Please refer the fiddle codehttp://jsfiddle.net/yuvarajkumarg/az290eyq/1/
In Highchart of type Chart, when we plot for height = 0 and pressure = 2, we get a gap as shown in jsfiddle. I want point to be plotted on the X-axis(2,0). But the graph looks like it is plotted on (2,2) since the y-axis plot starts way above the x-axis. How to remove the gap ?
The issue is the categorized axis.
There are probably a few ways around the issue, but I would do it this way (on your xAxis):
tickmarkPlacement: 'on',
min:0.5,
max:6.5
Example:
http://jsfiddle.net/az290eyq/2/
You could also do it by not using categories, and using the axis label formatter in order to display the numeric sequence that you need.
[[ edit for comments:
For the min and max values - the x axis values for a categorized axis are the category array index values. So the first category is x = 0, the second is x = 1, etc.
Because Highcharts puts the the label in the center of the value's space, setting the min/max to the actual min/max value +/- 0.5 will align the center of the space with the start/end of the axis.
So, you can calculate this dynamically by using 0.5 for the min, and counting the categories array and using (count -1.5) as the max.
Additionally, setting the tickmarkPlacement proerty to 'on' moves the tick mark to the center of the space as well, aligning the ticks with the start/end of the axis as well.
Related
I have the first chart:
Multiple y-axis with broken y-axis for left-hand-side y-axis only
The left-hand-side y-axis is broken from 1M to 25M, while there is no broken setting for the right-hand-side y-axis. The horizontal lines for the 2 y-axis in the chart area make it a little bit hard to read. It can be improved by setting the broken for the right-hand-side y-axis from 250K to 6.25M like the 2nd chart shows:
Multiple y-axis with broken y-axis for both y-axis
The broken setting is set by user. They cannot preview the result when configuring the settings.
I want to have a chart with the horizontal lines for both hand side overlapped with each other. I can only add the broken setting for right-hand-side y-axis. But I should know the min & max value for all the series used. The min value is default to be 0, but the max value for the series which use left-hand-side y-axis is around 44M, while it is around 13.5M for the right-hand-side y-axis. But the chart shows me 56M for the left-hand-side y-axis, while it is 14M for the right-hand-side y-axis. I cannot predict the max value for the y-axis while generating the chart setting.
Is it possible to add the broken setting for the right-hand-side programmatically? Or is there any other approach?
Is it possible to add the broken setting for the right-hand-side
programmatically? Or is there any other approach?
Yes, adding programmatically calculated breaks seems to be the only way. You can use for example chart's load event where you have access to all the required values.
For example:
chart: {
events: {
load: function() {
const yAxes = this.yAxis;
yAxes[1].update({
breaks: [{
from: 20,
to: 40,
breakSize: 0
}]
});
}
}
}
Live demo: http://jsfiddle.net/BlackLabel/s01box6p/
API Reference:
https://api.highcharts.com/highcharts/chart.events
https://api.highcharts.com/highcharts/yAxis.breaks
I need to add graphic annotations in a chart on the date (x) axis, so I added a new series with a constant value of 0 (x: date, y: 0), with custom image markers. Annotations look like this:
The problem with this approach is that the constant 0 value in the annotation series is messing around with the automatically placed ticks (on the right), which then stretch the whole Y range from 0 onwards, instead of the min and max of other series, as it is by default. That drastically affects the display of other series, whose value are far away from 0, making them look less diverse.
Highcharts comes with an annotation module, bit I didn't find an option to pin it to the axis and use a different graphic.
Is it possible to either:
a) Prevent the annotation series to influence the Y axis ticks?
b) Make customized annotations on the X axis without adding new constant series?
The easiest solution here I think would be to create a new yAxis, and have your constant series use that yAxis. Like this:
yAxis: [{
...//original yAxis
}, {
visible: false //this hides all axis lines, ticks, and labels
}]
Then in the series, you would set:
series: [{
... //Real data series
}, {
yAxis: 1, //constant series
...
}]
I have a Highcharts with two series (one as type "line" and other as "scatter"). The "line" serie has 1000+ value points and the "scatter" serie has one value point (the y value of this point is = 2)
I want to select the "scatter" point on the yAxis, but this point will not be selected. Instead of this point, the other points (line) are selected. The property "allowPointSelect" is set to true
Other important options that are enabled:
crosshair = true (xAxis only)
stickyTracking = true;
What I have tried already:
the radiusPlus and radius properties changed to bigger value <100 (plotOptions.series.marker.states.hover and plotOptions.series.marker.states.select)*
Note: It's very difficult to reproduce this in jsfiddle with 1000+
values :(. That's why I added some screens).
Does anyone have a solution for this?
If you are never wanting the user to select the scatter point (or any scatter points) you can set the zIndex of the series such that the line series is rendered "above" the scatter series. From the docs:
zIndex: Number Define the visual z index of the series.
Defaults to undefined.
With no z index, the series defined last are on top With a z index,
the series with the highest z index is on top
I'm trying to implement distribution histogram in highcharts. That is simple histogram but I want to put percents values as categories between the columns and '0%' in the middle of the middle column. I'm trying to move categories with tick positions and using multiple axis but that doesn't help.
That what I got now, hope that helps to understand what I'm trying to do.
[jsfiddle](http://jsfiddle.net/cwbyyang/)
I need to move '-25%', '-10%', '-5%', '5%', '10%', '25%' to ticks grid lines.
It doesn't make sense with the numbers given (the distance between 0 and 5% is 1.5 times the distance between 5 and 10%), but using three x axes and the x property of the labels, this is possible.
example:
http://jsfiddle.net/cwbyyang/2/
labels: {
x:-40
}
I am using highcharts for the first time, and I am trying to figure out how to set the Y axis points static.I would like to know how to set y-axis values as -0.0000000001,0.00000000,0.0000000001 and so on in Highcharts.
I have used min=-0.0000000005 and max=0.0000000005 , and the points on y axis come up as 0,0.0000,0.0000... Wherein I want it as -0.0000000001,0.00000000,0.0000000001
You can use label formatter and Highcharts numberFormat then return correct values.