I want to use a Dockerfile to build an image. However, commands will need user input as they run. Currently, the build is not successful because docker exits on user input. I know I can use the -i -t options on docker run command but I want to do that on a Dockerfile. How is that possible?
You can try with expect or a similar tool.
The easiest way to configure it is using the autoexpect tool, which lets you run the commands interactively and creates an expect script for you.
I couldn't get the rvmsudo stuff working (I haven't used it and didn't want to spend too much time with it) so I decided to use vi instead. First run autoexpect
$ autoexpect vi test
This will open vi and you can create or edit the file and save it. After exiting the vi you'll see your file test as well as an expect script script.exp.
You can then remove the test file and execute script.exp. It will recreate the same file using the same steps.
The autoexpect tool is great, but you may have to create a script from scratch if you need to have more control over what happens. E.g. if you don't want the script to work with the exact expected input.
Related
I'm new to Docker, and I'm not sure how to quite deal with this situation.
So I'm trying to run a docker container in order to replicate some results from a research paper, specifically from here: https://github.com/danhper/bigcode-tools/blob/master/doc/tutorial.md
(image link: https://hub.docker.com/r/tuvistavie/bigcode-tools/).
I'm using a windows machine, and every time I try to run the docker image (via: docker run -p 80:80 tuvistavie/bigcode-tools), it instantly closes. I've tried running other images, such as the getting-started, but that image doesn't close instantly.
I've looked at some other potential workarounds, like using -dit, but since the instructions require setting an alias/doskey for a docker run command, using the alias and chaining it with other commands multiple times results in creating a queue for the docker container since the port is tied to the alias.
Like in the instructions from the GitHub link, I'm trying to set an alias/doskey to make api calls to pull data, but I am unable to get any data nor am I getting any errors when performing the calls on the command prompt.
Sorry for the long question, and thank you for your time!
Going in order of the instructions:
0. I can run this, it added the image to my Docker Desktop
1.
Since I'm using a windows machine, I had to use 'set' instead of 'export'
I'm not exactly sure what the $ is meant for in UNIX, and whether or not it has significant meaning, but from my understanding, the whole purpose is to create a directory named 'bigcode-workspace'
Instead of 'alias,' I needed to use doskey.
Since -dit prevented my image from instantly closing, I added that in as well, but I'm not 100% sure what it means. Running docker run (...) resulted in the docker image instantly closing.
When it came to using the doskey alias + another command, I've tried:
(doskey macro) (another command)
(doskey macro) ^& (another command)
(doskey macro) $T (another command)
This also seemed to be using github api call, so I also added a --token=(github_token), but that didn't change anything either
Because the later steps require expected data pulled from here, I am unable to progress any further.
Looks like this image is designed to be used as a command-line utility. So it should not be running continuously, but you run it via alias docker-bigcode for your tasks.
$BIGCODE_WORKSPACE is an environment variable expansion here. So on a Windows machine it's %BIGCODE_WORKSPACE%. You might want to set this variable in Settings->System->About->Advanced System Settings, because variables set with SET command will apply to the current command prompt session only. Or you can specify the path directly, without environment variable.
As for alias then I would just create a batch file with the following content:
docker run -p 6006:6006 -v %BIGCODE_WORKSPACE%:/bigcode-tools/workspace tuvistavie/bigcode-tools %*
This will run the specified command appending the batch file parameters at the end. You might need to add double quotes if BIGCODE_WORKSPACE path contains spaces.
I’m running an Azuracast docker instance on Linode and want to try to find a way to automate my updates. Right now my routine is when I notice there are updates by accessing the Azuracast web panel, I usually run timeshift to create a backup using the following command
timeshift —-create —-comment “azuracast update ”
And then I use the following to update azuracast
cd /var/azuracast/
./docker.sh update-self
./docker.sh update
Then it asks me to ensure the azuracast installation is backed up before updating, to which i would usually just press enter.
After that is completed, it asks me if i want to clean up all stopped docker containers and images to save space, which i usually say no to.
