I can't seem to figure out how to count all the values in 1 column only if the string also appears in another column. For example
Column A
Apple
Apple
Pear
Plum
Orange
Orange
Kiwi
Column B
Pear
Plum
Orange
Plum
Kiwi
The Countif formula of Column A should return 5 since it counts every cell in column A other than Apple since it is not in column B.
I can't think of a way to do this with COUNTIF, but if you're able to add another column to your data, you can do the following formula.
=IF(OR(A2=$B$2:$B$6),1,0)
Be sure to press and hold Ctrl + Shift and then press Enter after entering the formula, as this is an array.
A B C
Apple Pear =IF(OR(A2=$B$2:$B$6),1,0)
Apple Plum
Pear Orange
Plum Plum
Orange Kiwi
Orange
Kiwi
Then you can run this formula down column C for every value in A. Finally, sum all the values in Column C to get your expected value of 5
------EDIT--------
If you want to do this without adding extra columns, one option is to add your own custom function (UDF). Open up the VBA editor, add a module where your UDF will reside, and then copy and paste the following code
Function customCount(countRange As Range, searchRange As Range)
Dim count As Integer
count = 0
For Each cell In countRange
If Not searchRange.Find(cell) Is Nothing Then
count = count + 1
End If
Next cell
customCount = count
End Function
This function takes two inputs; countRange and searchRange. countRange is all the data in your column A, and searchRange is your column B (Be sure to only select the data)
If your data was just the data above, the formula you would put below your column A data would be the following
=customCount(A2:A8,B2:B6)
Related
I have a table with three Columns:
Column A: name of Item,
Column B: Lowest value of series,
Column C: the Highest value of series.
enter image description here
What I want to achieve is:
Generate series of item sequence from lowest number to highest number per row
So Apple 7 9 will yield: "Apple_7", "Apple_8", "Apple_9"
Concatenate/Join such sequence per row into Column D
So
Item
From
Until
Result
Apple
7
9
"Apple_7, Apple_8, Apple_9"
Berry
3
8
"Berry_3, Berry_4, Berry_5, Berry_6, Berry_7, Berry_8"
Doing it all using one Arrayformula, so that new row added can be automatically calculated.
Here is example sheet: https://docs.google.com/spreadsheets/d/1R5raKmmt5-aOIorAZGHjv_-fdySKWjCMB_FRQwm1vag/edit#gid=0
I tried in Column D:
arrayformula(textjoin(", ",true,arrayformula(A3:A&"_"&sequence(1,C3:C-B3:B+1,B3:B,1))))
Apparently, the sequence function only take value from Column B and join it in first row.
Any help will be appreciated.
Try below BYROW() formula (see your file, harun24hr sheet).
=BYROW(A3:INDEX(A3:A,COUNTA(A3:A)),LAMBDA(x,TEXTJOIN(";",1,INDEX(x&"_"& SEQUENCE(INDEX(C:C,ROW(x))-INDEX(B:B,ROW(x))+1,1,INDEX(B:B,ROW(x)))))))
Here A3:INDEX(A3:A,COUNTA(A3:A)) will return a array of values as well cell reference from A3 to last non empty cell in column A (Assume you do not have any blank rows inside data). If you have blank row, then you have to use different approach. See this post by #TheMaster
Then LAMBDA() will apply TEXTJOIN() and SEQUENCE() function for each cell of B as well as C column.
SEQUENCE() will make series from start to end number and by concatenating A column and will generate your desired strings.
Finally TEXTJOIN() will join all those strings with delimiter to a single cell.
try REDUCE:
=INDEX(QUERY(REDUCE(, A3:INDEX(A:A, MAX(ROW(A:A)*(A:A<>""))),
LAMBDA(x, a, {x; JOIN(, LAMBDA(i, f, u, i&"_"&SEQUENCE(1, u-f+1, f)&";")
(a, OFFSET(a,,1), OFFSET(a,,2)))})), "offset 1", ))
I'm trying to make a spreadsheet to find the best price of a product in Google Sheets. I have the product description on B column, starting from the sixth row and below, the prices are on column E6 and on, (F6, G6, H6,...) Each supplier name is written on the fist row of their Columns. The lowest price is in column C and Column D displays the supplier with that price.
