Related
I am trying to do the Michael Hartl tutorial. When I attempt to install rails 3.2.14 in my gemset, I get the following issue:
$ gem install rails -v 3.2.14
ERROR: Could not find a valid gem 'rails' (= 3.2.14), here is why:
Unable to download data from https://rubygems.org/ - SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B: certificate verify failed (https://s3.amazonaws.com/production.s3.rubygems.org/specs.4.8.gz)
After Googling around, I found that I could use a non-SSL source for rubygems so I ran:
sudo gem sources -a http://rubygems.org
Then, when I tried to install rails again, it was successful. However, I still got the issue above but as a warning:
WARNING: Unable to pull data from 'https://rubygems.org/': SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B: certificate verify failed (https://s3.amazonaws.com/production.s3.rubygems.org/specs.4.8.gz)
How can I remove this warning/error entirely?
I am using the following:
rvm 1.22.15
ruby 2.0.0p247 (2013-06-27 revision 41674) [x86_64-darwin12.3.0]
OSX 10.8.5
For RVM & OSX users
Make sure you use latest rvm:
rvm get stable
Then you can do two things:
Update certificates:
rvm osx-ssl-certs update all
Update rubygems:
rvm rubygems latest
For non RVM users
Find path for certificate:
cert_file=$(ruby -ropenssl -e 'puts OpenSSL::X509::DEFAULT_CERT_FILE')
Generate certificate:
security find-certificate -a -p /Library/Keychains/System.keychain > "$cert_file"
security find-certificate -a -p /System/Library/Keychains/SystemRootCertificates.keychain >> "$cert_file"
The whole code: https://github.com/wayneeseguin/rvm/blob/master/scripts/functions/osx-ssl-certs
For non OSX users
Make sure to update package ca-certificates. (on old systems it might not be available - do not use an old system which does not receive security updates any more)
Windows note
The Ruby Installer builds for windows are prepared by Luis Lavena and the path to certificates will be showing something like C:/Users/Luis/... check https://github.com/oneclick/rubyinstaller/issues/249 for more details and this answer https://stackoverflow.com/a/27298259/497756 for fix.
Latest findings...
https://gist.github.com/luislavena/f064211759ee0f806c88
Most importantly...download
https://raw.githubusercontent.com/rubygems/rubygems/master/lib/rubygems/ssl_certs/rubygems.org/AddTrustExternalCARoot-2048.pem
Figure out where to stick it
C:\>gem which rubygems
C:/Ruby21/lib/ruby/2.1.0/rubygems.rb
Then just copy the .pem file in ../2.1.0/rubygems/ssl_certs/ and go on about your business.
For windows users
Goto link http://rubygems.org/pages/download
Download the latest zip file (In my case 2.4.5)
Unzip it
run "ruby setup.rb" in unzipped folder
now run gem install command
If you want to use the non-SSL source, try removing the HTTPS source first, and then adding the HTTP one:
sudo gem sources -r https://rubygems.org
sudo gem sources -a http://rubygems.org
UPDATE:
As mpapis states, this should be used only as a temporary workaround. There could be some security concerns if you're accessing RubyGems through the non-SSL source.
Once the workaround is not needed anymore, you should restore the SSL-source:
sudo gem sources -r http://rubygems.org
sudo gem sources -a https://rubygems.org
On Windows you'll have to use HTTP source to update gem then change back to using HTTPS.
gem sources -r https://rubygems.org/
gem sources -a http://rubygems.org/
gem update --system
gem sources -r http://rubygems.org/
gem sources -a https://rubygems.org/
Edit: Warning I'm not sure if this is safe. Does anyone know if ruby packages are signed? The accepted answer looks like a better solution.
For Windows Users (and maybe others)
Rubygems.org has a guide that not only explains how to fix this problem, but also why so many people are having it: SSL Certificate Update
The reason for the problem is rubygems.org switched to a more secure SSL certificate (SHA-2 which use 256bit encryption). The rubygems command line tool bundles the reference to the correct certificate. Therefore rubygems itself can’t be updated using an older version of rubygems. Rubygems must first be updated manually.