What I’m wondering is if there is a way to create a bash script, or python or something to automate all of this, and then have it run on a schedule?
Sure, you can write a shell script to execute these commands and then run it on a schedule using crontab(5).
For example your script might look like:
#! /bin/sh
# Backup azuracast and restart docker container
timeshift --create --comment “azuracast update” && \
cd /var/azuracast/ && \
./docker.sh update-self && \
(yes | ./docker.sh update)
It sounds like this docker.sh program takes some user inputs. See if there are options you can pass to it that will allow you to run it non-interactively. (Seems there isn't, see edit.)
To setup your cron job, you can put the script in /etc/cron.hourly, /etc/cron.daily, /etc/cron.weekly, or /etc/cron.monthly. Or if you need more control, you can get started configuring a cron job with crontab -e. Better explanation.
EDIT: Assuming this is the script you're using, it doesn't seem to have a way to run update non-interactively. Fear not though, there's a program for this: yes(1). This will answer yes to both of the questions, but honestly running docker system prune -f is probably a good idea. If you really want to answer no to that, you could probably substitute yes for printf "y\nn" to answer yes to the first and no to the second.
Also note that there's at least one other y/n question it could ask you, which you probably want to answer yes to.
We have some local installers and zip files that we use to build our docker images. It is easy to get this to work in a Dockerfile:
FROM mcr.microsoft.com/windows/nanoserver
COPY myinstaller.exe .
RUN myinstaller.exe; \
del myinstaller.exe
The problem here is that it produces a layer for the COPY line, which increases the size of the image. A common work-around for this is to have one RUN line, that downloads the file from the Internet, runs commands, and then deletes the installation file. The problem, as written above, is that the installers are on the local filesystem.
I found that there is a --squash command for docker:
docker build --squash -t mytestimage .
This does exactly what I want: It gives me an image without this extra installer file that is not necessary. To run this command, you need to enable experimental features though. There is also an open issue to simply remove this feature:
https://github.com/moby/moby/issues/34565
Is there some alternative way of using local installers in a Dockerfile when running on Windows, that doesn't involve setting up a server to provide the files?
We ended up setting up nginx to provide files when building. On our build server, the machine building our docker images and the server that has the installer files have a very good connection between them, so downloading huge files is not a real problem.
When it comes to --squash, it is bugged for Docker on Windows. Here is the relevant issue for it:
https://github.com/moby/moby/issues/31468
There is an issue to move --squash out of experimental, but it doesn't seem to have a lot of support:
https://github.com/moby/moby/issues/38657
The alternative that some people propose instead of --squash is multi stage build, discussion here:
https://github.com/moby/moby/issues/34565
There is an alternative to --squash, if you have local installer files, you don't want to set up a web server, and you would like your docker image to be small, and you are running Windows: Use mapped drives.
In Windows, you can share folders with other users on your network. Docker containers are like another computer that is running on your physical machine, and it can access these network drives.
First set up a new user, for example username share and password password1. Create a folder somewhere on your computer. Then right click it, click properties, and then go to the Sharing tab and click "Share". Find the user that you have just created, using the little dropdown menu and Find people ..., and share the folder with this user.
Create a folder somewhere for your test project. Create a batch file setupshare.bat that looks like this:
#echo off
for /f "tokens=2 delims=:" %%i in ('ipconfig ^| findstr "Default Gateway"') do (
set hostip=%%i
goto :end
)
:end
set hostip=%hostip: =%
net use O: \\%hostip%\vms /USER:share password1
The first part of this file is only to find the ip address that the docker container can use to access its host computer. It is not the most pretty thing I've ever put together, so let me know if there's a better way!
It uses a for-loop, as that is the way to save the output of a command to a variable in batch files. The command is ipconfig, and we pipe it to findstr and searches for Default Gateway. We need to use ^| instead of just | because it is in a for-loop. The first part of the for-loop divides each line from the command on the delimiter, which is : in this case, and we only take the second token. The for-loop only handles the first line, if there are multiple entries with a Default Gateway. This script doesn't work if there are multiple entries and the first one is not the correct one.
