Using fullpage.sty in a document preamble breaks latex preview by generating a full page preview images with page numbers. I.e., this code:
#+LATEX_CLASS: article
#+LATEX_CLASS_OPTIONS: [a4paper]
#+LATEX_HEADER: \usepackage{fullpage}
\begin{equation}
E=mc^2
\end{equation}
will generate the preview image:
How to exclude fullpage package from LaTeX preview preamble? Also, is it a bug and needs a bug report?
according to org-latex-preview#Minted if you add the fullpage.sty package to org-latex-packages-alist in your emacs configuration file like so:
(add-to-list 'org-latex-packages-alist '("" "fullpage" nil))
it should use it for exporting but not for the preview.
Related
I am wanting to do in text citations for my dissertation. I will upload a simplified version of what i am seeing. The issue is that i keep getting "undefined citations" where i only get the citation key out in my pdf irrespective of which compiler i use.
I also keep getting an error saying that the bibliography is empty. But when my friend uses the exact code i have and copies the references and everything into his overleaf environment it works. I could not get it working with miktex and texmaker. Please help
I have checked a lot of articles of what is available and i swear im following what they are doing but i cant get any further
Initially, my idea is to pull the citations from another file because ill be using these citations in multiple documents. I have successfully setup the .bib file which will update as i add more references to Zotero (my reference manager). I tried to pull citations from the .bib file by coding in the file directory, but no luck there.
I then tried to not use the "file directory approach" and just have a references file in the same folder as the .tex file. But that didnt work either.
my code is as follows:
\documentclass[11pt]{article}
\usepackage{geometry}
\usepackage{latexsym}
\usepackage{graphicx}
\usepackage[style=ieee]{biblatex}
\addbibresource{refs.bib} %%updated from References.bib
%document headings
\title{Practice}
\author{Justin Smith}
\begin{document}
%Cover Page
\maketitle
\textbf{This page represents the cover page}\newline
\textit{Report will begin here}
\thispagestyle{empty}
\pagebreak
%Introduction
\section{Introduction}
The introduction for the report will be inserted here
\pagebreak
%end Introduction
%Literature Survey
\section{Literature Survey}
\subsection{Referencing Examples}
This section serves to use a reference and understand how to implement references as well as generate a reference list at the end of this report.\\
The citation test \cite{schmidtPreprocessingMethodologyEnhance2019}\\
\pagebreak
%Reference List
\section*{Reference List}
%%\bibliographystyle{IEEE}
%%\bibliography{C:/Users66smi/OneDrive/University of Pretoria/Zotero/MyZoteroLibrary.bib}
%%\printbibliography[title = Reference List]
%%\bibliography{MyZoteroLibrary.bib}
\end{document}
EDIT:
Upon trying to do what #celdor initially said said i still run into the same issue. The following screenshots add to the initial question.
Screenshot showing code and issue directly
Screenshot showing Latex "Configure" settings
From the Log file, the following logs detail relevant warnings
LaTeX Warning: Citation 'schmidtPreprocessingMethodologyEnhance2019' on page 3
undefined on input line 36.
Underfull \hbox (badness 10000) in paragraph at lines 36--37
[]
[3]
LaTeX Warning: Empty bibliography on input line 39.
(Latex test.aux)
LaTeX Warning: There were undefined references.
Package biblatex Warning: Please (re)run Biber on the file:
(biblatex) "Latex test"
(biblatex) and rerun LaTeX afterwards.
Package logreq Info: Writing requests to '"Latex test".run.xml'.
\openout1 = `"Latex test.run.xml"'.
)
Extra information:
The following screenshots are of the Project folder
First, latexsym is an old package superseded by amssymb. I looked at the file and its last update was in 1998!
As to your issues, assuming your text file is main.tex, try the following:
Clean your project folder from all auxiliary *.aux; the best way to do that is to issue latexmk -C in your project folder.