First find out what rubygems you have:
rubygems –v
Depending on whether you have a 1.8.x, 2.0.x or 2.2.x, you will need to download an update gem, named “rubygems-update-X.Y.Z.gem”, where X.Y.Z is the version you need.
Running 1.8.x: download: https://github.com/rubygems/rubygems/releases/tag/v1.8.30
Running 2.0.x: download: https://github.com/rubygems/rubygems/releases/tag/v2.0.15
Running 2.2.x: download: https://github.com/rubygems/rubygems/releases/tag/v2.2.3
Install update gem:
gem install –-local full_path_to_the_gem_file
Run update gem:
update_rubygems --no-ri --no-rdoc
Check that rubygems was updated:
rubygems –v
Uninstall update gem:
gem uninstall rubygems-update -x
At this point, you may be OK. But it is possible that you do not have the latest public key file for the new certificate. To do this:
Download the latest certificate, (currently AddTrustExternalCARoot-2048.pem)
from https://rubygems.org/pages/download.
All of the certs are also located at: https://github.com/rubygems/rubygems/tree/master/lib/rubygems/ssl_certs
Find out where to put it:
gem which rubygems
Put this file in the “rubygems\ssl_certs” directory at this location.
As per rubygems commit, the certificates are moved to more specific directories. Thus, currently the certificate(AddTrustExternalCARoot-2048.pem) is expected to be on the following path lib/rubygems/ssl_certs/rubygems.org/AddTrustExternalCARoot-2048.pem
Try to use the source website for the gems, i.e rubygems.org. Use http instead of https. This method does not involve any work such as installing certs and all that.
Example -
gem install typhoeus --source http://rubygems.org
This works, but there is one caveat though.
The gem is installed, but the documentation is not because of cert errors. Here is the error I get
Parsing documentation for typhoeus-0.7.0 WARNING: Unable to pull
data from 'https://rubygems.org/': SSL_connect returned=1 errno=0
state=SSLv3 read server certificate B: certificate verify failed
(https://rubygems.org/latest_specs.4.8.gz)
Running gem update --system worked for me
Make sure your system clock is correct
This exact error happened to me today on an Ubuntu virtual machine running on VirtualBox. I tried most of the solutions shown above before I noticed that I had resumed from a very old suspended state, and my clock was off by many days.
Updating the clock immediately fixed my issue. Here's the command I used in my case:
sudo service ntp stop && sudo ntpdate pool.ntp.org && sudo service ntp start
Simply uninstalling and reinstalling openssl with homebrew solved this issue for me.
brew uninstall --force openssl
brew install openssl
For Fedora users
Update the cert.pem to newest file that provide by cURL: http://curl.haxx.se/ca/cacert.pem
curl -o `ruby -ropenssl -e 'p OpenSSL::X509::DEFAULT_CERT_FILE' |tr -d \"` http://curl.haxx.se/ca/cacert.pem
If you are using windows, open https://rubygems.org/ with internet explorer.
Click on security information and import the certificate. The bottom line is your certification chain is outdated and you need to add this new certificate. Remember that this is not a security violation as long as you can validate the certificate as trusted.
Approach/one-liner that can be automated to download gems using HTTP instead of HTTPS:
printf -- '---\n:sources:\n- http://rubygems.org\n' | tee ~/.gemrc
In my case, the Ubuntu CA certificates were out of date. I fixed it by running:
sudo update-ca-certificates
Download the cacert.pem file from http://curl.haxx.se/ca/cacert.pem. Save this file to C:\RailsInstaller\cacert.pem.
Now make ruby aware of your certificate authority bundle by setting SSL_CERT_FILE. To set this in your current command prompt session, type:
set SSL_CERT_FILE=C:\RailsInstaller\cacert.pem
The particular case of RubyGems (the command line tool) is that it requires to bundle inside of its code the trust certificates, which allow RubyGems to establish a connection with the servers even when base operating system is unable to verify the identity of them.
Up until a few months ago, this certificate was provided by one CA, but newer certificate is provided by a different one.
Because of this, existing installations of RubyGems would have to been updated before the switch of the certificate and give enough time for the change to spread (and people to update)
Anyone can find his solution by following the simple steps given in the link below
https://gist.github.com/luislavena/f064211759ee0f806c88
Try
gem update --system
Hope it solves the problem.
