I need to connect my Delphi software to a SmartDate x40 printer, I've tried using winslock. I'm very new at Delphi and I'm unable to make it work, I'd highly appreciate any tips or little help any of you kind guys could make.
I've seen a few posts about using Winslock with Delphi, tho all of them use a client-server connection in whish is the client the one making the connection, I'd need being the server initiating the communication to the SmartDate machine being able to send a few ASCII orders.
Thank you very much.
Perhaps you misunderstand the terms client and server. The printer is the server (it serves the client application'. Your application is the client (it asks the printer to do something.) That is why the examples are as they are. Your application could be a server for something else, but it is still a client of the printer.
Related
I have to develop a simple application in Delphi XE2. This application will connect to a service running on a server with IP Address(say xxx.xxx.xxx.xxx) with some Port No (say xxxx) using TCP/IP protocol and will get reply from the service running on the server.
I have created two textboxes: txtRequestMsg, txtReplyMsg and a button called Connect.
I need to open a TCP connection and send some data and get some data back in response, something like a ping, but not using ICMP, just raw TCP.
The most commonly used Delphi internet libraries that provide TCP and UDP components for various TCP client (originating) and TCP server (answering) protocols are:
Indy version 10, which is included in the box with your Delphi XE2 installation. Almost any of the demos would probably give you enough information to get started, but be prepared to read documentation, too. Nobody is going to teach you in a single stack overflow question how to write network applications. There are MANY people on Stackoverflow who use this library, and an Indy team member is often on here and answers questions about Indy, and it's well respected, and unless you have a real reason not to use it, you should probably start with Indy. Ask specific questions about Indy when you've tried something, rather than vague questions like this one, please.
ICS by Francois Piette. I like it because the code is smaller and simpler and I find it easier to use than Indy, but fewer people use it. There are people on Stackoverflow who use this library, including me, and Francois himself who is active here on SO.
Synapse. I have only used this a bit, but I know lots of people use it.
I have a custom pair of client/server sockets (TJDServerSocket and TJDClientSocket) which wrap the TServerSocket and TClientSocket in the ScktComp unit. I don't have any issues to fix, but would like to know something. I'd like to add a feature to the client side to automatically search the network for any instances of a server socket (specifically my server component).
I'm open to any suggestions, but has to be specific to the use of the ScktComp unit in Delphi 7.
Here's a link to the components of mine.
Never used the TServerSocket and TClientSocket myself, and I don't have the help files within reach, so I can't immediately see if this would work with those components.
For a project I did I needed something like that too. I ended up with using UDP to broadcast a discovery request (within the same subnet of course). The server, listening on a particular port for such a request, would reply its data back. When multiple servers would exist (a situation that though rare could occur) the client just picked the server with the required service(s) and the least load. That load was part of the data the server send back.
It worked out nice, wasn't all that difficult to write, and turned out reasonably efficient too.
The request protocol is completely up to you. The one I devised allowed clients to send a request detailing the services they need, and servers replying listing their services and the load (= connected clients in active use).
After selecting the server to talk to, a client would register itself for the services it needed, and could use them after that.
Hope this helps.
There are some standard protocols for service discovery. See for example: http://en.wikipedia.org/wiki/Zero_configuration_networking
Mailslots is a nice option here. It'll broadcast to every PC on your subnet. See Jeroen's answer to this question:
Suggestions on writing a TCP IP messaging system (Client/Server) using Delphi 2010
Searching is as easy as port scanning.
If you don't like the brute force approach, the server can register itself to a well known service application (could be a web server), and the client can connect to the service application to ask. It's quieter than broadcasting.
With more information, such as details about the network (who's it for?), I can suggest a more precise answer.
I have a Client/Server application written Delphi. Essentially all the application is doing is transferring xml data streams between a server application and connected clients. I am currently using the Indy TIdTCPServer component. But the server side application keeps crashing on some of my installments. And it has been extremely difficult to debug. So I am wondering if there is some "architecture" I should be utilizing which does all the tcp/ip connection management and database connection pooling, allowing me to concentrate on the business logic.
