I need to create an app with adaptive UI. for that I use auto layout and size class. but i can't get the expected result. it displays different UIs for different screen sizes. kindly guide me to create the adaptive UI(for all screen sizes). Thanks in advance.
This is indeed problem with constraints as mentioned in comments to your question. Using size classes only allows you to set constraints for all iphones at lowest level (that's why screen size for size class Compact x Regular is same for all iphones in xcode).
It is difficult to help you, without knowing all of your constraints. My advice is, use Preview assistant, where you can see all of your devices and generated UI. By opening this Preview assistant, tap on bottom "+" symbol and add device you wish to inspect.
As you can see on this screenshot, in my storyboard, there are margins around the middle view, however on iPhone 4, where width is smaller, these margins are lower (they have lower priority as constraint), while view retains it's width/height.
Related
In order to get an iPhone layout to display at 'correct' dimensions on iPad, I'm putting everything (rose) into a view (blue) within the ViewController (gold)
Click / tap to see Schematic View
The iPad is shown as the larger frame with the grey status bar.
So to cater for 7plus size iPhones downwards, I'd have to set up constraints for the 7+ within an iPad frame with different priorities
in different directions. Once the blue view is set, i should happily be able to add my Sub Views in I.B.
Since the whole lot has to appear in the very centre of Ipads, step (1) is to set alignment centre-line constraints of the blue View with priority of 1000.
Next would be to fix the size for iPad displays larger then 7+. Acheived with setting size constraints as a maximum to shrink from. I've only shown the ≤680, so that height or less as in step (2) but a lesser priority, say 750.
Then for it to reduce down in size toward SE size i want to hold that say 20 points away from the viewController (gold). So the constraint for that should be ≥20. as shown at (3), I've assigned 740
The principal works nicely in the horizontal direction, but not the vertical. I've tried endlessly to adjust different priority assignments, including the 'Content Hugging' and 'Content Compression Resistance'properties and I never seem to get the desired results once I put the actual entities I want to see (rose) within the Blue view.
I've read Apple's Autolayout Design Guides closely enough to almost say I've written them, and after 35+years of CAD and 3D animation modelling, I think I could describe objects in text parameters before the iPhone existed.
But I've been bested here. Am I taking the long way 'round to just get an ** iPhone only ** layout to display correctly? My little bald spot thanks you for your answer.
If it were me, I'd use trait variations instead of trying to handle layout for every size class in one set of constraints. I think if you take that approach, you can accomplish what you're after with a lot less work and in a way that's independent of devices that may appear in the future.
Also, keep in mind that if your app supports iPad multitasking, you may have sizes on an iPad that you're not expecting (like iPhone portrait width in device landscape orientation).
With autolayout, try not to think in terms of device type or orientation. Think in terms of the appearance you want for a particular size class, wherever it appears, in whatever device orientation. That gives you the opportunity to create a the best user experience for a given display area, and will make your life easier during initial development as well as when new features are added or new user devices are in the mix.
This is my first post. I just started coding. I want to make my first simple app. I own an iPhone 5S and when I add constrains in compact width / compact width & regular height(in XCode), it shows it right on the iPhone 6S plus simulator. When I try it on my iPhone it just looks weird. I know the sizes of the iPhones are different, but how can I correct this? Now, if I code in compact width / compact width & regular height, it feels like I am coding for an iPhone 6...
I hope someone can help me.
Here is the Storyboard:
I use compact/regular size classes for portrait, and any/compact for landscape, for those two phones you mention (actually, for all of the phones).
And, (squinting at your constraints in the tiny pic), it looks to me like the constraints are "wrong" (not optimal, at least). You've got the button pinned 550 down and 280 across from the edges, which won't look right for smaller devices.
Try aligning the button to horiz and vertical centers, and it will look right everywhere.
Or pin ONE of the edges of the button, and ONE of the top/bottom edges of the button, to the layout margins on one corner. Then it will look right on all devices.
Instead of removing the trailing and bottom constraints, as #Kevin suggests, set both of their constants to 0 (or whatever's reasonable), and make them greater than or equal, not equal.
For the constraints to appear fine for different screen sizes, one possible way is to add the required constraints to your button or label or any other component and have a preview look at it in the assistant editor section.(Click on assistant editor and in the split screen that comes up, find the Automatic section and within it the preview option)This helps to view the layout of your app for different screen sizes. This helps to manage your auto layout issues by a good extent.