For Windows, I followed https://gist.github.com/fnichol/867550.
I had to manually download the "cacert.pem" file. (go to https://curl.se/docs/caextract.html.)
Put it in any folder it won't be deleted from or with.
Make sure you add it to your systems Environment variables!!!
I did this (in Windows 10) via the control panel (select User Accounts) where there is an option to "Change my environment variables". Create a new variable and set the value as the path and filename!
var name SSL_CERT_FILE
var value C:\{your_dir}\cacert.pem
This will ensure it remains visible/useable every time you need it (i.e., every command window you open)!
I had same problem while trying to install cucumber gem. However I noticed that bundler gem already installed with ruby 2.0.
I created a Gemfile.rb in the project folder with required gems and followed this steps
Navigate to project folder
Type bundle install
All the required gems installed.
For Illumos / Solaris using OpenCSW pkgutil:
Install CSWcacertificates prior to 'gem install'
pkgutil -yi CSWcacertificates
If you're using a ruby kit that's not from OpenCSW, your ruby version may expect to find the certificate file in another place. In this case, I simply symlinked OpenCSW's /etc/opt/csw/ssl/cert.pem to the expected place.
Check where ruby expects to find it :
export cf=`ruby -ropenssl -e 'puts OpenSSL::X509::DEFAULT_CERT_FILE'` && echo $cf
Then, if there's a discrepancy, link it:
ln -s /etc/opt/csw/ssl/cert.pem $cf && file $cf
Or may be prevented by firewall like me. Try this:
sudo gem install --http-proxy http://localhost:port cocoapods -V
For Windows user:
After installing Ruby 2.2.3 (+ rubygems 2.5.1) successfully on a test machine with access to the internet, I had this SSL error when I installed bundler on a production machine, within the network.
As I had network access limitations, and there was no way to change the settings for SSL access, and based on the error messages, I performed the steps below to be able to finish the installation of the bundler
(this may sound crazy, but it worked...).
Through a machine with unrestricted access to the internet, downloaded the following files:
spec.4.8.gz (http://rubygems.global.ssl.fastly.net/spec.4.8.gz)
latest_specs.4.8.gz (http://rubygems.global.ssl.fastly.net/latest_specs.4.8.gz)
bundler-1.11.2.gemspec.rz (http://rubygems.global.ssl.fastly.net/quick/Marshal.4.8/bundler-1.11.2.gemspec.rz)
bundler-1.11.2.gem (http://rubygems.global.ssl.fastly.net/gems/bundler-1.11.2.gem)
I added these files on an intranet server, keeping the folder structure of the links above:
$INTRANET_HOME
spec.4.8.gz e latest_specs.4.8.gz
$INTRANET_HOME\quick\Marshal.4.8
bundler-1.11.2.gemspec.rz
$INTRANET_HOME\gems
bundler-1.11.2.gem
Then I added my intranet to access gem source:
gem sources -a http://mydomain.com.br
I have run with the success the "gem install bundler" after installation, all it took was remove my intranet of the gem:
gem sources -r http://mydomain.com.br
I hope that is useful in any similar situation....
As a Windows 10 user, I followed Dheerendra's answer, and it worked for me one day. The next day, I experienced the issue again, and his fix didn't work. For me, the fix was to update bundler with:
gem update bundler
I believe my version of bundler was more than a few months old.
Make sure of that you have installed ruby with --disable-binary option,
if not, uninstall it and reinstall it with the option.
more info here
The answer is no longer valid. Since I have encountered the issue with older Windows ruby right now. I'll post the answer:
When I wanted to install an activesupport gem:
gem in activesupport --version 5.1.6
ERROR: Could not find a valid gem 'activesupport' (= 5.1.6), here is why:
Unable to download data from https://rubygems.org/ - SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B
: certificate verify failed (https://api.rubygems.org/specs.4.8.gz)
The following steps need to copy only the certificates from newer windows ruby.