Here are more details:
clients must maintain a "persistent" connection. There are times when the server must notify and send data to all connected clients.
clients are connecting from laptop computers using wireless aircards. So network "drops" are pretty common.
Backend database is SqlServer.
There can be upward of 100 computers simultaneously connected at a time.
When the server gets a new connection (TCPServer.OnConnect) I instantiate my own object containing it own SqlServer database connection. When tcp connections are dropped I in turn free these objects (and associated database connection).
Client application have a TTimer built into them. They routinely send heartbeats to the server. And if they "drop"/"lose" their connection they automatically establish a new connection once the network is back.
Anyone have any suggestions on the best approach/architecture here?
I presume the Indy component would work, but at the same time feel I am "reinventing the wheel" with respect to managing the connections.
Three component sets I am aware of that will take care of the nitty gritty technical aspects of client server applications for you:
kbmMW: http://components4developers.com/
Asta: http://www.astatech.com/index.asp
RemObjects: http://www.remobjects.com/
You may have to rework your applications to take advantage of the way these component sets work, but assuming you have properly separated layers that shouldn't be too much of a hassle and will buy you the advantage of well tested and widely used code for your client server work.
If you want some light TCP/IP components, take a look at our SynCrtSock unit.
You'll find low-level classes to create IP Client and Servers.
We implemented both TCP/IP and UDP/IP in one of our applications.
There is also a THttpServer class, which implement a HTTP/1.1 server. Therefore it follows the HTTP/1.1 connection management. There is also an optional compression, and using HTTP/1.1 on a port other than 80 is not a bad idea. And what is good with HTTP/1.1 is that it can pass through firewalls, and can be easily be VPNed or hosted on another HTTP server (like IIS or Apache) with a proxy. There is even a FastCGI class, if you need such a server under a linux-based solution.
Of course, a THttpClientSocket class does the same on the client class.
We use these classes to add HTTP/1.1 connection to our Open Source SQLite3 RESTful framework - http://synopse.info/forum/viewforum.php?id=2
See http://synopse.info/fossil/artifact?name=722e896e3d7aad1fe217b0e2e7903483e66d66d1 for the SynCrtSock unit. Open source, work from Delphi 7 to Delphi 2010.
Misha Charrett's CSI Application Framework covers pretty much exactly what you're asking for.
It's an open source Delphi framework that at its heart is a distributed message passing and threading framework that allows XML message passing from both client to server and server to client.
It can handle disconnections/reconnections, high client numbers and there's an optional virtual database library that will handle SQL server (or you could just use same SQL Server access you're using now).
It's not particularly well known yet but I can tell you that it's been actively developed over the last few years and that the author Misha is very keen to assist anyone who's interested in using it in their application.
Well, it would probably require a complete rewrite of much of your C/S code, but instead of using the Indy components, you could try to use a COM+ solution instead. Basically, you would create a COM+ component that will be installed on the server and your client applications will connect to this client and call the functions of this component directly. It will have transaction management which will be handled by Windows itself and the same is true about handling transactions. It's also technically possible to create events, which would allow the server to do callbacks to the client, although that would make things a bit more complicated.
I don't think this solution would work out for you, though, unless you have a lot of experience with COM development in Windows and/or you're brave enough to try something different.
In the past, I had a similar problem where hundreds of clients had to connect to a single server, doing all kinds of database transactions. It has a steep learning curve but me and my team managed to get things working and once we understood the technique, it resulted in a very stable and reliable solution which did manage to have up to 500 users simultaneously doing updates and other actions in a one-time extreme stress-test. But again, the learning curse is steep, so it might not be the solution you're looking for.
(Still, COM+ will use a lot of functionality that's build-in into Windows, like transaction management, database pooling and whatever more.)
If you use Indy each connection will equal a thread.
Anyway, I suggest for connecting to MSSQL to use SDAC from Devart http://www.devart.com/sdac/ and for the connection layer to use HPScktSrvr based on I/O Completion Port from http://www.torry.net/authorsmore.php?id=7131 (I don't know though what changes it will need for TThread changes in newer VCL).
