I am following this sample app : https://github.com/relayjs/relay-starter-kit
Relay.injectNetworkLayer(
new Relay.DefaultNetworkLayer('http://localhost:8080/graphql')
);
with custom url i am getting following errors
OPTIONS http://localhost:8080/graphql
net::ERR_EMPTY_RESPONSEself.fetch # relay.js:21558Promise #
app.js:3335self.fetch # relay.js:21508sendTimedRequest #
relay.js:20131module.exports # relay.js:20186tryCallTwo #
relay.js:3762doResolve # relay.js:3879Promise #
relay.js:3782fetchWithRetries # relay.js:20122_sendQuery #
relay.js:13042(anonymous function) # relay.js:12976sendQueries #
relay.js:12975sendQueries # relay.js:3502processQueue #
relay.js:17591(anonymous function) # relay.js:17582tryCallOne #
relay.js:3754(anonymous function) # relay.js:3820flush # relay.js:9457
relay.js:21558 OPTIONS http://localhost:8080/graphql
net::ERR_EMPTY_RESPONSEself.fetch # relay.js:21558Promise #
app.js:3335self.fetch # relay.js:21508sendTimedRequest #
relay.js:20131 relay.js:21558 OPTIONS http://localhost:8080/graphql
net::ERR_EMPTY_RESPONSEself.fetch # relay.js:21558Promise #
app.js:3335self.fetch # relay.js:21508sendTimedRequest #
relay.js:20131 relay.js:7449 Network request failed_markAsRejected #
relay.js:7449_handleSubtractedQueryFailure # relay.js:7430tryCallOne #
relay.js:3754(anonymous function) # relay.js:3820flush # relay.js:9457
I'm guessing that your application is running on port 3000. If you try to make client=>server requests to a different domain/port combination, without enabling such cross-origin requests on the server side, your browser will use its default CORS policies to block the request.
You can enable requests from all origins, on the server side, like this:
import cors from 'cors';
var graphQLServer = express();
graphQLServer.use(cors());
/* ... */
Check out the cors docs for more fine grained control.
Be sure to npm install --save cors, wherever your server code lives.
Related
I'm trying to get my Brother DCP-145C to work with a raspberry pi and cups/ samba. After setting up cups/ samba I exposed the print as raw. When I try to add the printer from a windows client I receive an access-denied message. Here is the log from samba:
[2021/11/18 10:41:18.869082, 0] ../auth/gensec/gensec.c:257(gensec_verify_dcerpc_auth_level)
Did not manage to negotiate mandatory feature SIGN for dcerpc auth_level 6
Do I have to change any windows security policies?
Here is my smb.conf:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
log file = /var/log/samba/%m.log
printing = CUPS
printcap = CUPS
hosts allow = 192.168.178.
# lanman auth = no
#ntlm auth = yes
# client lanman auth = no
allow dcerpc auth level connect = yes
# load printers = no
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan#informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
[homes]
comment = Home Directories
browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
# path = /var/spool/samba
path = /var/tmp/
printable = yes
guest ok = yes
read only = yes
create mask = 0700
use client driver = Yes
#[Samba_printer_name]
# path = /var/tmp/
# printable = yes
#printer name = Brother_DCP-145C
#guest ok = yes
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = yes
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, #lpadmin
You need to authenticate to print, guest access will not work.
I'm trying to build a IoT home network using MQTT but have fallen at the first hurdle. I'm going round in circies!
I'm running mosquitto on a Pi, but can't connect to it from an Arduino. I can connect from MQTT.fx running on a windows laptop though on the same LAN.
Arduino code below: I've run this with the test.mosquitto.org server address (85.119.83.194) and the local address of the Pi (192.168.1.200). Mosquitto connects but it fails to connect directly to the Pi.
Is the issue with my router??? Any suggestions really welcome!!!!
#include <SPI.h>
#include <Ethernet.h>
#include <PubSubClient.h>
// Update these with values suitable for your network.
byte mac[] = { 0xDE, 0xED, 0xBA, 0xFE, 0xFE, 0xED };
byte server[] = { 192, 168, 1, 200};
byte ip[] = { 192, 168, 1, 61 };
void callback(char* topic, byte* payload, unsigned int length) {
// handle message arrived
Serial.println("Message received");
}
EthernetClient ethClient;
PubSubClient client(server, 1883, callback, ethClient);
void setup()
{
Ethernet.begin(mac, ip);
Serial.begin(9600);
Serial.println("Ethernet Begin");
if (client.connect("arduinoClient")) {
Serial.println("Client connected");
client.subscribe("/notification/turnlighton");
}
else{
Serial.println("Client not connected");
}
}
void loop()
{
client.loop();
}
Conf file:
# Config file for mosquitto
#
# See mosquitto.conf(5) for more information.
#
# Default values are shown, uncomment to change.
#
# Use the # character to indicate a comment, but only if it is the
# very first character on the line.
# =================================================================
# General configuration
# =================================================================
# Time in seconds to wait before resending an outgoing QoS=1 or
# QoS=2 message.
#retry_interval 20
# Time in seconds between updates of the $SYS tree.
#sys_interval 10
# Time in seconds between cleaning the internal message store of
# unreferenced messages. Lower values will result in lower memory
# usage but more processor time, higher values will have the
# opposite effect.
# Setting a value of 0 means the unreferenced messages will be
# disposed of as quickly as possible.
#store_clean_interval 10
# Write process id to a file. Default is a blank string which means
# a pid file shouldn't be written.
# This should be set to /var/run/mosquitto.pid if mosquitto is
# being run automatically on boot with an init script and
# start-stop-daemon or similar.
#pid_file
# When run as root, drop privileges to this user and its primary
# group.
# Leave blank to stay as root, but this is not recommended.
# If run as a non-root user, this setting has no effect.
# Note that on Windows this has no effect and so mosquitto should
# be started by the user you wish it to run as.
#user mosquitto
# The maximum number of QoS 1 and 2 messages currently inflight per
# client.
# This includes messages that are partway through handshakes and
# those that are being retried. Defaults to 10. Set to 0 for no
# maximum. Setting to 1 will guarantee in-order delivery of QoS 1
# and 2 messages.
#max_inflight_messages 10
# The maximum number of QoS 1 and 2 messages to hold in a queue
# above those that are currently in-flight. Defaults to 100. Set
# to 0 for no maximum (not recommended).
#max_queued_messages 100
# =================================================================
# Default listener
# =================================================================
# IP address/hostname to bind the default listener to. If not
# given, the default listener will not be bound to a specific
# address and so will be accessible to all network interfaces.
# bind_address ip-address/host name
#bind_address
# Port to use for the default listener.
#port 1883
# The maximum number of client connections to allow. This is
# a per listener setting.
# Default is -1, which means unlimited connections.
# Note that other process limits mean that unlimited connections
# are not really possible. Typically the default maximum number of
# connections possible is around 1024.
#max_connections -1
# =================================================================
# Extra listeners
# =================================================================
# Listen on a port/ip address combination. By using this variable
# multiple times, mosquitto can listen on more than one port. If
# this variable is used and neither bind_address nor port given,
# then the default listener will not be started.
# The port number to listen on must be given. Optionally, an ip
# address or host name may be supplied as a second argument. In
# this case, mosquitto will attempt to bind the listener to that
# address and so restrict access to the associated network and
# interface. By default, mosquitto will listen on all interfaces.
# listener port-number [ip address/host name]
#listener
# The maximum number of client connections to allow. This is
# a per listener setting.
# Default is -1, which means unlimited connections.
# Note that other process limits mean that unlimited connections
# are not really possible. Typically the default maximum number of
# connections possible is around 1024.
#max_connections -1
# The listener can be restricted to operating within a topic hierarchy using
# the mount_point option. This is achieved be prefixing the mount_point string
# to all topics for any clients connected to this listener. This prefixing only
# happens internally to the broker; the client will not see the prefix.
#mount_point
# =================================================================
# Persistence
# =================================================================
# If persistence is enabled, save the in-memory database to disk
# every autosave_interval seconds. If set to 0, the persistence
# database will only be written when mosquitto exits.
# Note that writing of the persistence database can be forced by
# sending mosquitto a SIGUSR1 signal.
#autosave_interval 1800
# Save persistent message data to disk (true/false).
# This saves information about all messages, including
# subscriptions, currently in-flight messages and retained
# messages.
# retained_persistence is a synonym for this option.
persistence true
# The filename to use for the persistent database, not including
# the path.
#persistence_file mosquitto.db
# Location for persistent database. Must include trailing /
# Default is an empty string (current directory).
# Set to /var/lib/mosquitto/ if running as a proper service.
persistence_location /var/lib/mosquitto/
# =================================================================
# Logging
# =================================================================
# Places to log to. Use multiple log_dest lines for multiple
# logging destinations.
# Possible destinations are: stdout stderr syslog topic
# stdout and stderr log to the console on the named output.
# syslog uses the userspace syslog facility which usually ends up
# in /var/log/messages or similar.
# topic logs to the broker topic '$SYS/broker/log/<severity>',
# where severity is one of D, E, W, N, I which are debug, error,
# warning, notice and information.
# Use "log_dest none" if you wish to disable logging.
log_dest none
# Types of messages to log. Use multiple log_type lines for logging
# multiple types of messages.
# Possible types are: debug, error, warning, notice, information,
# none.
# Note that debug type messages are for decoding the incoming
# network packets.
# They are not logged in syslog.
#log_type error
#log_type warning
#log_type notice
#log_type information
# If set to true, client connection and disconnection messages will be included
# in the log.
#connection_messages true
# If set to true, add a timestamp value to each log message.
#log_timestamp true
# =================================================================
# Security
# =================================================================
# If set, only clients that have a matching prefix on their
# clientid will be allowed to connect to the broker. By default,
# all clients may connect.
# For example, setting "secure-" here would mean a client "secure-
# client" could connect but another with clientid "mqtt" couldn't.
#clientid_prefixes
# Boolean value that determines whether clients that connect
# without providing a username are allowed to connect. If set to
# false then a password file should be created (see the
# password_file option) to control authenticated client access.
# Defaults to true.
#allow_anonymous true