Additionally, remove main.bbl
make sure your *.bib file is in the root project folder
add backend=biber to list of options of biblatex.
Then, run:
pdflatex main.tex # or xelatex main.tex or lualatex main.tex etc.
biber main
pdflatex main.tex # see above
Without *.bbl file, the first run of pdflatex does not produce any reference list and latex may issue a warning. With an old *.bbl file, you will get wrong citations. After the whole sequence is executed, main.pdf should have the correct citation and a reference list.
Remember \bibliography is incompatible with biblatex. The correct macro to create bibliography list is \printbibliography. It will issue \section* in article or \chapter* in report/book for a title and format it according to settings in a document class.
Here, I created References.bib with a dummy article:
#ARTICLE{schmidtPreprocessingMethodologyEnhance2019,
author = {Other, Anthony Norman},
title = {Some things I did},
year = {2014},
journal = {J.~Irrep. Res.},
volume = {1},
number = {1},
pages = {1-10}
}
and run the code as suggested, and frankly I get expected results without any errors!
The full code:
\documentclass[11pt]{article}
\usepackage{geometry}
\usepackage{amssymb} %superseds latexsym
\usepackage{graphicx}
\usepackage[backend=biber,style=ieee]{biblatex}
\addbibresource{References.bib}
%document headings
\title{Practice}
\author{Justin Smith}
\begin{document}
%Cover Page
\maketitle
\textbf{This page represents the cover page}\newline
\textit{Report will begin here}
\thispagestyle{empty}
\pagebreak
%Introduction
\section{Introduction}
The introduction for the report will be inserted here
\pagebreak
%end Introduction
%Literature Survey
\section{Literature Survey}
\subsection{Referencing Examples}
This section serves to use a reference and understand how to implement references as well as generate a reference list at the end of this report.\\
The citation test \cite{schmidtPreprocessingMethodologyEnhance2019}\\
\clearpage
\printbibliography[title = Reference List]
\end{document}
and here's the screenshot:
The answer as suggested by #samcarter_is_at_topanswers.xyz
is that I was not using biber.
To do this on textmaker proceed to Options/Configure Textmaker. A configuration window will appear. Under the Commands Window locate "Bib(la)tex" and set the designation to "biber %". This will solve the issue.
Setting Update
A similar procedure can be followed on texstudios
See the below link on how to make sure textmaker uses this setting for reference.
https://tex.stackexchange.com/questions/44040/biblatex-biber-texmaker-miktex
thank you for everyones efforts in solving this problem.
This is my Rmarkdown code:
---
title: "My Title"
header-includes:
- \usepackage{calligra}
- \usepackage[T1]{fontenc}
output:
pdf_document:
latex_engine: xelatex
---
# Section 1
This is an R Markdown document. Markdown is a simple formatting syntax for authoring HTML, PDF, and MS Word documents. For more details on using R Markdown see <http://rmarkdown.rstudio.com>.
When you click the **Knit** button a document will be generated that includes both content as well as the output of any embedded R code chunks within the document. You can embed an R code chunk like this:
I was studying the best way to change fonts in Rmarkdown. In texlive the installed calligra package appears and calligra-type1 also.
When I run the script with the calligra package it generates the pdf but the font does not match the calligra font.
And when I run the script for calligra-type1 the pdf is not even generated.
Any help, guys?
The calligra.sty does not set-up the Calligra as default font, but you can do so by adding
\renewcommand{\rmdefault}{calligra}
to header-includes.
BTW, there is no need to call fontenc.sty, since calligra.sty does so already. In addition, using xelatex is not necessary here.
I'm trying to set a image (Canadian flag) as a command in my latex résumé project. I am a beginner in latex and I'm trying to replicate another command definition based on fontawesome package (pre-define images), but by integrating an image.