I've tried the min() function, but there's an issue, I need it to bypass 0 values.
On column C, I'm using this code =min($E6:$Z6) and for displaying the supplier I'm using =index($E$1:$Z$1,0,match(min($E6:$Z6),$E6:$Z6,0))
I'll add a screenshot of the problem.
wrap it into simple IF or IFERROR
=IF(MIN($E6:$Z6)=0, , MIN($E6:$Z6))
and the second one:
=IFERROR(INDEX($E$1:$Z$1, 0, MATCH(MIN($E6:$Z6), $E6:$Z6, 0)))
I have a table that connects serial numbers to items (e.g. 1 - Orange, 2 - Apple, 3 - Banana)
In col A I have a list of serial numbers and in col B I want each to fetch the relevant item.
Example,
col A: 2,1,3,1
col B should show: Apple,Orange,Banana,Orange
col A updates automatically so I need the function in B to auto update as well. I'm trying to use the ARRAYFORMULA function where the cell range is fixed (the table linking # to items) and where the array should run on the offset_rows
The formula should look something like:
=arrayformula('Table',A1:A,0)
but it doesn't work. It seems as if the array can only be on the cell range (the Table) and not on the offset_rows (A1:a).
Can I use the arrayformula that way? If not, are there any alternatives?
VLOOKUP should work instead. Try this formula in cell B1:
=ArrayFormula(IFERROR(VLOOKUP(A:A,Table,2,0)))
I set up an example sheet here:
https://docs.google.com/spreadsheets/d/1r8jqUo5tY0s4K3Bhxxstn2__sdtMtiaeMO29ik9XUuw/edit?usp=sharing
Below is an example of a table I have, what I am trying to do is get the value in the value column for a specific criteria based on the last occurrence (not including today's date).
So in the example below I want to find the value for the last occurrence of 'A', which is 12.
I think this can be done using an Index-Match, I just can't get my head around it though.
For example
Todays Date: 15/12/2013
---------------------------------|
|Date | Criteria | Value
|--------------------------------|
|12/11/2013 | A | 3 |
|16/11/2013 | B | 6 |
|27/11/2013 | C | 7 |
|3/12/2013 | A | 12 |
|5/12/2013 | B | 8 |
|15/12/2013 | A | |
----------------------------------
EDIT:
I would also like to add that this formula will be in a different sheet to the table above. The sheet reference in the formula also needs to be dynamic, it will draw the sheet name from another cell.
I would use this formula:
=index(C:C,max(arrayformula(match(filter(A:A,B:B="A",C:C<>""),A:A,0))),1)
This formula assumes that your data is in the columns A,B,C and for every "A" value in the Criteria column, the Date is different. (If that's not the case, then this formula won't work, see below.
Let's look the formula inside from outside:
filter(A:A,B:B="A",C:C<>"") - This will result with the dates where there is an "A" in the Criteria column, and where the Value column is not empty.
arrayformula(match(filter(A:A,B:B="A",C:C<>""),A:A,0)) - In this step we basically find the row number in which those dates are present. The match function will search for the dates (counted in step 1). The arrayformula is needed because there will be more results.
max(arrayformula(match(filter(A:A,B:B="A",C:C<>""),A:A,0))) - This will find the maximum row number (The maximum row number which contains an "A" in the Criteria column)
index(C:C,max(arrayformula(match(filter(A:A,B:B="A",C:C<>""),A:A,0))),1) - Finally, we use the INDEX function to navigate to the value, which has the maximum row number.
Now, if you want this formula to work on another sheet, you should write, instead of for example:
=index(C:C,... => =index(Data!C:C,...
Assuming that your data is in your Data worksheet.
If you want to this sheet to be dynamic, it's a bit tricky. Let's assume, that you're getting the value of the sheet name from the G1 cell. Then you should write:
=index(indirect(concatenate(G1,"!C:C")),...
This is not so pretty as you should do this for every occasion when it occurs in that long formula (described earlier). Instead you can do some pre-work.