I'm struggling a bit with constraints on iOS with the differents screens sizes nowadays.
I tried google and stackoverflow to find a solution but my english does not seem fluent enough to find an answer.
I got 4 buttons verticaly aligned, the first and the last one are constrained by the edges of screens (kinda easy). But I'm really struggling with the constrains of the 2 middle buttons. I can't find a way to make them equally spaced from the left and right buttons on every size screens.
Is there something easy and tricky to make these constraints right ? Or am I doing it wrong and should I try to do it programmaticaly ?
Thanks
Add three invisible views in middle of each button, make their width equal with each other with constraint then your four buttons will be equally spaced. For the Y then you just need to pin it at your desired place.
If you are going to support only iOS 9 and higher, then use a UIStackView.
The solutions to this problem is very simple. This can be solved using the concept of "spacer views". You have to place invisible views between each red coloured view. You would be requiring 3 in your case. Then make their background as clear colour. .
Next, make their width equal and constrain their edges to the views that are after and before that view. You then define the size for red coloured view.
REMEMBER dont give the "clear coloured views" any fixed width. It would be determined by the runtime.This would solve the problem. Tell me if any more information is required.
Here is a blog post for the solution for this
http://adamdelong.com/fluid-layouts-with-auto-layout-size-classes-spacer-views-and-constraint-priorities/
This is the youtube video for this
https://www.youtube.com/watch?v=eSG-3-QpmWk&feature=youtu.be
Besides Tj3n's answer with views between buttons, you could use
A UIStackView (iOS 9!) where you use for settings Axis: horizontal, Distribution: equal spacing
A Toolbar (depends on what you want to do with your buttons) with toolbar items and flexible Space between them
Why not size classes? Apple introduced the concept of adaptive user interfaces in iOS 8 relying on a combination of Auto Layout and size classes.
If you aren't aware of what is size classes, there are plenty of tutorials available, please find one.
Summary: Apple very cleverly removed two story borads for iphone and ipad and made a single story board for universal app. No you dont have to struggle trying to apply autolayout constraint that satisfies all the screen sizes :)
Below are few of the size classes and their meaning :)
Regular width x Regular Height ----> iPad Potrait mode/ipad landscape mode
Compact width x Regular Height ----> iPhone 6 plus,iPhone 6,iPhone 5s,iPhone 5,iPhone 4s potrait mode
Compact width X Compact Height ----> iPhone 6,iPhone 5s,iPhone 5,iPhone 4s landscape mode
Regular width x Compact Height ----> iphone 6 plus landscape mode.
You can select the size classes you want to support from story board :) and start applying constraints specific to each size classes (like buttons in middle) or if you have generic one (like your buttons fixed to screen) for all the size classes.
You can deploy, remove, reuse or delete the constraints form various size classes.
SUMMARY: Buddy, If you are not using size class yet, its a high time to start using it :) There is a wonderful video on it in apple WWDC sessions 2014 i believe. Download, watch, start playing with it.
Happy coding :)
you can use equations to get this appearance.
use views' trailing points to get this.
View1.trailing = superview.trailing*(2.0f/9.0f)
View2.trailing = superview.trailing*(4.0f/9.0f)
View3.trailing = superview.trailing*(6.0f/9.0f)
View4.trailing = superview.trailing*(8.0f/9.0f)
if you make View1.width = superview.width*(1/9.0f) you can achieve what you want.
there are a lot of similar solutions for this issue. but the base is using trailing points.
It may also be done with using centerX positions of Views.
View1.centerX = superview.trailing*(3.0f/15.0f)
View2.centerX = superview.trailing*(6.0f/15.0f)
View3.centerX = superview.trailing*(9.0f/15.0f)
View4.centerX = superview.trailing*(12.0f/15.0f)
Thanks to LearneriOS answer, I solved my problem.
In order to get my wished result, I created 3 views with 10 width.
My first and my last button were already constrained. I constrained my first extra view to my first button with Horizontal spacing then i constrained my first extra view with the Center vertically in container. I then constrained my extra view to his own width and heights.
There come the important part: I did go on the constraint menus and selected the width constraint. The value inside was still 10 but I did change the priority from 1000 to 750.
Then I did copy my first extra view and constrained all of them to the nearest buttons, the same way I did with my first entra view but I removed their width constraint (to all the extra views but the first one) and constrained the extra views with the first one by plugging the: Equals Width.
