I have Inherited form and a Ehlib dbgrid on it for selecting-listing records... The form is ready made for a lot of buttons and im using this form with different queries.
Like this...
If Dm.QrTmp.Active then Dm.QrTmp.Active:=False;
Dm.QrTmp.SQL.Clear;
Dm.QrTmp.SQL.Add(' SELECT ');
Dm.QrTmp.SQL.Add(' ch.cari_RECno AS KayitNo ');
Dm.QrTmp.SQL.Add(' FROM CARI_HESAPLAR ch ');
if FrmTmp=nil then FrmTmp:=TFrmTmp.Create(Self);
FrmTmp.StatusBar.Hide;
Dm.QrTmp.Open;
FrmTmp.DbGrid.DataSource:=Dm.DsQrTmp;
This query is cutted down but i have of course use a lot of fields. And Queries changes alot of time in the application.
The problem is column width. Manager wants to set column widths and restore them again. Actually my grid component supports save - restore column properties but as you can see my usage i m not using static columns. also i dont want to use xgrid.columns[0].width percent by percent.
Im using a ini in may app.
I want to add new section on it and named "Gridwidth"...
[Gridname]
Colwidths=x,y,z (where they are width values)
I'm now coding this line by line.
My write procedure is like this.
With dbgridx do
begin
For i:=0 to columns.count-1
begin
widthstr:=widthstr+Column[i].width+',';
end;
end;
Widthstr will be "15,23,45,67" etc...
But i want to know if this is good solution and if somebody know a better way and has some good code.
This should do it:
uses
IniFiles;
const
SETTINGS_FILE = 'Edijus\Settings.ini';
procedure TForm1.LoadDBGridColumnsWidth(const ADBGrid: TDBGrid);
var
_MemIniU: TMemIniFile;
_SettingsPath: string;
i, j: integer;
_ParentClass: TWinControl;
begin
_SettingsPath := GetHomePath + PathDelim + SETTINGS_FILE;
if (not Assigned(ADBGrid)) or (not Assigned(ADBGrid.DataSource)) or
(not Assigned(ADBGrid.DataSource.DataSet)) then
Exit;
_MemIniU := TMemIniFile.Create(_SettingsPath, TEncoding.UTF8);
try
_ParentClass := ADBGrid.Parent;
while not(_ParentClass is TForm) do
_ParentClass := _ParentClass.Parent;
for i := 0 to Pred(ADBGrid.DataSource.DataSet.Fields.Count) do
for j := 0 to Pred(ADBGrid.Columns.Count) do
begin
if (ADBGrid.DataSource.DataSet.Fields[i].FieldName = ADBGrid.Columns[j]
.FieldName) then
ADBGrid.Columns[j].Width :=
_MemIniU.ReadInteger(_ParentClass.Name + '_' + ADBGrid.Name,
ADBGrid.Columns[j].FieldName, 64);
end;
finally
FreeAndNil(_MemIniU);
end;
end;
procedure TForm1.SaveDBGridColumnsWidth(const ADBGrid: TDBGrid);
var
_MemIniU: TMemIniFile;
_SettingsPath: string;
i: integer;
_ParentClass: TWinControl;
begin
_SettingsPath := GetHomePath + PathDelim + SETTINGS_FILE;
if (not Assigned(ADBGrid)) or
(not ForceDirectories(ExtractFilePath(_SettingsPath))) then
Exit;
_MemIniU := TMemIniFile.Create(_SettingsPath, TEncoding.UTF8);
try
_ParentClass := ADBGrid.Parent;
while not(_ParentClass is TForm) do
_ParentClass := _ParentClass.Parent;
for i := 0 to Pred(ADBGrid.Columns.Count) do
if (ADBGrid.Columns[i].FieldName <> '') then
_MemIniU.WriteInteger(_ParentClass.Name + '_' + ADBGrid.Name,
ADBGrid.Columns[i].FieldName, ADBGrid.Columns[i].Width);
_MemIniU.UpdateFile;
finally
FreeAndNil(_MemIniU);
end;
end;
Related
I need to extract a list of unique items from 12 years' worth of consistent computer-generated one-per day text files. The filenames vary only by the included date, so it is easy to generate the required name in code. They consist of a list of all the aircraft movements at my local airport during the given day, in time order. Naturally, the same aircraft come and go many times, and the objective is to loop through the files, pick out the first instance of when each individual aircraft appears (the first visit or FV) copy it to a list and then ignore it from then on. The result should be a list of all the first visits in date order. Should be simple, but... My program is small so I am including the entire implementation code.
