I'm working on a screen that has a UITableView below the screen(thus invisible) initially, but will pop up when user click on a button. I know it's not supposed to be seen on the screen, but just for the sake of design, is there a way to make it visible when I'm working on main.storyboard?
Please see the picture attached below. It's really hard to work on the UITableView when it's beneath the toolbar. How can I force xcode to display them so it's much easier to work on?
You can't, but you have 3 workarounds:
Move it into view (Xcode will complain that it's not in the right position, but it doesn't matter)
On the bottom left on your storyboard, you can open up the view hierarchy, you can find your element there for creating constraints, linking it with your code and everything else you'd want to do.
Increase the visible size of the viewcontroller on your storyboard, trough selecting your viewcontroller on the storyboard, changing Simulated Size to freeform and increasing the values (will not affect size when running).
The easiest way to deal with this is to:
open storyboard
select the viewcontroller you want to edit
open the Size Inspector
Switch from Fixed to Freeform
Type in a larger height (like 1000)
Simplest thing is to manually do what your button does in the app.
In the view hierarchy on the left, select your table view and move it down to the bottom. This will bring it to the front in interface builder.
When you are done, move it back.
I do this all the time and you get used to doing it. Just watch out for accidentally moving it inside another view when you drag it down or up.
Related
As shown in the above picture, I am trying to create a scrollview in storyboard. everything works well and when I run the app, i can scroll through the view.
Problem is, during the storyboard design phase, i am unable to scroll down the view to the below part of the scroll view? any idea how to do that?
Thanks
Your can not scroll from the storyboard, for design purpose do following
From storyboard
select your VC
From Right panel select freedom size
Now select your VC size
NOTE: when your design is completed make sure now your VC is in fixed mode.
My suggestion is to enlarge that controller by:
Selecting the viewcontroller
Changing the simulated size:
Once all the editing it done you can set the simulated size back to Fixed
In this way you are able to see the whole screen at once while designing the UI
Tap on the view, go the the attribute inspector and then change the y position to something negative, say -100,
Do your UI changes accordingly and then again put the y value as 0.
Note : During the time you change it to negative, constraints are going to be orange, signifying that they are not correct. But once you put them back to 0, they are going to be fine.
I used to be able to do this:
UIButton *bigBottomBtn=[[UIButton alloc]initWithFrame:CGRectMake(0, self.view.frame.size.height-60, self.view.frame.size.width, 60)];
I also used to be able to just drag a button onto a storyboard and add a constraint that would hold it to the bottom of the parent.
What is going on with Xcode, Autolayout and Apple for that matter....is my Xcode not working properly? Have I missed a major memo? is Apple just going downhill fast?
Your button-creating code used to work (and still does) if self.view's frame was correct at the time you created the button. Note that the view doesn't necessarily come out of the xib or storyboard with the correct frame; the xib/storyboard contains the view at some design size which might not match the current device. This wasn't as much of a problem when all iPhones had 3.5 inch screens, but became a pretty common problem with the advent of the iPhone 5's 4 inch screen.
The view isn't guaranteed to have its correct frame until its superview's layoutSubviews returns, so if for example you're creating bigBottomBtn in viewDidLoad, that's too early. Many questions on stackoverflow cover this problem. You either need to set the autoresizingMask of the button, or implement layoutSubviews or viewDidLayoutSubviews to update the button's frame, or turn off translatesAutoresizingMaskIntoConstraints and install constraints. Note too that your view can change size if you support rotation, slide over or split view multitasking, or if your view can be the detail view of a UISplitViewController, so it's a bad idea to try to guess the correct frame of the button based on the device's screen size at the moment the button is created.
Note that storyboards now by default use a design size of 600x600, which isn't the size of any device. This is probably because if Apple chose some device's size (say, the iPhone 5's 320x568) as the default, and you happened to use a device of that size as your primary (or only) test device, you could easily forget to think about what your app will look like at other sizes. However, you can explicitly set the design size to some device's size if you want:
I usually use “iPhone 3.5-inch” if I don't specifically need something bigger, because it lets me get the most scenes on the screen simultaneously (and produces the smallest screen shots for stackoverflow).
As for “I also used to be able to just drag a button onto a storyboard and add a constraint that would hold it to the bottom of the parent”, I have good news: you still can. Example:
However, you do need to be careful if you have filled your root view with a table view as appears to be the case in your screen shots. You need to drag the button to the document outline in that case, because if you drop it on the table view, Xcode will assume you want it to be the table view header:
Trying to pin a table view header to the bottom of the screen would be folly.
