I'm trying to create a table in Latex but without success. I tried different solutions but no one solves my problem.
I would like create a table like the picture below:
Can anyone show how to do this in Latex please?
One first sketch may be the following:
\documentclass{article}
\usepackage{multirow}
\begin{document}
\begin{tabular}{|c|c|c|c|c|c|}
\hline
\multirow{3}{*}{A} & \multicolumn{2}{c|}{User B} & %
\multicolumn{2}{c|}{User C} & \multirow{3}{*}{D}\\
\cline{2-5}
& \multicolumn{2}{c|}{Value} & \multicolumn{2}{c|}{Value} & \\
\cline{2-5}
& B1 & B2 & C1 & C2 & \\
\hline
& & & & & \\
\hline
& & & & & \\
\hline
% etc. ...
\end{tabular}
\end{document}
It produces:
Addendum:
\documentclass{article}
\usepackage{multirow}
\begin{document}
{\sffamily %
\begin{tabular}{|c|c|c|c|c|c|c|}% seven columns now, not six...
\hline
\multirow{3}{*}{A} & \multicolumn{2}{c|}{User B} & \multirow{3}{*}{X} & %
\multicolumn{2}{c|}{User C} & \multirow{3}{*}{D}\\
\cline{2-3}\cline{5-6}
& \multicolumn{2}{c|}{Value} & & \multicolumn{2}{c|}{Value} & \\
\cline{2-3}\cline{5-6}
& B1 & B2 & & C1 & C2 & \\
\hline
& & & & & & \\
\hline
& & & & & & \\
\hline
% etc. ...
\end{tabular}
}%
\end{document}
produces:
Please, critically check all the differences between the original code and this latter.
Don't forget that several LaTeX packages can help you improving style, dimensions and spacing of your table: among these, I advise you to have a look at bigstrut.
Also:
\documentclass{article}
\usepackage{multirow}
\begin{document}
\begin{tabular}{|c|c|c|c|c|c|c|}
\hline
\multirow{3}{*}{A} & \multirow{3}{*}{X} & \multicolumn{2}{c|}{User B} & \multicolumn{2}{c|}{User C} & \multirow{3}{*}{D}\\
\cline{3-6}
& & \multicolumn{2}{c|}{Value} & \multicolumn{2}{c|}{Value} & \\
\cline{3-6}
& & B1 & B2 & C1 & C2 & \\
\hline
& & & & & & \\
\hline
\end{tabular}
\end{document}
You should now be able to operate on your own further changes to the model of table.
Check out the multirow package:
http://texblog.org/2012/12/21/multi-column-and-multi-row-cells-in-latex-tables/
You have to include the library:
%multi-column
\multicolumn{number cols}{align}{text} % align: l,c,r
%multi-row
\usepackage{multirow}
\multirow{number rows}{width}{text}
Then it looks like this:
\documentclass[11pt]{article}
\usepackage{multirow}
\begin{document}
\begin{table}[ht]
\caption{Multi-column and multi-row table}
\begin{center}
\begin{tabular}{ccc}
\hline
\multicolumn{2}{c}{\multirow{2}{*}{Multi-col-row}}&X\\
\multicolumn{2}{c}{}&X\\
\hline
X&X&X\\
\hline
\end{tabular}
\end{center}
\label{tab:multicol}
\end{table}
\end{document}
note: code examples from the link provided
Related
How can I align this table. It does not algin column two and three at center.
I am using following code:
\begin{table}[htbp]
\caption{Comparison with the hybrid architecture}
\label{tab:comparison}
\begin{center}
\begin{tabular}{|l|c|c|}
\hline
\multicolumn{1}{|c|}{} & \multicolumn{2}{c|}{\textit{Average Episode Reward for 10 Runs (deviation)}} \\ \cline{2-3}
\multicolumn{1}{|c|}{} & \multicolumn{2}{c|}{\textit{Disturbance Magnitude}} \\
\cline{2-3}
\multicolumn{1}{|c|}{\multirow{-3}{*}{\textit{Architecture}}}
& 65\% & 70\% \\ \hline
PID & -17.71 & -23.54 \\
CoL-DRL & -2.58 & -12.25 \\
\rowcolor[HTML]{9AFF99} CoL-DRPRL & -1.85 & -6.25 \\ \hline
\end{tabular}
\end{center}
\end{table}
When I insert my table into latex I get an overfull /hbox error and cannot figure out how to change the width without changing the structure of my table. The code of my table follows as such:
\begin{center}
\begin{tabular}{||c c c||}
\hline
Function() & Computational Cost (Gas)& USD Equivalent \\ [0.5ex]
\hline\hline
Total Deployment & 8342204 & 1.195559526 \\
\hline
Security Registration & 3849155 & 0.5516400614 \\
\hline
\textit{MintSecurity} & 76293 & 0.01093389983 \\
\hline
\textit{TransferFrom} & 55146 & 0.007903226248 \\
\hline
\textit{Swap} & 89343 & 0.0128041552 \\
\hline
\textit{AddLiquidity} & 185368 & 0.02656593847 \\
\hline
\textit{Remove Liquidity} & 67137 & 0.009621711468 \\ [1ex]
\hline
\end{tabular}
\end{center}
In the template you are using, tables are set in a smaller font size, so the problem is solved automatically if you use a table environment instead of center.
