Using Lumberjack in IOS7 on an ipod5, I Added a DDASLLogger to DDLog, and logged something. And used "asl_search" to get logs, but got nothing. When I did it on ios7 iphone simulator, I got what I exactly logged. Is it a bug of DDASLLogger?
I finally found the answer just now: YES. It's a bug recording to "asl_search only finds messages with ReadUID set". We need to set the ReadUID property for a message when sending it to ASL. Otherwise asl_search cannot find it.
The code of sending message in DDASLLogger is as following:
- (void)logMessage:(DDLogMessage *)logMessage
{
NSString *logMsg = logMessage->logMsg;
if (formatter)
{
logMsg = [formatter formatLogMessage:logMessage];
}
if (logMsg)
{
const char *msg = [logMsg UTF8String];
int aslLogLevel;
switch (logMessage->logFlag)
{
// Note: By default ASL will filter anything above level 5 (Notice).
// So our mappings shouldn't go above that level.
case LOG_FLAG_ERROR : aslLogLevel = ASL_LEVEL_ALERT; break;
case LOG_FLAG_WARN : aslLogLevel = ASL_LEVEL_CRIT; break;
case LOG_FLAG_INFO : aslLogLevel = ASL_LEVEL_ERR; break;
case LOG_FLAG_DEBUG : aslLogLevel = ASL_LEVEL_WARNING; break;
default : aslLogLevel = ASL_LEVEL_NOTICE; break;
}
asl_log(client, NULL, aslLogLevel, "%s", msg);
}
}
We just need to change
asl_log(client, NULL, aslLogLevel, "%s", msg);
to
aslmsg m = asl_new(ASL_TYPE_MSG);
asl_set(m, ASL_KEY_READ_UID, "501");
asl_log(client, m, aslLogLevel, "%s", msg);
It works. Thanks.
Related
Suppose I am in a room which is totally locked and I am begging for the key, so I can go outside. But the person who locked the door behind me is asking to solve a problem for him. The problem is that I have an SD card, SD card module, Arduino UNO, power, a laptop with internet access. What I need to do for the person is that I have to convert an image file stored in the SD card to a base64 string using the Arduino. Now I want to know how to this task for the person, so I can go out freely. Kindly remember the title of this question, otherwise, my life is in danger, and please avoid suggestions only. If you have done this before, then you might answer the question, otherwise please do not. Sorry for being harsh, but it is really bad to have a bad answer. StackOverflow is my last hope.
I have used a library called base64 for Arduino, but I didn't solve my problem. Here is the library. https://github.com/adamvr/arduino-base64
My aim was to convert image to the Base64 string format and then send this string through ESP8266 module to the webserver.
Until now, I didn't find any solution to this problem. I found an alternative to send images taken by a camera. That alternative is a camera module with ESP32-S. This module is "ESP32-S Cam", which takes pictures and sends them to an online webserver.
Here is the code for ESP32 Cam for taking and sending picture to the server where we will have a PHP Scrip given under this code.
#include "esp_http_client.h"
#include "esp_camera.h"
#include <WiFi.h>
#include "Arduino.h"
const char* ssid = "ashiq"; // my wifi "SSID" name
const char* password = "11585858"; // my wifi Password
int capture_interval = 20000; // Microseconds between captures
const char *post_url = "http://app.softwarism.com/esp32/getPhoto.php"; // Location where images are POSTED
bool internet_connected = false;
long current_millis;
long last_capture_millis = 0;
//for indicating that the picture has been taken and then sent
#define GPIO_PIN_WAKEUP GPIO_NUM_12
// CAMERA_MODEL_AI_THINKER
#define PWDN_GPIO_NUM 32
#define RESET_GPIO_NUM -1
#define XCLK_GPIO_NUM 0
#define SIOD_GPIO_NUM 26
#define SIOC_GPIO_NUM 27
#define Y9_GPIO_NUM 35
#define Y8_GPIO_NUM 34
#define Y7_GPIO_NUM 39
#define Y6_GPIO_NUM 36
#define Y5_GPIO_NUM 21
#define Y4_GPIO_NUM 19
#define Y3_GPIO_NUM 18
#define Y2_GPIO_NUM 5
#define VSYNC_GPIO_NUM 25
#define HREF_GPIO_NUM 23