Take the latest ruby (or at least ruby 2.4.0) and do the following:
copy certificates from these directories (adjust to your needs):
C:\prg_sdk\rubies\Ruby-2.4\lib\ruby\2.4.0\rubygems\ssl_certs\rubygems.org
C:\prg_sdk\rubies\Ruby-2.4\lib\ruby\2.4.0\rubygems\ssl_certs\index.rubygems.org
to destination (again adjust to what you need):
C:\prg_sdk\rubies\Ruby231-p112-x64\lib\ruby\2.3.0\rubygems\ssl_certs
go to rubygems and download the latest version works for me. I'm using windows.
I am trying to do the Michael Hartl tutorial. When I attempt to install rails 3.2.14 in my gemset, I get the following issue:
$ gem install rails -v 3.2.14
ERROR: Could not find a valid gem 'rails' (= 3.2.14), here is why:
Unable to download data from https://rubygems.org/ - SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B: certificate verify failed (https://s3.amazonaws.com/production.s3.rubygems.org/specs.4.8.gz)
After Googling around, I found that I could use a non-SSL source for rubygems so I ran:
sudo gem sources -a http://rubygems.org
Then, when I tried to install rails again, it was successful. However, I still got the issue above but as a warning:
WARNING: Unable to pull data from 'https://rubygems.org/': SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B: certificate verify failed (https://s3.amazonaws.com/production.s3.rubygems.org/specs.4.8.gz)
How can I remove this warning/error entirely?
I am using the following:
rvm 1.22.15
ruby 2.0.0p247 (2013-06-27 revision 41674) [x86_64-darwin12.3.0]
OSX 10.8.5
For RVM & OSX users
Make sure you use latest rvm:
rvm get stable
Then you can do two things:
Update certificates:
rvm osx-ssl-certs update all
Update rubygems:
rvm rubygems latest
For non RVM users
Find path for certificate:
cert_file=$(ruby -ropenssl -e 'puts OpenSSL::X509::DEFAULT_CERT_FILE')
Generate certificate:
security find-certificate -a -p /Library/Keychains/System.keychain > "$cert_file"
security find-certificate -a -p /System/Library/Keychains/SystemRootCertificates.keychain >> "$cert_file"
The whole code: https://github.com/wayneeseguin/rvm/blob/master/scripts/functions/osx-ssl-certs
For non OSX users
Make sure to update package ca-certificates. (on old systems it might not be available - do not use an old system which does not receive security updates any more)
Windows note
The Ruby Installer builds for windows are prepared by Luis Lavena and the path to certificates will be showing something like C:/Users/Luis/... check https://github.com/oneclick/rubyinstaller/issues/249 for more details and this answer https://stackoverflow.com/a/27298259/497756 for fix.
Latest findings...
https://gist.github.com/luislavena/f064211759ee0f806c88
Most importantly...download
https://raw.githubusercontent.com/rubygems/rubygems/master/lib/rubygems/ssl_certs/rubygems.org/AddTrustExternalCARoot-2048.pem
Figure out where to stick it
C:\>gem which rubygems
C:/Ruby21/lib/ruby/2.1.0/rubygems.rb
Then just copy the .pem file in ../2.1.0/rubygems/ssl_certs/ and go on about your business.
For windows users
Goto link http://rubygems.org/pages/download
Download the latest zip file (In my case 2.4.5)
Unzip it
run "ruby setup.rb" in unzipped folder
now run gem install command
If you want to use the non-SSL source, try removing the HTTPS source first, and then adding the HTTP one:
sudo gem sources -r https://rubygems.org
sudo gem sources -a http://rubygems.org
UPDATE:
As mpapis states, this should be used only as a temporary workaround. There could be some security concerns if you're accessing RubyGems through the non-SSL source.
Once the workaround is not needed anymore, you should restore the SSL-source:
sudo gem sources -r http://rubygems.org
sudo gem sources -a https://rubygems.org
On Windows you'll have to use HTTP source to update gem then change back to using HTTPS.
gem sources -r https://rubygems.org/
gem sources -a http://rubygems.org/
gem update --system
gem sources -r http://rubygems.org/
gem sources -a https://rubygems.org/
Edit: Warning I'm not sure if this is safe. Does anyone know if ruby packages are signed? The accepted answer looks like a better solution.