As for the Editor > Align menu, I have found that the items can be mysteriously inactive, which is frustrating.
Note, though, that only the “Horizontally in Container” and “Vertically in Container” will work (when they work at all) with a single view selected. To use the other items in the menu, you need to have at least two views selected, because the other items align the selected views with each other by setting their frames:
If you only have one view selected, Xcode doesn't know what other view you might want to align it to.
Those menu items are perhaps useful in the springs'n'struts model, but they don't add constraints, and under autolayout you probably want constraints to enforce the alignment at run time.
As far as I know, those menu items have never added constraints, but I'm not going to reinstall Xcode 6 to verify that, because there's a convenient popover that will add constraints corresponding to all of those menu items:
In xcode you always need to add buttons according to its visibility. As you said you need to show button on top of tableView and it should be aligned to bottom. For that You just need to arrange the order of items. as shown in the image below.Provide the layout for the button.
I'm quite new to the Xcode programming. I've added some view controller, labels, buttons and image view to my program, but, when I try to adjust, for example, the size of a label, the view controller that that label is in, gets displaced. I mean, when I try to drag the side of the label to change its size, the view controller moves down, making my label get displaced in the view controller. It is a very weird situation, here you have the screenshot of my project, the view controller misplaced is the one that says "Perfil" on the navigation bar. Every time I try to change one of those light blue views size, the entire view controller changes place. The more I try to change the side the more it will go down.
Sorry for my English, not my native language.
I think the bigger issue is that you are using Table View Cells that are not part of a table view.
Table ViewCells are supposed to be a part of a UITableView and not just stuck in a view.
Using UITableViewCells in this way is what is causing the strange behavior.
If you are trying to make a table, put a UITableView in your view, and then you can customize the table view cells in there.
It you aren't trying to make a table, just use UIView's instead of those UITableViewCells.
I have two ideas that may fix the problem:
First, if you're trying to drag and drop the label but the view controller moves instead, then you might just be grabbing the view controller's background by mistake. When this happened to me, it was because the order of my components in the xib file was wrong. Things are ordered from back to front, and when you click and drag something, you'll just be clicking and dragging whatever's on top. You can try and get past this by clicking the UI element on the left to be sure you select it, then dragging the handles.
It looks like you have things in a reasonable order, so that may not be the culprit at all.
Second, if that doesn't work, select the element you want to edit on the left, then open up the utilities pane on the right. Click the Attributes icon (should be fourth from the left) and look towards the bottom. You should see something like this:
Just manually edit the position and size of your labels there. You should see the change immediately reflected in the display.
Hope this helps!
Setting no autoresize behavior in Interface Builder solves the issue.
I have unfortunately decided to make my app using the IB, which I discovered was a terrible choice, but I'm afraid I must deal with it.
So originally, I had all my fields, buttons, etc, placed on a single view, with enough space left on the bottom that on the 3.5" screens everything displays neatly.
Well was that a terrible idea. Now I need to add just a few more things to the screen, and although it works in the 4" mode, 3.5" is out of luck. "Ah ha," I thought, "All I need to do is add a scrollview containing everything on my screen, and for the 3.5", it will scroll instead of reposition.
Long story short, I added my subview, placed it as the very back object on my screen, draged all items into it... And I got a mess.
Ain't that just dandy.
Anyways, I would like to know if there is someway to get Xcode to not reposition all these elements when I do this, or, is there another way to get all these elements to become subviews under this scrollview.
First select all the views from the tree on the left. Then click once on the view controller's frame (the black status bar, not the objects inside the controller). Now press cntl-c to copy all of them. Now double click on the view you wish to add them to and paste them. This will retain all the view's layout locations. If they don't copy over exactly into position just hold down shift and press the arrow keys to get them into position. Dragging the views into another view reset all the position back to the center.
I have a vertically scrolling uiscrollview - imagine an 'about this app' page of a tab bar app which goes on a bit and requires a scrollview. It only contains a few images, a video and some text (only the video has been coded in - the rest have been placed in the GUI). In storyboard (Interface Builder?) Xcode 4.2, everything is set up as it should be and works fine, but the view is only as large as what you see on the screen, is it not possible to manually arrange in storyboard the items that are initially offscreen - that you need to scroll up to? The only way I've found so far is to design them on the visible view then navigate them down with the arrow keys..
In the storyboard select the viewController, then in Attributes inspector change 'size' to 'freeform'. Then change the 'height' of the view/scroll view to as big as you need. The default settings of struts and springs should take care of resizing the view back correctly when the app is run, but you should double check.
