I have a small amount of data to show in a table and so I would like to load it all. Below is my code and for some reason nothing is showing up. Can you please have a look at what I have done wrong. Thanks
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
NSString *CellIdentifier = [NSString stringWithFormat:#"S%1dR%1d",indexPath.section,indexPath.row];
TableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[TableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
// Configure the cell...
long row = [indexPath row];
cell.BBname.text = _BBNames [row];
cell.BBtype.text = _BBTypes [row];
cell.BBimage.image = [UIImage imageNamed:_BBImages [row]];
if([self getCheckedForIndex:indexPath.row]==YES)
{
cell.accessoryType = UITableViewCellAccessoryCheckmark;
}
return cell;}
is "TableViewCell" your custom cell?
if not use "UITableViewCell" instead
if you are using interface builder for your custom cell, use initializer
[[NSBundle mainBundle] loadNibNamed: owner: options:]
also make sure your tableview delegate is set, specifically implement
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath
Related
I have a tableview which shows data. But i want to customize the cells and i need a little help. So i have a nib for the tableview (HistoryViewController.xib). I just added the class and nib to customize the tableview cells (HistoryViewTableCell).
What are the steps i have to do next? I have this code already:
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
{
return [tableData count];
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *simpleTableIdentifier = #"TableItem";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:simpleTableIdentifier];
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:simpleTableIdentifier];
}
NSDictionary * tempDictionary = [tableData objectAtIndex:indexPath.row];
cell.textLabel.text = [tempDictionary objectForKey:#"PickupAddress"];
return cell;
}
Try this link ..
Custom UITableViewCell Using Interface Builder
good demo with project try this
Customize Table View Cells for UITableView
hope it helps.
Please try below code -
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
HistoryViewTableCell *cell = [tableView dequeueReusableCellWithIdentifier:#"HistoryViewTableCell"];
if (cell == nil) {
// Create a temporary UIViewController to instantiate the custom cell.
UIViewController *temporaryController = [[UIViewController alloc] initWithNibName:#"HistoryViewTableCell" bundle:nil];
// Grab a pointer to the custom cell.
cell = (HistoryViewTableCell *)temporaryController.view;
}
return cell;
}
OR
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
HistoryViewTableCell *cell = [tableView dequeueReusableCellWithIdentifier:#"HistoryViewTableCell"];
if (cell == nil) {
// Load the top-level objects from the custom cell XIB.
NSArray *topLevelObjects = [[NSBundle mainBundle] loadNibNamed:#"HistoryViewTableCell" owner:self options:nil];
// Grab a pointer to the first object (presumably the custom cell, as that's all the XIB should contain).
cell = [topLevelObjects objectAtIndex:0];
}
return cell;
}
I am trying to make a custom tableview cell for an iPad app, using the Parse framework. When i query without the custom cell, it works fine, but as soon as i am changing the cell identifier, i am just stuck at the loading icon.
The code goes as follows:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath object:(PFObject *)object {
static NSString *CellIdentifier = #"specielCelle";
sagerCelle *cell = (sagerCelle *)[tableView dequeueReusableCellWithIdentifier:CellIdentifier forIndexPath:indexPath];
if (cell == nil) {
cell = [[sagerCelle alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
// Configure the cell
cell.lblPolice.text = [object objectForKey:#"police"];
//cell.textLabel.text = [object objectForKey:self.textKey];
//cell.imageView.file = [object objectForKey:self.imageKey];
return cell;
}
Here my advices,(By the way the question is not clear)
Firstly change your identifier with an indexpath.Row
NSString *cellIdentifier=[NSString stringWithFormat:#"CELL_%d",(int)indexPath.row];
Second
if you are changing your existing cell then you are not be able to go inside of the block of
if(cell==nil)
because your cell is not nil. Write else condition.
Hope it helps.
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = #"GenusNameCell";
GenusNameCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[GenusNameCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:#"GenusNameCell"];
cell.GenusNameLabel.text = [genusName objectAtIndex:indexPath.row];
[cell setAccessoryType:UITableViewCellAccessoryDisclosureIndicator];
}
return cell;
}
I have a tableview with an Array of objects but when I run it. Nothing shows up. Im fairly new to xcode but Im not sure what my mistake is in the code. Can some one help me out?