#define PCLK_GPIO_NUM 22
void setup()
{
Serial.begin(115200);
//Setup indication pin Mode
pinMode(GPIO_PIN_WAKEUP,OUTPUT);
if (init_wifi()) { // Connected to WiFi
internet_connected = true;
Serial.println("Internet connected");
}
camera_config_t config;
config.ledc_channel = LEDC_CHANNEL_0;
config.ledc_timer = LEDC_TIMER_0;
config.pin_d0 = Y2_GPIO_NUM;
config.pin_d1 = Y3_GPIO_NUM;
config.pin_d2 = Y4_GPIO_NUM;
config.pin_d3 = Y5_GPIO_NUM;
config.pin_d4 = Y6_GPIO_NUM;
config.pin_d5 = Y7_GPIO_NUM;
config.pin_d6 = Y8_GPIO_NUM;
config.pin_d7 = Y9_GPIO_NUM;
config.pin_xclk = XCLK_GPIO_NUM;
config.pin_pclk = PCLK_GPIO_NUM;
config.pin_vsync = VSYNC_GPIO_NUM;
config.pin_href = HREF_GPIO_NUM;
config.pin_sscb_sda = SIOD_GPIO_NUM;
config.pin_sscb_scl = SIOC_GPIO_NUM;
config.pin_pwdn = PWDN_GPIO_NUM;
config.pin_reset = RESET_GPIO_NUM;
config.xclk_freq_hz = 20000000;
config.pixel_format = PIXFORMAT_JPEG;
//init with high specs to pre-allocate larger buffers
if (psramFound()) {
config.frame_size = FRAMESIZE_UXGA;
config.jpeg_quality = 10;
config.fb_count = 2;
} else {
config.frame_size = FRAMESIZE_SVGA;
config.jpeg_quality = 12;
config.fb_count = 1;
}
// camera init
esp_err_t err = esp_camera_init(&config);
if (err != ESP_OK) {
Serial.printf("Camera init failed with error 0x%x", err);
return;
}
}
bool init_wifi()
{
int connAttempts = 0;
Serial.println("\r\nConnecting to: " + String(ssid));
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED ) {
delay(500);
Serial.print(".");
if (connAttempts > 10) return false;
connAttempts++;
}
return true;
}
esp_err_t _http_event_handler(esp_http_client_event_t *evt)
{
switch (evt->event_id) {
case HTTP_EVENT_ERROR:
Serial.println("HTTP_EVENT_ERROR");
break;
case HTTP_EVENT_ON_CONNECTED:
Serial.println("HTTP_EVENT_ON_CONNECTED");
break;
case HTTP_EVENT_HEADER_SENT:
Serial.println("HTTP_EVENT_HEADER_SENT");
break;
case HTTP_EVENT_ON_HEADER:
Serial.println();
Serial.printf("HTTP_EVENT_ON_HEADER, key=%s, value=%s", evt->header_key, evt->header_value);
break;
case HTTP_EVENT_ON_DATA:
Serial.println();
Serial.printf("HTTP_EVENT_ON_DATA, len=%d", evt->data_len);
if (!esp_http_client_is_chunked_response(evt->client)) {
// Write out data
// printf("%.*s", evt->data_len, (char*)evt->data);
}
break;
case HTTP_EVENT_ON_FINISH:
Serial.println("");
Serial.println("HTTP_EVENT_ON_FINISH");
break;
case HTTP_EVENT_DISCONNECTED:
Serial.println("HTTP_EVENT_DISCONNECTED");
break;
}
return ESP_OK;
}
static esp_err_t take_send_photo()
{
Serial.println("Taking picture...");
camera_fb_t * fb = NULL;
esp_err_t res = ESP_OK;
fb = esp_camera_fb_get();
if (!fb) {
Serial.println("Camera capture failed");
return ESP_FAIL;
}else{
indication();
}
esp_http_client_handle_t http_client;
esp_http_client_config_t config_client = {0};
config_client.url = post_url;
config_client.event_handler = _http_event_handler;
config_client.method = HTTP_METHOD_POST;
http_client = esp_http_client_init(&config_client);
esp_http_client_set_post_field(http_client, (const char *)fb->buf, fb->len);
esp_http_client_set_header(http_client, "Content-Type", "image/jpg");
esp_err_t err = esp_http_client_perform(http_client);
if (err == ESP_OK) {
Serial.print("esp_http_client_get_status_code: ");
Serial.println(esp_http_client_get_status_code(http_client));
}
esp_http_client_cleanup(http_client);
esp_camera_fb_return(fb);
}
void loop()
{
// TODO check Wifi and reconnect if needed
current_millis = millis();
if (current_millis - last_capture_millis > capture_interval) { // Take another picture
last_capture_millis = millis();
take_send_photo();
//indicate that the picture has been taken and sent
indication();
}
}
void indication(){
digitalWrite(GPIO_PIN_WAKEUP,HIGH);
delay(1000);
digitalWrite(GPIO_PIN_WAKEUP,LOW);
}
Here is the PHP Script waiting to get the picture sent by the camera.
