I use the following command that works in imagemagick to get the mean of a picture
identify -format "%[mean]" photo.jpg
the same command does not work under graphicsmagick. Is there an equivalent I can use?
You can do this, for example:
gm identify -verbose photo.jpg | grep -E "Mean|Red|Green|Blue"
Or, if you want Red, Green and Blue as 3 separate integers
gm identify -verbose photo.jpg | awk '/Mean:/{s=s int($2) " "} END{print s}'
0 29 225
Or, if you want the average of all channels, like this:
gm identify -verbose photo.jpg | awk '/Mean:/{n++;t+=$2} END{print int(t/n)}'
85
Related
I have following images:
img01.png
img02.png
When I run tesseract img01.png img01.txt -l eng --psm 7 I get the texts
7.819 0 for the first image and
10.024 for the second one.
The second result is correct. However, in the first image, it is an o and not a zero.
How can I make Tesseract recognize o as o?
Update 1: I tried using the --oem 1 option as suggested in this answer (tesseract --oem 1 img01.png img01-ocred -l eng --psm 7), but it did not help.
Update 2: Binarizing the image using magick img01.png +dither -colors 3 -colors 2 -colorspace gray -normalize img01-binarized.png also didn't help. the binarized image looks like this:
You just need to enlarge the image twice the original then use tesseract.
wget https://i.stack.imgur.com/bSO87.png
identify -format "%wx%h" bSO87.png
40x20
tesseract -l eng --oem 3 --psm 6 bSO87.png stdout
7.819 0
convert bSO87.png -resize 80x40 bSO87.png
identify -format "%wx%h" bSO87.png
80x40
tesseract -l eng --oem 3 --psm 6 bSO87.png stdout
7.819 o
I need to get a string that consists of the information from the image's EXIF meta data. For example, I would like:
CameraModel, Focal Length in 35mm Format: 24mm, F11, 1/500, ISO 200
I could see all the information present from
identify -format '%[EXIF:*]' image.jpg
However, I'm having trouble consolidating the output and generate the information.
The first problem, while '%[EXIF:*]' prints all EXIF data, if I replace the star with a specific EXIF tag, it doesn't print out anything. I know I could simply print out all EXIF data a few times and use grep to get the one I need, then combine them together, but it feels better to retrieve just the value I'm looking for.
The second problem, the aperture value FNumber is in a format like "63/10", but I need it to be 6.3; Annoyingly, the shutter speed ExposureTime is like 10/5000 and I need it to be 1/500. What kind of conversion do I need for each case?
Thanks!
Here is something to get you started using awk to look for the EXIF keywords and save the corresponding setting as they go past. Then at the END it prints all it found:
#!/bin/bash
identify -format '%[EXIF:*]' a.jpg | awk -F= '
/^exif:Model/ {model=$2}
/^exif:FocalLengthIn35mmFilm/ {focal=$2}
/^exif:FNumber/ {f=$2}
/^exif:ExposureTime/ {t=$2}
/^exif:ISOSpeedRatings/ {ISO=$2}
END {
# Check if fNumber is a rational number and refactor if it is
n=split(f,k,"/")
if(n==2){
f=sprintf("%.1f",k[1]/k[2]);
}
# Check if exposure time is a rational number and refactor if it is
n=split(t,k,"/")
if(n==2){
m=int(k[2]/k[1]);
t=sprintf("1/%d",m);
}
print model,focal,f,t,ISO
}' OFS=,
Sample Output
iPhone 4,35,2.8,1/914,80
I have not tested the conversion from rational numbers too extensively... between the festive whiskies...
Even simpler is to use EXIFTOOL directly.
infile="P1050001.JPG"
exiftool -model -FocalLengthIn35mmFormat -FNumber -ExposureTime -ISO "$infile"
Camera Model Name : DMC-FZ30
Focal Length In 35mm Format : 35 mm
F Number : 2.8
Exposure Time : 1/8
ISO : 200
or
infile="P1050001.JPG"
exiftool -csv -model -FocalLengthIn35mmFormat -FNumber -ExposureTime -ISO "$infile"
P1050001.JPG,DMC-FZ30,35 mm,2.8,1/8,200
jzxu wrote: This is fine, too, however, I noticed the parameter
-csv, how do I get rid of the comma and replace them with spaces?