For Windows Users (and maybe others)
Rubygems.org has a guide that not only explains how to fix this problem, but also why so many people are having it: SSL Certificate Update
The reason for the problem is rubygems.org switched to a more secure SSL certificate (SHA-2 which use 256bit encryption). The rubygems command line tool bundles the reference to the correct certificate. Therefore rubygems itself can’t be updated using an older version of rubygems. Rubygems must first be updated manually.
First find out what rubygems you have:
rubygems –v
Depending on whether you have a 1.8.x, 2.0.x or 2.2.x, you will need to download an update gem, named “rubygems-update-X.Y.Z.gem”, where X.Y.Z is the version you need.
Running 1.8.x: download: https://github.com/rubygems/rubygems/releases/tag/v1.8.30
Running 2.0.x: download: https://github.com/rubygems/rubygems/releases/tag/v2.0.15
Running 2.2.x: download: https://github.com/rubygems/rubygems/releases/tag/v2.2.3
Install update gem:
gem install –-local full_path_to_the_gem_file
Run update gem:
update_rubygems --no-ri --no-rdoc
Check that rubygems was updated:
rubygems –v
Uninstall update gem:
gem uninstall rubygems-update -x
At this point, you may be OK. But it is possible that you do not have the latest public key file for the new certificate. To do this:
Download the latest certificate, (currently AddTrustExternalCARoot-2048.pem)
from https://rubygems.org/pages/download.
All of the certs are also located at: https://github.com/rubygems/rubygems/tree/master/lib/rubygems/ssl_certs
Find out where to put it:
gem which rubygems
Put this file in the “rubygems\ssl_certs” directory at this location.
As per rubygems commit, the certificates are moved to more specific directories. Thus, currently the certificate(AddTrustExternalCARoot-2048.pem) is expected to be on the following path lib/rubygems/ssl_certs/rubygems.org/AddTrustExternalCARoot-2048.pem
Try to use the source website for the gems, i.e rubygems.org. Use http instead of https. This method does not involve any work such as installing certs and all that.
Example -
gem install typhoeus --source http://rubygems.org
This works, but there is one caveat though.
The gem is installed, but the documentation is not because of cert errors. Here is the error I get
Parsing documentation for typhoeus-0.7.0 WARNING: Unable to pull
data from 'https://rubygems.org/': SSL_connect returned=1 errno=0
state=SSLv3 read server certificate B: certificate verify failed
(https://rubygems.org/latest_specs.4.8.gz)
Running gem update --system worked for me
Make sure your system clock is correct
This exact error happened to me today on an Ubuntu virtual machine running on VirtualBox. I tried most of the solutions shown above before I noticed that I had resumed from a very old suspended state, and my clock was off by many days.
Updating the clock immediately fixed my issue. Here's the command I used in my case:
sudo service ntp stop && sudo ntpdate pool.ntp.org && sudo service ntp start
Simply uninstalling and reinstalling openssl with homebrew solved this issue for me.
brew uninstall --force openssl
brew install openssl
For Fedora users
Update the cert.pem to newest file that provide by cURL: http://curl.haxx.se/ca/cacert.pem
curl -o `ruby -ropenssl -e 'p OpenSSL::X509::DEFAULT_CERT_FILE' |tr -d \"` http://curl.haxx.se/ca/cacert.pem
If you are using windows, open https://rubygems.org/ with internet explorer.
Click on security information and import the certificate. The bottom line is your certification chain is outdated and you need to add this new certificate. Remember that this is not a security violation as long as you can validate the certificate as trusted.
Approach/one-liner that can be automated to download gems using HTTP instead of HTTPS:
printf -- '---\n:sources:\n- http://rubygems.org\n' | tee ~/.gemrc
In my case, the Ubuntu CA certificates were out of date. I fixed it by running:
sudo update-ca-certificates
Download the cacert.pem file from http://curl.haxx.se/ca/cacert.pem. Save this file to C:\RailsInstaller\cacert.pem.
Now make ruby aware of your certificate authority bundle by setting SSL_CERT_FILE. To set this in your current command prompt session, type:
set SSL_CERT_FILE=C:\RailsInstaller\cacert.pem
The particular case of RubyGems (the command line tool) is that it requires to bundle inside of its code the trust certificates, which allow RubyGems to establish a connection with the servers even when base operating system is unable to verify the identity of them.