Let's write this to your H1 cell: =concatenate(G1,"!C:C") - If in the G1 cell the sheet name is "Data", then the H1 cell should contain: Data!C:C, similarly you can add to the
H2 cell: =concatenate(G1,"!A:A"),
H3 cell: =concatenate(G1,"!B:B")
Now you can write (and that's the final answer for your question I think):
=index(indirect(H1),max(arrayformula(match(filter(indirect(H2),indirect(H3)="A",indirect(H1)<>""),indirect(H2),0))),1) - where H1,H2,H3 will reference to your Data sheet's columns.
I hope it helps.
Use the following formula to accomplish that.
Formula
=QUERY(
B1:D6, // data
"SELECT D // select
WHERE // where clause
C = 'A' AND // first criterium
D IS NOT NULL // second criterium
ORDER BY B DESC // order by
LIMIT 1, // limit
0" // headers
)
for copy/paste
=QUERY(B1:D6, "SELECT D WHERE C = 'A' AND D IS NOT NULL ORDER BY B DESC LIMIT 1", 0)
Explained
The clue to the formula is the usage of the ORDER BY and the LIMIT options within the QUERY formula. The WHERE clauses will prepare the result in the first place. Next, column B (the dates) is ordered descendingly (highest first). The LIMIT option sets the amount of rows to be displayed at 1.
Example
I've created an example file for you: Lookup value based on latest matching Criteria
I appreciate this is a slightly old question, but there is a way that I achieved the goal of filtering an array which I found both more conceptually straightforward, and also more generally applicable than the other answers I have seen, using vlookup's definitional ability to pick the first matching value in an array.
PROBLEM, RESTATED:
Assuming sample data:
A...B...C...D...E, created by a google form
A is the form entry date
B, C and D are entries from a list (let's assume they are e.g. product name, geography, and sales date)
E is the value
If a new value is entered for a particular product, in a geography, on a date, then I want this to be used in preference to the older version of that same data.
SOLUTION:
If, in your form, you create three new columns:
F Unique test
G Test cells combined
H Unique cells
Then in column G, you create a combination of all the cells you want to test on (in this case B, C and E)
cell G2: "=arrayformula(B2:B & char(9) & C2:C & char(9) & D2:D)"
The next column is a restatement of the cells you want to filter based on (in this case the date in A)
cell H2: "=arrayformula(A2:A)"
And then finally in column F we actually undertake the test:
cell F2: "=arrayformula(A2:A=vlookup(G2:G,sort({G2:H},2,false),2,false))"
Breaking that down, the vlookup (vlookup(G2:G,[RANGE],2,false) compares the data in G2, G3...Gn with a [RANGE], which is a virtual array consisting of two columns, G and H, pre-sorted according to cell H in descending order.
i.e. For any unique value of G (the combination of test data) the vlookup will return the largest value of H
The last part is a simple comparison to the original data (A2, A3... An) to return TRUE or FALSE based on whether it is the latest version of the unique value.
A final step if needed would be to create a new sheet with "=filter('Form Responses 1'!A:E,'Form Responses 1'F:F=TRUE) to recreate the data without the older versions.
Hope this helps.
I have the following Google Sheets data:
Name1 Name2 Name3 Value
A B C 20
B A C 30
C D F 40
What I'm trying to do is see if a specific name appears in any of the three name columns. If it does, then sum all the values in the "Value" column for all matching rows.
For example, I want to sum all of the values for name "A". That name only appears on the first two rows, so it should do 20+30 to give me 50. If I change the searched name to "C", that appears in all three rows so it should sum all of the numbers: 20+30+40. The algorithm needs to adjust and search appropriately.
=DSum will work
With the example you give use
=dsum(A1:D4,D1,{A1;"A"})+dsum(A1:D4,D1,{B1;"A"})+dsum(A1:D4,D1,{C1;"A"})
You can swap the "A" for a Cell reference
see https://drive.google.com/previewtemplate?id=0As3tAuweYU9QdEVHdTFHNzloSTY4LVYxdW9LdHRHbEE&mode=public#