# Control access to the broker using a password file. The file is a
# text file # of lines in the format:
# username:password
# The password (and colon) may be omitted if desired, although this
# offers very little in the way of security.
#password_file
# Control access to topics on the broker using an access control list
# file. If this parameter is defined then only the topics listed will
# have access.
# Topic access is added with lines of the format:
#
# topic [read|write] <topic>
#
# The access type is controlled using "read" or "write". This parameter
# is optional - if not given then the access is read/write.
# <topic> can contain the + or # wildcards as in subscriptions.
#
# The first set of topics are applied to anonymous clients, assuming
# allow_anonymous is true. User specific topic ACLs are added after a
# user line as follows:
#
# user <username>
#
# The username referred to here is the same as in password_file. It is
# not the clientid.
#
#
# If is also possible to define ACLs based on pattern substitution within the
# topic. The patterns available for substition are:
#
# %c to match the client id of the client
# %u to match the username of the client
#
# The substitution pattern must be the only text for that level of hierarchy.
#
# The form is the same as for the topic keyword, but using pattern as the
# keyword.
# Pattern ACLs apply to all users even if the "user" keyword has previously
# been given.
#
# pattern [read|write] <topic>
#
# Example:
#
# pattern write sensor/%u/data
#
#acl_file
# =================================================================
# Bridges
# =================================================================
# Experimental support for connecting multiple MQTT brokers
# together.
# Specify multiple sets of connection, address and topic
# configurations.
# Each connection must have a unique name.
# Only a single address per configuration is currently supported,
# unlike in rsmb.
# The direction that the topic will be shared can be chosen by
# specifying out, in or both, where the default value is out.
# The QoS level of the bridged communication can be specified with the final
# topic option. The default QoS level is 2, to change the QoS the topic
# direction must also be given.
# Multiple topics can be specified per connection, but be careful
# not to create any loops.
#connection <name>
#address <host>[:<port>]
#topic <topic> [[out | in | both] qos-level]
# Set the client id for this bridge connection. If not defined,
# this defaults to 'name.hostname' where name is the connection
# name and hostname is the hostname of this computer.
#clientid
# Set the clean session variable for this bridge.
# When set to true, when the bridge disconnects for any reason, all
# messages and subscriptions will be cleaned up on the remote
# broker. Note that with cleansession set to true, there may be a
# significant amount of retained messages sent when the bridge
# reconnects after losing its connection.
# When set to false, the subscriptions and messages are kept on the
# remote broker, and delivered when the bridge reconnects.
#cleansession false
# If set to true, publish notification messages to the local and remote brokers
# giving information about the state of the bridge connection. Retained
# messages are published to the topic $SYS/bridge/connection/<clientid>/state.
# If the message is 1 then the connection is active, or 0 if the connection has
# failed.
#notifications true
# Set the keepalive interval for this bridge connection, in
# seconds.
#keepalive_interval 60
# Set the start type of the bridge. This controls how the bridge starts and
# can be one of three types: automatic, lazy and once. Note that RSMB provides
# a fourth start type "manual" which isn't currently supported by mosquitto.
#
# "automatic" is the default start type and means that the bridge connection
# will be started automatically when the broker starts and also restarted
# after a short delay (30 seconds) if the connection fails.
#
# Bridges using the "lazy" start type will be started automatically when the
# number of queued messages exceeds the number set with the "threshold"
# parameter. It will be stopped automatically after the time set by the
# "idle_timeout" parameter. Use this start type if you wish the connection to
# only be active when it is needed.
#
# A bridge using the "once" start type will be started automatically when the
# broker starts but will not be restarted if the connection fails.
#start_type automatic
# Set the amount of time a bridge using the lazy start type must be idle before
# it will be stopped. Defaults to 60 seconds.
#idle_timeout 60
# Set the number of messages that need to be queued for a bridge with lazy
# start type to be restarted. Defaults to 10 messages.
# Must be less than max_queued_messages.
#threshold 10
# Set the username to use when connecting to an MQTT v3.1 broker
# that requires authentication.
#username
# Set the password to use when connecting to an MQTT v3.1 broker
# that requires authentication. This option is only used if
# username is also set.
#password
# =================================================================
# External security checks
# =================================================================
# This section defines options for potential use with external
# databases.
# They are intended to make it easier to add external security
# checks along with WITH_EXT_SECURITY_CHECKS. If you haven't written
# code to support another database and compiled support in, you are
# unlikely to need to change anything here.
# Database hostname.
#db_host
# Database port.
#db_port
# Database name.
#db_name
# Database username.
#db_username
# Database password.
#db_password
# =================================================================
# Unsupported rsmb options - for the future
# =================================================================
#autosave_on_changes
#addresses
#notification_topic
#round_robin
# =================================================================
# rsmb options - unlikely to ever be supported
# =================================================================
#ffdc_output
#max_log_entries
#trace_level
#trace_output
#try_private
I'm new here.
I have a strange error with gitlab CE (Docker) behind a reverse proxy (Docker/nginx-letsencrypt by jwilder), the same Docker Image runs without any error when the image ports 80 & 443 are mapped directly to the hosts ports. The http call to the web-ide is functional. The same image behind the proxy, where VIRTUAL_PORT=80 is set for gitlab, and 443 + 80 exposed via proxy). Everything works as expected just the web-ide does not load.
Don't understand why gitlab web ide without proxy ssl works with unsecure http? Running gitlab with http only is not an option ;-)
The error output from Chrome:
vue-resource.esm.js:1086 Mixed Content: The page at 'https://lab.flockcode.com/-/ide/project/flockcode/flockcode_homepage/edit/master/.gitlab-ci.yml' was loaded over HTTPS, but requested an insecure XMLHttpRequest endpoint 'http://lab.flockcode.com/flockcode/flockcode_homepage/files/master?format=json'. This request has been blocked; the content must be served over HTTPS.