Up until a few months ago, this certificate was provided by one CA, but newer certificate is provided by a different one.
Because of this, existing installations of RubyGems would have to been updated before the switch of the certificate and give enough time for the change to spread (and people to update)
Anyone can find his solution by following the simple steps given in the link below
https://gist.github.com/luislavena/f064211759ee0f806c88
Try
gem update --system
Hope it solves the problem.
For Windows, I followed https://gist.github.com/fnichol/867550.
I had to manually download the "cacert.pem" file. (go to https://curl.se/docs/caextract.html.)
Put it in any folder it won't be deleted from or with.
Make sure you add it to your systems Environment variables!!!
I did this (in Windows 10) via the control panel (select User Accounts) where there is an option to "Change my environment variables". Create a new variable and set the value as the path and filename!
var name SSL_CERT_FILE
var value C:\{your_dir}\cacert.pem
This will ensure it remains visible/useable every time you need it (i.e., every command window you open)!
I had same problem while trying to install cucumber gem. However I noticed that bundler gem already installed with ruby 2.0.
I created a Gemfile.rb in the project folder with required gems and followed this steps
Navigate to project folder
Type bundle install
All the required gems installed.
For Illumos / Solaris using OpenCSW pkgutil:
Install CSWcacertificates prior to 'gem install'
pkgutil -yi CSWcacertificates
If you're using a ruby kit that's not from OpenCSW, your ruby version may expect to find the certificate file in another place. In this case, I simply symlinked OpenCSW's /etc/opt/csw/ssl/cert.pem to the expected place.
Check where ruby expects to find it :
export cf=`ruby -ropenssl -e 'puts OpenSSL::X509::DEFAULT_CERT_FILE'` && echo $cf
Then, if there's a discrepancy, link it:
ln -s /etc/opt/csw/ssl/cert.pem $cf && file $cf
Or may be prevented by firewall like me. Try this:
sudo gem install --http-proxy http://localhost:port cocoapods -V
For Windows user:
After installing Ruby 2.2.3 (+ rubygems 2.5.1) successfully on a test machine with access to the internet, I had this SSL error when I installed bundler on a production machine, within the network.
As I had network access limitations, and there was no way to change the settings for SSL access, and based on the error messages, I performed the steps below to be able to finish the installation of the bundler
(this may sound crazy, but it worked...).
Through a machine with unrestricted access to the internet, downloaded the following files:
spec.4.8.gz (http://rubygems.global.ssl.fastly.net/spec.4.8.gz)
latest_specs.4.8.gz (http://rubygems.global.ssl.fastly.net/latest_specs.4.8.gz)
bundler-1.11.2.gemspec.rz (http://rubygems.global.ssl.fastly.net/quick/Marshal.4.8/bundler-1.11.2.gemspec.rz)
bundler-1.11.2.gem (http://rubygems.global.ssl.fastly.net/gems/bundler-1.11.2.gem)
I added these files on an intranet server, keeping the folder structure of the links above:
$INTRANET_HOME
spec.4.8.gz e latest_specs.4.8.gz
$INTRANET_HOME\quick\Marshal.4.8
bundler-1.11.2.gemspec.rz
$INTRANET_HOME\gems
bundler-1.11.2.gem
Then I added my intranet to access gem source:
gem sources -a http://mydomain.com.br
I have run with the success the "gem install bundler" after installation, all it took was remove my intranet of the gem:
gem sources -r http://mydomain.com.br
I hope that is useful in any similar situation....
As a Windows 10 user, I followed Dheerendra's answer, and it worked for me one day. The next day, I experienced the issue again, and his fix didn't work. For me, the fix was to update bundler with:
gem update bundler
I believe my version of bundler was more than a few months old.
Make sure of that you have installed ruby with --disable-binary option,
if not, uninstall it and reinstall it with the option.
more info here
The answer is no longer valid. Since I have encountered the issue with older Windows ruby right now. I'll post the answer:
When I wanted to install an activesupport gem:
gem in activesupport --version 5.1.6
ERROR: Could not find a valid gem 'activesupport' (= 5.1.6), here is why:
Unable to download data from https://rubygems.org/ - SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B
: certificate verify failed (https://api.rubygems.org/specs.4.8.gz)
The following steps need to copy only the certificates from newer windows ruby.