procedure TForm1.FormCreate(Sender: TObject);
begin
FileDate := StrToDate('01/01/2007');
FName := 'E:LGW Reports/SBSLGW2007-01-01.txt'; //1st file to be read
FDStr := copy(FName, 21, 10);
TempList := TStringList.Create; //temp holder for file contents
FVCheckList := TStringList.Create; //holds unique identifier (UID)
FVCheckList.Sorted := TRUE;
FVCheckList.Duplicates := dupIgnore;
FVList:= TStringList.Create; //the main output
end;
procedure TForm1.Button1Click(Sender: TObject);
var
i: integer;
begin
Memo1.Lines.Append('Started');
Repeat
TempList.Clear;
TempList.LoadFromFile(FName);
for i := 1 to TempList.Count-1 do
begin
Line := TempList.Strings[i];
//create a //create a Unique identifier (UID) from elements in Line
Serial := Trim(Copy(Line, 22, 9));
MsnPos1 := Pos('[', Line) + 1;
MsnPos2 := Pos(']', Line);
Msn := copy(Line, MsnPos1, (MsnPos2 - MsnPos1));
UID := Serial + '/' + Msn;
//
if (FVCheckList.IndexOf(UID) < 0) then
begin
FVCheckList.Append(UID);
//Add date of file to Line, otherwise it gives no clue when FV was
FVList.Append(FormatDateTime('YYYY-MM-DD', FileDate) + ' ' + Line);
FileDate := IncDay(FileDate, 1);
FName := 'E:LGW Reports/SBSLGW' + FormatDateTime('YYYY-MM-DD', FileDate) + '.txt';
end;
end;
Until FileExists(FName) = FALSE;
FVCheckList.SaveToFile('E:LGW Reports/First Visit Checklist.txt');
FVList.SaveToFile('E:LGW Reports/First Visits.txt');
Memo1.Lines.Append('Finished');
Memo1.Lines.SaveToFile('E:LGW Reports/Files parsed.txt');
end;
procedure TForm1.FormClose(Sender: TObject; var Action: TCloseAction);
begin
TempList.Free;
FVCheckList.Free;
FVList.Free;
end;
There are no compiler errors, it runs to completion in seconds and produces the two text files specified, correctly formatted. The big problem is that the lines actually listed in FVList are not always the very first visit of the aircraft, they can be the first, the most recent or somewhere in between. I cannot see any obvious clue as to why the wrong instance is appearing: if my code is right, then something is wrong with the functioning of TStringList FVCheckList. The fault is far more likely to be something I have overlooked, or my understanding of how .dupIgnore works, or maybe my looping isn't working as it should.
I should be very grateful for any practical help. Many thanks in advance.
Repeat
...
Until FileExists(FName) = FALSE;
Should be
While FileExists(FName) = TRUE do
Begin
End;
If the first 2007-01-01 file does not exist, your code will crash on the first LoadFromFile() since you don't check for the file's existence before loading it, unlike with the subsequent files.
Otherwise, I would suggest sticking with repeat but assign FName at the top of each loop iteration instead of initializing it outside the loop and then reassigning at the bottom of each iteration. No need to duplicate efforts.
If you check IndexOf() manually, you don't need to use Sorted or dupIgnore at all. This is what you should be doing in this situation. When dupIgnore ignores a new string, Append() doesn't tell you that the string was ignored. To do that, you would have to check whether the Count was actually increased or not.
Inside the outer loop, the reassignment of FileDate and FName should be outside of the inner for loop,not inside the for loop at all.
