I am trying to conditionally format a row in Google Sheets based on the result of a QUERY operation. I can get the QUERY to return the value I want (either 0 or non-zero), however QUERY insists on returning a header row.
Since the QUERY now takes up 2 rows for every row of data, changing the format of the row based off the QUERY result starts to get weird after just a few rows.
The problem I am ultimately trying to solve in the case where I enter a list of names, and I want to compare each name to a list of "NSF Names". If a name is entered, and it exists on the NSF list, I would like to flag the entry by highlighting the row red.
Help is greatly appreciated.
Edit: Formula, as requested:
=query(A:D,"select count(A) where C contains '"&E1&"' and D contains '"&E2&"'")
A:D is the data set (A is a numeric ID, B is full name, C and D are first and last names respectively).
E1 and E2 are placeholders for the person's first and last name, but would eventually be replaced with parsing the person's name, as it's inputted on the sheet (TRIM(LEFT(" ", A2) etc...)
I can get the QUERY to return the value I want (either 0 or non-zero),
however QUERY insists on returning a header row.
There might be better ways to achieve what you want to do, but in answer to this quote:
=QUERY(A:D,"select count(A) where C contains '"&E1&"' and D contains '"&E2&"' label count(A) ''")
A query seems a long-winded approach (=countifs(C1:C7,E$1,D1:D7,E$2) might be adequate) but the label might be trimmed off it by wrapping the query in:
index(...,2)
Related
I am having some difficulties summing up some values in Google Sheets. In my spreadsheet, from multiple other tabs, values and bonuses are combined into one cell (Cell B1 in this example). The format of each "unit" of data is Name,5%xxx (Where "Name" is the name of the item, "5%" represents the sum I want to add, mostly always a percentage, and "xxx" separates one unit from the next). As you can see in cell B1, there are two instances where "Parkour" receives a bonus to sum up (from different sources).
Parkour,5%xxxParkour (Subskill: Sense of Balance),10%xxxParkour,2%xxx
Parkour
0.07
Parkour (Subskill: Sense of Balance)
H2H Combat: Parkour
The formula in cell B2 is:
=IFERROR(SUM(ARRAYFORMULA(IFERROR(VALUE(MID(FILTER(SPLIT(TEXTJOIN("",TRUE,filter(B$1,regexmatch(B$1,$A2)=TRUE)),"xxx"),SEARCH($A2,SPLIT(TEXTJOIN("",TRUE,filter(B$1,regexmatch(B$1,$A2)=TRUE)),"xxx"))),len($A2)+2,1000)),""))),"")
(Dragged down through the rest of the list) (Could not figure out how to make the formula "in line" on the question.)
Expected Results:
B2 = .07 (Working)
B3 = .1 (Not working)
B4 = Blank (Working)
The goal of the formula is to look into cell B1, and split everything out by "xxx". Then, filter the array of items with only exact matches with the line item in column A, then split again by the comma and add up those values. It worked for the first line item, but not the second. (Unsure why, but I strongly believe it has something to do with the parenthesis. When I removed the parenthesis from the name in Column A (and adjusted cell B1 to not have parenthesis), it worked. However, given the structure of the data, parenthesis are required, and I need to find a way for it to work with them.)
When I removed the IFERROR wrap around it in cell B3, I get this error note:
Function SUM parameter 1 expects number values. But " is a text and cannot be coerced to a number.
Any help is greatly appreciated.
You may find useful combining SPLIT with QUERY like this. It will group names and sum percentages:
=QUERY(INDEX (IFERROR(SPLIT(FLATTEN(INDEX(SPLIT(B1:B100,"xxx"))),","))),"SELECT Col1,SUM(Col2) where Col1 is not null group by Col1")
PS: invented a couple of extra line
UPDATE
I've thought you had another goal, try this formula. Having the previous chart generated by QUERY, I used VLOOKUP to match first column and return second one:
=INDEX(IFERROR (VLOOKUP(A2:A,QUERY(INDEX (SPLIT(FLATTEN(SPLIT(B1,"xxx")),",")),"SELECT Col1,SUM(Col2) where Col1 is not null group by Col1"),2,0)))
I'm trying to separate specific rows of data into a new sheet, based on the text string in Column H / 8;
=query({attendees_list!A2:N2},"select Col1,Col2,Col3,Col4,Col5,Col6,Col7,Col8,Col9,Col10,Col11,Col12,Col13,Col14 where Col8='Show1 - Adult (Earlybird Pricing)'",1)
The query is working, in that it returns columns 1-14 from the 'attendees_list' sheet, but it doesn't seem to be applying the "where" condition, as its returning all rows regardless of the Column H value, rather than returning the specified value; 'Show1 - Adult (Earlybird Pricing)')
Here is a document with the example of the issue
https://docs.google.com/spreadsheets/d/1LEISiYnFeOloA5FDmzA3B5fhXVY_YJiivxedR5qurpU/edit?usp=sharing
I've tried different string quote types (ie; ''&"") but I can't figure out the issue.
