I created a project in CppCheck named CppCheck_MainRls.cppcheck
that includes several directories, i can run the project from the gui and it's working.
my project is huge so i only need a few directories to pass through CppCheck and export the result into xml file (later to be read by jenkins)
The current command line is:
"C:\Program Files (x86)\Cppcheck\CppCheck.exe" --enable=all --xml-version=2 "C:\Program Files (x86)\Jenkins\jobs\MainRls\workspace\Labs\VC++\AllShared" 2> cppcheck_result.xml
which is working great for the "AllShared" directory, how can i change it to read my project file?
I am a cppcheck developer. Currently, you can't use a gui project file directly in the shell client. However it is a good idea to allow it.
As of April 2020 (cppcheck v1.90), this is supported per the cppcheck manual (PDF) section 3.1:
3.1 Cppcheck GUI project
You can import and use Cppcheck GUI project files in the command line tool:
cppcheck --project=foobar.cppcheck
Related
This is using C# coded using Microsoft Visual Studio 2019 Professional
I have an XML file used as a configuration in my program that I am coding. The executable reads and writes to the XML file. So I would naturally like to have an automatic process where the XML file is moved from where it resides among of the source to where the compiled executable will be built. I imagine the moving of the xml file could be done during the pre-build or post-build process. And so, I tried adding some "xcopy" messages in the "Build Events" box that is found in the Properties setting of the project file. Another optioni, I assume, is to edit the project file by hand using a text editor. But I am not accustomed to the scripting language of this code. When I tried to type the pre-build commands I tried:
xcopy config.xml $(OutDir)config.xml
and the error during the Build is
The command "xcopy config.xml bin\x64\Debug\config.xml" exited with code 4.
Please help.
When i build my project for coverage testing with "--coverage -fprofile-arcs -ftest-coverage", and then move the build and source to the other user directory to execute testing. I will get so many problems such as "xxx/cc/cc/getopt_log.c:cannot open source file"
the details as the below:
Processing cs/CMakeFiles/cfa/__/src/base/fault_injection.c.gcda
/home/cov/build/xfcq/src/base/fault_injection.c:cannot open source file
the path of "/home/cov/build/xfcq/src/base/fault_injection.c" is the path of build environment, how to change it as the relative path or the path I specified.
I tried to use GCOV_PREFIX and GCOV_PREFIX_STRIP, these can't work well for me.
I also tried to add -b option for lcov, it does not also work well for me.
e.g., lcov --gcov-tool=/bin/gcov -d . -b xx/src -t "xfcq" -o test_cov.info
do you have idea to resolve it?
Well for using gcov coverage process you should never move the files after building your project, instead you should modify your automated build scripts to build everything to the desired location.
When you compile your project with the specified options it generates *.gcno files for each source file which are necessarily the flow chart like details of the relevant source file.
So, the object files are instrumented in such a way that they should trigger function(added by compiler to generate coverage info ) whenever any line of statement is executed to generate *.gcda files with all the execution information.
Note: I can see that you have specified three options in question (--coverage -fprofile-arcs -ftest-coverage) which is again wrong, as --coverage works as a replacement to the other two.
If you specify only --coverage then it will do for the compilation and the linking too.(remember to use it at both the places positively though)
Im trying to setup jenkins in my company and Ive got some problems.
Im using this commands to build the project:
SET MSBuild="C:\Windows\Microsoft.NET\Framework\v3.5\MSBuild.exe"
SET BUILDS=C:\Program Files (x86)\Jenkins\jobs\xxx\builds\
SET OUTPUT_PATH="%BUILDS%%BUILD_NUMBER%"
SET RSVARS="C:\Program Files (x86)\Embarcadero\RAD Studio\10.0\bin\rsvars.bat"
CALL %RSVARS%
SET PATH=%PATH%;D:\komponenty\DXE3\ADSI
%MSBuild% xxx.dproj /t:Build /p:Config=Debug;Platform=Win32;DCC_ExeOutput=%OUTPUT_PATH% /maxcpucount:4
It works fine when i type this in cmd but. I gave administrive privileges to jenkins service. When I try to build project with jenkins i receive error like this:
F1026: File not found: 'ADSI.dcu
this is a component for Delphi and i have this component on second partition. Jenkins has access for many components on this partition but not for this one.
The difference between the two will be your current directory.