Try this instead:
procedure TForm1.FormCreate(Sender: TObject);
begin
FileDate := EncodeDate(2007,1,1);
FDStr := FormatDateTime('YYYY-MM-DD', FileDate);
TempList := TStringList.Create; //temp holder for file contents
FVCheckList := TStringList.Create; //holds unique identifier (UID)
FVList := TStringList.Create; //the main output
end;
procedure TForm1.Button1Click(Sender: TObject);
var
i: integer;
begin
Memo1.Lines.Append('Started');
Repeat
FName := 'E:LGW Reports/SBSLGW' + FormatDateTime('YYYY-MM-DD', FileDate) + '.txt';
if not FileExists(FName) then Break;
Memo1.Lines.Append(FName)
TempList.LoadFromFile(FName);
for i := 1 to TempList.Count-1 do
begin
Line := TempList.Strings[i];
//create a Unique identifier (UID) from elements in Line
Serial := Trim(Copy(Line, 22, 9));
MsnPos1 := Pos('[', Line) + 1;
MsnPos2 := PosEx(']', Line, MsnPos1);
Msn := copy(Line, MsnPos1, (MsnPos2 - MsnPos1));
UID := Serial + '/' + Msn;
if FVCheckList.IndexOf(UID) = -1 then
begin
FVCheckList.Append(UID);
//Add date of file to Line, otherwise it gives no clue when FV was
FVList.Append(FormatDateTime('YYYY-MM-DD', FileDate) + ' ' + Line);
end;
end;
FileDate := IncDay(FileDate, 1);
end;
FVCheckList.SaveToFile('E:LGW Reports/First Visit Checklist.txt');
FVList.SaveToFile('E:LGW Reports/First Visits.txt');
Memo1.Lines.Append('Finished');
Memo1.Lines.SaveToFile('E:LGW Reports/Files parsed.txt');
end;
procedure TForm1.FormDestroy(Sender: TObject);
begin
TempList.Free;
FVCheckList.Free;
FVList.Free;
end;
In the following tFDMemTable I try to sum value of records whose ID field starting letter A. A1, A2 and the result should be 4.
type
TForm1 = class(TForm)
FDMemTable1: TFDMemTable;
DBGrid1: TDBGrid;
DataSource1: TDataSource;
Button1: TButton;
Button2: TButton;
procedure FormCreate(Sender: TObject);
procedure Button1Click(Sender: TObject);
procedure Button2Click(Sender: TObject);
end;
procedure TForm1.FormCreate(Sender: TObject);
var
_FieldDef: TFieldDef;
begin
_FieldDef := FDMemTable1.FieldDefs.AddFieldDef;
_FieldDef.Name := 'ID';
_FieldDef.DataType := ftString;
_FieldDef.Size := 5;
_FieldDef := FDMemTable1.FieldDefs.AddFieldDef;
_FieldDef.Name :='value';
_FieldDef.DataType := ftInteger;
FDMemTable1.CreateDataSet;
FDMemTable1.Append;
FDMemTable1.FieldValues['ID'] := 'A1';
FDMemTable1.FieldValues['value'] := 1;
FDMemTable1.Append;
FDMemTable1.FieldValues['ID'] := 'B1';
FDMemTable1.FieldValues['value'] := 2;
FDMemTable1.Append;
FDMemTable1.FieldValues['ID'] := 'A2';
FDMemTable1.FieldValues['value'] := 3;
FDMemTable1.Append;
FDMemTable1.FieldValues['ID'] := 'B2';
FDMemTable1.FieldValues['value'] := 4;
end;
I wrote the following code but it changes tDBGrid as filtered. What I want is just an internal process that tDBGrid should stay without any change.
procedure TForm1.Button1Click(Sender: TObject);
var
_ValueSum: Integer;
i: Integer;
begin
FDMemTable1.Filter := 'ID like ' + QuotedStr('A%');
FDMemTable1.Filtered := True;
_ValueSum := 0;
FDMemTable1.FindFirst;
for i := 0 to FDMemTable1.RecordCount - 1 do
begin
_ValueSum := _ValueSum + FDMemTable1.FieldValues['value'];
FDMemTable1.FindNext;
end;
Button1.Caption := IntToStr(_ValueSum);
end;
I know tDataSet.Locate doesn't allow NEXT SEARCH that I tried a primitive way like this. It works fine but seems a little stupid.
procedure TForm1.Button2Click(Sender: TObject);
var
_ValueSum: Integer;
i: Integer;
begin
_ValueSum := 0;
FDMemTable1.First;
for i := 0 to FDMemTable1.RecordCount do
begin
if Copy(FDMemTable1.FieldValues['ID'], 1, 1) = 'A' then
begin
_ValueSum := _ValueSum + FDMemTable1.FieldValues['value'];
end;
FDMemTable1.FindNext;
end;
Button2.Caption := IntToStr(_ValueSum);
end;
When I disconnect tFDMemTable and tDBGrid or set inactive before filtering to hold the last grid status, the grid changes to blank one. Is the last code the best solution or is there any better way which shows not filtered result while the filtering is working?
