I am getting these errors in flat file connection manager.
Error: [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Flat File Source returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
I am reletively new to ssis and I am finding it quite hard to figure out the issue. Please let me know your views.
On your flat file connection properties - Look for the property "AlwaysCheckForRowDelimeters" - SET it to FALSE.
Hope that helps.
"An error occurred while skipping data rows" - I had this error in a package and found the problem was reading files inside a for loop. More files matched the criteria than intended, so a file with an invalid schema was also matched.
More generally I think this is related to either the file not matching the connection definition, I have also seen people online saying it is related to the flat file using a text qualifier (i.e. " in a csv) but having no closing quote.
I had this error today, and my package was looking for more files than existed based on the conditions of the for each loop. The text qualifier wasn't the issue causing this particular error.
near the Start button press drop-down menu arrow
choose package_name Debug Properties
than under Configuration Properties open Debugging
than under Debug Options choose Run64BitRuntime and turn it to False
Related
I've recently updated a mapping in Informatica designer which used to work without any problem, I added two columns in the target table, i did some calculation in an expression, then link two-port to the newly created columns in the target table, but when I started the session, after few time I got the error below :
*WRITER_1_*_1 GPWRT_34065 [ERROR] Gpload error: unexpected error -- backtrace written to log file*
note: the data in the new columns don't contain any special characters or delimiter.
problem solved, I have recreated the target table,there was a missing field in the first table. so after adding it, the workflow ran successfully
I am currently editing a PO translation file which is driving me nuts. Every time i save the file in poedit i get this message: "1 issue with the translation found", followed by the default text about the entries that contain the error are marked red. The problem is however, nothing is marked red, not a single entry.
After that initial error another error message follows: "warning header field 'Last-Translator' still has the default initial default value". I don't know what this means. I have compared the properties of the file to other po files and can not seem to find anything wrong with it.
I have been trying all kind of things for hours now, i can't get the file fixed. Maybe someone here has more experience with these files and can help me out?
BTW: The translation partially works, with some entries being translated while others are not.
Link to the file: enter link description here
If luaL_load function fails, then, according to the documentation (Lua5.1), the error message is pushed on the stack and can be retrieved with lua_tostring(L, -1), but if I want to print a customized error message, I don't think I can use lua_Debug (because that is for active function). Is there any other way (other than parsing the string) to get the file, line number and what error occured ?
--
Thanks.
The error code returned by luaL_loadfile tells you what kind of error happened. You're mostly likely only interested in LUA_ERRSYNTAX, in which case there is a detailed error message left on the stack. This is the only record of the error. If you need to reformat it, you need to parse it.
During a luaL_load(), there is nothing techinally on the stack that is relavant to the loading of the script. No functions are performed or executed in the script. Its just a compilation step, returning a function that encapsulates the whole file or the error found during compilation.
If you get a function back, you execute this to actually run the script, which sounds like what you are really interested in. In which case you can use a lua_pcall() and provide an error handler. In your handler you would then have your expected stack trace available via lua_Debug.
when i am doing ant build, every time build got failed due to Unable to delete file xxxx.jarSAVE. But this file is not there in that folder. i am attaching build trace here. Can any one help me for the same.
BUILD FAILED
D:\2.4_BV_BuildArea\aiRES-Comp\Build.xml:162: The following error occurred while executing this line:
D:\2.4_BV_BuildArea\aiRES-Comp\Java\Build.xml:225: The following error occurred while executing this line:
D:\2.4_BV_BuildArea\aiRES-Comp\Java\src\com\ibsplc\iRes\tax\build.xml:127: Unable to delete file D:\2.4_BV_BuildArea\aiRES-Comp\Java\src\com\ibsplc\iRes\tax\dist\iRes_Tax_ejb.jarSAVE
ANT thinks that the name a file it it supposed to delete is iRes_Tax_ejbSAVE. But the actual name of the file which really exists and ANT is supposed to delete is iRes_Tax_ejb.jar
This means its a space issue. In some config or property file there is a whitespace between iRes_Tax_ejb.jar and SAVE is not being picked up.
search for the <delete> tag in all your build.xmls and you'll come to know which file is it picking the name iRes_Tax_ejb.jar to delete from.
