I am integrate LinkedInIOS Login Demo with my current application from:
https://github.com/jeyben/IOSLinkedInAPI
Also add supporting classes of "AFNetworking".
And It's gives me an error as mention below:
Undefined symbols for architecture armv7:
"_kUTTagClassMIMEType", referenced from:
_AFContentTypeForPathExtension in AFURLRequestSerialization.o
"_kUTTagClassFilenameExtension", referenced from:
_AFContentTypeForPathExtension in AFURLRequestSerialization.o
"_UTTypeCreatePreferredIdentifierForTag", referenced from:
_AFContentTypeForPathExtension in AFURLRequestSerialization.o
"_UTTypeCopyPreferredTagWithClass", referenced from:
_AFContentTypeForPathExtension in AFURLRequestSerialization.o
ld: symbol(s) not found for architecture armv7
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Please suggest me any solution about it. My deployment target was 5.0.
That problem was resolved. As possible issue for that kind of problem was shown at below question:
https://stackoverflow.com/questions/6429494/...
But in my case I need to add MobileCoreServices.framework
By adding this framework problem was resolved.
Thanks.
Related
While building the Application i am getting the following error i have searched a lot but i am unable to figure out what is the problem.
ld: warning: ignoring file /Users/username/GoogleMaps/GoogleMaps.framework/GoogleMaps, missing required architecture arm64 in file /Users/username/GoogleMaps/GoogleMaps.framework/GoogleMaps (2 slices)
Undefined symbols for architecture arm64:
"_OBJC_CLASS_$_GMSPolyline", referenced from:
objc-class-ref in GPSController.o
"_OBJC_CLASS_$_GMSCameraPosition", referenced from:
objc-class-ref in GPSController.o
"_OBJC_CLASS_$_GMSMutablePath", referenced from:
objc-class-ref in GPSController.o
"_OBJC_CLASS_$_GMSMarker", referenced from:
objc-class-ref in GPSController.o
"_OBJC_CLASS_$_GMSMapView", referenced from:
objc-class-ref in GPSController.o
"_OBJC_CLASS_$_GMSServices", referenced from:
objc-class-ref in AppDelegate.o
ld: symbol(s) not found for architecture arm64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
I am using GoolgeMaps SDK 1.4.3
PS:- I am relatively new to iOS programming so please avoid any blunders.
Adding value $(inherited) to BuildSettings->Linking->Other Linker Flags of your target
If you are developing an SDK/framework/POD you should do the same as above but under target name PROJECTNAME_tests.
Should fix the issue.
I had this problem too, and my solution was to add the frameworks to
Target -> Build Phases -> Link Binary With Libraries
ok I figured out the Problem
My Library was not built for 64-bit but i was trying to use that settings for my app, after i removed arm64 from architecture i successfully build the application.
I have built a cocoa framework via XCode 6.1.1, also created a universal version of the framework, then when I import the framework into a project, an compiling error:
Undefined symbols for architecture armv7:
"_OBJC_CLASS_$_UIResponder", referenced from:
_OBJC_CLASS_$_AppDelegate in AppDelegate.o
"_OBJC_METACLASS_$_UIResponder", referenced from:
_OBJC_METACLASS_$_AppDelegate in AppDelegate.o
"_UIApplicationMain", referenced from:
_main in main.o
"_OBJC_METACLASS_$_UIViewController", referenced from:
_OBJC_METACLASS_$_ViewController in ViewController.o
"_OBJC_CLASS_$_UIViewController", referenced from:
_OBJC_CLASS_$_ViewController in ViewController.o
ld: symbol(s) not found for architecture armv7
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Wonder to know why?
And how to analyse the cause of the problem?
You have to add the armv7 architecture to your framework before building it.
Because the project where you use the framework in has this architecture.
You also can check the path to the framework (framework search-path)
H, I use admob of google, I added all the framework, I did exactly what they wrote in the guidline. But after I build this error appeared . I went through some solution on stackoverflow but can not fix it please help me.
"_CGSizeFromGADAdSize", referenced from:
-[GADMasterViewController init] in GADMasterViewController.o
-[GADMasterViewController resetAdView:] in GADMasterViewController.o
"_OBJC_CLASS_$_GADBannerView", referenced from:
objc-class-ref in GADMasterViewController.o
"_OBJC_CLASS_$_GADInterstitial", referenced from:
objc-class-ref in GADMasterViewController.o
"_OBJC_CLASS_$_GADRequest", referenced from:
objc-class-ref in GADMasterViewController.o
"_kGADAdSizeSmartBannerLandscape", referenced from:
-[GADMasterViewController resetAdView:] in GADMasterViewController.o
"_kGADAdSizeSmartBannerPortrait", referenced from:
-[GADMasterViewController init] in GADMasterViewController.o
-[GADMasterViewController resetAdView:] in GADMasterViewController.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
You're trying to build your project for 64bit x86 architecture, hence the message: "ld: symbol(s) not found for architecture x86_64"
I'm not sure exactly how do you do this, since you want to build an iOS project, and even if you would built it for the simulator, the architecture would be i386, not x86_64. Something is wrong with your build settings. Could you provide us with some details on these settings?
I am trying to add an AdManager File in my iphone app so that it has differernt types of ads. (revmob, adwhirl, chartboost etc). At the same time I want the In App-Purchase functionality as well. I am working correct on that but there is some issues and bugs which I don't understand what are, I even added all the required frameworks.
Undefined symbols for architecture i386:
"_OBJC_METACLASS_$_CDataScanner", referenced from:
_OBJC_METACLASS_$_CJSONScanner in CJSONScanner.o
"_SKStoreProductParameterITunesItemIdentifier", referenced from:
-[RevMobStoreController openStoreWithITunesItemId:] in RevMobAds(RevMobStoreController.o)
"_OBJC_CLASS_$_SKStoreProductViewController", referenced from:
objc-class-ref in RevMobAds(RevMobStoreController.o)
"_OBJC_IVAR_$_CDataScanner.current", referenced from:
-[CJSONScanner scanNotQuoteCharactersIntoString:] in CJSONScanner.o
"_OBJC_CLASS_$_CDataScanner", referenced from:
l_OBJC_$_CATEGORY_CDataScanner_$_CDataScanner_Extensions in CDataScanner_Extensions.o
_OBJC_CLASS_$_CJSONScanner in CJSONScanner.o
"_OBJC_IVAR_$_CDataScanner.end", referenced from:
-[CJSONScanner scanNotQuoteCharactersIntoString:] in CJSONScanner.o
ld: symbol(s) not found for architecture i386
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Did you add the StoreKit framework?
That would certainly resolve the first couple of linker errors.
When i am trying to implement share through AddPlus , following error displayed. what can i do? Anybody knows?
Undefined symbols for architecture armv7:
"_OBJC_CLASS_$_Facebook", referenced from:
objc-class-ref in libAddThis.a(ATFacebook.o)
"_OBJC_CLASS_$_ATReachability", referenced from:
objc-class-ref in libAddThis.a(ATGenericUtility.o)
"_OBJC_CLASS_$_SBJSON", referenced from:
objc-class-ref in libAddThis.a(ATTwitter.o)
objc-class-ref in libAddThis.a(ATWebServiceAPI.o)
ld: symbol(s) not found for architecture armv7
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Have you checked all your frameworks are properly referenced ? if I am not mistaken the following are required for addThis:
Security.framework,
CoreData.framework,
SystemConfiguration.framework,
MessageUI.framework,
Twitter.framework,
the following are needed for the new facebook SDK also set them as optional for versions prior to ios6
Social.framework,
AdSupport.framework,
Accounts.framework