Here's the original command that works (faAt comes from fontawesome package):
\newcommand{\emailsymbol}{\faAt}
\newcommand{\email}[1]{\printinfo{\emailsymbol}{#1}}
Here's my try that doesn't work:
\newcommand{\canflag}{\def\#canada.png}
\newcommand{\canadaflag}[1]{\printinfo{\canflag}{#1}}
Any idea on how to achieve what I'm trying to do?
You can graphicx package to achieve this
\documentclass[12pt]{article}
\usepackage{graphicx}
\newcommand\canadaflag{\includegraphics[height=8pt]{flag}}
\begin{document}
\section{Before you start}
\canadaflag You are now using...
\end{document}
I'm using ubuntu16, i've intalled latex full version and texmaker. Im writing a document and when compiling the bibliography i get this message:
!LaTeX Error: File `bibtex.sty' not found.
What can i do? S.O.S its driving me crazy
\documentclass[12pto,a4paper,oneside]{book}
\usepackage[portuguese]{babel}
\usepackage{bibtex}
\addbibresource{/chapters/reference.bib}
\begin{document}
blablablablablablablablablablablablab \parencite{author-bibliography}
\begin{appendix}
\end{appendix}
\listoffigures
\listoftables
\printbibliography
\end{document}
Please fix the 1st line that should say 12pt
Be sure that bibtex is installed. On my computer tex live tools does the work.
I downloaded the .rar from your university.
Be sure that you have these packages installed:
lastpage
chngcntr
babelbib
I did open exemplo-diss.tex and then I run latex+bibtex+latex and it works.
In my document i'm using the package glossaries to create a glossary. Everything works fine except that the is no link between the words in the text and the corresponding entry in my glossary (so you can click the word to be explained and get to the glossary entry).
The most important parts of my document:
%----Header----
...
\usepackage[nonumberlist,acronym,toc,style=altlist]{glossaries}
\usepackage[
colorlinks=true,
pdfborder=0 0 0,
pdfpagelabels,
plainpages=false,
linktocpage=false,
pdfcreator={LaTeX}]{hyperref}
...
%Glossary entries
\newglossaryentry{glos:twitter}{name=Twitter,
description={Mikroblogging-Service.}}
%----Main document----
\begin{document}
\chapter{Introduction}
This text is a normal glossary item: \gls{glos:twitter}.
This text should also link to the glossary item: \glslink{glos:twitter}{Link to Twitter}
but there is no link
...
\printglossary
\end{document}
As you see i'm also using the package hyperref, but there seems to be no mechanism that automatically links words in the main text to the glossary.
I also tried to use \ref and \label, but this doesnt' work when the element that is referred is outside the main document (like my glossary is).
I'm using the makeglossaries-script coming from miktex (calling makeglossaries main on build), but this also doesn't give me a link.
Anyone knows a way to do that? Or maybe i should use another package than glossaries which supports a functionality like that?
I would also appreciate any working examples where this functionality works.
EDIT:
I just got a working minimal example where gls/glslink actually works. Seems like the linking of glossary items interfers with one of the packages im using in my document. Will have to try by adding my packages one by one to the example to see which package is the reason. The example:
\listfiles
\documentclass{article}
\usepackage[
colorlinks=true,
pdfborder=0 0 0,
pdfpagelabels,
plainpages=false,
linktocpage=false,
pdfcreator={LaTeX}]{hyperref}
\usepackage[nonumberlist,acronym,toc,style=altlist,]{glossaries}
\makeglossaries
%Glossary entries
\newglossaryentry{glos:twitter}{name=Twitter,
description={Mikroblogging-Service.}}
%----Main document----
\begin{document}
\chapter{Introduction}
Ein normales Wort aus dem Glossar: \gls{glos:twitter}.
Dieses Wort soll zum Glossar verlinkt werden: \glslink{glos:twitter}{Link to Twitter}
funktioniert aber nicht...
\clearpage
\printglossary
\end{document}
As not mentioned in the extract of my latex-code, in my documentclass, the draft property was set to true. When removing this property or setting it to false, the gls/glslink work fine.