Then I got my result, I hope it was clear enough and thanks again.
I'm a bit stuck and any help would be greatly appreciated!
I'll give you a quick overview. I have designs for a screen that were built in sketch using an iphone 6 screen size, then redesigned to fit and look right for an iphone 5/5s/5c, and 6 plus as those are the only devices that I want to support.
But the design portion or implementing the designs for just one specific screen size is easy and I understand that part. Where am I'm lost completely, is how to implement a design in one view controller that looks the way that it should in all the screen sizes I designed for.
I've gone through more than a few auto layout and size class tutorials and not sure how I properly use them so that the app recognizes "this is an iphone 5, use these image sizing and placements instead, and this is an iphone 6 plus, use these" and so on.
Everything I've seen to this point regarding auto layout and constraints only use 1 set of numbers to judge distance from elements for example, but all screen sizes would have different distances.
What am I missing or not understanding? I know I'm looking at something improperly.
Thanks in advance for all help!
You're correct that just one set of numbers could be used to judge distances, but this can still describe how a view should appear on different screen sizes. Your problem may be that you're thinking of constraints as describing the frame of your view? (Which obviously has to be different on every device). I find it more helpful to think of constraints as describing how each edge of my view relates to another view.
For example here's a view controller I setup with all the same constraints and how it would look on different devices. The constraints describe how the large grey view is pinned it's left and right edges 20 points from the left and right edges of its container view. It's pinned to 8 points from the top and 8 points from the top of the label. The label is centred vertically and horizontally and it has intrinsic content size. Each button is pinned 20 points from the bottom edge with button 1 and 2 being pinned to the 20 point from the left and right edges respectively.
I don't know if that helped or if that wasn't the answer you were after and you need to arrange your views differently depending on the device: you can tell Xcode which device size and orientation the constraints you're creating are for, using this button in Interface Builder.
Use it to select a device size/orientation. After, any constraints you create will only be used on that device. By default any width and height are selected so normally your constraints are applied to all devices.
Also, you cannot choose which devices you want to support, only the iOS version.
I've been having such a hard time trying to figure out how this thing works. It's so random and I have no idea what else to try. I've looked up multiple articles on this issue and everyone just says change the scale. Changed the scale does not help, it's got nothing to do with what's happening here. I'm not sure if this is related to the bottom of Xcode where you can change the dimensions (Any vs Any / Any vs Regular Height, etc...) I've asked my mobile development teacher at school as well and he couldn't figure it out either. Any help would be greatly appreciated!!
Picture below:
http://tinypic.com/r/281fw5w/8
Your problem is not scaling. What you need to look at is auto layout and constraints.
You can use the icons in the lower right edge of the interface builder to get at them or control drag from a view controller (like a button, label, etc.) to the containing view (or any other view controller for that matter.) Usually, the main view window itself. When you release you can now add constraints to "attach" the element to that other element relatively. For instance, you could attach the things on the left to the left side and the things on the right to the right side. Now, regardless of the dimension of the actual device screen, those elements will appear in those locations relative to the device screen.
The problem is that the position of elements from your perspective is right for the canvas you see in the Interface builder, but once the app is run, the real canvas has different dimensions.
To manage the position, size and other attributes of UI elements, there is a system called AutoLayout.
It is quite ingenious because it is similar to natural language.
For example "I want this element to be in the middle of the screen."
or
"I want this element to be 20 pixels from the left corner and 57 pixels from the element that is above this element."
By combining these rules you basically create a set of layout constraints, that are applied in runtime to the view hierarchy and view are laid out properly.
Autolayout allows for very sophisticated layouts.
Another aspect you need to take into account that you might want your app to look well in all form factors from 3.5 inch iPhone up to iPad air.
Since these devices differ considerably in size, Apple introduced an abstraction called Size Class.
Size Class is an abstraction on top of concrete size. Concrete iOS devices have vey concrete dimensions. But in natural language you often say it's big ,or small ,or normal. And this the level of abstraction size classes use.
For each size class you can have a particular set of auto layout constraints.
So by combining AutoLayout and SizeClasses, Apple solved the problem oh how to have one application but one that can still accommodate specific form factors and can adjust its layout to them.
In Xcode6, all storyboards/xib files have autolayout & sizeclasses enabled by default. Interface builder provides you with a comfortable environment where you can set up your layout by creating constraints for each size class combination.