<?php
require_once("con.php");
$received = file_get_contents('php://input');
$fileToWrite = "uploads/smart_tick_".time().".jpg";
if(file_put_contents($fileToWrite, $received)){
echo "Uploaded";
}
?>
Note: Do not forget to create a folder "uploads" in the same directory where the PHP Script is.
I tried opening a url in my program but I keep getting errors from "shellapi.h", how can I fix it?
ShellExecuteA(NULL, NULL , "chrome.exe", this->photo.c_str(), NULL, SW_SHOWMAXIMIZED);
There are a number of c++ library available for this, and here you can find something.
I have used the following:
The Silicon C++ Web Framework -siliconframework.org
IXWebSocket - https://github.com/machinezone/IXWebSocket
Probably better to just use the default browser, like this:
// assumes photo.c_str() is valid URL ...
ShellExecuteA(0, NULL, photo.c_str(), NULL, NULL, SW_SHOWDEFAULT);
For a cross-platform solution, you can set this header:
#ifdef _WIN32
static int platform = 1;
#elif _WIN64
static int platform= 1;
#elif __linux__
static int platform = 2;
#elif __APPLE__
static int platform = 3;
#else
static int platform = 0;
#endif
and then create a method to open the URL, with the code below:
std::string str;
switch(platform) {
case 1:
str = "explorer";
break;
case 2:
str = "xdg-open";
break;
case 3:
str = "open";
break;
default:
std::cout << "Should never happen on the 3 defined platforms" << std::endl;
}
str.append(" " + url);
std::system(str.data());
Remember to provide a URL string, in this case a const std::string& url.
I am new to MPLAB X Harmony framework and also in working with microcontrollers. I am working on PIC32MZ2048ECH144. I wanted to transmit a simple string using USART and see it displayed in RealTerm terminal.(I have tried HyperTerminal also.) Whatever string I send, I see only junk characters being displayed. When I browsed for the solution for this problem of junk characters being displayed, there were suggestions to check for the baud rate. I have set the baud rate to be 9600 in MPLab Harmony Configurator(Options -> Harmony Framework configuration -> Drivers -> USART -> USART Driver Instance 0 -> Baud Rate -> 9600). So I used the following line in app.c to explicitly set the baud rate.(PBCLK is 100MHz). But no luck!
PLIB_USART_BaudRateSet(USART_ID_2, 100000000 ,9600);
The code for app.c file:
/*******************************************************************************
Start of File
*/
const char *string1 = "*** UART Interrupt-driven Application Example ***\r\n";
const char *string2 = "*** Type some characters and observe the LED turn ON ***\r\n";
APP_DATA appData =
{
};
APP_DRV_OBJECTS appDrvObject;
void APP_Initialize ( void )
{
appData.state = USART_ENABLE;
appData.InterruptFlag = false;
}
bool WriteString(void)
{
if(*appData.stringPointer == '\0')
{
return true;
}
while (PLIB_USART_TransmitterIsEmpty(USART_ID_1))
{
PLIB_USART_TransmitterByteSend(USART_ID_1, *appData.stringPointer);
appData.stringPointer++;
if(*appData.stringPointer == '\0')
{
return true;
}
}
return false;
}
bool PutCharacter(const char character)
{
if(PLIB_USART_TransmitterIsEmpty(USART_ID_1))
{
PLIB_USART_TransmitterByteSend(USART_ID_1, character);
return true;
}
else
return false;
}
void APP_Tasks ( void )
{
/* check the application state*/
switch ( appData.state )
{
case USART_ENABLE:
/* Enable the UART module*/
PLIB_USART_BaudRateSet(USART_ID_1, 100000000 ,9600);
PLIB_USART_Enable(USART_ID_1);
appData.stringPointer = string1;
appData.state = USART_TRANSMIT_FIRST_STRING;
break;
case USART_TRANSMIT_FIRST_STRING:
if(true == WriteString())
{
appData.state = USART_TRANSMIT_SECOND_STRING;
appData.stringPointer = string2;
}
break;
case USART_TRANSMIT_SECOND_STRING:
if(true == WriteString())
{
appData.state = USART_RECEIVE_DONE;
}
break;
case USART_RECEIVE_DONE:
if (appData.InterruptFlag)
{
if(true == PutCharacter(appData.data))
{
appData.InterruptFlag = false;
}
}
break;
default:
while (1);
}
}
/*******************************************************************************
End of File
*/
I am sorry that I cannot attach the image of the output I receive in RealTerm as I do not have enough points.