(anonymous) # vue-resource.esm.js:1086
r # vue-resource.esm.js:196
X # vue-resource.esm.js:1032
Q # vue-resource.esm.js:1190
c # vue-resource.esm.js:1147
l # vue-resource.esm.js:1173
V # vue-resource.esm.js:990
c # vue-resource.esm.js:1147
l # vue-resource.esm.js:1173
K # vue-resource.esm.js:1004
c # vue-resource.esm.js:1147
l # vue-resource.esm.js:1173
z # vue-resource.esm.js:977
c # vue-resource.esm.js:1147
l # vue-resource.esm.js:1173
U # vue-resource.esm.js:880
c # vue-resource.esm.js:1147
l # vue-resource.esm.js:1173
H # vue-resource.esm.js:865
c # vue-resource.esm.js:1147
l # vue-resource.esm.js:1173
G # vue-resource.esm.js:1024
c # vue-resource.esm.js:1147
l # vue-resource.esm.js:1173
q # vue-resource.esm.js:846
c # vue-resource.esm.js:1147
l # vue-resource.esm.js:1173
(anonymous) # vue_resource_interceptor.js:13
c # vue-resource.esm.js:1147
l # vue-resource.esm.js:1173
(anonymous) # vue_resource_interceptor.js:24
c # vue-resource.esm.js:1147
(anonymous) # vue-resource.esm.js:1176
r # vue-resource.esm.js:196
t # vue-resource.esm.js:1140
oe # vue-resource.esm.js:1397
oe.(anonymous function) # vue-resource.esm.js:1428
getFiles # index.js:72
(anonymous) # tree.js:59
Rn # tree.js:53
(anonymous) # vuex.esm.js:704
P.dispatch # vuex.esm.js:426
P.dispatch # vuex.esm.js:332
(anonymous) # ide_router.js:72
Promise.then (async)
(anonymous) # ide_router.js:62
p # vue-router.esm.js:1943
r # vue-router.esm.js:1717
ue # vue-router.esm.js:1725
nn.confirmTransition # vue-router.esm.js:1972
nn.transitionTo # vue-router.esm.js:1874
sn.init # vue-router.esm.js:2494
beforeCreate # vue-router.esm.js:540
Re # vue.esm.js:2895
e._init # vue.esm.js:4556
At # vue.esm.js:4659
(anonymous) # index.js:10
./ide/index.js # index.js:22
r # bootstrap cc923a667f9c8788713a:54
window.webpackJsonp # bootstrap cc923a667f9c8788713a:25
(anonymous) # ide.436113d38b71e60d098b.bundle.js:1
.gitlab-ci.yml:1 Uncaught (in promise) je {url: "http://lab.flockcode.com/flockcode/flockcode_homepage/files/master?format=json", ok: false, status: 0, statusText: "", headers: {…}, …}
As I dont know where to start and I tried all sorts of /etc/gitlab/gitlab.rb settings (including uncomment the X header section with no effect)a and the container needs quite a while to restart I'm asking kindly for help. thx in advance.
Maybe same problem with me.
Reverse Proxy (nginx)
w/ Letsencrypt certificate
Gitlab-ce docker container
At first, I've set external_url with 'HTTP'
then All are ok except Web IDE
https://docs.gitlab.com/omnibus/settings/nginx.html#supporting-proxied-ssl
By default NGINX will auto-detect whether to use SSL if external_url contains https://. If you are running GitLab behind a reverse proxy, you may wish to terminate SSL at another proxy server or load balancer. To do this, be sure the external_url contains https:// and apply the following configuration to gitlab.rb:
So, I changed http -> https in external_url, and 'listen_https' to false
external_url 'https://gitlab.example.com'
nginx['listen_https'] = false
Then all are OK to me.
May help to you
http://blog.hangadac.com
Neo4J browser with Bolt protocol does not work on my server.
Here is the error I get in the browser (Chrome):
VM608:35 WebSocket connection to 'ws://<server_name>:7687/' failed: Error during WebSocket handshake: net::ERR_CONNECTION_RESET
WrappedWebSocket # VM608:35
l # 8eea4b31.components.js:61
c # 8eea4b31.components.js:61
value # 8eea4b31.components.js:60
value # 8eea4b31.components.js:61
value # 8eea4b31.components.js:60
value # 8eea4b31.components.js:60
testConnection # 248a7ab3.scripts.js:10
makeRequest # 248a7ab3.scripts.js:11
AuthService.makeRequest # 248a7ab3.scripts.js:5
AuthService.authenticate # 248a7ab3.scripts.js:5
(anonymous) # 248a7ab3.scripts.js:9
$scope.authenticate # 248a7ab3.scripts.js:5
(anonymous) # 8eea4b31.components.js:13
callback # 8eea4b31.components.js:13
$eval # 8eea4b31.components.js:11
$apply # 8eea4b31.components.js:11
(anonymous) # 8eea4b31.components.js:13
dispatch # 8eea4b31.components.js:3
elemData.handle # 8eea4b31.components.js:3
And here is the error in Neo4J logs on the server:
2017-05-23 16:43:11.130+0000 WARN [io.netty.channel.DefaultChannelPipeline] An exceptionCaught() event was fired, and it reached at the tail of the pipeline. It usually means the last handler in the pipeline did not handle the exception. Connection reset by peer
java.io.IOException: Connection reset by peer
at sun.nio.ch.FileDispatcherImpl.read0(Native Method)
at sun.nio.ch.SocketDispatcher.read(SocketDispatcher.java:39)
at sun.nio.ch.IOUtil.readIntoNativeBuffer(IOUtil.java:223)
at sun.nio.ch.IOUtil.read(IOUtil.java:192)
at sun.nio.ch.SocketChannelImpl.read(SocketChannelImpl.java:380)
at io.netty.buffer.PooledUnsafeDirectByteBuf.setBytes(PooledUnsafeDirectByteBuf.java:288)
at io.netty.buffer.AbstractByteBuf.writeBytes(AbstractByteBuf.java:1100)
at io.netty.channel.socket.nio.NioSocketChannel.doReadBytes(NioSocketChannel.java:366)
at io.netty.channel.nio.AbstractNioByteChannel$NioByteUnsafe.read(AbstractNioByteChannel.java:118)
at io.netty.channel.nio.NioEventLoop.processSelectedKey(NioEventLoop.java:651)
at io.netty.channel.nio.NioEventLoop.processSelectedKeysOptimized(NioEventLoop.java:574)
at io.netty.channel.nio.NioEventLoop.processSelectedKeys(NioEventLoop.java:488)
at io.netty.channel.nio.NioEventLoop.run(NioEventLoop.java:450)
at io.netty.util.concurrent.SingleThreadEventExecutor$5.run(SingleThreadEventExecutor.java:873)
at java.lang.Thread.run(Thread.java:745)
I tried to search for this error but didn't find a solution.
