So I have my app set up with two view controllers. The first one is my initiation screen, where the app starts, and the second is one the user can navigate to. I added the second one later on in my development, but when I went to the right column under the identity inspector, my new Cocoa Touch Class file is not populated for me to select. Now if you ask me to just type it in, I've tried that, it does not seem to connect. I've tested it by printing a simple line in the viewDidLoad() of the new second class when it is loaded in the simulator, but nothing is printed. Any help would be greatly appreciated!! Thanks!
EDIT
Easy fix is:
Select the activity indicator on storyboard and go to identity inspector and copy the object id. as image: ObjectID_ActivityIndicator
Right click the storyboard file which has the view controller you are working at.
Open as > Source Code
Press command + F to find and look for the id you copied previously
Paste this: customClass="yourclassname" customModule="moduleNAme" customModuleProvider="target"(don't change this target word, you can choose desired module from identity inspector if any).
Command + S to save it and again right click on storyboard file > openAs> Interface builder
Now select activity indicator again and go to identity inspector. You will now see it there. You can also change it as per requirement.
Enjoy. I faced this problem today and found no help online. My class and module field were greyed out. Tried this fix and it worked.
Note: Make sure your custom class is accessible and is in app directory i.e it's not highlighted in red color but gives a normal look.
I have seen a problem like this where the solution was to change the "Module" to a specific value, close the storyboard, reopen it and delete the "Module" setting (assuming it was originally blank or restore it to its original value). This happened in project with many targets and their names may have changed.
Xcode storyboard assistant editor stopped showing related files.
"Automatic" is selected and "Class" is filled in Identity Inspector.
It was working before, but know it has stopped.
"Auto" or "CounterPart" modes are still woking for other files except StoryBoard.
A few days ago, I tried to update from Xcode 5 to 6, but later on gave up.
Would that have something to do with it?
With XCode 11 onwards, you can option(alt) + click on the file that you want to view in assistant editor.
Simple Fix.
Found the solution (at least worked for me), it's the same bug that causes you not to be able to create new outlets. You must delete the [DerivedData] folder:
Close the project you are working on with.
Delete the【DerivedData】folder of you project. (This folder may inside your project's folder, or inside
~/Library/Developer/XCode/DerivedData/(your project)/ ) or somewhere
else that were setup by you.
Restart Xcode.
see here.
In same case this worked for me:
Right click on ViewController file(on left pane) and choose Delete -> Remove Reference.
Right click on folder where this ViewController file was and choose Add files to .. and add this ViewController file which your just deleted.
Profit.
Deleting the Derived Data didn't work for me nor force quitting Xcode and restarting it.
The only thing that worked was deleting both the class and the storyboard (only the reference to them) and adding them back to the project.
Hope to help someone.
If anyone is wondering how to find Assistant editor in XCode 11 then
please find the steps from the below image. You can show this options
in storyboard or Xib files on upper left corner.
Maybe it's too late but just with the keyboard, you can launch a reset for associated files.
Use the keyboard :
command + option + shift + z
You can find it in the menu Xcode->View->Assistant Editor->Reset Editor.
Click first on the assistant window, then click on 'option'+'alt' and right click on the view controller that you want.
I have Xcode 13.1 and none of these solutions is working for me, but this simple solution works for me every single time. With your Storyboard and (empty) Assistant Editor open, in the upper right of the Editor window click the "Add Editor on Right" icon Editor On Right Icon, and just as promised, it will open a new editor to the right of your Storyboard and (broken) Assistant Editor, only the Assistant in THIS window will be working! Just find the "Close Window" x on your broken editor, close it, and in its place will be your shiny new working Assistant!
Full Editor View of where to click to open the new Editor On Right
Tried all the above methods whereas after simply running the app Command + B fixed this issue and I was able to select the screen under automatic.
This command on terminal fixed my issue:
defaults write com.apple.dt.XCode IDEIndexDisable 0
simply exiting and reopening Xcode worked for me.
For Xcode 8+ versions
Check at top process indicator that if Xcode is "indexing" files... if yes, then, please wait until it finishes. Once it get finished. Your file will automatically appear as counterpart in Automatic section.