I have no clue where else the problem could be that gives the mismatch of baud rate. Any hints or help would be of great help. Thanks in advance.
Kindly apologize me for any mistakes in the post.
you are correct that it is most likely BAUD rate, but just to be sure how is the USART hooked to the computer? Do you have a translator chip since the computer is expecting +-5V? As for the BAUD, check your clocking scheme and know that PBCLK is sometimes DIV_2 of the SYSCLOCK. There is a great clocking schematic in the Harmony framework to double check your clocking and CONFIG pragmas.
How to send the SMS using blackberry application?
you should check sms RIM API for that
http://myhowto.org/java/j2me/22-sending-and-receiving-gsm-sms-on-blackberry-using-rim-apis/
Detect the phone's network programmatically to send sms
public int getNetworkType() {
int type = 0;
int networkType = RadioInfo.getNetworkType();
switch (networkType) {
case RadioInfo.NETWORK_GPRS: // GSM
type = 0;
break;
case RadioInfo.NETWORK_CDMA: //CDMA
type = 1;
break;
case RadioInfo.NETWORK_IDEN: //GSM
type = 0;
break;
default:
type = 0; //GSM
break;
}
return type;
}
This question already has answers here:
How can I programmatically get the MAC address of an iphone
(12 answers)
Closed 9 years ago.
I have an application that uses rest to communicate to a server, i would like to obtain the iphones either mac address or device ID for uniqueness validation, how can this be done?
[[UIDevice currentDevice] uniqueIdentifier] is guaranteed to be unique to each device.
uniqueIdentifier (Deprecated in iOS 5.0. Instead, create a unique identifier specific to your app.)
The docs recommend use of CFUUIDCreate instead of [[UIDevice currentDevice] uniqueIdentifier]
So here is how you generate an unique id in your app
CFUUIDRef uuidRef = CFUUIDCreate(kCFAllocatorDefault);
NSString *uuidString = (NSString *)CFUUIDCreateString(NULL,uuidRef);
CFRelease(uuidRef);
Note that you have to save the uuidString in user defaults or in other place because you can not generate the same uuidString again.
You can use UIPasteboard to store your generated uuid. And if the app will be deleted and reinstalled you can read from UIPasteboard the old uuid. The paste board will be wiped out when the device will be erased.
In iOS 6 they have introduced the NSUUID Class that is designed to create UUIDs strings
Also they added in iOS 6 #property(nonatomic, readonly, retain) NSUUID *identifierForVendor to the UIDevice class
The value of this property is the same for apps that come from the
same vendor running on the same device. A different value is returned
for apps on the same device that come from different vendors, and for
apps on different devices regardless of vendor.
The value of this property may be nil if the app is running in the
background, before the user has unlocked the device the first time
after the device has been restarted. If the value is nil, wait and get
the value again later.
Also in iOS 6 you can use ASIdentifierManager class from AdSupport.framework. There you have
#property(nonatomic, readonly) NSUUID *advertisingIdentifier
Discussion Unlike the identifierForVendor property of the UIDevice,
the same value is returned to all vendors. This identifier may
change—for example, if the user erases the device—so you should not
cache it.
The value of this property may be nil if the app is running in the
background, before the user has unlocked the device the first time
after the device has been restarted. If the value is nil, wait and get
the value again later.
Edit:
Pay attention that the advertisingIdentifier may return
00000000-0000-0000-0000-000000000000
because there seems to be a bug in iOS. Related question: The advertisingIdentifier and identifierForVendor return "00000000-0000-0000-0000-000000000000"
For a Mac Adress you could use
#import <Foundation/Foundation.h>
#interface MacAddressHelper : NSObject
+ (NSString *)getMacAddress;
#end
implentation
#import "MacAddressHelper.h"
#import <sys/socket.h>
#import <sys/sysctl.h>
#import <net/if.h>
#import <net/if_dl.h>
#implementation MacAddressHelper
+ (NSString *)getMacAddress
{
int mgmtInfoBase[6];
char *msgBuffer = NULL;
size_t length;
unsigned char macAddress[6];
struct if_msghdr *interfaceMsgStruct;
struct sockaddr_dl *socketStruct;
NSString *errorFlag = NULL;
// Setup the management Information Base (mib)
mgmtInfoBase[0] = CTL_NET; // Request network subsystem
mgmtInfoBase[1] = AF_ROUTE; // Routing table info
mgmtInfoBase[2] = 0;
mgmtInfoBase[3] = AF_LINK; // Request link layer information
mgmtInfoBase[4] = NET_RT_IFLIST; // Request all configured interfaces
// With all configured interfaces requested, get handle index
if ((mgmtInfoBase[5] = if_nametoindex("en0")) == 0)
errorFlag = #"if_nametoindex failure";
else
{
// Get the size of the data available (store in len)
if (sysctl(mgmtInfoBase, 6, NULL, &length, NULL, 0) < 0)
errorFlag = #"sysctl mgmtInfoBase failure";
else
{
// Alloc memory based on above call
if ((msgBuffer = malloc(length)) == NULL)
errorFlag = #"buffer allocation failure";
else
{
// Get system information, store in buffer
if (sysctl(mgmtInfoBase, 6, msgBuffer, &length, NULL, 0) < 0)
errorFlag = #"sysctl msgBuffer failure";
}
}
}
// Befor going any further...