If the cellForRowAtIndexPath callback is never called, it could be:
you didn't have set the dataSource of your tableview;
you didn't implement the numberOfSectionsInTableView: and/or tableView:numberOfRowsInSection: callbacks.
And if you dequeue your cell, you need to set the text outside the if branch like this:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = #"GenusNameCell";
GenusNameCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[GenusNameCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:#"GenusNameCell"];
[cell setAccessoryType:UITableViewCellAccessoryDisclosureIndicator];
}
cell.GenusNameLabel.text = [genusName objectAtIndex:indexPath.row];
return cell;
}
Change the code like this your code will run,
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = #"GenusNameCell";
GenusNameCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[GenusNameCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:#"GenusNameCell"];
[cell setAccessoryType:UITableViewCellAccessoryDisclosureIndicator];
}
cell.GenusNameLabel.text = [[genusName objectAtIndex:indexPath.row] geniusname];
return cell;
}
geniusname is the NSString you stored the name of the person.
have a UITableViewCell "postCell" that is an IBOutlet and is attached to a cell I have placed in my .xib. To set the text label:
- (void)viewDidAppear:(BOOL)animated
{
postCell.textLabel.text = #"TEXT";
}
Nothing ever appears.
Edit: This cell is not part of a Table View. Every answer I have seen is assuming it is. This is a single UITableViewCell.
- (NSInteger) tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section {
return 1;
}
- (UITableViewCell *) tableView:(UITableView *)tableView cellForRowAtIndexPath: (NSIndexPath *)indexPath {
static NSString *CellIdentifier = #"Cell";
PostCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[PostCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
cell.textLabel.text = #"text";
return cell;
}
You can set text label for the cell in method cellForRowAtIndexPath, please see example below.
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = #"Cell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator;
}
cell.textLabel.text = #"Cell Title";
return cell;
}
There are a few delegate methods that you need to implement. Here are the two most important ones
tableView:cellForRowAtIndexPath:
tableView:numberOfRowsInSection:
Here's a full tutorial on how to implement a table view.
http://www.raywenderlich.com/?p=1797
In my project I have tableViews with static cells as well as tableViews with dynamic cells. In order to customized I've managed to get a gradient background on the cells (grouped sytle).
It works ok with dynamic TableViews as I set the background view in cellForRowAtIndex... according to the position of the row (Top, Bottom, Middle or single).
However, when I try to implement it on the static tableview cells, it doesn't work. I've tried to implement the cellForRowAtindex... but it crashes.
Does someone have an idea?
Update: the code for cellForRow..
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = #"Cell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
UACellBackgroundView *bgw=[[UACellBackgroundView alloc]init];
if (indexPath.row==0) {
bgw.position = UACellBackgroundViewPositionTop;
cell.backgroundView=bgw;
}else if (indexPath.row==2){
bgw.position = UACellBackgroundViewPositionBottom;
cell.backgroundView=bgw;
}else {
bgw.position = UACellBackgroundViewPositionMiddle;
cell.backgroundView=bgw;
}
// cell.backgroundView=bgw;
return cell;
}
By the way, the Background view I got it from here: http://code.coneybeare.net/how-to-make-custom-drawn-gradient-backgrounds and here: http://pessoal.org/blog/2009/02/25/customizing-the-background-border-colors-of-a-uitableview/
if somebody is interested
It doesn't look like you are alloc the UITablViewCell, you need to alloc the cell.
For example:
- (UITableViewCell *)tableView:(UITableView *)tableView
cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = #"Cell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
// alloc the UITableViewCell
// remeber if you are not using ARC you need to autorelease this cell
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
cell.textLabel.text = #"Cell Name";
cell.detailTextLabel.text = #"Cell Detail";
return cell;
}
Add this statement:
if (cell == nil) {
// alloc the UITableViewCell
// remeber if you are not using ARC you need to autorelease this cell
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
If you have a UITableViewController subclass with a static table you should not try to dequeue cells.
Instead you should ask super for the cell. The superclass will get the cell from the storyboard and you can configure it.
Something like this:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
UITableViewCell *cell = [super tableView:tableView cellForRowAtIndexPath:indexPath];
UIView *selectedBackgroundView = [[UIView alloc] init];
cell.selectedBackgroundView = selectedBackgroundView;
cell.selectedBackgroundView.backgroundColor = [UIColor mb_tableViewSelectionColor];
return cell;
}
Works for all other attributes as well.