Following is the network part of Neo4J configuration:
#*****************************************************************
# Network connector configuration
#*****************************************************************
# With default configuration Neo4j only accepts local connections.
# To accept non-local connections, uncomment this line:
dbms.connectors.default_listen_address=0.0.0.0
# You can also choose a specific network interface, and configure a non-default
# port for each connector, by setting their individual listen_address.
# The address at which this server can be reached by its clients. This may be the server's IP address or DNS name, or
# it may be the address of a reverse proxy which sits in front of the server. This setting may be overridden for
# individual connectors below.
#dbms.connectors.default_advertised_address=localhost
# You can also choose a specific advertised hostname or IP address, and
# configure an advertised port for each connector, by setting their
# individual advertised_address.
# Bolt connector
dbms.connector.bolt.enabled=true
#dbms.connector.bolt.tls_level=OPTIONAL
dbms.connector.bolt.listen_address=:7687
# HTTP Connector. There must be exactly one HTTP connector.
dbms.connector.http.enabled=true
#dbms.connector.http.listen_address=:7474
# HTTPS Connector. There can be zero or one HTTPS connectors.
dbms.connector.https.enabled=true
#dbms.connector.https.listen_address=:7473
# Number of Neo4j worker threads.
#dbms.threads.worker_count=
I made Neo4J accessible from outside by telling it to listen on 0.0.0.0.
I used telnet <server_name> 7687 to check the port was opened and it is.
If I disable Bolt it is working fine.
Does someone has an idea about what is going wrong?
I have been having issues trying to deploy with rubber
in the Terminal
rubber vulcanize complete_passenger_postgresql
and in my rubber.yml
# REQUIRED: The name of your application
app_name: app-name
# REQUIRED: The system user to run your app servers as
app_user: app
# REQUIRED: Notification emails (e.g. monit) get sent to this address
#
admin_email: "root##{full_host}"
# OPTIONAL: If not set, you won't be able to access web_tools
# server (graphite, graylog, monit status, haproxy status, etc)
# web_tools_user: admin
# web_tools_password: sekret
# REQUIRED: The timezone the server should be in
timezone: US/Eastern
# REQUIRED: the domain all the instances should be associated with
#
domain: foo.com
# OPTIONAL: See rubber-dns.yml for dns configuration
# This lets rubber update a dynamic dns service with the instance alias
# and ip when they are created. It also allows setting up arbitrary
# dns records (CNAME, MX, Round Robin DNS, etc)
# OPTIONAL: Additional rubber file to pull config from if it exists. This file will
# also be pushed to remote host at Rubber.root/config/rubber/rubber-secret.yml
#
rubber_secret: "#{File.expand_path('~') + '/.ec2' + (Rubber.env == 'production' ? '' : '_dev') + '/rubber-secret.yml' rescue 'rubber-secret.yml'}"
# OPTIONAL: Encryption key that was used to obfuscate the contents of rubber-secret.yml with "rubber util:obfuscation"
# Not that much better when stored in here, but you could use a ruby snippet in here to fetch it from a key server or something
#
# rubber_secret_key: "XXXyyy=="
# REQUIRED All known cloud providers with the settings needed to configure them
# There's only one working cloud provider right now - Amazon Web Services
# To implement another, clone lib/rubber/cloud/aws.rb or make the fog provider
# work in a generic fashion
#
cloud_providers:
aws:
# REQUIRED The AWS region that you want to use.
#
# Options include
# ap-northeast-1 # Asia Pacific (Tokyo) Region
# ap-southeast-1 # Asia Pacific (Singapore) Region
# ap-southeast-2 # Asia Pacific (Sydney) Region
# eu-west-1 # EU (Ireland) Region
# sa-east-1 # South America (Sao Paulo) Region
# us-east-1 # US East (Northern Virginia) Region
# us-west-1 # US West (Northern California) Region
# us-west-2 # US West (Oregon) Region
#
region: us-east-1
# REQUIRED The amazon keys and account ID (digits only, no dashes) used to access the AWS API
#
access_key: XXX
secret_access_key: YYY
account: ZZZ #entered in
# REQUIRED: The name of the amazon keypair and location of its private key
#
# NOTE: for some reason Capistrano requires you to have both the public and
# the private key in the same folder, the public key should have the
# extension ".pub". The easiest way to get your hand on this is to create the
# public key from the private key: ssh-keygen -y -f gsg-keypair > gsg-keypair.pub
#
key_name: guy
key_file: "#{Dir[(File.expand_path('~') rescue '/root') + '/.ec2/*' + cloud_providers.aws.key_name].first}"
# OPTIONAL: Needed for bundling a running instance using rubber:bundle
#
# pk_file: "#{Dir[(File.expand_path('~') rescue '/root') + '/.ec2/pk-*'].first}"
# cert_file: "#{Dir[(File.expand_path('~') rescue '/root') + '/.ec2/cert-*'].first}"
# image_bucket: "#{app_name}-images"
# OPTIONAL: Needed for backing up database to s3
# backup_bucket: "#{app_name}-backups"
# REQUIRED: the ami and instance type for creating instances
# The Ubuntu images at http://alestic.com/ work well
# Ubuntu 14.04.1 Trusty instance-store 64-bit: ami-92f569fa
#
# m1.small or m1.large or m1.xlarge
image_type: m3.medium
image_id: ami-1ecae776
# OPTIONAL: Provide fog-specific options directly. This should only be used if you need a special setting that
# Rubber does not directly expose. Since these settings will be passed directly through to fog, we can't make any
# guarantee about how they work (if fog renames an attribute, e.g., your config will break). Please see the fog
# source code for the option names.
# fog_options:
# EBS I/O optimized instance
# EBS-optimized instances deliver dedicated throughput between Amazon EC2 and Amazon EBS, with options
# between 500 Mbps and 1000 Mbps depending on the instance type used.
# Read more and make sure that your image_type supports ebs_optimized function at: http://aws.amazon.com/ec2/instance-types/
# ebs_optimized: false
# OPTIONAL: EC2 spot instance request support.
#
# Enables the creation of spot instance requests. Rubber will wait synchronously until the request is fulfilled,
# at which point it will begin initializing the instance, unless spot_instance_request_timeout is set.
# spot_instance: true
#
# The maximum price you would like to pay for your spot instance.
# spot_price: "0.085"
#
# If a spot instance request can't be fulfilled in 3 minutes, fallback to on-demand instance creation. If not set,
# the default is infinite.
# spot_instance_request_timeout: 180
# digital_ocean:
# REQUIRED: The Digital Ocean region that you want to use.
#
# Options include
# New York 1
# Amsterdam 1
# San Francisco 1
# New York 2
# Amsterdam 2
# Singapore 1
#
# These change often. Check https://www.digitalocean.com/droplets/new for the most up to date options.
# Default to New York 2 since this is the only region that currently supports private networking
# region: New York 2
# REQUIRED: The image name and type for creating instances.
# image_id: Ubuntu 14.04 x64
# image_type: 512MB
# Optionally enable private networking for your instances.
# This is currently only supported in New York 2.
# private_networking: true
# Use an alternate cloud provider supported by fog. This doesn't fully work
# yet due to differences in providers within fog, but gives you a starting
# point for contributing a new provider to rubber. See rubber/lib/rubber/cloud(.rb)
# fog:
# credentials:
# provider: rackspace
# rackspace_api_key: 'XXX'
# rackspace_username: 'YYY'
# image_type: 123
# image_id: 123
# REQUIRED the cloud provider to use
#
cloud_provider: aws
# OPTIONAL: Where to store instance data.
#
# Allowed forms are:
# filesystem: "file:#{Rubber.root}/config/rubber/instance-#{Rubber.env}.yml"
# cloud storage (s3): "storage:#{cloud_providers.aws.backup_bucket}/RubberInstances_#{app_name}/instance-#{Rubber.env}.yml"
