I am trying to set up my Env to use PostgreSQL with Rails and i followed the steps to install PostgreSQL from this Article
Am getting the following error
ATAL: database "myapp_development" does not exist Extracted source
(around line #661):
rescue ::PG::Error => error
if error.message.include?("does not exist")
raise ActiveRecord::NoDatabaseError.new(error.message, error)
else
raise
end
Did you run rake db:create and rake db:migrate before rails server?
UPDATE
Here's all the steps you should do:
cd /your/app/path
bundle install
bundle exec rake db:create
bundle exec rake db:migrate
bundle exec rails server
Run
rails db:create
before running
rails db:migrate
You can also create PostgreSQL database manually by using psql command prompt.
When in there, connect to your local server and write "create database myapp_development;" without the quotes
I was having a similar problem. I checked different websites and tried what they suggested but didn't work. Then I tried rake db:create:all and rake db:migrate it worked for me. Thank you!
You can fix it by:
bundle exec rake db:setup
In my case, the solution was to provide what the error said.."create the database that does not exist"....I spent many hours trying different commands or run db:migrate using bundle but none of that worked. I thought it should create the db on it's own but no...I eventually decided to create the db in postgres
sudo su - postgres
psql
CREATE DATABASE tableNameFromDatabase.yml WITH OWNER myusername;
after this rails db:migrate worked
I cloned my project. Bundled with "bundle install", then run "rake db:migrate". I am getting this error: (when I run the rails server and open my browser to localhost:3000) "Migrations are pending; run 'bin/rake db:migrate RAILS_ENV=development' to resolve this issue."
I checked all migrations one by one and all were executed without errors. Also no errors were shown after the execution of "rake db:migrate".
This is what I see when I execute "rake db:migrate:status"
I am on development environment. Please let me know if you need any other information.
I also tried "bundle exec rake db:migrate", and "bundle exec rake db:migrate:reset" as "burninggramma" suggested.
Any clues what causes the error?
Interesting. Did you run rake db:create? Assuming you are using sqlite3, do this:
rm -f db/*.sqlite3
rake db:create
RAILS_ENV=development bundle exec rake db:migrate
rails s -e development
Also, can you list the contents of your config/database.yml file?
Edit: Warning! Obviously, you will lose your existing data.
After running the migrate command, I still had the same error.
What worked for me was to just stop the rails server and start it again.
List your executed migrations with rake db:migrate:status and look if every migration was executed. You can try to cancel your migration with rake db:abort_if_pending_migrations and try to migrate again.
1. Maybe its default in ruby2/rails4 but have you tried: bundle exec rake db:migrate?
2. Another option would be resetting the whole database - use with CAUTION! resets all the data as well - bundle exec rake db:migrate:reset
+) I would just make sure that you are executing everything in the same development env:
RAILS_ENV=development bundle exec rake db:migrate:reset
RAILS_ENV=development bundle exec rails s
Running rake db:migrate RAILS_ENV=test did it for me
I had the same error in the browser, but upon closely looking at the error message, I noticed some how I had an extra white space in the migrate comment and post files. Once I removed it, it worked perfectly.
Open the database and click schema_migration table. The migrations will be listed as below.
Sort the version column and find the latest migration you want to go back. Delete or Insert a new one. Rails keeps all the migration history in this table, so you can adjust the migration history to you liking.
I got the same error working on the Learn Enough to Be Dangerous Rails tutorial. I'm using Git Bash terminals on a Windows 10 machine. The error showed up in the terminal where I'm running guard, after I tried to migrate my db using the command (in another terminal):
$ bundle exec rake db: migrate:
After trying the solution offered by #lewstherin, I still got the same error. I tried the command:
$ rails test
And got the explicit and helpful warning:
Migrations are pending. To resolve this issue, run:
bin/rails db:migrate RAILS_ENV=test
I ran the command:
$ bin/rails db:migrate RAILS_ENV=test
and now I'm working again.
