including the debug lines
5. IF ALL ELSE FAILS - Clean your project and Restart XCode and some Apple magic may just work fine the next time you open your project and try to Validate
If you're building an old 3.1.5 project, Xcode 5 has some bugs which unfortunately makes Benjamin's answer impossible, as there are no Provisioning profiles to pick from. After many a late hour of tormented reading of Xcode project files I came up with this solution that worked for me:
In the Utilities pane (to the right) in Xcode 5, under project Document, change from Xcode 3.1-compatible to Xcode 3.2 compatible.
Enter your organization name.
Close project.
Open your project file, e.g. open -a TextEdit path/to/name.xcodeproj/project.pbxproj
Remove the two Distribution clauses (isa=XCBuildConfiguration).
Remove the two accompanying lines in buildConfiguration (one in PBXNativeTarget and one in PBXProject XCConfigurationLists)
Now you're ready to re-open, archive and submit to App store - voilà! It works again!
How I think it works
I assume this works because Apple somewhere along the line decided to drop the need for any separate distribution config, which is a good thing. When I archive, Xcode automatically code signs for distribution. That's the way it should have been implemented in the first place, it's just a shame that Apple can't make auto-migration part of the IDE; instead they force us developers to spend man-decades to make this stuff work.
I have been struggling with this problem for more than a day now, trying all kinds of solutions suggested here and elsewhere on the internet. Nothing worked...
But, I finally managed to solve the problem!
The problem I had was with an old app that I haven't touched in over 3 years, and now I was about to release a long awaited update. Since the time I released the app, Apple has been updating how the certificates and App Id works. They have introduced the concept of Team Id which seems to be recommended to use.
In particular, the Apple's "Certificates, Identifiers & Profiles" site, has seen a lot of changes since then.
There I realized that the Provisioning Profile I was using for App Store Distribution were connected to the App Id ED8xxxxxxx.com.rostsolutions.* but looking at the App Id for the game I was about to submit I notice that the App Id was ATMxxxxxxx.com.rostsolutions.Swisch. So the App Id prefix did not match!
That seemed to be the root of the problem. So what I did was to create a new Provisioning Profile connected to the App Id ATMxxxxxxx.com.rostsolutions.Swisch instead. Using that Provisioning Profile I successfully submitted my app to App Store and now I just keep my fingers crossed that everything else works fine at Apple's side.
(I first tried to connect to new Provisioning profile to the wildcard Id ATMxxxxxxx.com.rostsolutions.* instead, but that didn't seem to work).
But what puzzles me is that when I look at the old App in iTunes Connects and goes to Binary Details, it says that the App Id is ED8xxxxxxx.com.rostsolutions.Swisch. So why is the "Certificates, Identifiers & Profiles" page listing the App Id as ATMxxxxxxx.com.rostsolutions.Swisch?
My problem was solved by removing my Apple ID from Preferences->Accounts and then adding it back again. Then all my provisioning profile files showed up on the View Details utility panel. I was mistakenly choosing "Mac Team Provisioning Profile:*" instead of the actual distribution provisioning profile for the project thinking that it was a generic selection. Provisioning files must be specific to the project. Oh, and BTW, make sure your provisioning profile has the correct entitlements (for example, Maps). I managed to release an app with OSX Maps without the entitlement and Apple approved it -- but no Maps showed up on the production version!
In my case, I had the same problem, my solution was to change the 'Release Provisioning Profile' in the Build Settings before doing Archive. I do this twice, once for App Store distribution, and another one for Ad Hoc distribution. I also add a comment on my archives. My conclusion is that there is something broken about the "archive re-signature".
There is a very good tutorial for solving that problem on this website.
It says that this problem can occur when your Projects Bundle Identifier is different to the one you entered on the iTunes Connect Website.
I think xcode 5 uses "release" instead of "distribution" that you may created yourself.
If all above didn't work (in my case after couple of days no luck trying everything) I have only one Mac application. BE CAREFULL WITH REVOKE!
