Related
I cannot launch the simulator successfully. Once I launch the IOS Simulator this error appears:
"Unable to boot the IOS Simulator."
Following the IOS Simulator error, I then get an error from Xcode reading:
Unable to run app in Simulator
An error was encountered while running (Domain = DTiPhoneSimulatorErrorDomain, Code = 2)
UPDATE:
This might sound silly but I went to Xcode/preference/Downloads with intentions of seeing a IOS 8.0 Simulator but there was none. Could this be the problem? Am I suppose to have a IOS 8.0 Simulator? If so can someone direct me how to get it? Also, under the "Downloads" tab in Xcode preference I do see IOS 7.0 and 7.1 Simulators and both work fine with Xcode 5.
the trick is, to select the right command line tools!
just select it here
reboot(!) and everything is fine again :-)
Ok It's known problem. Do you see simulators list? If not
Goto Xcode Menu -> Open Developer Tool -> It will open a simulator in your Dock -> click on simulator then go to Simulator Menu: Hardware -> Device -> Manage Devices. Add needed simulators. Always try to run your app with different simulators.someone will work.
Restart your Mac. I just had that exact error after installing Xcode 6 beta 7, literally the only thing I did in response was reboot my Mac and now the iOS 8 simulator is working.
This error is common if you update Xcode without restarting afterwards.
In my case, i reset ios simulator settings fix it.
iOS Simulator -> Reset Content and Settings ...
Open Xcode 6 beta
Goto Window > Devices
Click on the little + sign at the bottom
Add (if missing) all the devices that you want, or delete and recreate if not working.
If anyone of the simulator is not working then you can delete it and then re-create it again in this menu.
I saw the same issue when I installed Xcode 6 beta 6, and deleted beta 4 and beta 5. Apparently, deleting the old betas also deleted the iOS Simulator 8 versions! Putting it back from my Trash solved the issue.
Solution: Don't delete old beta software!
Edit: #Flori's solution worked. Was able to delete the old beta software, and after a complete system reboot, it worked again.
From the xCode 6 pull down menus, Xcode > Open Developer Tool >
iOS Simulator (if you get a pop up error just dismiss it)
Once in the Simulator go to Hardware > Device > Manage Devices.
Delete everything listed under simulator.
Reboot your machine.
After that, navigate back to Manage Devices in the simulator and click the plus to add back your simulators. Then the iOS 8 simulators will show up.
Just unset DYLD_INSERT_LIBRARIES environment variable in the /etc/launchd.conf or ~/.launchd.conf file. Which you can edit by sudo vi /etc/launchd.conf command. remove the above flag save it by "ZZ" (captial Z) and reboot the system. It works like a charm.
Make sure that path in menu XCode>Preference>Locations point to XCode 6.0 (Restart Xcode after changing them). Then go to menu Window>Devices and add simulator devices you want to use.
Edit: Turns out I was getting my version of the error because I had a file (the "Empty File" type) named "Frameworks" in several of my projects, and this was causing big issues with the iOS 8 simulators. Renaming the file to be anything else, and then doing a Clean Build Folder fixed it right away.
------Deprecated Original Message Below--------
In case this helps anyone -- I was having a similar error on Xcode 6 GM, and tried everything mentioned in these Answers, but the iOS 8 simulators would never run any of my apps (no problems with iOS 7 running from Xcode 6 though).
What did sort of work was creating a new project (new project apps would run in the iOS 8 simulators, but never any luck with existing apps). Copying over files and project settings is no fun, but at least it let me do testing and see if my apps needed fixing for the iOS 8 public release.
Extended description of problem at https://devforums.apple.com/thread/246751
I tried everything mentioned above and nothing worked.