if (errorFlag != NULL)
{
NSLog(#"Error: %#", errorFlag);
return errorFlag;
}
// Map msgbuffer to interface message structure
interfaceMsgStruct = (struct if_msghdr *) msgBuffer;
// Map to link-level socket structure
socketStruct = (struct sockaddr_dl *) (interfaceMsgStruct + 1);
// Copy link layer address data in socket structure to an array
memcpy(&macAddress, socketStruct->sdl_data + socketStruct->sdl_nlen, 6);
// Read from char array into a string object, into traditional Mac address format
NSString *macAddressString = [NSString stringWithFormat:#"%02X:%02X:%02X:%02X:%02X:%02X",
macAddress[0], macAddress[1], macAddress[2],
macAddress[3], macAddress[4], macAddress[5]];
//NSLog(#"Mac Address: %#", macAddressString);
// Release the buffer memory
free(msgBuffer);
return macAddressString;
}
#end
Use:
NSLog(#"MAC address: %#",[MacAddressHelper getMacAddress]);
Use this:
NSUUID *id = [[UIDevice currentDevice] identifierForVendor];
NSLog(#"ID: %#", id);
In IOS 5 [[UIDevice currentDevice] uniqueIdentifier] is deprecated.
It's better to use -identifierForVendor or -identifierForAdvertising.
A lot of useful information can be found here:
iOS6 UDID - What advantages does identifierForVendor have over identifierForAdvertising?
Here, We can find mac address for IOS device using Asp.net C# Code...
.aspx.cs
-
var UserDeviceInfo = HttpContext.Current.Request.UserAgent.ToLower(); // User's Iphone/Ipad Info.
var UserMacAdd = HttpContext.Current.Request.UserHostAddress; // User's Iphone/Ipad Mac Address
GetMacAddressfromIP macadd = new GetMacAddressfromIP();
if (UserDeviceInfo.Contains("iphone;"))
{
// iPhone
Label1.Text = UserDeviceInfo;
Label2.Text = UserMacAdd;
string Getmac = macadd.GetMacAddress(UserMacAdd);
Label3.Text = Getmac;
}
else if (UserDeviceInfo.Contains("ipad;"))
{
// iPad
Label1.Text = UserDeviceInfo;
Label2.Text = UserMacAdd;
string Getmac = macadd.GetMacAddress(UserMacAdd);
Label3.Text = Getmac;
}
else
{
Label1.Text = UserDeviceInfo;
Label2.Text = UserMacAdd;
string Getmac = macadd.GetMacAddress(UserMacAdd);
Label3.Text = Getmac;
}
.class File
public string GetMacAddress(string ipAddress)
{
string macAddress = string.Empty;
if (!IsHostAccessible(ipAddress)) return null;
try
{
ProcessStartInfo processStartInfo = new ProcessStartInfo();
Process process = new Process();
processStartInfo.FileName = "arp";
processStartInfo.RedirectStandardInput = false;
processStartInfo.RedirectStandardOutput = true;
processStartInfo.Arguments = "-a " + ipAddress;
processStartInfo.UseShellExecute = false;
process = Process.Start(processStartInfo);
int Counter = -1;
while (Counter <= -1)
{
Counter = macAddress.Trim().ToLower().IndexOf("mac address", 0);
if (Counter > -1)
{
break;
}
macAddress = process.StandardOutput.ReadLine();
if (macAddress != "")
{
string[] mac = macAddress.Split(' ');
if (Array.IndexOf(mac, ipAddress) > -1)
{
if (mac[11] != "")
{
macAddress = mac[11].ToString();
break;
}
}
}
}
process.WaitForExit();
macAddress = macAddress.Trim();
}
catch (Exception e)
{
Console.WriteLine("Failed because:" + e.ToString());
}
return macAddress;
}