If Xcode is not showing "indexing" in process bar, then perform as #Anna Chiara's Answer
I deleted ~/Library/Developer/XCode/DerivedData -> didn't work
Xcode->View->Assistant Editor->Reset Editor is disable
Finally, I figured out that the class name of File's Owner of .xib file is incorrect (the class doesn't exist). I corrected it and Assistant Editor works again.
Hope this helps you
I had the same problem. Finally this is what worked for me.
Changing the name of the ViewController File.
Change the name of the class to the new name via the Refactor tool
Refactor tool
The only thing that ended up working for me was copying over the code from the offending ViewController files and completely deleting them, then creating new ones with the exact same name and pasting in the previous code.
The assistant then linked up to the new ViewController files with no issue.
None of these answers worked for me w/ XCode 13. However, the following worked:
Rename the ViewController class to ViewController2
Update the reference in the storyboard to ViewController2
This made the assistant editor appear.
Change the name of the class back to ViewController. Change the reference in main.storyboard back to ViewController and hit enter (Step 2)
I had same issue and spent almost 2 hours of trying different aproaches finally I found something to solve problem.
I've created two or more VC at the same swift file and I think that's why IDE confused about the files.
So I suggest that you should delete your viewcontroller class and clean than reassign class.
I hope it works for you too.
For what it is worth, this was happening to me for the last couple days on 9.3 . I had just added a new build schema for an alternate debug symbol on testflight. It was not until I removed the new schema and then deleted Derived Data and restarted did it start working again. I have re-added the new schema back in and it continues to work. Not sure what the issue was, but that is what solved it for me.
In case anyone is watching I had a bizarre instance of this (Xcode 11): I deleted a View Controller that I'd done incorrectly; dropped in a new one, created the UIView and associated. BUT I didn't bother to create the outlet from the View Controller on the previous screen. Strange that it let me work for a few minutes, then after I had turned off the assistant editor to do something else, turned it back on and only had the UIResponder.h file. Edit - this happened again. Had to delete the 'wire' to the next screen, then recreate - then option to get to the correct .m and .h files reappeared.
I faced a similar issue and here's what I did
I had a swift file and a xib file with its class connected to the swift file like so inside a group folder, and it doesn't show that they're connected.
But when I take them off the folder the assistant works somehow, so I took them off the folder and made an outlet from a UILabel then put them back inside the folder then they're permenantly connected.
Quite Xcode and reopen it. This is solve my problem.
I had the same problem. But my problem was about having the VC's under "View Controller" folder. When I move VC's to main folder instead of "View Controller" folder, I was able to reach the assistant without problem. If you have the same issue like mine, you can solve by deleting all the VC's and create again under your sub folder.
Just add the Class on right side of your story board which you want to open in assistant
I'm trying to create a nib that contains a view that will be embedded in a TableViewCell. I've created the interface and implementation files, ResultCell.h and ResultCell.m. They're stock, out-of-the-box, no code changes.
I then create an empty XIB file, and drag a UIView onto it. Then I click File's Owner, and set the type to ResultCell. I click the view, and set its class to also be ResultCell.
Here are the problems I have:
When using the Assistant Editor view (which I live in), the ResultCell.h file doesn't appear when I'm viewing the ResultCell.xib file. I have to force it to load by clicking on Automatic and selecting the file.
When I drop a label in the view, and then Ctrl+Click and drag to the .h to create an outlet, I get this error message: "Could not insert new outlet connection: Could not find any information about the class named ResultCell."
I've tried creating and re-creating the view, and it's just not working, and I've started to lose my patience. Any help would be very, very appreciated!
I got into a similar state just today. It was very odd: I could attach any XIB (new or existing) to any already-existing ViewController class in the project, but I could not create a new ViewController and have it attach properly to any XIB. The "assistant" functionality didn't work, nor did the IB-to-headerfile-connection functionality.
Closing the project and re-opening did not fix it.
Quitting XCode and restarting did not fix it.
Creating a new project and testing the functionality worked fine, which led me to believe there was something corrupt in some cache somewhere.