In addition, you can use the tabularray package, so the table will automatically match the text width:
\documentclass[conference]{IEEEtran}
\usepackage{tabularray}
\usepackage{lipsum}
\begin{document}
\lipsum[2]
\begin{table}[htbp]
\begin{tblr}{||c X[c] c||}
\hline
Function() & Computational Cost (Gas)& USD Equivalent \\
\hline\hline
Total Deployment & 8342204 & 1.195559526 \\
\hline
Security Registration & 3849155 & 0.5516400614 \\
\hline
\textit{MintSecurity} & 76293 & 0.01093389983 \\
\hline
\textit{TransferFrom} & 55146 & 0.007903226248 \\
\hline
\textit{Swap} & 89343 & 0.0128041552 \\
\hline
\textit{AddLiquidity} & 185368 & 0.02656593847 \\
\hline
\textit{Remove Liquidity} & 67137 & 0.009621711468 \\
\hline
\end{tblr}%
\end{table}
\lipsum[2]
\end{document}
The verticle line in the third column has 2 gaps. How do I do I make it look full?
Here's the code:
\begin{table}[H]
\centering
\caption{Enzymatic cocktails and the respective tested concentrations in \%(v/v) used in Combined Hydrolysis}
\label{enzymatic cocktails}
\begin{tabular}{#{}ccc#{}}
\toprule
\textbf{Cocktail} & \textbf{Enzymes} & \textbf{Concentration \%(v/v)} \\ \midrule
\multirow{2}{*}{A} & \multicolumn{1}{c|}{Cellulase} & \multirow{8}{*}{\begin{tabular}[c]{#{}c#{}}0.25\\ 0.50\\ 1.00\end{tabular}} \\
& \multicolumn{1}{c|}{$\boldsymbol{\beta}$-glucosidase} & \\ \cmidrule(r){1-2}
\multirow{3}{*}{B} & \multicolumn{1}{c|}{Cellulase} & \\
& \multicolumn{1}{c|}{$\boldsymbol{\beta}$-glucosidase} & \\
& \multicolumn{1}{c|}{xylanase} & \\ \cmidrule(r){1-2}
\multirow{3}{*}{C} & \multicolumn{1}{c|}{Cellulase} & \\
& \multicolumn{1}{c|}{$\boldsymbol{\beta}$-glucosidase} & \\
& \multicolumn{1}{c|}{$\boldsymbol{\beta}$-glucanase and xylanase} & \\ \bottomrule
\end{tabular}
\end{table}
Vertical lines like in c| and horizontal lines such as toprule, bottomrule, midrule, cmidrule from the package booktabs do not match.
\documentclass{article}
\usepackage{multirow}
\begin{document}
\begin{table}%[H]
\centering
\caption{Enzymatic cocktails and the respective tested concentrations in \%(v/v) used in Combined Hydrolysis}
\label{enzymatic_cocktails}
\begin{tabular}{#{}ccc#{}}
\hline
\textbf{Cocktail} & \textbf{Enzymes} & \textbf{Concentration \%(v/v)}\\
\hline
\multirow{2}{*}{A} & \multicolumn{1}{c|}{Cellulase} & %
\multirow{8}{*}{\begin{tabular}[c]{#{}c#{}}0.25\\ 0.50\\ 1.00\end{tabular}}\\
& \multicolumn{1}{c|}{$\mathbb{\beta}$-glucosidase} & \\
\cline{1-2}
\multirow{3}{*}{B} & \multicolumn{1}{c|}{Cellulase} & \\
& \multicolumn{1}{c|}{$\boldsymbol{\beta}$-glucosidase} & \\
& \multicolumn{1}{c|}{xylanase} & \\
\cline{1-2}
\multirow{3}{*}{C} & \multicolumn{1}{c|}{Cellulase} & \\
& \multicolumn{1}{c|}{$\mathbb{\beta}$-glucosidase} & \\
& \multicolumn{1}{c|}{$\mathbb{\beta}$-glucanase and xylanase} & \\
\hline
\end{tabular}
\end{table}
\end{document}
So I went back to hlines in my code. Better would be to use the above mentioned package booktabs and avoid vertical lines instead.