# cloud table (simpledb): "table:RubberInstances_#{app_name}_#{Rubber.env}"
#
# If you need to port between forms, load the rails console then:
# Rubber.instances.save(location)
# where location is one of the allowed forms for this variable
#
# instance_storage: "file:#{Rubber.root}/config/rubber/instance-#{Rubber.env}.yml"
# OPTIONAL: Where to store a backup of the instance data
#
# This is most useful when using a remote store in case you end up
# wiping the single copy of your instance data. When using the file
# store, the instance file is typically under version control with
# your project code, so that provides some safety.
#
# instance_storage_backup: "storage:#{cloud_providers.aws.backup_bucket}/RubberInstances_#{app_name}/instance-#{Rubber.env}-#{Time.now.strftime('%Y%m%d-%H%M%S')}.yml"
# OPTIONAL: Default ports for security groups
web_port: 80
web_ssl_port: 443
web_tools_port: 8080
web_tools_ssl_port: 8443
# OPTIONAL: Define security groups
# Each security group is a name associated with a sequence of maps where the
# keys are the parameters to the ec2 AuthorizeSecurityGroupIngress API
# source_security_group_name, source_security_group_owner_id
# ip_protocol, from_port, to_port, cidr_ip
# If you want to use a source_group outside of this project, add "external_group: true"
# to prevent group_isolation from mangling its name, e.g. to give access to graphite
# server to other projects
#
# security_groups:
# graphite_server:
# description: The graphite_server security group to allow projects to send graphite data
# rules:
# - source_group_name: yourappname_production_collectd
# source_group_account: 123456
# external_group: true
# protocol: tcp
# from_port: "#{graphite_server_port}"
# to_port: "#{graphite_server_port}"
#
security_groups:
default:
description: The default security group
rules:
- source_group_name: default
source_group_account: "#{cloud_providers.aws.account}"
- protocol: tcp
from_port: 22
to_port: 22
source_ips: [0.0.0.0/0]
web:
description: "To open up port #{web_port}/#{web_ssl_port} for http server on web role"
rules:
- protocol: tcp
from_port: "#{web_port}"
to_port: "#{web_port}"
source_ips: [0.0.0.0/0]
- protocol: tcp
from_port: "#{web_ssl_port}"
to_port: "#{web_ssl_port}"
source_ips: [0.0.0.0/0]
web_tools:
description: "To open up port #{web_tools_port}/#{web_tools_ssl_port} for internal/tools http server"
rules:
- protocol: tcp
from_port: "#{web_tools_port}"
to_port: "#{web_tools_port}"
source_ips: [0.0.0.0/0]
- protocol: tcp
from_port: "#{web_tools_ssl_port}"
to_port: "#{web_tools_ssl_port}"
source_ips: [0.0.0.0/0]
# OPTIONAL: The default security groups to create instances with
assigned_security_groups: [default]
roles:
web:
assigned_security_groups: [web]
web_tools:
assigned_security_groups: [web_tools]
# OPTIONAL: Automatically create security groups for each host and role
# EC2 Classic doesn't allow one to change what groups an instance belongs to after
# creation, so it's good to have some empty ones predefined. EC2 with VPC, however,
# does allow changing security groups after instance creation and allows far fewer
# security groups per instance, so you shouldn't enable this setting if using VPC.
auto_security_groups: false
# OPTIONAL: Automatically isolate security groups for each appname/environment
# by mangling their names to be appname_env_groupname
# This makes it safer to have staging and production coexist on the same EC2
# account, or even multiple apps. NB: due to the security group limits per instance
# in EC2 with VPCs, this option should only be enabled if you're using EC2 Classic.
isolate_security_groups: false
# OPTIONAL: Prompts one to sync security group rules when the ones in amazon
# differ from those in rubber
prompt_for_security_group_sync: false
# OPTIONAL: A list of CIDR address blocks that represent private networks for your cluster.
# Set this to open up wide access to hosts in your network. Consequently, setting the CIDR block
# to anything other than a private, unroutable block would be a massive security hole.
private_networks: [10.0.0.0/8]
# OPTIONAL: The packages to install on all instances
# You can install a specific version of a package by using a sub-array of pkg, version
# For example, packages: [[rake, 0.7.1], irb]
packages: [postfix, build-essential, git-core, libxslt-dev, ntp]
# OPTIONAL: The package manager mirror to use for installation of primary packages (i.e., those not explicitly
# sourced from a different repository). If not specified, whatever mirror configured by your server image
# will be used.
#
# Note that Ubuntu has a special URL that can be used to auto-select the mirror based upon geoip. To use
# it, specify 'mirror://mirrors.ubuntu.com/mirrors.txt' as the value.
# package_manager_mirror: 'mirror://mirrors.ubuntu.com/mirrors.txt'
# OPTIONAL: The command used to identify your particular OS version. This will be used for configurations
# in Rubber templates that are parameterized by OS version (e.g., package lists). If not specified, Ubuntu
# will be assumed.
os_version_cmd: 'lsb_release -sr'
# OPTIONAL: gem sources to setup for rubygems
# gemsources: ["https://rubygems.org"]
# OPTIONAL: The gems to install on all instances
# You can install a specific version of a gem by using a sub-array of gem, version
# For example, gem: [[rails, 2.2.2], open4, aws-s3]
gems: [open4, aws-s3, bundler, [rubber, "#{Rubber.version}"]]
# OPTIONAL: A string prepended to shell command strings that cause multi
# statement shell commands to fail fast. You may need to comment this out
# on some platforms, but it works for me on linux/osx with a bash shell
#
stop_on_error_cmd: "function error_exit { exit 99; }; trap error_exit ERR"
# OPTIONAL: The default set of roles to use when creating a staging instance
# with "cap rubber:create_staging". By default this uses all the known roles,
# excluding slave roles, but this is not always desired for staging, so you can
# specify a different set here
#
# staging_roles: "web,app,db:primary=true"
# Auto detect staging roles
staging_roles: "#{known_roles.reject {|r| r =~ /slave/ || r =~ /^db$/ }.join(',')}"