One way on unix is simply to use tr to replace the command with a space as follows:
exiftool -csv -model -FocalLengthIn35mmFormat -FNumber -ExposureTime -ISO "$infile" | tr "," " "
SourceFile Model FocalLengthIn35mmFormat FNumber ExposureTime ISO
P1050001.JPG DMC-FZ30 35 mm 2.8 1/8 200
Or if you do not want the header line:
exiftool -csv -model -FocalLengthIn35mmFormat -FNumber -ExposureTime -ISO "$infile" | tail -n +2 | tr "," " "
P1050001.JPG DMC-FZ30 35 mm 2.8 1/8 200
There may be other internal EXIFTOOL formatting options. See https://sno.phy.queensu.ca/~phil/exiftool/exiftool_pod.html
I am not an expert on EXIFTOOL, so perhaps I have missed something. But I do not see a space delimited output format. However, this makes the output in tab delimited format.
infile="P1050001.JPG"
exiftool -s3 -T -model -FocalLengthIn35mmFormat -FNumber -ExposureTime -ISO "$infile"
DMC-FZ30 35 mm 2.8 1/8 200
So one could use tr to replace tabs with spaces.
exiftool -s3 -T -model -FocalLengthIn35mmFormat -FNumber -ExposureTime -ISO "$infile" | tr "\t" " "
DMC-FZ30 35 mm 2.8 1/8 200
This works fine for me in Imagemagick 6.9.9.29 Q16 Mac OSX.
infile="P1050001.JPG"
cameramodel=`identify -ping -format "%[EXIF:model]" "$infile"`
focallenght35=`identify -ping -format "%[EXIF:FocalLengthIn35mmFilm]" "$infile"`
fnumber1=`identify -ping -format "%[EXIF:FNumber]" "$infile" | cut -d/ -f1`
fnumber2=`identify -ping -format "%[EXIF:FNumber]" "$infile" | cut -d/ -f2`
exptime1=`identify -ping -format "%[EXIF:ExposureTime]" "$infile" | cut -d/ -f1`
exptime2=`identify -ping -format "%[EXIF:ExposureTime]" "$infile" | cut -d/ -f2`
isospeed=`identify -ping -format "%[EXIF:ISOSpeedRatings]" "$infile"`
fnumber=`echo "scale=1; $fnumber1/$fnumber2" | bc`
exptime=`echo "scale=3; $exptime1/$exptime2" | bc`
echo "CameraModel=$cameramodel, FocalLengthIn35mmFilm: $focallenght35 mm, F$fnumber, $exptime sec, ISO $isospeed"
CameraModel=DMC-FZ30, FocalLengthIn35mmFilm: 35 mm, F2.8, .125 sec, ISO 200
Or alternately,
infile="P1050001.JPG"
declare `convert -ping "$infile" -format "cameramodel=%[EXIF:model]\n focallenght35=%[EXIF:FocalLengthIn35mmFilm]\n fnumber=%[EXIF:FNumber]\n exptime=%[EXIF:ExposureTime]\n isospeed=%[EXIF:ISOSpeedRatings]\n" info:`
fnumber1=`echo $fnumber | cut -d/ -f1`
fnumber2=`echo $fnumber | cut -d/ -f2`
fnumber=`echo "scale=1; $fnumber1/$fnumber2" | bc`
exptime1=`echo $exptime | cut -d/ -f1`
exptime2=`echo $exptime | cut -d/ -f2`
exptime=`echo "scale=0; $exptime2/$exptime1" | bc`
echo "CameraModel=$cameramodel, FocalLengthIn35mmFilm: $focallenght35 mm, F$fnumber, 1/$exptime sec, ISO $isospeed"
CameraModel=DMC-FZ30, FocalLengthIn35mmFilm: 35 mm, F2.8, 1/8 sec, ISO 200
I have a directory of images and need to merge those images horizontally in groups of two, then save the output of each to a new image file:
image-1.jpeg
image-2.jpeg
image-3.jpeg
image-4.jpeg
image-5.jpeg
image-6.jpeg
Using Imagemagick via command line, is there a way to loop through every other image in a directory and run magick convert image-1.jpeg image-2.jpeg +append image-combined-*.jpg?