My solution
Close your project.
Go to the ~/Library/Developer/XCode/DerivedData folder and REMOVE all subfolders there referencing the project you are working on.
Open your project in XCode. The problem should be fixed now.
Incidentally, just running a full clean did not seem to clear things up. I had to trash the derived data. I'm certain I got into this position because of git games I was playing, but I had no idea how to get out, because even switching back to earlier git revisions didn't help. (That was a big clue also that it was something untracked by the project itself.)
This might not work for your specific issue, but occasionally I get that error when working with newly created nibs. Deleting and recreating the nibs and View Controllers with the same names as before didn't resolve the issue, but relaunching Xcode did.
I just had this problem and restarting Xcode did not fix it. I removed the class files from the project then added them back in and it started working.
I had the very same issue. And I tried :
Restarting Xcode
Deleting Derived Data
And many more
None of that worked. What worked for me was simply to :
Remove 'suspect' class files from Project (just remove References, huh?)
Re-add them to the project
And done!
If restarting Xcode doesn't work of you, I have found that Toggling the new .m file out and back into the target membership works.
This helped me out:
from the project file Panel (left side) select the xib file that is broken.
Click on the Files Owner icon from the editor view.
from the properties Panel (right side) select the third tab (at the top)
specify the "Custom Class"
If you do not see a "panel", please have a look at the top-right corner of the window and enable the proper "view" buttons. If you don't see the "view" buttons then click on the top-right most capsule button.
I noticed that .m file was moved inside en.lproj folder.
Just delete (reference only) the .m file from the Xcode and moved .m out of the en.lproj. Add it again.It will fix the issue.
Don't worry, you will get all your connections back.
I encountered the same problem today. Restarting XCode did not fix the problem for me. I was able to get things back to normal by using "Delete" option of "Derived Data" of the project that can be found under Organizer. Organizer says that, "Derived Data includes index, build output and logs". I guess that either index or build output was causing this issue.
in XCode go to organizer, click project, click delete derived data... than clean the project
In my case it helped to make a "fake change" (just a space) to the according header file.
ResultCell should be a subclass of UITableViewCell
You should not drag a UIView onto the empty canvas, you should drag a UITableViewCell
You should select the cell and change it to be your subclass
The owner is most often a controller with an outlet to the cell
Everytime you want to load a new cell, call:
[[NSBundle mainBundle] loadNibNamed:nibName
owner:controllerWithOutletToCell
options:nil]
after loading, use the cell, and set the ivar/outlet to nil, ready for the next load
there are other ways, but this is common
Perhaps what worked for me is this.. (Xcode v4.5)
This did not work
I was trying to control drag into the interface definition of my .h
#interface SearchViewController : UIViewController
#end
This worked (may be that is how it was supposed to work, I did not know it before)
See the open and close brackets. Control drag and drop after the closed bracket.
#interface SearchViewController : UIViewController
{
}
#end
I had a similar problem with a project written in Swift.
What worked for me was setting up the IBOutlet in code like this
#IBOutlet var foo: UIView?
and afterwards connect it to Interface Builder by dragging to the little circle that appeared right next to the code line.
None of the above workarounds resolved the connector issue for me so I shelved my pet project until I came across the following stackoverflow thread:
https://stackoverflow.com/a/15873770/2846800
I had been working on a large project in a previous version of XCode and had turned off indexing. By re-enabling indexing my issue is now fixed:
defaults delete com.apple.dt.XCode IDEIndexDisable
I can now use the D&D features of Interface Builder. I hope this can help others...
This problem seems to be an Xcode bug which creeps up mostly when you replace a file with a new file of the same name. Xcode seems to keep a reference of the older file of the same name.
Anyhow, the way to fix this seems to be:
Clean the project
Click (Your Project) in Project Navigator view. Go to Compile Sources under Build Phases of the target for which you are building. Remove and add back the .m file which is giving you trouble.
Alternatively, in the File Inspector (Utilities view) of the NIB file, under Target Membership, uncheck and check back the target name.
Restart Xcode for good measure.
Of course, deleting and adding back the .m file alone should fix it too.