Finally the only way to make it work was unsetting DYLD_INSERT_LIBRARIES=/usr/lib/libimckit.dylib
How I did this:
Open terminal and typing "sudo vi /etc/launchd.conf"
Changing
"setenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
to
"unsetenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
Save changes
Reboot your system
In this post [1] explain what DYLD_INSERT_LIBRARIES is for
[1] https://stackoverflow.com/a/26053165/2091181
I got this issue when moving from Beta 6 to Beta 7. Very frustrating. I could reset content and settings on any of the iOS 8 simulators. None of my iOS 8 simulators were working at all, just a black screen. I restarted my machine during the process, but I am not sure if it did anything. Initially I had only iOS 8 Simulators. I had to remove and reinstall Xcode6Beta7. I did not get the Install More Components the first time I installed it, I am not sure if that was the missing part. I installed the iOS 7 Simulators from Settings->Downloads because my iOS8 ones were not working. After I had reinstalled and relaunched the simulator, I then had a list of iOS 6,7,& 8 simulators. None of the iOS 8 Simulators were working. I was able to launch the iOS7 simulator and then using the device menu change to an iOS 8 Simulator. Some still did not work, I had to remove them and re-add them in the devices screen.
Remove XCode6Beta from Applications.
Restart Machine (Just in case, this seems to solve some peoples issue completely)
Install XCode6Beta.
Verify the Install Additional Components ran.
Launch Xcode6Beta.
Preferences->General->Change Command Line Tools to Xcode 6.0.
Restart Xcode.
Preferences->Downloads->Download iOS 7 Simulator (If not already downloaded).
Run App on iOS 7 Simulator (Or launch iOS Simulator and switch to iOS 7 device)
If the iOS 7 Simulator is working, Hardware->Devices->Select an iOS 8 simulator.
Delete and recreate any non working iOS 8 Simulators in Window->Devices from Xcode.
I wrestled with this for a bit, with the simulator app reporting that it couldn't find the iOS8 simulator, and suggesting updating in Prefs/Downloads, which didn't work. I tried re-installing Beta 6 twice (without removing all the support files, which would have been next). The initial installation described itself as build 6A280c; a fresh download yielded build 6A280e. No luck.
Eventually, I opened Window -> Devices, and used the "+" button in the lower left to add a new simulator for iPhone 5s, iOS 8, naming it "Fresh 5s". The Schemes popup now displayed three iPhone 5S/iOS 8 options (none with the name I designated, but differentiated by UUIDs); at least one of them worked.
I'm guessing that this feature (collections of arbitrary simulator instances) will be very useful when it's baked. In the meantime, I guess I'll need to manage the list of simulators manually.
Do following steps worked for me:
1. Launch the iOS Simulator and go to iOS Simulator --> Reset Content and Settings...
2. Close all the applications and restart your mac
3. Open Xcode6.0.1 or 6.0 and test the iOS Simulator
Had the same problem after moving from Xcode 6 beta 5 to beta 6, but also for the iOS 7.1 simulator. Restarting my machine seemed to do the job. I did not need to update from Xcode 5.1.1 CLT to Xcode 6.0 CLT.
I tried all of the solutions above, and was still unable to launch the iOS8 Simulator. The iOS7 Simulators all launched fine.
Looking at the Console, I found that the launch was crashing, and the crash log complained about the dynamic library, libimckit.dylib. You can read about that here:
https://discussions.apple.com/thread/5781366?start=0&tstart=0
The quick solution, remove that and its partner library, reboot, and it loads.
Is there anything interesting in ~/Library/Logs/CoreSimulator/CoreSimulator.log?
The "Unable to boot the iOS Simulator." error message is almost always because launchd_crashed because DYLD_INSERT_LIBRARIES was set to something not compatible with the iOS Simulator runtime. Do you have any crash logs (eg: launchd_sim crashes) in ~/Library/Logs/DiagnosticReports? If so, check if they show DYLD_INSERT_LIBRARIES being set. If that's the case, your options are to either update to an OS X Yosemite host (which will deal with this issue) or unset DYLD_INSERT_LIBRARIES (likely set in /etc/launchd.conf or ~/.launchd.conf)
Force Quit All the apps including xcode and simulator
Restart MAC
Checking in the "Locations" Xcode preference, I had two items of the same version, one located in the app translocation area (/var/.../AppTranslocation/...). Also I had previously done a manual command line tools install. To resolve this in the end I had to delete /Applications/Xcode.app and remove the manual command line tools install:
sudo rm -rf /Library/Developer/CommandLineTools
Then installed Xcode anew, and rebooted. Boom! Simulator working again.