So the result would be combined pairs of images:
image-1.jpeg image-2.jpeg -> image-combined-1.jpg
image-3.jpeg image-4.jpeg -> image-combined-2.jpg
image-5.jpeg image-6.jpeg -> image-combined-3.jpg
Get them all appended succinctly and in parallel with GNU Parallel and actually use all those lovely CPU cores you paid Intel for!
parallel -N2 convert {1} {2} +append combined-{#}.jpeg ::: *jpeg
where:
-N2 says to take two files at a time
{1} and {2} are the first two parameters
{#} is the sequential job number, and
::: demarcates the start of the parameters
If your CPU has 8 cores, GNU Parallel will run 8 converts at once, unless you specify say 4 jobs at a time by adding -j4.
If you are learning and just finding your way with GNU Parallel add:
--dry-run so you can see what it would do without actually doing anything
-k to keep the outputs in order
So, I mean:
parallel --dry-run -k -N2 convert {1} {2} +append combined-{#}.jpeg ::: *jpeg
Sample Output
convert image-1.jpeg image-2.jpeg +append combined-1.jpeg
convert image-3.jpeg image-4.jpeg +append combined-2.jpeg
convert image-5.jpeg image-6.jpeg +append combined-3.jpeg
On macOS, you can simply install GNU Parallel with:
brew install parallel
If you have thousands, or hundreds of thousands of files, you may run into an error Argument list too long - although this is pretty rare on macOS because the limit is 262,144 characters:
sysctl -a kern.argmax
kern.argmax: 262144
If that happens, you can use this syntax to pipe the filenames in GNU Parallel instead:
find /somewhere -iname "*.jpeg" -print0 | parallel -0 -N2 convert {1} {2} +append combined-{#}.jpeg
If the images are all the same size and orientation, and if your system has the memory to read in all the images in the directory, it can be done as simply as this...
magick *.jpeg -set option:doublewide %[fx:w*2] \
+append +repage -crop %[doublewide]x%[h] +repage image-combined-%02d.jpg
This can be scripted easily using ImageMagick. I could show you how in Unix. But if you have more than 9 images, then you may have to rename with leading zeros, since alphabetically image-10 will come before image-2. You do not mention your IM version or platform and scripting will differ depending upon OS.
Here is a Unix solution. I have images rose-01.jpg ... rose-06.jpg in folder test on my desktop (Mac OSX). Each image has a label under it with its filename so we can keep track of the files.
cd
cd desktop/test
arr=(`ls *.jpg`)
num=${#arr[*]}
for ((i=0; i<num; i=i+2)); do
j=$((i+1))
k=$((i+2))
magick ${arr[$i]} ${arr[$j]} +append newimage_${j}_${k}.jpg
done
Note that arrays start with index 0. So I use j=i+1 and k=i+2 for the images that correspond to 1,2 3,4 5,6 in the filenames from ls in the array.
The result is (newimage_1_2.jpg, newimage_3_4.jpg, newimage_5_6.jpg)
An alternate solution is to montage all the images together two-by-two as an array of 2x3 and then equally crop them into 3 sections vertically. So in ImageMagick, this also works since these images are all the same size.
cd
cd desktop/test
arr=(`ls *.jpg`)
num=${#arr[*]}
num2=`magick xc: -format "%[fx:ceil($num/2)]" info:`
magick montage ${arr[*]} -tile 2x -geometry +0+0 miff:- | magick - -crop 1x3# +repage newimage.jpg
The results are: newimage-0.jpg, newimage-1.jpg, newimage-2.jpg
Ole Tang wrote:
Fails on filenames like My summer photo.jpg
So here is the solution using ImageMagick as modified from my original post.
Images:
rose 1.png
rose 2.png
rose 3.png
rose 4.png
rose 5.png
rose 6.png
OLDIFS=IFS
IFS=$'\n'
arr=(`ls *.png`)
for ((i=0;i<6;i++)); do
echo "${arr[$i]}"
done
IFS=OLDIFS
num=${#arr[*]}
for ((i=0; i<num; i=i+2)); do
j=$((i+1))
k=$((i+2))
magick "${arr[$i]}" "${arr[$j]}" +append newimage_${j}_${k}.jpg
done
This produces:
newimage_1_2.jpg
newimage_3_4.jpg
newimage_5_6.jpg
I want to get screenshot of each page of a pdf into jpg. To do this I am using ImageMagick's convert command in command line.
I have to achieve the following -
Get screenshots of each page of the pdf file.
resize the screenshot into 3 different sizes (small, med and preview).
store the different sizes in different folders (small, med and preview).