I feel your pain. The only way I found is to manually pan the scroll view in the size inspector to reveal the portion of the view that you wish to visually edit.
Use a UIView to contain elements so they are positioned relatively to this view. Add the view as a subview to the scrollview at 0,0.
pan: use the Y coordinate say to -200, then edit the contents.
to place more contents in the hidden part, pan again to reveal new real-estate
when finished, restore the values of the ScrollView's height and X,Y position.
Make sure the scroll view frame rectangle is smaller than the contained view.
New: 3/26/2013
I stumbled upon what I think is even simpler way of dealing with UIScrollView directly in storyboard.
No code needed, just storyboard settings. This maybe new in iOS6.1 / Xcode 4.6
No need to disable constraints (i.e. uncheck "Use autolayout" in File Inspector for storyboard file)
No need to add UIScrollView* scrollView; in .h
No need to add self.scrollView.contentSize = ... in overrides of viewWillAppear or viewDidLoad
Here is what I did (important parts highlighted with **): (see code)
Create a new project with storyboard enabled
Drop in a UIScrollView, set class in identity inspector for view controller
In attributes Inspector, change Size under simulated metrics to Freeform**
Select scroll View; In attributes inspector, turn on "scroll enabled" and "background" to "White" (you'll figure out why - if you don't)
Under Size Inspector (with scroll view selected) change the height to 900 for example**
Add buttons, one on top and one at the bottom
Add a default handler for buttonTouchUpInside for both buttons and simply Log sender.
See Code Select the View Controller and scroll view and check inspectors.
Just change the 'Simulated Size' of the view controller to freeform and set a height that is larger than the usual size, you will be able to see all the outlets you need to edit.
On iOS 6.0 you can drag a Container View inside your Scroll View. This will automatically create a new View for your content, outside of the current scene. You can then resize this view as big as needed to fit your content.
I believe you would still have to set the ScrollView content height at runtime, but at least you can design you content view at once without having to scroll up and down on IB.
Just uncheck the "Autoresize subviews" from any view that you're trying to resize and it should keep all your objects from resizing with it.
I've been struggling with this for a while now, and every single thing I've tried has failed.
Specifically, What I am trying to achieve is a freeform sized modal dialog with a scrollable view containing a container for another view. I have had a lot of varied results, including occasionally having it working correctly. Most often I get it looking exactly correct, but with no scrolling.
In finally downloaded Dickey Singh's code, which worked perfectly but had nothing special. (Excellent clean solution BTW). So, I added a container view to it, exactly as I had in my code, and it broke!
After some experimenting, I worked out what is going on. Just bear with me.
1) Using Auto Layout, the size of the scroll view seems to dictate what the scrolling bounds will be. Setting "contentSize" in "USer Defined Runtime Attributes" seems to have no effect on this, and neither does setting "contentSize" or "bounds" in "viewWillDisplay" or "viewDidLoad". Thus if the initial size of the scroll view is 800x800, that will be all the space that can be displayed. For this reason, when I want a scrollable region, I create a container view and then put the scrolling view inside the content.
2) Without Auto Layout, setting "contentSize" in "User Defined Runtime Attributes" works, as does by setting it programmatically in "viewDidLoad". I prefer to use "User Defined Runtime Attributes" because it keeps the size with the layout. This solution allows you to use scrolling view with more flexibility, since it can be any size at design time.
3) Regardless of Auto Layout, if any view within the scrolling region exactly matches EITHER the horizontal or vertical frame bounds, then the scroll view ceases to function as a scroll view. This applies to my own code and to Dickey Singh's code in every possible configuration that I have tried.
I have no idea what is causing (3), but it is clearly a bug.
I hope this helps everybody out there who is struggling to use scroll view. I imagine that some people are using them without any problem, and some (like me) have had noting but problems with them.
Here's my solution to design a ScrollView with a content larger than the screen entirely in Storyboard (well, except for 1 single line of code :-) :
https://stackoverflow.com/a/19476991/1869369
I'm currently developing an app for iOS 7, and I did exactly as #Dickey Singh's answer, but it doesn't work in the beginning.
After checking the storyboard, I found that we also need to add Auto Layout Constraints for the view controller who holds the scrollView.
It seems that such auto layout constraints would be added automatically before Xcode 5, but now we need to do it ourselves.
The way to add constraints: First select the view controller in the storyboard; Enter 'Editor' in the top menu; Select the 'Resolve Auto Layout Issues'; Select the 'Add Missing Constraints In Container'. Done :-)