I am attempting to create a table in latex as below, although I am a bit confused about where and when the \multirow and \multicolumn commands are to be used inside a tabular environment. Col_1, Col_2, and Col_3 are supposed to be subheadings but they need to appear in the second row.
What I started off with is, (the columns are duplicated, so I wanted to split it into multiple rows as shown in the image) :
\begin{table}[H]
\begin{tabular}{lSSSSSSSS}
\toprule
\multirow{2}{*}{\textbf{A}} &
\multicolumn{3}{c}{\textbf{Model_1}} &
\multicolumn{5}{c}{\textbf{Model_2}} \\
& {Col_1} & {Col_2} & {Col_3} & {Col_1} & {Col_2} & {Col_3} & {Col_4} & {Col_5} \\
\midrule
x\% & a\% b\% & c\% & x\% & y\% & z\% & 0. & 0. \\
\bottomrule
\end{tabular}
\caption{results}
\end{table}
You can place your subheaders in a row of their own, no need to worry about mutirows and such
\documentclass{article}
\usepackage{siunitx}
%\usepackage{booktabs}
\usepackage{float}
\begin{document}
\begin{table}[H]
\begin{tabular}{l|S|S|S}
\textbf{A} & \multicolumn{3}{c}{x\%} \\
\hline
& {Col\_1} & {Col\_2} & {Col\_3} \\
Model\_1 & a\% & b\% & c\% \\
\hline
Model\_2 & x\% & y\% & z\% \\
\end{tabular}
\caption{results}
\end{table}
\end{document}
Instead of the layout you show in your image, I rather suggest to avoid vertical lines for a more professional looking result:
\documentclass{article}
\usepackage{siunitx}
\usepackage{booktabs}
\begin{document}
\begin{table}[htbp]
\centering
\begin{tabular}{#{}lSSSSSSSS#{}}
\toprule
\textbf{A} &
\multicolumn{3}{c}{\textbf{Model\_1}} &
\multicolumn{5}{c}{\textbf{Model\_2}} \\
& {Col\_1} & {Col\_2} & {Col\_3} & {Col\_1} & {Col\_2} & {Col\_3} & {Col\_4} & {Col\_5} \\
\cmidrule(r){2-4}\cmidrule(l){5-9}
x\% & a\% & b\% & c\% & x\% & y\% & z\% & 0. & 0. \\
\bottomrule
\end{tabular}
\caption{results}
\end{table}
\end{document}
I am trying to recreate this table on Latex:
https://i.imgur.com/0Yu3rgp.png
but I can't figure out how to have a cell occupying three cells instead of just one (for the Tritanomaly percentage entry for example).
This is the best that I've been able to do so far:
\usepackage{slashbox}
\usepackage[table]{xcolor}
\begin{document}
\begin{table}[h]
\centering
{\rowcolors{2}{gray!15}{gray!0}
\begin{tabular}{|l||c|c|c|}
\hline
\backslashbox{CVD}{Sex}
&Male&Female&\textbf{Any}\\\hline\hline
Deuteranomaly & 5\% & 0.35\% & 2.68\% \\\hline
Deuteranopia & 1\% & 0.1\% & 0.56\% \\\hline
Protanomaly & 1.08\% & 0.03\% & 0.55\% \\\hline
Protanopia & 1.01\% & 0.01\% & 0.51\% \\\hline
Tritanomaly* && 0.02\% & \\ \hline
Tritanopia* && 0.01\% &\\\hline
Monochromacy* && 0.0001\% &\\\hline
\textbf{Total} & \textbf{8.12}\% & \textbf{0.52}\% & \textbf{4.32}\% \\\hline
\end{tabular}
\end{table}
\end{document}
Thank you in advance
\multicolumn is your new best friend:
\documentclass{article}
\usepackage{slashbox}
\usepackage[table]{xcolor}
\begin{document}
\begin{table}[h]
\centering
\rowcolors{2}{gray!15}{gray!0}
\begin{tabular}{|l||c|c|c|}
\hline
\backslashbox{CVD}{Sex}
&Male&Female&\textbf{Any}\\\hline\hline
Deuteranomaly & 5\% & 0.35\% & 2.68\% \\\hline
Deuteranopia & 1\% & 0.1\% & 0.56\% \\\hline
Protanomaly & 1.08\% & 0.03\% & 0.55\% \\\hline
Protanopia & 1.01\% & 0.01\% & 0.51\% \\\hline
Tritanomaly* & \multicolumn{3}{c|}{0.02\%} \\ \hline
Tritanopia* &\multicolumn{3}{c|}{0.02\%}\\\hline
Monochromacy* &\multicolumn{3}{c|}{0.02\%}\\\hline
\textbf{Total} & \textbf{8.12}\% & \textbf{0.52}\% & \textbf{4.32}\% \\\hline
\end{tabular}
\end{table}
\end{document}