Jenkins will start you off in a specific working folder for the job (possibly C:\Users\<User-ID>\.jenkins\jobs\<Job-Name>\workspace).
Add the following to your Jenkins commands to see where you're doing the build from:
echo Current Folder: %cd%
A simple "solution" would be to just add a command in Jenkins to change directory to the same folder you're in when you test from the command-line.
However, I suggest you rather do the following:
Ensure Jenkins gets the latest source from your source repository into its working folder. (There are various plugins depending on what particular tool you use.)
Ensure you cd (change directory) to the correct folder within the workspace folder.
I have a Visual Studio 2013 solution with the full Orchard source code. When I use "Publish..." on the "Orchard.Web" project in Visual Studio, it correctly publishes the site to the File System destination I've configured into the .PubXml file that I used.
However, if I build this site using Jenkins, the files do not get copied to the destination. I've created a separate PubXml file that is used by Jenkins.
In my Jenkins job, I have two Build steps of interest. The first uses the src\Orchard.sln file with a command line argument of /p:Configuration=Release. This runs correctly, and builds the entire solution.
The second Build step, immediately after, uses the Build File of src\Orchard.Web\Orchard.Web.csproj and these command line arguments:
/p:DeployOnBuild=true
/p:PublishProfile="D:\workspace\Site\trunk\src\Orchard.Web\Properties\PublishProfiles\Jenkins.pubxml"
/p:VisualStudioVersion=12.0
/p:Configuration=Release
/p:Platform=AnyCPU
/v:minimal
/nologo
/p:WarningLevel=1
With this, the build and deploy seems to work - but doesn't. Here are some lines from the build output:
Copying all files to temporary location below for package/publish:
obj\Release\Package\PackageTmp.
Auto ConnectionString Transformed obj\Release\Package\PackageTmp\Shapes\Scripts\Web.config into obj\Release\CSAutoParameterize\transformed\Shapes\Scripts\Web.config.
(... about 200 more "Auto ConnectionString..." lines...)
Finished: SUCCESS
No where does it actually copy the files to the destination defined in the PUBXML file.
In contrast, in Visual Studio, the output looks similar, but transforms only 4 config files and includes lots of "Publishing folder x" lines:
(...)
Transformed Modules\SH.GoogleAnalytics\web.config using ....
Copying all files to temporary location below for package/publish:
obj\Release\Package\PackageTmp.
Publishing folder /...
Publishing folder bin...
(etc.)
(I have installed the latest Windows Azure SDK for .NET on the Jenkins server.)
I have the same trouble,that work for me:
/t:Rebuild
/p:DeployOnBuild=true
/p:PublishProfile=Jenkins_Publish
/p:Configuration=Release
do not use /p:VisualStudioVersion=xxx
This is kind of old, but I actually just set up Orchard to be able to get built via command line and MSBuild. Here is what I did:
/p:VisualStudioVersion=12.0;PublishProfile="example-profile";DeployProjA=true;FrameworkPathOverride="C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\v4.5";Configuration=Release;PublishProfileRootFolder=c:\Workspace\src\Orchard.Web\Properties\PublishProfiles;Password=ExamplePass
Since you are using Orchard you want to make sure that only the Orchard.Web project gets published so do not use DeployOnBuild=true. This will attempt to deploy every web project in the solution, which is a lot for Orchard. Instead follow the guidelines here to see how to deploy only the web project: http://sedodream.com/2013/03/06/HowToPublishOneWebProjectFromASolution.aspx
With Dart's "pub" tool and its "deploy" command, you can create a deployable version of your Dart web application. The output is written to the "deploy" directory. I want to know if there's a way to specify a different output directory?
I searched the internet for a command-line option, but found no mention of it. Running "pub help deploy" shows no options for the deploy command.
If "pub deploy" has no output directory option, I want to find the pub.dart source code. I'll create a customized version that accepts an output directory option. Unfortunately, I can't find pub.dart in the SDK. I found the pub shell script. It calls pub.dart.snapshot, which is 100 thousand lines of unintelligible Dart bytecode. Is there a human readable pub.dart file? Is it in the SDK?
Your help is appreciated.
For now, this is not configurable. The source folder is always /web and the output folder is always /deploy.
The source is available at http://code.google.com/p/dart/source/browse/trunk/dart/sdk/lib/_internal/pub/lib/src/command/deploy.dart#33 .
A simple workaround is just to rename deploy once generated.