(Steps 1 and 2 alone fixed it for me.)
If you copied files from other project just make sure you check the 'Add to targets' box
Renaming the class files may unlink them from the XIB. This answer helped me discover this:
Ctrl-Drag from button to method not working. Xcode/Interface Builder
Check that your custom class is set correctly in the Identity Inspector.
Similar symptom, but different cause.
Apparently I hit backspace when the focus was on the assistant view, because one of the standard file template comment lines went from // to / which results in the file not compiling.
Fixing the comment allowed the SDK to parse the file, recognize it as a UIViewController, and add in the outlet.
SO -- if you have this problem, do a build or analyze to see if there are errors that need fixing in your view controller .h file. THEN try the other solutions.
This might be an old topic but just in case anyone has the same issue in future, try deleting the associated .xib,.h and .m files and create new ones. For me, the UIViewController in my .h file wasn't purple and even backspacing and typing it didn't help.
Just put a line between the #implementation and the #synthesize. Most of the answers here have that in common. It worked for me
#implementation
#synthesize
I just tried everything here and nothing worked (using a Developer Preview for Xcode 5).
The only thing that worked for me was to put this incomplete line in my interface file:
#property (nonatomic, weak)
For whatever reason, adding outlets and actions by drag and drop from a .xib worked fine after that.
For me wether cleaning nor deleting the DerivedData solved the problem.
I tried to delete and recreate my UIViewController class several times and got the problem again and again.
Then I recreated the UIViewController class and gave it a different name. This solved the problem for me.
I have had this problem and found a solution not listed above.
In my case, I could see there was something wrong in the class .h file because my custom view controller did not recognise the class : UIViewController (it was in black not purple). All the other custom view controllers had the : UIViewController in purple.
in my case, and possibly yours, I needed to add the class to targets/build phases/compile Sources drop down. The .m needs to be added. All of the other .m's were there but not this one.
Once I added it, the :UIViewController appeared in purple and everything worked fine.
For my case, I have multiple project with some other dependencies. I tried to solve it by deleting derived data or restarting XCode but it couldn't work. In the end, I tried the following method and it works:
Go to target > Build Target Architectures Only > and set both Debug and Release to NO.
Set this for all projects in the workspace and recompile to make sure there is no other errors. Maybe not making sense but somehow did it. During my compilation, I had other issues such as linker errors and symbols not found.
For *.m file of this class view open "Show File Inspector" and unchecking "Target membership" for this project, then do Clean (menu Product->Clean) and checking again "Target membership" for this project
Using Swift, I had a similar problem. I found out that the comments were part of the problem for me.
I leveraged the default view controller, did some work in it, then created a second view controller by copying the entire first one, stripping it down to only viewDidLoad() and renaming the class to TestViewController. Builds worked, code executed. All was good.
When I went to drag a UITextField in to create an outlet, it would not let me. I noticed that my comments still said "ViewController.swift", so I changed the comment text to "TestViewController.swift" and rebuilt. I was able to connect my outlet!
I wonder if what occurred is that the Indexer was reading the comments as well as the class names, and somehow got confused.
Hope this helps someone out there.
I just had to delete the derived data folder. You need to click Window -> Organizer -> Projects -> Delete Derived Data
AND RESTART XCODE.
You should be good to go!
The new class not being part of the "TARGET" is likely the root cause of this, as alluded to by some of these answers.
When creating a new cocoa class, by default the option to add new class to target is by default checked, but should, for any reason, this not be checked when you hit save, you will have this issue.
Any of these workarounds that add the new class to the apps target will work to resolve the problem, and is something that all these 'fixes' have in common.
I think XCode likely has some bugs that causes a new file to, by default, NOT be added to the apps main target. The fix boils down to adding your 'broken' class to the main TARGET
In XCode 7.1, adding the connector at a different point in my source file worked. The error I was getting referred to one of my variables as if it were a class (didn't make any sense). The error stopped occurring when I added the connector below that variable instead of above it.
There is also a diferent reason for the issue ... if you have created new cocoa class file with template other than ios ... i can happen...
The solution would be to delete it and re create it with right template