I've noticed that calling hh_client is not always returning correct result. For example: I have following pieces of code:
backend\ConvertMessage.hh:
<?hh // strict
namespace ApiBackend\ConvertMessage {
enum Status: int {
success = 0;
// ... error codes
};
// ... some other classes
};
other place in project:
throw new \SoapFault(
'Server',
\ApiBackend\ConvertMessage\Status::getNames()[$result->status]
);
Sometimes, after doing some changes in project I get following error message: Could not find static method getNames in type ApiBackend\ConvertMessage\Status (Typing[4090])
When I remove a semicolon after one of closing curly brackets, hh_client stops displaying error. But when I insert semicolon back on its place, typechecker still gives me No errors! message.
This is not the only file that causes this problem - it happens to all enums.
It seems to me that it is problem with some cache of either hh_client or hh_server.
Thanks in advance for helping me with solving this problem (and sorry if my english is not too good).
You are probably using an outdated version of HHVM. This problem sounds an awful lot like this race condition, which was fixed in HHVM 3.5.0 and newer (and was backported into the 3.3.3 LTS release). Notably, 3.4.x still had the bug.
What version of HHVM are you using?
Related
I develop my application with Dart and Polymer on PyCharm. I currently have an error :
Exception: type 'ObservableList<DrugFilterItem>' is not a subtype of type 'ObservableList<DrugCompareItem>' of '__$orderFilterList#51385934'
ObservableList is from package:observe/src/observable_list.dart
DrugFilterItem is from package:synmed/drug_elements/views/drug_filter_menu.dart
ObservableList is from package:observe/src/observable_list.dart
DrugCompareItem is from package:synmed/drug_elements/views/drug_search_toolbar.dart
DrugFilterItem and DrugCompareItem are both custom classes, DrugCompareItem extends DrugFilterItem, and the line designed by the error is :
ObservableList<DrugCompareItem> orderFilterList = new ObservableList<DrugFilterItem>();
The problem suddenly happened today : I installed Pycharm 2016.3 and tried to code, but I had an error with the package shadow, which I solved. Since, I have this error which I supposed came from a problem with the packages as the code didn't change from before to after.
What I have found for now is nothing in fact, I read a lot of post on this kind of error, one of the recurrent subject was the imports but I didn't find any problem with this. I am using Dart 1.20.1 and
polymer: "<=0.16.4+1"
core_elements: "<=0.7.1+3"
paper_elements: "<=0.7.1"
Do anyone has any clue for me? Thanks!
Sounds like https://github.com/dart-lang/sdk/issues/14972#issuecomment-108402835
I believe this is working as intended. A List is not assignable to a List, even if it only contains Apples.
There are several ways to work around this:
iterable.map((x) => x) (removing the generic type),
new List<MethodMirror>.from(iterable)
new MyIterableWrapper<MethodMirror>(iterable) (where the iterable-wrapper that would need to be written).
I'm using this code to loop columns of a SharePoint 2013 List.
currentContext.Load(currentList.Fields);
currentContext.ExecuteQuery();
foreach (Field f in currentList.Fields) {
}
No problem with normal columns. But, when I arrive to a lookup column I have this error:
"Unable to cast object of type
'System.Collections.Generic.Dictionary`2[System.String,System.Object]'
to type 'Microsoft.SharePoint.Client.Field'."
I found for example this discussion
This issue came when we were working with TaxonomyFieldValue fields. For us changing references was not an option. This helped:
TaxonomyItem dummy = new TaxonomyItem(web.Context, null);
It will force program to load adequate libraries forcing correct type in runtime.
I had this same issue and updating the references fixed it for me. This question helped me figure it out.
I went from version 14 of "Microsoft.SharePoint.Client" and "Microsoft.SharePoint.Client.Runtime" to version 16 and no longer had the error.
Latest client download
I'm having problems with a specific line of code - building.transmitter:[operation](player, unpack({...})) that causes an error in Corona, yet this loads fine when it's run in Lua separately. I suspect it has something to do with the : being placed before the [operation] variable but I'm clueless why.