There are several things which, if not "wrong", are not quite right with your code.
You should be using Next, not FindNext to move to the next row in the dataset. Next moves to the next row in the dataset, whereas FindNext moves to the next row which matches search criteria you have already set up e.g. using DataSet.SetKey; ... - read the online help for FindKey usage.
You should NOT be trying to traverse the dataset using a For loop; use a While not FDMemData.Eof do loop. Eof stands for 'End of file' and returns true once the dataset is on its last row.
You should be calling FDMemTable1.DisableControls before the loop and FDMemTable1.EnableControls after it. This prevents db-aware controls like your DBGrid from updating inside the loop, which would otherwise slow the loop down as the grid is updating.
Unless you have a very good reason not to, ALWAYS clear a dataset filter in the same method as you set it, otherwise you can get some very confusing errors if you forget the filter is active.
Try to avoid using RecordCount when you don't absolutely need to. Depending on the RDMS you are using, it can cause a lot of avoidable processing overhead on the server and maybe the network (because with some server types it will cause the entire dataset to be retrieved to the client).
Change your first loop to
procedure TForm1.Button1Click(Sender: TObject);
var
_ValueSum : Integer;
begin
_ValueSum := 0;
FDMemTable1.Filter := 'ID like ' + QuotedStr('A%');
try
FDMemTable1.DisableControls;
FDMemTable1.First;
while not FDMemTable1.Eof do begin
_ValueSum:= _ValueSum + FDMemTable1.FieldByName('Value').AsInteger;
FDMemTable1.Next;
end
finally
FDMemTable1.Filter := '';
FDMemTable1.Filtered := False;
FDMemTable1.EnableControls;
end;
Button1.Caption := IntToStr(_ValueSum);
end;
If you do that, you don't need your Button2Click method at all.
As noted in a comment, you can use a TBookMark to record your position in the dataset before the loop and return to it afterwards, as in
var
_ValueSum : Integer;
BM : TBookMark;
begin
_ValueSum := 0;
BM := FDMemTable.GetBookMark;
FDMemTable1.Filter := 'ID like ' + QuotedStr('A%');
try
[etc]
finally
FDMemTable1.Filter := '';
FDMemTable1.Filtered := False;
FDMemTable1.GotoBookMark(BM);
FDMemTable1.FeeBookMark(BM);
FDMemTable1.EnableControls;
end;
By the way, you can save yourself some typing and get more concise code by using the InsertRecord method as in
FDMemTable1.InsertRecord(['A1', 1]);
FDMemTable1.InsertRecord(['B1', 2]);
FDMemTable1.InsertRecord(['A2', 3]);
FDMemTable1.InsertRecord(['B2', 4]);
Btw#2: The time to use FindKey is after you've set up a key to find, using by calling SetKey than then setting the key value(s).
For ordinary navigation of a dataset, use the standard navigation methods, e.g. Next, Prior, First, Last, MoveBy etc.
FireDAC has another interesting option - Aggregates:
procedure TForm1.Button1Click(Sender: TObject);
begin
FDMemTable1.Aggregates.Clear;
with FDMemTable1.Aggregates.Add do
begin
Name := 'SUM';
Expression := 'sum(iif(ID like ''A%'', value, 0))';
Active := True;
end;
FDMemTable1.AggregatesActive := True;
FDMemTable1.Refresh;
Button1.Caption := VarToStr(FDMemTable1.Aggregates[0].Value));
end;
I have a function to update a cxGrid made with help from answers to Loop through records on a cxgrid and update a field/column
But it is sometimes acting a bit strange. If I open the form with the cxGrid and click the columnheader without doing anything else, the records are updateted OK. But if the 'selectorbar' is moved away from the top, the record marked is not updated.
I am sure it is a property that needs to be changed, but which one.