1) Revoke by hand all "Mac App Distribution" & "Mac Installer Distribution"
2) Clean relevant certificates and open-keys in Keychain (Warning: export before delete)
3) Restart Xcode
4) Go to (in Safari) developer.apple.com -> certificates etc.
5) Create CertificateSigningRequest.certSigningRequest in Keychain->Certificate assistant
6) Create by hand on developer.apple.com both "Mac App Distribution" & "Mac Installer Distribution" with your *.certSigningRequest
7) Provisioning Profiles -> Distribution -> create/fix custom provision for AppStore (I'm specially named it as "Mac provision profile for AppStore"
8) Xcode -> Settings -> Account -> Your account -> Refresh
9) Xcode Clean -> Archive -> Validate
I have been struggling with similar problem (I was building for Ad-Hoc distribution). Only thing that has changed since last successful deploy, was adding two devices to provisioning profile.
After double- and triple- checking all build settings, I regenerated provisioning profile (without changing anything), re-downloaded and it worked fine.
So note to self: if there is no logic explanation, you can always try good old IT voodoo.
I also recommend iPhone Configuration Utility, which despite its name, is useful for checking what provisioning profiles you have on computer.
ERROR ITMS-9000: “This bundle is invalid. New apps and app updates submitted to the App Store must be built with public (GM) versions of XCode 5.1.1 or higher and iOS 7 SDK. Do not submit apps built with beta software.
If multiple developers are using the same member center account. One of them can't use a certificate created by others cause they used a certificate request created using their computers.
You need to use a certificate created by you (certificate request
created using your computer).
Alternative, told them to send you the Developer Profile. not sure of the name. to use a certificate created on another computer.
Code signing Entitlements occur because of your resource does not contain Entitlements file in resources,Just go to build setting and search code signing Entitlements delete entry for debug and release, build project again you will see there is no error. Cheers
I had the same problem, but nothing written here worked for me. However, I found a simple way that worked for me. Here's how to do it:
1) In your Project and your Target(s) build settings, choose "None" for all Provisioning profiles, and choose "Don't Code Sign" for all Code Signing Identities.
2) Now, choose your Target and go to build settings. In Code Signing Identity Release setting, choose "iOS Distribution" for "Any iOS SDK". And then, in Provisioning Profile Release setting, choose your distribution profile for "Any iOS SDK". After that your Code Signing Identity Release setting should automatically change to "iPhone Distribution".
3) Archive your build and validate. Now it should work fine. That's it!
I'm trying to submit my iOS app in Xcode6. When I click Submit or Validate in the organizer, a window pops up that says:
Failed to locate or generate matching signing assets:
Xcode attempted to locate or generate matching signing assets and
failed to do so because of the following issues:
No matching provisioning profiles found for "Applications/MyApp.app”
None of the valid provisioning profiles allowed the specified
entitlements: application-identifier, beta-reports-active,
keychain-access-groups.
I have created a distribution provisioning profile for this app in the member center and it appears in Xcode.
I've looked around and have not found anything online that has told me how to fix this. Can anyone help? Thanks.
Andy
There's a couple possibilities for your issue, but the main causes is what I got from experience as well as other SO answers.
Your certificate or profile is outdated, in which case you have to go and regenerate your profiles again. I had this problem before, but Apple has described (partially) this issue.
You haven't set your profile in the Build Settings/Code Signing area, along with the appropriate certificates. Verify your Team in General/Identity and ensure that your profile is properly set.
From Xcode 5: Code signing entitlement errors (The image is a bit outdated, but its the same as Xcode 6):
You are using a beta version of Xcode.
#jaytrixz states: "I just removed Entitlements.plist in Code Signing Entitlements under Build Settings" which could possibly work. Be sure that your provisioning profiles are configured as well.
As jaytrixz, wrote in the comments...
"I just removed Entitlements.plist in Code Signing Entitlements under Build Settings "
I did the same and it worked after an hour of trying other things!
There are a lot of answers here, some have worked for me in the past, but not this time. I'd even created a new provisioning profile but that still did not help.
Based on the "None of the valid provisioning profiles allowed the specified entitlements" part of the error I tried the following on a hunch and it worked for me:
1. add and remove a particular Capability
Go to Targets > Capabilities, and turn one on and then off.