Also search for the word SAVE in all your build.xmls
Then go and fix the space. This is tricky sometimes as when you see the text file, space might be visible, but ANT is not able to pick it up due to encoding issues. So you'll have to use the correct editor.
I am trying to create a setup project for a Windows Service. I've followed the directions at http://support.microsoft.com/kb/816169 to create the setup project with no trouble.
I want to be able to get a value during the installation in order to update the app.config with the user's desired settings. I added a Textboxes (A) dialog to retrieve the values. I set the Edit1Property property to "TIMETORUN", and in my Primary Output action's CustomActionData property I put in the following: /TimeToRun="[TIMETORUN]\". So far so good. Running the setup I can retrieve the TimeToRun value from the Context.Parameters collection without issue.
In order to locate the app.config I need to also pass in the value of the TARGETDIR Windows Installer Property to my custom action. This is where things begin to fall apart. In order to achieve this, the above CustomActionData must be altered like so: /TimeToRun="[TIMETORUN]\" /TargetDir="[TARGETDIR]\". Now when I run the setup I get the following error message:
Error 1001. Exception occurred while initializing the installation.
System.IO.FileNotFoundException: Could not load file or assembly 'file:///C:\Windows\SysWOW64\Files' or one of its dependencies. The system cannot
find the file specified.
If you google this problem you will inevitably find people having tremendous success by simply adding the trailing slash to the /TargetDir="[TARGETDIR]\" portion of the CustomActionData. This unfortunately does not solve my issue.
I tried so many different variations of the CustomActionData string and none of them worked. I tried logging to a file from my overridden Install method to determine where the breakage was, but no log file is created because it's not even getting that far. As the error indicates, the failure is during the Initialization step.
I have a hunch that it could be one of the dependencies that the setup project is trying to load. Perhaps somehow something is being appended to the CustomActionData string and isn't playing well with the TARGETDIR value (which contains spaces, i.e. "C:\Program Files\My Company\Project Name"). Again, this is another hunch that I cannot seem to confirm due to my inability to debug the setup process.
One further thing to mention, and yes it's another hunch, could this be an issue with Setup Projects on 64-bit version of Windows? I'm running Windows 7 Professional.
I'll provide names of the dependencies in case it helps:
Microsoft .NET Framework
Microsoft.SqlServer.DtsMsg.dll
Microsoft.SqlServer.DTSPipelineWrap.dll
Microsoft.SqlServer.DTSRuntimeWrap.dll
Microsoft.SQLServer.ManagedDTS.dll
Microsoft.SqlServer.msxml6_interop.dll
Microsoft.SqlServer.PipelineHost.dll
Microsoft.SqlServer.SqlTDiagM.dll
As you may glean from the dependencies, the Windows Service is scheduling a call to a DTSX package.
Sorry for the long rant. Thanks for any help you can provide.
The answer is so maddeningly simple. If the last argument in the CustomActionData is going to contain spaces and thus you have to surround it with quotes and a trailing slash, you must also have a space following the trailing slash, like this:
/TimeToRun="[TIMETORUN]\" /TargetDir="[TARGETDIR]\ "
The solution and explanation can be found here.
Had a similar issue. In my case, it was odd because my installer had ran successfully once, then I uninstalled my app via Add/Remove Programs successfully, did some coding (did NOT touch my CustomActionData string), and rebuilt my project and setup project. It was when I re-ran my MSI that I got this error.
The coding I had done was to bring in more values of more parameters I had been specifying in my CustomActionData string. That syntax for getting the parameter values (i.e. string filepath = Context.Paramenters["filepath"]), which was in my Installer class, was actually fine, but as I found out, the syntax of the later parameters I was now trying to get from my CustomActionData string had not been correct, from the very beginning. I had failed to add a second quote around one of those parameters, so nothing else could be obtained.
I was using the "Textboxes (A)" and "Textboxes (B)" windows in the User Interface section. A has 1 box, EDITA1, where I get the path to a file, and B has 2 boxes, EDITB1 and EDITB2, for some database parameters. My CustomActionData string looked like this:
/filepath="[EDITA1]" /host="[EDITB1] /port="[EDITB2]"
It should have been:
/filepath="[EDITA1]" /host="[EDITB1]" /port="[EDITB2]"
(closing quote on [EDITB1])