Any idea where I'm going wrong here?
the issue is in the range A2:N2 <- that's one row and then 3rd query argument set to 1 will treat that single row as a header row and always output it whatever you setup in 2nd query argument
try:
=QUERY({attendees_list!A2:N},
"select Col1,Col2,Col3,Col4,Col5,Col6,Col7,Col8,Col9,Col10,Col11,Col12,Col13,Col14
where Col8 = 'Show1 - Adult (Earlybird Pricing)'", )
I have a Google Form that collects a bunch of data from dropdown questions on a Sheet with each question going to one column (as normal). On separate sheets, I want to be able to count how many times each option is selected.
Here is an example of what the response sheet might look like. A, B, and C are all questions.
I would then have separate sheets for 'Person?', 'Place?', and 'Thing?'. The 'Person?' sheet would look something like this:
I want to be able to add in the count of each time the option appears for that question. In the example, notice that 'Napoleon" is in both Col A and Col C. If I just count the number of times 'Napoleon' appears, I will get '2' even though he only appears once in the "Person?" responses.
I originally used a QUERY function like =QUERY('Input Data'!1:1000, "select count(A) where A contains '"&$A2&"'",0). BUT, I need it to be dynamic. So the "Person?" question may not always be Col A. I want the Query (or whatever formula) to search the headers and only return the count of that option for that question even if the column location changes.
Okay, I figured it out! In case someone else is curious, I used this formula:
=QUERY({'Input Data'!A1:L}, "SELECT COUNT(Col"&MATCH("Person?", 'Input Data'!1:1,0)&") WHERE Col"&MATCH("Person?", 'Input Data'!1:1,0)&" CONTAINS '"&$A2&"' label COUNT(Col"&MATCH("Person?", 'Input Data'!1:1,0)&") ''",0)
Lee, I sent you a PM about your most recent post, but in the process, I came across this one. There is no need for multiple formulas or manual entry references. One formula can produce the entire report with headers, listing and counts:
=IFERROR(QUERY(FILTER(FILTER(A:L,A:A<>""),A1:L1="Person?"),"Select Col1, COUNT(Col1) GROUP BY Col1 ORDER BY Col1 LABEL COUNT(Col1) 'Count'",1),"No Matches")
Just fill in the header your looking for between the quotes where Person? is now.
The double FILTERs mean "Start with only rows where Col A is not null and Row 1 reads 'Person?'"
Then QUERY simply returns the unique names in the left column and their counts in the right column. Because the QUERY had a final parameter of 1, any existing header will be kept (in this case, the one you were searching for); and the created column will receive a header (i.e., LABEL) of Count.
IFERROR will give a friendly error message if no matches are found (in which case check that what you entered for the search in the formula exactly matches a column header in the range).
I can't seem to find the right equation to find a cell from a row that matches only a few specific characteristics. In this example, I am trying to find the equation for Column D which would be the cell in A that has the same cells for B & C.
Hope this makes sense!
I'll provide two options.
If you're sure your data will only ever have zero or one match, you can place the following formula into D2 of an otherwise empty range D2:D...
=ArrayFormula(IF(A2:A="",,SUBSTITUTE(VLOOKUP(B2:B&C2:C,{B2:B&C2:C,A2:A},2,FALSE)&VLOOKUP(B2:B&C2:C,SORT({B2:B&C2:C,A2:A,ROW(A2:A)},3,0),2,FALSE),A2:A,"")))
However, if you think more than one match may turn up and you want "None" to be returned if there is no match, you can use the following formula in D2 or an otherwise empty range D2:D...