Specifically the module is written as,
local activate = {}
local function activate.transmitter(player, operation, ...)
building = player:getTile()
building.transmitter:[operation](player, unpack({...}))
end
return activate
The runtime errror that is appearing gives me
"error loading module from file, '<name>' expected near '['"
Edit - WOW! I didn't notice that when troubleshooting this in Corona I changed some of the lines of code to identify the problem. I then mistakenly tested the edited code in Lua and it ran fine. I didn't realize the code wasn't the original until siffiejoe pointed out the interpreter getting an error as well. Sorry for the mistake.
maybe Corona uses older version of Lua which does not support this syntax. You can try workaround instead of
building.transmitter:[operation](player, unpack({...}));
you can call
building.transmitter[operation](building.transmitter, player, unpack({...}));
I'm not sure why, but on my Emacs 24.3.50.1 (x86_64-pc-linux-gnu, GTK+ Version 3.8.4) css-mode is not loading and with M-x css-mode gives this error in Messages:
Symbol's function definition is void: apropos-macrop
or
File mode specification error: (void-function apropos-macrop)
my css file (ending in .css) is in Fundamental. I just tried it on a 23.1.1 and CSS mode comes up and works fine.
Update: Traced problem to my autoloads. i.e., comment out autoloads
;(load "~/modes/autoloads" 'install)
and the problem goes away. I'm not sure what to hack with an autoloads file. Any way to "step" through an autoloads? Here's my autoloads: http://gmcongo.org/temp/autoloads
In Emacs 24.4 and the bleeding edge versions leading to it (like 24.3.50+), apropos-macrop has been replaced by macrop. In css-mode.el, replace the call to apropos-macrop with a call to macrop and the error goes away.
Building upon the existing correct answer, you can create an alias in your ~/.emacs instead of editing css-mode (if for example, it came in a package with your distribution):
;; For css-mode, temporarily.
(defalias 'apropos-macrop 'macrop)
Why I try to run the following OpenCV program, it shows the following error :
ERROR:
test_1.exe - Application Error
The application failed to initialize properly (0x80000003).
Click on OK to terminate the application.
CODE:
#include "cv.h"
#include "highgui.h"
int main()
{
IplImage *img = cvLoadImage("C:\\face.bmp");
cvSetImageROI(img, cvRect(100,100, 100, 100));
cvAddS(img, cvScalar(50), img);
cvResetImageROI(img);
cvShowImage("Test", img);
cvWaitKey(0);
return 0;
}
When i press F5(im using vs2008express), the program encounters a break point...i have attached a picture...dont know, whether, it will help or not.
Error Snapshot Link
It is not that, only this program is producing this error, but also any kind of image manipulation funciton containing (OpenCV)program is resulting in this sitution.
Such as : cvSmooth
one last thing, it there any dedicated OpenCV forum or sth like that?
I am an administrator.So, yes, ive the permission.
a version mismatch.
sorry, i didn't get it?Version mismatch with what?
But, i have found the error using dependency walker.
Warning: At least one module has an unresolved import due to a missing export
function in a delay-load dependent module.
and also found that, it is a common problem, and found some info in the FAQ of DW...
Why am I seeing a lot of applications where MPR.DLL shows up in red under
SHLWAPI.DLL because it is missing a function named WNetRestoreConnectionA?
I also get a "Warning: At least one module has an unresolved import due to
a missing export function in a delay-load dependent module" message.
Function name : WNetRestoreConnectionA
But there is no guideline about how to solve it. Though, they say, it is not a problem.
i googled a little and found a suggestion.It says,
Turn off your compilers setting to assume you are programming for Win9x.
(I just lost which setting but it is not that difficult, use a #define...)
But i have no idea, how to do that in Visual Studio 2008 express.
Any suggestion how to solve it...
This usually indicates a problem with a dll; either you don't have permission, or a version is mismatched. Try running as Administrator to see if it is a permissions problem. If that doesn't help, try using the Dependency Walker.