For me i just had to migrate for the error:
rake db:migrate --trace
By setting false to config.active_record.migration_error in development.rb might make it workable but i wouldn't recommend it.
Here's what worked for me:
-gem install rails -v 4.1.0
Inside Gemfile:
-gem 'rails', '4.1.0'
(replace the newer/older with this)
Do bundle install and update
-bundle install
-bundle update
In your application.rb :
Remove/Comment - config.active_record.raise_in_transactional_callbacks = true
run bundle rake:
-bundle exec rake db:migrate
Refresh your page and the error should be gone.
Two reasons 'db:migrate:reset' did not work for me
1) loosing data
2) we moved from php to rails, so we had an existing DB and the migrations were written on top of it not from the scratch
So What I tried is to update the 'scheema_migrations'(mysql) table with the list of migrations(just version values) that I was really sure were already run on my db(development), this can be lil time consuming process but it works. I would not attempt this on production though.
I'm guessing the error is that you are creating a table that already exists, I had this problem before.
Step 1
look into the error when you rake dv:migrate
Step 2
go to the model where this table is created
Step 3
add drop_table :[YOUR TABLE] right before the create_table :[YOUR TABLE]
Step 2
run rake db:migrate
Step 3
remove the drop_table once the your migration is done
I had the same problem in genieacs and this code helped:
rake db:drop rake db:create rake db:schema:load RAILS_ENV=development
rake db:migrate rails s -e development
You can always run rake db:reset
I'm following along with some tutorials and they are teaching how to create and run migrations. All has been working so far but I have run in to a problem. But now when i have come back to it the migration will not work in the development database. I used rake db:migrate RAILS_ENV=production to see if my migrations work and on that database it can go through all the migrations and back down again with no problems are errors but when I run rake db:migrate RAILS_ENV=development it pauses for a few seconds then returns me to the console awaiting a command. No errors are shown or nothing is returned to show what it has done and when checking the DB nothing has changed. What can this be?
Use --trace
rake db:migrate --trace
Show your database.yml file please.
I have a host at Linode and am trying to run a Rake task on it, but I get a mySQL error saying it can't connect. It looks like it thinks it is on dev. I did some Googling and saw that I can do something like this:
bundle exec rails c
It loads the dev environment and I can't run User.all giving me an access denied error.
If I run bundle exec rails c RAILS_ENV=production I get the error:
Rails.env=production database is not configured (ActiveRecord::AdapterNotSpecified)
However, if I access it via the web, everything is OK. I was able to run rake db:seed before so I know that there's some way around this.
Accessing mySQL with the production credentials works fine.
Any ideas?
Try this:
rails c production
or, at the beginning:
RAILS_ENV=production rails c
It thinks you're passing RAILS_ENV=production as an argument when you put it at the end.
If you want to run your console in the context of the current bundle in your Gemfile and ensure you're using your Gemset use:
bundle exec rails c production
This works for me. It depends on how your server and all its dependencies are set up:
RAILS_ENV=production bundle exec rails console
I pushed an update to my Rails app production server, and in the update there was a new database migration. I ran rake db:migrate and got the common error seen here. I ran the rake again in bundle exec bash and it was successful. But after restarting my apache server, I'm now getting the 500 Error page. This update worked fine on my localhost, and was mostly this update to the db with supporting changes in the according view and controller/routing.
I don't even know why this error appeared this time, as I have pushed db updates successfully before using only rake. Nonetheless, the rake was successful. The 500 error page only shows on pages that require that specific new ActiveRecord. Any ideas on how to debug?
EDIT: My problem was an extremely simple one. I merely forgot to include the environment with the rake:
bundle exec rake db:migrate RAILS_ENV=production
Unfortunately, it took quite a while to narrow that down, as I couldn't use IRB to check the db entries until I followed these steps.
Did you run rake db:migrate on your server? Also be sure to set the RAILS_ENV flag so your production database is updated:
rake db:migrate RAILS_ENV=production