The variable fSelected is set to False at FormShow and is ther so that the user can unselect records as well.
procedure TfrmContactsSelect.colContactSelectedHeaderClick(Sender: TObject);
var
i: Integer;
Index: Integer;
BookMark : TBookMark;
Contact: variant;
begin
if fMulti = True then
begin
Screen.Cursor := crHourGlass;
fSelected := not fSelected;
BookMark := qryContacts.GetBookmark;
qryContacts.DisableControls;
try
for i := 0 to grdContactsView1.DataController.FilteredRecordCount - 1 do
begin
Index := grdContactsView1.DataController.FilteredRecordIndex[i];
Contact := grdContactsView1.DataController.Values[Index, 4];
if grdContactsView1.DataController.LocateByKey(Contact) then
begin
qryContacts.Edit;
qryContacts.FieldByName('fldcontact_selected').AsBoolean := fSelected;
qryContacts.Post;
end;
end;
finally
qryContacts.EnableControls;
qryContacts.GotoBookmark(BookMark);
qryContacts.FreeBookmark(BookMark);
end;
Screen.Cursor := crDefault;
end;
end;
Delphi XE7, DevExpress 14.2.2, UniDAC 5.5.12 for DB access
Comment:
I have ended up with the following solution based on the answer and input from MartynA
procedure TfrmContactsSelect.colContactSelectedHeaderClick(Sender: TObject);
var
i: Integer;
Index: Integer;
MarkedRecord: variant;
CurrentRecord: variant;
begin
if fMulti = True then
begin
Screen.Cursor := crHourGlass;
fSelected := not fSelected;
Index := grdContactsView1.DataController.FocusedRecordIndex;
MarkedRecord := grdContactsView1.DataController.Values[Index, colContactGuid.ID];
try
for i := 0 to grdContactsView1.DataController.FilteredRecordCount - 1 do
begin
Index := grdContactsView1.DataController.FilteredRecordIndex[i];
CurrentRecord := grdContactsView1.DataController.Values[Index, colContactGuid.ID];
if grdContactsView1.DataController.LocateByKey(CurrentRecord) then
begin
grdContactsView1.DataController.Edit;
grdContactsView1.DataController.SetEditValue(colContactSelected.ID, fSelected, evsText);
grdContactsView1.DataController.Post;
end;
end;
finally
grdContactsView1.DataController.LocateByKey(MarkedRecord);
end;
Screen.Cursor := crDefault;
end;
end;
I can reproduce your problem using the sample project I posted in my answer to your other q.
Try this: Add a TMemo to your form, and inside the 'if grdContactsView1.DataController.LocateByKey(Contact) then' block, write the value of a row-unique datafield and the Selected datafield value to the memo.
Then, what I get when some row other than the top row is selected is that one row is listed twice in the memo, with Selected both false and true, and one of the rows in the filter isn't listed at all, which I think accounts for the behaviour you're seeing. If I then comment out the .Edit .. .Post lines, it correctly lists all the rows in the filter.
So evidently doing the Selected field changes inside a block which iterated the FilteredRecordIndex property of the DBTableView is what's causing the problem.
Personally, I find that it goes a bit against the grain to modify dataset rows in code via a DB-aware control (because you usually end up fighting the DB-awareness of the control), but in this case, it's straightforward to do the processing via the DBTableView of the cxGrid.
procedure TForm1.ProcessFilteredRecords;
var
PrevV,
V : Variant;
i,
Index: Integer;
S : String;
begin
// First, pick up a reference to the current record
// so that we can return to it afterwards
Index := cxGrid1DBTableView1.DataController.FocusedRecordIndex;
PrevV := cxGrid1DBTableView1.DataController.Values[Index, 0];
try
for i := 0 to cxGrid1DBTableView1.DataController.FilteredRecordCount - 1 do begin
Index := cxGrid1DBTableView1.DataController.FilteredRecordIndex[i];
V := cxGrid1DBTableView1.DataController.Values[Index, 0];
if cxGrid1DBTableView1.DataController.LocateByKey(V) then begin
cxGrid1DBTableView1.DataController.Edit;
// 2 is the index of my Selected column in the grid
if cxGrid1DBTableView1.DataController.SetEditValue(2, True, evsText) then
Caption := 'OK'
else
Caption := 'Failed';
cxGrid1DBTableView1.DataController.Post;
end;
end;
finally
if cxGrid1DBTableView1.DataController.LocateByKey(PrevV) then
Caption := 'OK'
else
Caption := 'Failed';
end;
end;
Another way to avoid the problem is to change the Selected states in two steps:
Iterate the FilteredRecordIndex to build a list of rows to change - in your case this would be a list of guids
Then, iterate the list of rows and update their Selected states.