Reboot your mac os. its working correctly on xcode 11.3.x and mac os 10.14.6.
I'm having weird problem in XCode6 beta6. In preferences, downloads there is only one simulator (iOS8) showing as downloaded. No other simulators available.
In addition trying to execute my project on simulator causes this same error mentioned in another question: Unable to run app in Simulator : Xcode beta 6 iOS 8
Removing simulators and adding them back seems to crash Xcode most of the time but even if successful the simulator won't run. Rebooting the machine doesn't help either.
Anyone having similar problems and solution?
I cannot launch the simulator successfully. Once I launch the IOS Simulator this error appears:
"Unable to boot the IOS Simulator."
Following the IOS Simulator error, I then get an error from Xcode reading:
Unable to run app in Simulator
An error was encountered while running (Domain = DTiPhoneSimulatorErrorDomain, Code = 2)
UPDATE:
This might sound silly but I went to Xcode/preference/Downloads with intentions of seeing a IOS 8.0 Simulator but there was none. Could this be the problem? Am I suppose to have a IOS 8.0 Simulator? If so can someone direct me how to get it? Also, under the "Downloads" tab in Xcode preference I do see IOS 7.0 and 7.1 Simulators and both work fine with Xcode 5.
the trick is, to select the right command line tools!
just select it here
reboot(!) and everything is fine again :-)
Ok It's known problem. Do you see simulators list? If not
Goto Xcode Menu -> Open Developer Tool -> It will open a simulator in your Dock -> click on simulator then go to Simulator Menu: Hardware -> Device -> Manage Devices. Add needed simulators. Always try to run your app with different simulators.someone will work.
Restart your Mac. I just had that exact error after installing Xcode 6 beta 7, literally the only thing I did in response was reboot my Mac and now the iOS 8 simulator is working.
This error is common if you update Xcode without restarting afterwards.
In my case, i reset ios simulator settings fix it.
iOS Simulator -> Reset Content and Settings ...
Open Xcode 6 beta
Goto Window > Devices
Click on the little + sign at the bottom
Add (if missing) all the devices that you want, or delete and recreate if not working.
If anyone of the simulator is not working then you can delete it and then re-create it again in this menu.
I saw the same issue when I installed Xcode 6 beta 6, and deleted beta 4 and beta 5. Apparently, deleting the old betas also deleted the iOS Simulator 8 versions! Putting it back from my Trash solved the issue.
Solution: Don't delete old beta software!
Edit: #Flori's solution worked. Was able to delete the old beta software, and after a complete system reboot, it worked again.
From the xCode 6 pull down menus, Xcode > Open Developer Tool >
iOS Simulator (if you get a pop up error just dismiss it)
Once in the Simulator go to Hardware > Device > Manage Devices.
Delete everything listed under simulator.
Reboot your machine.
After that, navigate back to Manage Devices in the simulator and click the plus to add back your simulators. Then the iOS 8 simulators will show up.
Just unset DYLD_INSERT_LIBRARIES environment variable in the /etc/launchd.conf or ~/.launchd.conf file. Which you can edit by sudo vi /etc/launchd.conf command. remove the above flag save it by "ZZ" (captial Z) and reboot the system. It works like a charm.
Make sure that path in menu XCode>Preference>Locations point to XCode 6.0 (Restart Xcode after changing them). Then go to menu Window>Devices and add simulator devices you want to use.