I doubt it matters which you choose, I added "Push Notifications" (which I don't need for my app), once it was "ON", I changed it back to "OFF"
2. Archive again
I am now successfully uploading my app to the store.
Another solution, that fixed this symptom for me, can be found at: Xcode Watchkit: None of the valid provisioning profiles allowed the specified entitlements: beta-reports-active, com.apple.security.application-groups
Briefly: clear ~/Library/MobileDevice/Provisioning Profiles
If you are sure you have valid certificate and provisioning profile, then you may need to do the following:
I would suggest people to refresh the link between xCode and developer account by doing the following:
Go to Xcode -> Preferences -> Account -> View details -> (Refresh icon)
Otherwise you may not be able to see the provisioning profile as an option in the build settings (You may only see old profiles)
A lot of times it gives me connection error, you may need to retry.
Do this refresh every time you edit the provisioning profile or certificate online on apple developer member center
If certificates and build setting are all good, and you are part of multiple teams, make sure to select the proper team for the app.
Clean and archive again.
I had another cause for this problem.
I had 3 different Configurations (Debug, AdHoc, AppStore). I accidentally had the AdHoc Configuration selected in the Archive Scheme setting and tried to upload the generated archive to the AppStore.
So setting the Archive configuration to AppStore solved the problem for me.
It's the year 2017, and the provisions are still not just working. I had to put them on manual mode because automatic didn't worked after struggling half an hour. I have no idea what are those entitlements, i have no entitlements file.
After trying every possible fix in the world, I ended up just adding this to the entitlements file:
<key>beta-reports-active</key>
<true/>
Find the right entitlements file by looking in Targets > Build Settings > Code Signing > Code Signing Entitlements.
Maybe it's something to do with this Apple doc, although I couldn't follow the instructions fully as certain things were missing in XCode 7 (e.g. the refresh icon in Preferences > Accounts).
Another possible cause for this message is if you accidentally did remove the 'target inclusion checkbox' for the entitlement file – in that case the error message is slightly misleading...
In my case, the problem was caused by different Bundle Identifier in Target General tab than in Build Setttings.
If you have only development provisionning profile, just create distribution also
I played with fastlane gym, and there it gave some interesting insights:
There was an error exporting your application Unfortunately the new
Xcode export API is unstable and causes problems on some project You
can temporary use the :use_legacy_build_api option to get the build to
work again
This is the according Bug-Report. Seems to be unfixed for month.
https://openradar.appspot.com/radar?id=4952000420642816
Building the app in legacy mode worked for me.
gym --use_legacy_build_api true
Hope, this helps anyone.
In my entitlement file for Health kit there was development key. I removed that and my problem resolved.
I hope this answer could help :)
There seem to be many possible causes of this error.
In my case, my app was an Enterprise release and I was clicking "Validate" when I should have been heading straight to "Export".
I found this in the Apple docs:
Validate or Submit is not intended to be used with Development, Ad Hoc or Enterprise builds. Ad Hoc or Enterprise distributions should skip straight to Export.
Source: https://developer.apple.com/library/content/qa/qa1830/_index.html
I ran into this issue using App Groups. To resolve, I had to log into developer.apple.com and reassign the App Group ID to my App ID.
If other solutions do not work, try going to XCode -> Preferences -> Accounts -> View Details
Now look in Provisioning Profiles section. If your provisioning profile has an action button of 'Download', click the button and download. Then try again
Create a new provisioning profile
This solution worked for me when I had this problem.
Step by step :
log onto the apple developer portal and go here : https://developer.apple.com/account/ios/profile/production
Click the [+] add button and fill in a new profile name and select your app ID
Click the Download button, and once it has downloaded double click to open that file in Xcode
Re-Archive, and this time you should be able to upload succesfully to the store
The executable was signed with invalid entitlements.
The entitlements specified in your application’s Code Signing Entitlements file do not match those specified in your provisioning profile.(0xE8008016).
I am getting this error. please help me.
I have create the provisioning profile and change the bundle id. I have enable the keychain sharing from Target->Capabilities and generate the new .entitlement file. and i have also change the bundle id in that.