Code:
procedure TForm1.ProcessFilteredRecords;
var
V : Variant;
i,
Index: Integer;
BM : TBookMark;
S : String;
TL : TStringList;
begin
Memo1.Lines.Clear;
TL := TStringList.Create;
try
for i := 0 to cxGrid1DBTableView1.DataController.FilteredRecordCount - 1 do begin
Index := cxGrid1DBTableView1.DataController.FilteredRecordIndex[i];
V := cxGrid1DBTableView1.DataController.Values[Index, 0];
if cxGrid1DBTableView1.DataController.LocateByKey(V) then begin
if CDS1.FieldByName('Selected').AsBoolean then
S := 'True'
else
S := 'False';
S := CDS1.FieldByName('Name').AsString + ' ' + S;
Memo1.Lines.Add(S);
TL.Add(CDS1.FieldByName('Guid').AsString);
end;
end;
try
BM := CDS1.GetBookMark;
CDS1.DisableControls;
for i := 0 to TL.Count - 1 do begin
if CDS1.Locate('guid', TL[i], []) then begin
CDS1.Edit;
CDS1.FieldByName('Selected').AsBoolean := True;
CDS1.Post;
end
end;
finally
CDS1.EnableControls;
CDS1.GotoBookmark(BM);
CDS1.FreeBookmark(BM);
end;
finally
TL.Free;
end;
end;
Like you, I was expecting that changing a property or two of the cxGrid might avoid the problem without any code, but I haven't been able to find anything which does.
I am trying to find all files that have the extenstion .cbr or .cbz
If i set my mask to *.cb?
it finds *.cbproj files. How can i set the mask to only find .cbr and .cbz files?
here is code i am using.
I have two edit boxes EDIT1 is the location to search, EDIT2 is where i put my mask. A listbox to show what it found and a Search button.
edit1 := c:\
edit2 := mask (*.cb?)
space
procedure TFAutoSearch.FileSearch(const PathName, FileName : string; const InDir : boolean);
var Rec : TSearchRec;
Path : string;
begin
Path := IncludeTrailingBackslash(PathName);
if FindFirst(Path + FileName, faAnyFile - faDirectory, Rec) = 0 then
try
repeat
ListBox1.Items.Add(Path + Rec.Name);
until FindNext(Rec) <> 0;
finally
FindClose(Rec);
end;
If not InDir then Exit;
if FindFirst(Path + '*.*', faDirectory, Rec) = 0 then
try
repeat
if ((Rec.Attr and faDirectory) <> 0) and (Rec.Name<>'.') and (Rec.Name<>'..') then
FileSearch(Path + Rec.Name, FileName, True);
until FindNext(Rec) <> 0;
finally
FindClose(Rec);
end;
end; //procedure FileSearch
procedure TFAutoSearch.Button1Click(Sender: TObject);
begin
FileSearch(Edit1.Text, Edit2.Text, CheckBox1.State in [cbChecked]);
end;
end.
The easiest way is to use ExtractFileExt against the current filename and check to see if it matches either of your desired extensions.
Here's a fully-rewritten version of your FileSearch routine which does exactly what you're trying to do (according to your question, anyway):
procedure TFAutoSearch.FileSearch(const ARoot: String);
var
LExt, LRoot: String;
LRec: TSearchRec;
begin
LRoot := IncludeTrailingPathDelimiter(ARoot);
if FindFirst(LRoot + '*.*', faAnyFile, LRec) = 0 then
begin
try
repeat
if (LRec.Attr and faDirectory <> 0) and (LRec.Name <> '.') and (LRec.Name <> '..') then
FileSearch(LRoot + LRec.Name)
else
begin
LExt := UpperCase(ExtractFileExt(LRoot + LRec.Name));
if (LExt = '.CBR') or (LExt = '.CBZ') then
ListBox1.Items.Add(LRoot + LRec.Name);
end;
until (FindNext(LRec) <> 0);
finally
FindClose(LRec);
end;
end;
end;
While the other answer suggesting the use of multiple extensions as a mask *.cbr;*.cbz should (in principal anyway) work, I've noted through bitter experience that the FindFirst and FindNext methods in Delphi tend not to accept multiple extensions in a mask!