I am using the following command which works, however, it is slow. How can I improve its execution time or execute the commands parallely.
convert -density 400 -quality 100 /input/test.pdf -resize 170x117> -scene 1 /small/test_%d_small.jpg & convert -density 400 -quality 100 /input/test.pdf -resize 230x160> -scene 1 /med/test_%d_med.jpg & convert -density 400 -quality 100 /input/test.pdf -resize 1310x650> -scene 1 /preview/test_%d_preview.jpg
Splitting the command for readability
convert -density 400 -quality 100 /input/test.pdf -resize 170x117> -scene 1 /small/test_%d_small.jpg
convert -density 400 -quality 100 /input/test.pdf -resize 230x160> -scene 1 /med/test_%d_med.jpg
convert -density 400 -quality 100 /input/test.pdf -resize 1310x650> -scene 1 /preview/test_%d_preview.jpg
Updated Answer
I see you have long, multi-page documents and while my original answer is good for making multiple sizes of a single page quickly, it doesn't address doing pages in parallel. So, here is a way of doing it using GNU Parallel which is available for free for OS X (using homebrew), installed on most Linux distros and also available for Windows - if you really must.
The code looks like this:
#!/bin/bash
shopt -s nullglob
shopt -s nocaseglob
doPage(){
# Expecting filename as first parameter and page number as second
# echo DEBUG: File: $1 Page: $2
noexten=${1%%.*}
convert -density 400 -quality 100 "$1[$2]" \
-resize 1310x650 -write "${noexten}-p-$2-large.jpg" \
-resize 230x160 -write "${noexten}-p-$2-med.jpg" \
-resize 170x117 "${noexten}-p-$2-small.jpg"
}
export -f doPage
# First, get list of all PDF documents
for d in *.pdf; do
# Now get number of pages in this document - "pdfinfo" is probably quicker
p=$(identify "$d" | wc -l)
for ((i=0;i<$p;i++));do
echo $d:$i
done
done | parallel --eta --colsep ':' doPage {1} {2}
If you want to see how it works, remove the | parallel .... from the last line and you will see that the preceding loop just echoes a list of filenames and a counter for the page number into GNU Parallel. It will then run one process per CPU core, unless you specify -j 8 if you want say 8 processes to run in parallel. Remove the --eta if you don't want any updates on when the command is likely to finish.
In the comment I allude to pdfinfo being faster than identify, if you have that available (it's part of the poppler package under homebrew on OS X), then you can use this to get the number of pages in a PDF:
pdfinfo SomeDocument.pdf | awk '/^Pages:/ {print $2}'
Original Answer
Something along these lines so you only read it in once and then generate successively smaller images from the largest one:
convert -density 400 -quality 100 x.pdf \
-resize 1310x650 -write large.jpg \
-resize 230x160 -write medium.jpg \
-resize 170x117 small.jpg
Unless you mean you have, say, a 50 page PDF, and you want to do all 50 pages in parallel. If you do, say so, and I'll show you that using GNU Parallel when I get up in 10 hours...
Is there a way to return image profile with image magick command identify or some other command?
For example I have an image kitchen.jpg. This image has profile Euroscale Coated v2. I can see that by running identify -verbose kitchen.jpg.
...
signature: ff8c7f0b6159ca8b63507c0a0eac0af64d639b19e871e13163fb53746a4c4ddd
xapMM:DerivedFrom:
Profiles:
Profile-exif: 4869 bytes
Profile-icc: 557164 bytes
Euroscale Coated v2
Profile-iptc: 7 bytes
unknown[2,0]:
Profile-xmp: 7501 bytes
Artifacts:
verbose: true
...
I tried identify -verbose wohnbereih_original.tif | grep 'Profile-icc' and it returns Profile-icc: 557164 bytes but than I don't now how to return next line.
Try this
identify -verbose wohnbereih_original.tif | grep -A 2 'Profile-icc'
Try This
identify -format %[profile:icc] wohnbereih_original.tif
I did my research how to detect / identify ICC profile with imagemagick and reached this question.
Then, I found out
identify -format %[profile:icc] wohnbereih_original.tif
will available in imagemagick since version 6.8.7.2 (ref: http://www.imagemagick.org/discourse-server/viewtopic.php?t=24385
and http://www.imagemagick.org/discourse-server/viewtopic.php?t=24286)
For previous versions,
identify -verbose wohnbereih_original.tif | grep -A 2 'Profile-icc'
is a lifesaver.