In my case (using XCode 10.0) nothing worked but this:
File > Project Settings... > Shared Project Settings: > Build System
--> Selected "Legacy Build System" instead of the default "New Build System (Default)".
For me in Xcode 5.1, I was getting The entitlements specified in your application’s Code Signing Entitlements file do not match those specified in your provisioning profile. when trying to test the app on my device. Device Development Certificate has to expire Feb 2015.
Issue was resolved:
Selected Target->Capabilities, under GameCenter, here I was getting error on GameCenter entitlement as it was not added to project, although first version of application was released via same XCode 5.1 but there were no errors like this before.
Below, a button was given with title Fix Issue. When clicked it added the GameCenter entitlement and issue was resolved.
After wards the screen looks like:
For me, there was nothing to do with certificate or bundle identifier. App now runs successfully on the device.
In XCode 7.3 I encountered the same question, I 've made the mistake because:
Name in (info.plist -->Bundle identifier) is not the same as (target-->build settings -->packaging-->Product bundle identifier). Just make the same, that solved the problem.
As others have pointed out, if you get this error, you need to check that the Bundle ID value in both your .plist file and also here:
First of all, you should check bundle id, provision profile and certificate with private key (.p12).
If it doesn't help. Be sure that the Code Signing Entitlements has correct value or remove it at all.
File > Workspace Settings > Build System > Legacy Build System
This worked for me.
Xcode 10.0
Reassign the value of Automatically manage signing, this works for me
In my case, the app main Target's Team was different from Tests' Target Team. Changing the Tests' Team to the same Team as main Target's solves the issue.
None of the previous answers either applied or worked for me. In my case, updating the settings of the test project, as follows, fixed it:
One possible reason for this error is: your annual subscription has been renewed. Once the subscription is renewed, all devices related to the active provision profiles will be detached.
The admin must reactivate the list of devices for the new subscribed year.
The admin must delete last year provision profiles. (all are useless).
The admin must regenerate new provision profiles for the new year with the list of devices of his choice.
After this, rebuild project with Xcode and the error will disappear.
Had this issue. My main app and extension belonged to the same app group id correctly, but there was also one more app ID not in my project that shared said app group id. I had to remove this last app ID's association with the app group.
I was having same issue on Xcode 7.3 with iPad Air 2 with iOS 9.3.4!
Then I tried many options.
Finally I deleted profile from device, changed bundle identifier in project settings, and whola!
It worked for me.
P.S. I was using free provision profile using free Apple ID.
for me, just press cmd+, then go to account ,chose your developer account refresh(XCODE6) OR download all (XCODE7) will fix.
This happened to me when I was trying to build an App-store ipa exported file on my device, I had to export ad-hoc instead.
You should check provision profile is Product or Develop, if your project use multi configuration
You should check configuration which called by schema, because it must make sure, your configuration was set provision Develop
Check your bundle identifier and your profiles. If you have a profile for a specific bundle identifier and no team ones and your bundle identifier does not match it will give you that error.
Bundle identifier is in General section of your project properties and the profiles you can check in build settings.
In my case, I had a duplicate Provisioning Profile with the same name. This was accidentally created when I added an share extension to my project, stash all of those changes with git, and created a new share extension with the same name (com.companyname.project.share-extension-name). Deleting the Provisioning Profile in the developer member center (developer.apple.com) fixed this for me.
Had this issue with a cordova / ionic3 app, was caused by forking a main app and not selected again the legacy system in project settings. I selected legacy and the entitlements bs went away.
Had the same problem, nothing was helping, but I looked in Info.plist and found out that bundle ID was changed to other name (I don't know how it happened), so when I changed it to correct one everything was fine again.
I have also this problem when I do with XCode project what is exported from cordova framework.
Resolution : You have to create Apple-ID and Provisioining-profile by yourself. Because Xcode seems to be unable to create it for you.
For me, it was an inconsistency between Debug profile (it was automatic) and Release profile (it was manual). Setting them both automatic/manual resolved the issue.
I had to delete all the provisioning profiles by following this article.