The code I've provided should work just fine for your needs, so enjoy!
UPDATED: To allow the use of multiple extensions in a Mask dynamically at runtime (as indicated by the OP's first comment to this answer).
What we're going to do is take a String from your TEdit control (this String is one or more File Extensions as you would expect), "Explode" the String into an Array, and match each file against each Extension in the Array.
Sounds more complicated than it is:
type
TStringArray = Array of String; // String Dynamic Array type...
// Now let's provide a "Mask Container" inside the containing class...
TFAutoSearch = class(TForm)
// Normal stuff in here
private
FMask: TStringArray; // Our "Mask Container"
end;
This code will populate FMask with each individual mask extension separated by a ; such as .CBR;.CBZ.
Note this method will not accept Wildcard characters or any other Regex magic, but you can modify it as you require!
procedure TFAutoSearch.ExplodeMask(const AValue: String);
var
LTempVal: String;
I, LPos: Integer;
begin
LTempVal := AValue;
I := 0;
while Length(LTempVal) > 0 do
begin
Inc(I);
SetLength(FMask, I);
LPos := Pos(';', LTempVal);
if (LPos > 0) then
begin
FMask[I - 1] := UpperCase(Copy(LTempVal, 0, LPos - 1));
LTempVal := Copy(LTempVal, LPos + 1, Length(LTempVal));
end
else
begin
FMask[I - 1] := UpperCase(LTempVal);
LTempVal := EmptyStr;
end;
end;
end;
We now need a function to determine if the nominated file matches any of the defined Extensions:
function TFAutoSearch.MatchMask(const AFileName: String): Boolean;
var
I: Integer;
LExt: String;
begin
Result := False;
LExt := UpperCase(ExtractFileExt(LExt));
for I := Low(FMask) to High(FMask) do
if (LExt = FMask[I]) then
begin
Result := True;
Break;
end;
end;
Now here's the modified FileSearch procedure:
procedure TFAutoSearch.FileSearch(const ARoot: String);
var
LRoot: String;
LRec: TSearchRec;
begin
LRoot := IncludeTrailingPathDelimiter(ARoot);
if FindFirst(LRoot + '*.*', faAnyFile, LRec) = 0 then
begin
try
repeat
if (LRec.Attr and faDirectory <> 0) and (LRec.Name <> '.') and (LRec.Name <> '..') then
FileSearch(LRoot + LRec.Name)
else
begin
if (MatchMask(LRoot + LRec.Name)) then
ListBox1.Items.Add(LRoot + LRec.Name);
end;
until (FindNext(LRec) <> 0);
finally
FindClose(LRec);
end;
end;
end;
Finally, here's how you initiate your search:
procedure TFAutoSearch.btnSearchClick(Sender: TObject);
begin
ExplodeMask(edMask.Text);
FileSearch(edPath.Text);
end;
Where edMask is defined in your question as Edit2 and edPath is defined in your question as Edit1. Just remember that this method doesn't support the use of Wildcard or other Special Chars, so edMask.Text should be something like .CBR;.CBZ
If you use the Regex library for Delphi, you could easily modify this method to support all of the Expression Cases you could ever imagine!
Dorin's suggestion to replace your mask with *.cbr;*.cbz should work. That is, it won't match cbproj anymore. It would, however, still match cbzy or any other extension that starts with cbr or cbz. The reason for this is that FindFirst/FindNext match both the long form and the legacy short forms (8.3) of file names. So the short forms will always have truncated extensions where cbproj is shortened to cbp, and therefore matches cb?.
This is supposed to be avoidable by using FindFirstEx instead, but this requires a small rewrite of your search function and actually didn't work for me. So instead I just double checked all matches with the MatchesMask function.
I want to export content of a TQuery to a CSV file without using a 3d part component(Delphi 7). From my knowledge this can not be accomplished with Delphi standard components.