The line set hostip=%hostip: =% is to remove a space at the start of the string.
We then have the IP address that we want to use stored in hostip. We use this in the net use command, which will map O:\ to shared folder vms on the machine with IP hostip. We use the username share and the password password1. Note that this is a very bad way of handling passwords, as they kind of should be secret!
With a batch file like this, we can set up a Dockerfile in this way:
# escape=`
FROM mcr.microsoft.com/dotnet/core/sdk:3.0
COPY setupshare.bat .
RUN setupshare.bat && `
copy O:\file.txt file.txt
The RUN command will first call setupshare.bat that sets up the network share properly. We can then use any file that we shared, for example a huge installer, and install the things that we want. In this case I have only shared a test file file.txt to see that it works, so just change that line.
I would still advice everyone to just set up a little web server, for example nginx, and use the standard way of writing Dockerfiles, with downloading files and running it in the same RUN command. That's what people expect when they see a Dockerfile, and it should be a more robust solution.
We can also hope that the Docker people either makes a COPY command that can copy, run, and delete installers in the same layer, or that --squash is implemented properly.
I have been trying http://predictionio.apache.org/install/install-docker/ this tutorial. I have successfully built Docker image however when I try to run docker run i get the Can't open /etc/predictionio/pio-env.sh error.
docker build -t predictionio/pio pio
docker run -ti predictionio/pio
PS: If I comment out the last line CMD ["sh", "/usr/bin/pio_run"] I can build and run docker image successfully. I can open the file too from docker bash.
I think you need to grant permissions to execute this file. add the following line at the end of your Dockerfile
RUN chmod +x pio_run.sh
also, you might need to change CMD to ENTRYPOINT like following:
ENTRYPOINT ["sh","/usr/bin/pio_run.sh"]
Your output states you are running Windows. Did you use the default command prompt or did you use docker terminal? I had the same error messages in the past on Windows but mysteriously it disappeared after trying the tutorial again. I am not sure what I did different except I might possibly used docker instead of the default command prompt...
Could you also try using docker-compose instead of plain docker commands as described in the tutorial?
Ensure your storage (Postgres, MySQL or ElasticSearch) is running before starting PIO as well.
Just resolved it on my machine.
When you cloned repository on Windows, git converted end of line symbols from Unix-style (\n) to Windows style (\r\n).
You need to open file C:\wherever-you-cloned-pio-repository\predictionio\docker\pio\pio_run and change it back (for e.g. using Visual Studio Code, or Notepad++). Then you need to rebuild the image and it should work.
Also for the future you may want to disable automatic conversion Disable git EOL Conversions
I use Java S2I image for a container running in Openshift (on premise). My problem is that the output of the image is page-buffered and oc logs ... does not show me the last logs.
I could probably spin up my docker image that would do stdbuf -oL -e0 java ... but I would prefer to stick to the 'official' image (just adding the jar to /deployments). Is there any way to reduce buffering (use line-buffering instead of page-buffering), or flush the output on demand?
EDIT: It seems that I could update deployment config and pass stdbuf in there, but that means that I'd have to compose all the args myself. Ideal solution would be passing --tty do Docker, but I can't see how a custom arguments could be passed that way in Openshift.
In your repo, try creating the file .s2i/bin/run. In it add:
#/bin/bash
exec stdbuf -oL -e0 /usr/local/s2i/run
I always forget where the S2I assemble and run scripts are in the Java S2I image, so you may need to replace /usr/local/s2i with the correct path.
What adding this file does is that it will be run as the startup command instead of the original run script. You can then run the original script with stdbuf. Ensure you use exec so that the sub process replaces the current one, else signals will not be propagated through properly.
Even though this might work, am surprised logging isn't working in an unbuffered mode already. I expect there would be a better way of controlling it through some Java config instead.