Take the latest ruby (or at least ruby 2.4.0) and do the following:
copy certificates from these directories (adjust to your needs):
C:\prg_sdk\rubies\Ruby-2.4\lib\ruby\2.4.0\rubygems\ssl_certs\rubygems.org
C:\prg_sdk\rubies\Ruby-2.4\lib\ruby\2.4.0\rubygems\ssl_certs\index.rubygems.org
to destination (again adjust to what you need):
C:\prg_sdk\rubies\Ruby231-p112-x64\lib\ruby\2.3.0\rubygems\ssl_certs
go to rubygems and download the latest version works for me. I'm using windows.
I've recently been trying to work with Amazon EC2 to upload my first Rails project. In that process I vaguely remember configuring a key somewhere in the command line to let me connect to the EC2 instance. Anyway, since that (I think), I'm unable to install Ruby Gems as I get the error:
I've been looking for hours to try and fix this with no joy so any help would be greatly appreciated!
It seems your gem config is still looking at https://gemcutter.org.
Visiting this in your browser you will quickly realise the problem, the SSL certificate is signed for rubygems.org
I suggest you change your gem source to https://rubygems.org
Try setting the gem source
gem sources --add https://rubygems.org/
Now if you run
gem sources
you should get something like
*** CURRENT SOURCES ***
https://gemcutter.org/
https://rubygems.org/
So remove gemcutter.org too
gem sources --remove https://gemcutter.org/
Then you should be fine.
When I try to install gem like bundler or rake after creating new gemset , its not installing
,but if i intall old version its working fine for me . Here are the error logs while installing gems
gem install rake
Fetching: rake-0.9.2.2.gem ( 7%)ERROR: While executing gem ... (Gem::RemoteFetcher::FetchError)
too many connection resets (http://cachefly.mirrors.rubygems.org/gems/rake-0.9.2.2.gem)
This problem was caused by the cachefly server.
It seems that the folks over at rubygems.org disabled this mirror and then people's downloads were able to continue successfully.
There is a thread over at rubygems.org discussing this issue.
Use DevKit to install gem separately .
Edit :
Please check if you curl or wget that URL:
wget http://production.cf.rubygems.org/gems/rails-2.3.8.gem
curl -O http://production.cf.rubygems.org/gems/rails-2.3.8.gem
If not, then the problem is with your internet connection, http proxy or
provider.
If your browser works, might be due an HTTP proxy.
I had a similar issue when Capistrano was running a bundle install on a remote server. It seems to have been caused by a .rvmrc file in the project that I had not authorised.
So all I had to do to fix is was ssh into the server, cd into the project and accept the .rvmrc config file.
got similar problem
gem install rails
# after 5 minutes
WARNING: Error fetching data: too many connection resets (http://production.s3.rubygems.org/latest_specs.4.8.gz)
gem install rails --source 'https://rubygems.org'
# after 5 minutes
WARNING: Error fetching data: too many connection resets (http://production.s3.rubygems.org/latest_specs.4.8.gz)
but when I create Gemfile
source 'https://rubygems.org'
gem 'rails', '3.2.13'
and run bundle install it works
my location is London, UK
(also created topic on http://help.rubygems.org/discussions/problems/4494-too-many-connection-resets-when-gem-install-rails )
Always check if your computer isn't downloading because of administrator privileges (in cmd, shell, or rubymine).
My app is working with no problems in my local machine, but when I upload it to my server, I get this error:
Could not find mail-2.2.14 in any of the sources (Bundler::GemNotFound)
I checked with gem list and mail-2.2.14 is installed, I don't know what is happening. I uploaded another app to the same server and it worked fine.
Anyone can help me ?
EDIT
I Solved the problem running
bundle update mail
Check which ruby your passenger is using.
If you are using nginx, go to nginx.conf and check what is the value for passenger_ruby property
If you are using apache, go to httpd.conf and check what is the value for PassengerRuby property
Make sure that is the same with the value with the ruby from which ruby command.
If you are using bundler, make sure you already run the bundle update command.
You could try checking in the gem in your vendor/cache folder.
bundle install should cache the gems locally and install from them if they are present.
Do you have a full stack trace?