Edit: Turns out I was getting my version of the error because I had a file (the "Empty File" type) named "Frameworks" in several of my projects, and this was causing big issues with the iOS 8 simulators. Renaming the file to be anything else, and then doing a Clean Build Folder fixed it right away.
------Deprecated Original Message Below--------
In case this helps anyone -- I was having a similar error on Xcode 6 GM, and tried everything mentioned in these Answers, but the iOS 8 simulators would never run any of my apps (no problems with iOS 7 running from Xcode 6 though).
What did sort of work was creating a new project (new project apps would run in the iOS 8 simulators, but never any luck with existing apps). Copying over files and project settings is no fun, but at least it let me do testing and see if my apps needed fixing for the iOS 8 public release.
Extended description of problem at https://devforums.apple.com/thread/246751
I tried everything mentioned above and nothing worked.
Finally the only way to make it work was unsetting DYLD_INSERT_LIBRARIES=/usr/lib/libimckit.dylib
How I did this:
Open terminal and typing "sudo vi /etc/launchd.conf"
Changing
"setenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
to
"unsetenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
Save changes
Reboot your system
In this post [1] explain what DYLD_INSERT_LIBRARIES is for
[1] https://stackoverflow.com/a/26053165/2091181
I got this issue when moving from Beta 6 to Beta 7. Very frustrating. I could reset content and settings on any of the iOS 8 simulators. None of my iOS 8 simulators were working at all, just a black screen. I restarted my machine during the process, but I am not sure if it did anything. Initially I had only iOS 8 Simulators. I had to remove and reinstall Xcode6Beta7. I did not get the Install More Components the first time I installed it, I am not sure if that was the missing part. I installed the iOS 7 Simulators from Settings->Downloads because my iOS8 ones were not working. After I had reinstalled and relaunched the simulator, I then had a list of iOS 6,7,& 8 simulators. None of the iOS 8 Simulators were working. I was able to launch the iOS7 simulator and then using the device menu change to an iOS 8 Simulator. Some still did not work, I had to remove them and re-add them in the devices screen.
Remove XCode6Beta from Applications.
Restart Machine (Just in case, this seems to solve some peoples issue completely)
Install XCode6Beta.
Verify the Install Additional Components ran.
Launch Xcode6Beta.
Preferences->General->Change Command Line Tools to Xcode 6.0.
Restart Xcode.
Preferences->Downloads->Download iOS 7 Simulator (If not already downloaded).
Run App on iOS 7 Simulator (Or launch iOS Simulator and switch to iOS 7 device)
If the iOS 7 Simulator is working, Hardware->Devices->Select an iOS 8 simulator.
Delete and recreate any non working iOS 8 Simulators in Window->Devices from Xcode.
I wrestled with this for a bit, with the simulator app reporting that it couldn't find the iOS8 simulator, and suggesting updating in Prefs/Downloads, which didn't work. I tried re-installing Beta 6 twice (without removing all the support files, which would have been next). The initial installation described itself as build 6A280c; a fresh download yielded build 6A280e. No luck.
Eventually, I opened Window -> Devices, and used the "+" button in the lower left to add a new simulator for iPhone 5s, iOS 8, naming it "Fresh 5s". The Schemes popup now displayed three iPhone 5S/iOS 8 options (none with the name I designated, but differentiated by UUIDs); at least one of them worked.
I'm guessing that this feature (collections of arbitrary simulator instances) will be very useful when it's baked. In the meantime, I guess I'll need to manage the list of simulators manually.
Do following steps worked for me:
1. Launch the iOS Simulator and go to iOS Simulator --> Reset Content and Settings...
2. Close all the applications and restart your mac
3. Open Xcode6.0.1 or 6.0 and test the iOS Simulator
Had the same problem after moving from Xcode 6 beta 5 to beta 6, but also for the iOS 7.1 simulator. Restarting my machine seemed to do the job. I did not need to update from Xcode 5.1.1 CLT to Xcode 6.0 CLT.
