Recently I have implemented the highcharts in my application where I got perfect
view as displaying the Google analytics data but sometimes I am getting the below error,
Uncaught Highcharts error #19: www.highcharts.com/errors/19
Is there any one have idea about it?
Thanks in advance,
Highcharts Error #19
Too many ticks
This error happens when you try to apply too many ticks to an axis, specifically when you add more ticks than the axis pixel length. In practice, it doesn't make sense to add ticks so densely that they can't be distinguished from each other. One cause of the error may be that you set a tickInterval that is too small for the data value range. In general, tickPixelInterval is a better option, as it will handle this automatically. Another case is if you try to set categories on a datetime axis, which will result in Highcharts trying to add one tick on every millisecond since 1970.
Related
In Vaadin 14.6.1, I tried to create a Vaadin heatmap foollowing the documentation / example from here.
However, I encountered a few problems/questions, listed in descending order of importance below:
The heatmap supported 30 rows by 30 columns; but when I tried 40 rows by 40 columns, the entire heatmap showed a single color (blue in my case).
Is it possible to manually set the minimum numeric value and maximum numeric value for the color scheme. This way, if I plot my data one day and it has values in the range of 0 to 1, but on another dataset from another day, the numeric values range from between 0 and 0.5, the color scheme range won't automatically change (to being between 0 and 0.5) and confuse the user.
In the documentation, it has the following methods listed, but they do not seem to exist in Vaadin 14.6.1
plotOptions.setBorderColor(SolidColor.WHITE);
plotOptions.setBorderWidth(2);
When I hover over the datapoints, is there a way that the tooltip can only show the numeric value (and not the x, y coordinate or the series name etc.?)
Is there any limit to the number of datapoints? I'm hoping that if #1 above is resolved that I can plot a 100 by 100 (ie 10,000) point heatmap.
If I plot 100by100, there will be many labels on the x and y axis. In my case, the x and y axis are actually numerical, so I did what the documentation suggested and just placed category labels in the xaxis and yaxis spots. However, is there any way to only display every "nth" label, so that the x-axis and y-axis is not so crowded? (This would essentially mimic what Vaadin does for normal line charts' xaxis and yaxis).
I'm not that experienced with Vaadin Chart, but these are the questions that I can comment on:
(1) With 40x40 items you go over the threshold of 1000 in which the Chart switches into "turbo" mode for performance reasons. This seems to not be compatible with the heatmap series. You can disable turbo mode by setting plotOptions.setTurboThreshold(0);
(2) Unfortunately the ColorAxis doesn't support this, it only has an API for min and max color. Definitely a valid use-case though, and it seems to be supported by the Highcharts library that the Vaadin Chart uses under the hood. You should consider opening a feature request for this in the Github repo.
(3) This seems to be a documentation issue. The methods are available in later Vaadin platform versions, but not in 14.6.
(5) In theory not, but in practice there will be a huge performance hit in the browser due to the excessive amount of DOM elements (quick test of 100x100 froze the browser for 10s). I'm afraid the component isn't really made for such extreme use-cases. In this case it might be better to utilize a low-level JS drawing library using the canvas, or draw an image on the server-side and display that in the browser. Maybe you can also consider modifying your use-case so that you only display one slice of your data and allow the user to switch between slices.
The problem is that, if I try to change the lowest point to somewhere higher, the entire chart will be lowered severely.
How do I adjust each point with no above mentioned issue?
P.S. I use Highchart's Highstock.
It would be helpful if you could show a JsFiddle with the actual working code. Without knowing what exactly is going on with your chart it's difficult to figure out what the issue is and how to fix it.
Have a look at the yAxis - Highstock API Reference, you could potentially make use of min or max to counteract the scaling. Again though, without seeing your code it's tough to know.
If I understand your problem, you are trying to set the 7th point from currently at ~150 to something really high, say 5000? I did not notice any real change in the position of other points if the new value was under 1500 (or something around twice the first point)
Appears that your chart is set to comparison mode, hence, I believe, the default max and min are (100% & -100%) by default, this is w.r.t. to first point of the series. Highcharts would auto adjust these extremes if any of the points were to lie outside this range, you could force an override using yAxis.min & max.