You build your client class arround THPServerClient, you set your new class as the server ClientClass and the framework will create automatically new clients for you.
You may also want to have a look at the ICS/Midware combo: http://www.overbyte.be/
I have a server and some clients (about 50) in an intranet. The clients send short (about 40 character) string data to the server and the server answers with a similar string. There are up to (but not permanently) 2-3 requests per second for each client. The server has to serialize the requests to get the response strings.
The system should have as less as possible impact on the network as possible (i.e. the server may run something like a webserver already). It should be as easy to install and administer as possible.
What are the possibilities to achieve this using Delphi (Client: D7, Server up to D2010)?
I use the Synapse library for such a simple server. Its lightning fast, very light, and threads easily. The demo Echo in the main synapse install is a fantastic start for what your trying to do. If you are going to be performing database access inside each request/response thread then I strongly also suggest looking at the connection pool example by Cary Jensen to keep your database connections in check.
TCP, definitely. But I'd like to give a vote for ICS. Never liked Indy ...
What about Indy's TIdTCPServer and TIdTCPClient? They provide command handlers, which makes implementing text-based protocols very straight-forward.
There are a lot of options.
Ultimately, I agree with Smasher and like using sockets. They're quick, easy and portable. If you're dealing with a fairly simple protocol and don't need a full n-tier solution, creating a TCP or HTTP server application is dead simple, very light weight, and easy to make compatible with any client. You can even add SSL support to these stand alone applications without having to configure a web server or interfering with it, if it's already running on the same box.
I use RemObjects SDK for this sort of purpose. It takes care of all the difficult stuff, and I just ask it to connect and make function calls to pass the data.
Is it possible to emulate incoming messages using Indy (if it's of any importance: I'm using Indy 10 and Delphi 2009)? I want to be able to create these messages locally and I want Indy to believe that they come from specific clients in the network. All the internal Indy handling (choice of the thread in which the message is received and stuff like that) should be exactly the same as if the message would have arrived over the network.
Any ideas on that? Thanks in advance for any tips.
What you want to do has nothing to do with Indy, as you would need to do this on a much lower level. The easiest way to make Indy believe that messages come from a specific client is to inject properly prepared packets into the network stack. Read up on TCP Packet Injection on Google or Wikipedia. EtterCap is one such tool that allows to inject packets into established connections. However, this is definitely going into gray areas, as some of the tools are illegal in some countries.
Anyway, all of this is IMHO much too complicated. I don't know what exactly you want to do, but a specially prepared client or server is a much better tool to emulate certain behaviour while developing server or client applications. You can run them locally, or if you need to have different IP addresses or subnets you can do a lot with virtual machines.
Indy doesn't have any built-in mechanisms for this but thinking off the top of my head I would recommend building a small test application (or a suite) that runs locally on your development machine and connects to your Indy server application to replay messages.
It should be irrelevant to your Indy server applications if a TCP connection is made either locally or from a remote host as the mechanisms by which a server thread is created and a command processed is identical to both scenarios.
My last gig involved using Indy and all our testing was done with a similar Resender type application that would load local message files and send these to the Indy server app.
HTH and good luck!
One thing you can do would be to create virtual machines to run your test clients, that way they will not be seen as "local machine", and its fairly simple to create a complex network with VMS -- provided you have enough memory and disk space. The other advantage of testing with VM's is you can eliminate the development environment completely when its time to focus on deployment. Amazing how much time that saves alone.
VirtualPC is a free download from Microsoft and works fairly well. VMWare has another option, but costs a little more to get started. For development purposes, I prefer the desktop versions but the server versions also work well. You will still need to have a license to install the virtual OS. MSDN membership is probably the cheapest way to go, and allows you to build test environments for other flavors of the OS.
Indy has abstract stack mechanism for crossplatform support (IDStack.pas) I think u can hack the stack for windows (IdStackWindows.pas). It is a class. U can even consider to derivate it and override some functions to do the hack.