I tried all of the solutions above, and was still unable to launch the iOS8 Simulator. The iOS7 Simulators all launched fine.
Looking at the Console, I found that the launch was crashing, and the crash log complained about the dynamic library, libimckit.dylib. You can read about that here:
https://discussions.apple.com/thread/5781366?start=0&tstart=0
The quick solution, remove that and its partner library, reboot, and it loads.
Is there anything interesting in ~/Library/Logs/CoreSimulator/CoreSimulator.log?
The "Unable to boot the iOS Simulator." error message is almost always because launchd_crashed because DYLD_INSERT_LIBRARIES was set to something not compatible with the iOS Simulator runtime. Do you have any crash logs (eg: launchd_sim crashes) in ~/Library/Logs/DiagnosticReports? If so, check if they show DYLD_INSERT_LIBRARIES being set. If that's the case, your options are to either update to an OS X Yosemite host (which will deal with this issue) or unset DYLD_INSERT_LIBRARIES (likely set in /etc/launchd.conf or ~/.launchd.conf)
Force Quit All the apps including xcode and simulator
Restart MAC
Checking in the "Locations" Xcode preference, I had two items of the same version, one located in the app translocation area (/var/.../AppTranslocation/...). Also I had previously done a manual command line tools install. To resolve this in the end I had to delete /Applications/Xcode.app and remove the manual command line tools install:
sudo rm -rf /Library/Developer/CommandLineTools
Then installed Xcode anew, and rebooted. Boom! Simulator working again.
Reboot your mac os. its working correctly on xcode 11.3.x and mac os 10.14.6.
I am currently experiencing problems launching the Xcode 6 Beta 3 Simulator. Once I launch the IOS Simulator the error "Unable to boot the IOS Simulator." appears. Following the IOS Simulator error, I then get an error from xcode reading "Unable to run app in Simulator An error was encountered while running (Domain = DTiPhoneSimulatorErrorDomain, Code = 2)".
I went to Xcode/preference/Downloads with intentions of seeing a IOS 8.0 Simulator but there was none. Could this be the problem? Am I suppose to have a IOS 8.0 Simulator? If so can someone direct me how to get it? Also, under the "Downloads" tab in Xcode preference I do see IOS 7.0 and 7.1 Simulators and both work fine with Xocde 5.
Reset Content and Settings in iOS Simulator, close it, and then build again.
I just downloaded Xcode 6 & played with it a bit.
After switching back to previous version of Xcode and running in simulator, I keep getting this error.
Unable to determine simulator device to boot.
How do we resolve this?
Thanks in advance.
Make sure you have only one iOS Simulator instance running in the Dock.
There was a simple answer to this for me:
Open the simulator via Xcode -> Open Developer Tool -> iOS simulator (even if it can't launch, the app will be open).
With the simulator app open, go to Hardware -> Device -> Manage Devices.
Add any missing simulators with the plus button (all of mine were missing for some reason).
I've faced same issue and solved by below steps:
1) Move xcode6-beta into application folder
2) Restart mac and open xcode6-beta from application folder.
I had the same problem when running from Xcode 6 beta selecting iPhone 5s. If I choose iPhone 5 or "resizable iPhone" then my app launches fine.
You will not see the profiles of simulator without a rebooting of OS X.I added simulator for many times,when the rebooting finished, it shows on the device list under the simulator bar. I think this is a bug of Xcode 6 Beta
I think you have 2 simulator running in the dock. Please close another one simulator and run the project again. It might helpful for you.
In my case I had such a message just because the simulated device was still booting (longer than usually, I guess). Xcode 7.2.
(This is not actually an answer to this specific question, but I came here googling the message in the title, so I am writing my note here for if someone else gets the same case as I did)
My case wasn't about having two simulators open. It was just because having instruments open as well. Closing Instruments resolved the issue
I just fixed the exact same problem by removing the beta version and rebooting the computer.