For instance, you can set yAxis.min to -100 and yAxis.max to 100 like this
yAxis: {
min:-100,
max:100
}
Play around with the min and max to get to the values that suits your data the most, do remember these are % comparison to the first point. Any points outside these ranges would not show in the chart.
#jsFiddle
We are facing issue in wind rose chart when displaying real data. The data values range from very small (100) to very large (1000000000). On rendering the data set in wind rose chart, as the max length has to be set according to the highest value, the smaller values are not visible.
As a workaround to this, we planned to restrict the length of the bars/ spikes in the chart to say 10px so that all the values are visible. But couldn't find a way to do so. In bar chart we can use minPointLength property.
Can anyone provide any help on how to restrict the length of bars or any other workaround for this?
Thanks in advance.
Use type: 'logarithmic' axis, see: http://jsfiddle.net/3pEbJ/
Thanks a lot. It worked in our case. Would like to add few points for the modifications required for using this property.
1. On using “type: 'logarithmic'” property, if the data series contains value 0 for any value, JavaScript will throw error #10 ‘Can't plot zero or subzero values on a logarithmic axis’. To avoid this error you need to change the zero value to some non-zero value. This scenario occurs for stacked series.
2. Providing non-zero value will render that value in tooltip also. So as a workaround, we can provide the non-zero value like 0.00001. This way it will display value 0 in the tooltip for that series and also the corresponding bar would be very small.
Hello I'm original using highcharts
because my clients has need to see different view based on time,
like 1day,2day,3day,7day,1month, so I figure out highstock is more resemble
to this, but using highstock is missing some feature.
while I successfully figure out how to add legend(legend), change point display
(tooltip:formatter), change xaxis display and navigator display(dateTimeLabelFormats),
I see the display of line just like stock, which means:
it doesn't consider the absolute value of which too much, like I have connected terminals varying from 8-10, registered terminals varying from 2-3, unfornately it will draw registered terminals above connected terminals, which doesn't quite make sense, (besides the yAxis display is not correct, when it draw 5, the point above which actually says 4..), I also tried
plotOptions: {series: {compare: 'percent'}},
and
plotOptions: {series: {compare: 'percent'}},
but doesn't work, the y Axis is still quite confusing,
does anybody has a good solution? Thanks.
Had the same issue recently. It basically come from leaving useless parts of the example code in :D
Taking out the
plotOptions: {series: {compare: 'percent'}},
part should make it use the absolute values.
I assume taking out the compare parameter alone should be enough as well but since its the only thing you set from the plotOptions there is no need to keep the rest.
I am using a Highcharts Stock graph to show a percentage with respect to time.
http://jsfiddle.net/michaelchart/yYmPR/1/
At certain zoom levels (in this case, when zooming to a timespan of between about 6 and 12 years) the plot strangely turns from a line to sporadic points.
Any ideas as to why this might be? Or is it a bug with Highstock?
You can see an example of a working Highstock graph here http://www.highcharts.com/stock/demo/basic-line.
After posting on the Highstock forum and consequently having an issue posted on github, I found that it was because of the default value of the gapSize option. According to the docs;
gapSize : Number
Defines when to display a gap in the graph. A gap size of 5 means that if the distance between two points is greater than five times that of the two closest points, the graph will be broken.
In practice, this option is most often used to visualize gaps in time series. In a stock chart, intraday data is available for daytime hours, while gaps will appear in nights and weekends.
Defaults to 5.
Setting gapSize to null fixes the problem.
In my particular case, the reason of this problem was bad data output.
Within "series" property, within the "data" array there was a "false" value.
Example:
series : {
"type":"column",
"name":"Test",
"data":[541,784,false,251,353]
}
Corrected the problem in the backend so "false" was interpreted as 0, and everything works now.