# OPTIONAL: Lets one assign amazon elastic IPs (static IPs) to your instances
# You should typically set this on the role/host level rather than
# globally , unless you really do want all instances to have a
# static IP
#
# use_static_ip: true
# OPTIONAL: Specifies an instance to be created in the given availability zone
# Availability zones are sepcified by amazon to be somewhat isolated
# from each other so that hardware failures in one zone shouldn't
# affect instances in another. As such, it is good to specify these
# for instances that need to be redundant to reduce your chance of
# downtime. You should typically set this on the role/host level
# rather than globally. Use cap rubber:describe_zones to see the list
# of zones
# availability_zone: us-east-1a
# OPTIONAL: If you want to use Elastic Block Store (EBS) persistent
# volumes, add them to host specific overrides and they will get created
# and assigned to the instance. On initial creation, the volume will get
# attached _and_ formatted, but if your host disappears and you recreate
# it, the volume will only get remounted thereby preserving your data
#
# hosts:
# production15:
# availability_zone: us-east-1b
# volumes:
# - size: 100 # size of vol in GBs
# zone: us-east-1b # zone to create volume in, needs to match host's zone
# device: /dev/sdh # OS device to attach volume to
# mount: /mnt/postgresql # The directory to mount this volume to
# filesystem: ext4 # the filesystem to create on volume
#
# # OPTIONAL: Provide fog-specific options directly. This should only be used if you need a special setting that
# # Rubber does not directly expose. Since these settings will be passed directly through to fog, we can't make any
# # guarantee about how they work (if fog renames an attribute, e.g., your config will break). Please see the fog
# # source code for the option names.
# fog_options:
# type: gp2 # type of volume, standard (EBS magnetic), io1 (provisioned IOPS - SSD), or gp2 (general purpose - SSD).
# iops: 500 # The number of I/O operations per second (IOPS) that the volume supports.
# # Required when the volume type is io1; not used with non-provisioned IOPS volumes.
# - size: 10
# zone: us-east-1a
# device: /dev/sdi
# mount: /mnt/logs
# filesystem: ext4
# fog_options:
# type: io1
# iops: 500
#
# # volumes without mount/filesystem can be used in raid arrays
#
# - size: 50
# zone: us-east-1a
# device: /dev/sdx
# fog_options:
# type: gp2
# iops: 500
# - size: 50
# zone: us-east-1a
# device: /dev/sdy
# fog_options:
# type: gp2
# iops: 500
#
# # Use some ephemeral volumes for raid array
# local_volumes:
# - partition_device: /dev/sdb
# zero: false # zeros out disk for improved performance
# - partition_device: /dev/sdc
# zero: false # zeros out disk for improved performance
#
# # for raid array, you'll need to add mdadm to packages. Likewise,
# # xfsprogs is needed for xfs filesystem support
# #
# packages: [xfsprogs, mdadm]
# raid_volumes:
# - device: /dev/md0 # OS device to to create raid array on
# mount: /mnt/fast # The directory to mount this array to
# mount_opts: 'nobootwait' # Recent Ubuntu versions require this flag or SSH will not start on reboot
# filesystem: xfs # the filesystem to create on array
# filesystem_opts: -f # the filesystem opts in mkfs
# raid_level: 0 # the raid level to use for the array
# # if you're using Ubuntu 11.x or later (Natty, Oneiric, Precise, etc)
# # you will want to specify the source devices in their /dev/xvd format
# # see https://bugs.launchpad.net/ubuntu/+source/linux/+bug/684875 for
# # more information.
# # NOTE: Only make this change for raid source_devices, NOT generic
# # volume commands above.
# source_devices: [/dev/sdx, /dev/sdy] # the source EBS devices we are creating raid array from (Ubuntu Lucid or older)
# source_devices: [/dev/xvdx, /dev/xvdy] # the source EBS devices we are creating raid array from (Ubuntu Natty or newer)
#
# # for LVM volumes, you'll need to add lvm2 to packages. Likewise,
# # xfsprogs is needed for xfs filesystem support
# packages: [xfsprogs, lvm2]
# lvm_volume_groups:
# - name: vg # The volume group name
# physical_volumes: [/dev/sdx, /dev/sdy] # Devices used for LVM group (you can use just one, but you can't stripe then)
# extent_size: 32 # Size of the volume extent in MB
# volumes:
# - name: lv # Name of the logical volume
# size: 999.9 # Size of volume in GB (slightly less than sum of all physical volumes because LVM reserves some space)
# stripes: 2 # Count of stripes for volume
# filesystem: xfs # The filesystem to create on the logical volume
# filesystem_opts: -f # the filesystem opts in mkfs
# mount: /mnt/large_work_dir # The directory to mount this LVM volume to
# OPTIONAL: You can also define your own variables here for use when
# transforming config files, and they will be available in your config
# templates as <%%= rubber_env.var_name %>
#
# var_name: var_value
# All variables can also be overridden on the role, environment and/or host level by creating
# a sub level to the config under roles, environments and hosts. The precedence is host, environment, role
# e.g. to install mysql only on db role, and awstats only on web01:
# OPTIONAL: Role specific overrides
# roles:
# somerole:
# packages: []
# somerole2:
# myconfig: someval
# OPTIONAL: Environment specific overrides
# environments:
# staging:
# myconfig: otherval
# production:
# myconfig: val
# OPTIONAL: Host specific overrides
# hosts:
# somehost:
# packages: []
And doing a
cap rubber:create
I get the error after:
* executing `rubber:setup_local_aliases'
/home/casekey/.rvm/gems/ruby-2.1.1/gems/rubber-2.16.0/lib/rubber/recipes/rubber/setup.rb:192:in `block (3 levels) in load': no implicit conversion of nil into String (TypeError)
setup.rb at line at 192:
local_hosts << ic.external_ip << ' ' << hosts_data.compact.join(' ') << "\n"
After attempting to debug this with binding.pry, the line 192 goes through without any error.
Any ideas are welcome.
I have also tried:
bundle exec rake rails:update:bin
as per Rails 4 Error with every command "`load': no implicit conversion of nil into String" (Mac OS X 10.9)