=ArrayFormula(IF(A2:A="",,REGEXREPLACE(REGEXEXTRACT(REGEXREPLACE(SUBSTITUTE(VLOOKUP(B2:B&C2:C,TRIM(SPLIT(FLATTEN(QUERY(QUERY({B2:B&C2:C&"~",A2:A&","}, "Select MAX(Col2) where Col2 IS NOT NULL GROUP BY Col2 PIVOT Col1"),, 9^9)),"~")),2,FALSE),A2:A,""),"^[,\s]+$","None"),"([^,\s].+[^,\s])[,\s]*$"),"[,\s]+",", ")))
The second formula will work even if there will only ever be zero or one match; it's just not necessary to have it be that lengthy. And the second formula is only as lengthy because it was unclear from your posted examples whether the data in Col A, B and C will really only ever be one word or not; so the formula is built to assume there will not always be one-word strings in those columns.
Either formula will provide results for the entire column without dragging.
Here's an option, You can use this formula in column D2:
=iferror(textjoin(", ",true,query($A$2:$C,"Select A where A is not null and A != '"&$A2&"' and B = '"&$B2&"' and C = '"&$C2&"'",0)),"None")
Limitation:
You need to manually drag the formula to its succeeding rows. Arrayformula() cannot be used in looping the query string values.
What it does?
Using query(), filter the data from A2:C that has the same current row last name(Column B) and food(Column C) at the same time having a different first name(Column A)
If there are multiple results, use textjoin() to combine them with ", " as its delimiter.
If there is no matched found, it will return an error, hence use iferror() to set the default value to "None"
Output
I have a data set that looks like this: starting on A1 with "1"
1 a
2 b
3 c
4 d
Column A is an arrayformula =arrayformula(row(b1:b))
Column B is manual input
i want to query the database and finding the row of the item by match column B so i have code as such
=query("A1:B","select A where B like '%c%')
this should give me "3"
My question:
is there a way to pull the 1-4 numbers into the query line? with something like array formula row(b1:b). I don't want to waste an extra column on column A
so basically I want just the manual input and when i query it gives me the row number.
No script code please.
I've tried a few things and it didn't work.
Looking for a solutions that starts with
=query()
You can also use a formula to pull in more than one row in the dataset which matches the condition, if this is important to you:
=arrayformula(filter(row(B:B); B:B="c"))
And you can have wildcard type operators, under certain circumstances (you are going to match text or items that can look like text (so numbers can be treated as text - but boolean will need more steps); that the dataset is not huge), using regular expressions. e.g.
=arrayformula(filter(row(B:B); regexmatch(B:B, "(c|d)")))
You could also use standard spreadsheet wildcard operators, e.g.
=arrayformula(filter(row(B:B); countif(B:B, "*c*")))
Explanation: In this case, the filter will be true when countif is greater than zero, i.e. when it sees something with a letter c in it, since spreadsheets see a value greater than zero as a boolean true and so, for that row where there is a countif match, there will be a a filter match, and so it will display that row (indeed, it is a similar situation with the regexmatch creating a true when there is a match of either c or d, in the case above).
Personally, I wanted to learn regex a bit, so I would go towards the regexmatch option. But that is your choice.
You can also, of course, create the match outside of the cell. This makes it easy to create a list of matches that you want to satisfy elsewhere on the sheet. So you could have a column of words or parts of words, from Z2 downwards, and then join them together in cell Z1 for example like this
="("&join("|",filter(Z2:Z50,len(Z2:Z50)))&")"
Then your filter function would look like this:
=arrayformula(filter(row(B:B), regexmatch(B:B, Z1)))
If you want to use like operator in the query function, you can try something like this:
=arrayformula(query(if({1,0}, B:B,row(B:B)),"select Col2 where Col1 like '%c%' "))
You can also use the regular expressions in the query function, for example:
=arrayformula(query(if({1,0}, B:B,row(B:B)),"select Col2 where Col1 matches '(.*c.*|.*d.*)' "))
I'm not entirely clear on the question, but as I understand it, you want to be able to enter a formula, and have it return the row number of the matched item in a range? I'm not sure where array formulas come in.
If I've understood your question correctly, this should do the trick:
=MATCH("C",B1:B,0)
In your example, this returns 3.
Please forgive me if I've misunderstood your question.
Note: If there are multiple matches, this will return the row number for the first instance of your search.
=QUERY({A1:A,ARRAYFORMULA(ROW(A1:A))},"SELECT Col2 WHERE Col1 LIKE '%c%'")