My solution was to save the content in a StringList with a CSV format, and save it to a file.
Is there any comfortable solution?
PS:I don't want to use JvCsvDataSet or any component. Question is: can this be accomplished only with Delphi 7 or higher standard components?
Thank you in advance!
Of course it can.
You just have to do the work to properly output the CSV content (quoting properly, handling embedded quotes and commas, etc.). You can easily write the output using TFileStream, and get the data using the TQuery.Fields and TQuery.FieldCount properly.
I'll leave the fancy CSV quoting and special handling to you. This will take care of the easy part:
var
Stream: TFileStream;
i: Integer;
OutLine: string;
sTemp: string;
begin
Stream := TFileStream.Create('C:\Data\YourFile.csv', fmCreate);
try
while not Query1.Eof do
begin
// You'll need to add your special handling here where OutLine is built
OutLine := '';
for i := 0 to Query.FieldCount - 1 do
begin
sTemp := Query.Fields[i].AsString;
// Special handling to sTemp here
OutLine := OutLine + sTemp + ',';
end;
// Remove final unnecessary ','
SetLength(OutLine, Length(OutLine) - 1);
// Write line to file
Stream.Write(OutLine[1], Length(OutLine) * SizeOf(Char));
// Write line ending
Stream.Write(sLineBreak, Length(sLineBreak));
Query1.Next;
end;
finally
Stream.Free; // Saves the file
end;
end;
The original question asked for a solution using a StringList. So it would be something more like this. It will work with any TDataSet, not just a TQuery.
procedure WriteDataSetToCSV(DataSet: TDataSet, FileName: String);
var
List: TStringList;
S: String;
I: Integer;
begin
List := TStringList.Create;
try
DataSet.First;
while not DataSet.Eof do
begin
S := '';
for I := 0 to DataSet.FieldCount - 1 do
begin
if S > '' then
S := S + ',';
S := S + '"' + DataSet.Fields[I].AsString + '"';
end;
List.Add(S);
DataSet.Next;
end;
finally
List.SaveToFile(FileName);
List.Free;
end;
end;
You can add options to change the delimiter type or whatever.
This is like the Rob McDonell solution but with some enhancements: header, escape chars, enclosure only when required, and ";" separator.
You can easily disable this enhancements if not required.
procedure SaveToCSV(DataSet: TDataSet; FileName: String);
const
Delimiter: Char = ';'; // In order to be automatically recognized in Microsoft Excel use ";", not ","
Enclosure: Char = '"';
var
List: TStringList;
S: String;
I: Integer;
function EscapeString(s: string): string;
var
i: Integer;
begin
Result := StringReplace(s,Enclosure,Enclosure+Enclosure,[rfReplaceAll]);
if (Pos(Delimiter,s) > 0) OR (Pos(Enclosure,s) > 0) then // Comment this line for enclosure in every fields
Result := Enclosure+Result+Enclosure;
end;
procedure AddHeader;
var
I: Integer;
begin
S := '';
for I := 0 to DataSet.FieldCount - 1 do begin
if S > '' then
S := S + Delimiter;
S := S + EscapeString(DataSet.Fields[I].FieldName);
end;
List.Add(S);
end;
procedure AddRecord;
var
I: Integer;
begin
S := '';
for I := 0 to DataSet.FieldCount - 1 do begin
if S > '' then
S := S + Delimiter;
S := S + EscapeString(DataSet.Fields[I].AsString);
end;
List.Add(S);
end;
begin
List := TStringList.Create;
try
DataSet.DisableControls;
DataSet.First;
AddHeader; // Comment if header not required
while not DataSet.Eof do begin
AddRecord;
DataSet.Next;
end;
finally
List.SaveToFile(FileName);
DataSet.First;
DataSet.EnableControls;
List.Free;
end;
end;
Delphi does not provide any built-in access to .csv data.
However, following the VCL TXMLTransform paradigm, I wrote a TCsvTransform class helper that will translate a .csv structure to /from a TClientDataSet.
As for the initial question that was to export a TQuery to .csv, a simple TDataSetProvider will make the link between TQuery and TClientDataSet.
For more details about TCsvTransform, cf http://didier.cabale.free.fr/delphi.htm#uCsvTransform