Error while running pub deploy: Cannot read link - dart

I'm trying to run pub deploy command in my Dart project, but it always ends with this error: "Pub deploy failed, [1] Cannot read link". No more information outputs into console.
I tried to run it in basic Dart browser project (the one with text reversing), but same error occurred again.
Did anyone have same problem? Any ideas how to fix it?

I have the same issue.
In my case, the Dart project is stored in NTFS hard drive (I share it with Windows OS) and Dart deploy (run from Eclipse) runs on Ubuntu.
Simply move the Dart project to Ubuntu hard drive then things come back to normal.
GS

This is probably a problem with the packages symlinks. If you delete them and run pub install it should work again.

According to dart-sdk/lib/io/link.dart:
On the Windows platform, the link will be created as a Junction
On other platforms, the posix symlink() call is used to make a symbolic link
On Linux platforms, storing Dart project in NTFS drive causes Pub to fail. Because posix symlink() is used on NTFS partition and doesn't create a valid NTFS junction point.
The solution is to move the project folder to a partition that uses posix symlinks natively, such as one formatted to ext4.

Related

'"erl.exe"' is not recognized as an internal or external command, operable program or batch file

'"erl.exe"' is not recognized as an internal or external command,
operable program or batch file.
Elixir and Erlang were running fine until today when I did a version update. I don't really have access to a good version manager for Elixir since I use a windows computer so I just ran the Elixir install wizard to uninstall and reinstall to update the version. I have uninstalled and reinstalled a couple of times as well as checked the elixir forum for solutions (there was 1 solution, it didn't work) for solutions. I need to get Elixir up and working pretty quickly as I am about to start on my first contract.
Instead of using
erl <'command details'>
Try to run using "./" prefix so it become
./erl <'command details'>
in the cli.
I am also using windows and have added elixir, erlang and erts paths in env. But still, it is giving me the same error. I am not getting the error. I did not update the version. My system was slow hence I deleted some files, but they were explicit. They didn't have anything to do with the elixir folder.

Delphi 5 Installation Error

I am trying installing Delphi 5 on my computer. As soon as the installation starts I get:
Error copying File
followed by:
Setup has detected a -113 error while attempting to copy files. This
indicates that setup could not find a file in the "RunImage" directory.
Now the setup file does includes "RunImage" directory. The File is located in the D drive on another computer which I have mapped to my computer as Drive Z and I am running it from the Mapped Drive Z.
I searched online for this Error. Some recommend that if I am installing from a network location then the location has to mapped to my computer as a Driver with a name to solve the issue. I did map the location but still getting the same error.
As J.. already suggested in his comment: Windows >= Vista automatically runs programs containing the string "setup" in the name in elevated mode. In that mode, you don't have the same mapped drives as in your normal user mode. So, the program starts (which is actually inconsistent with security model, because in elevated mode, the executable itself should not be available) and then cannot find any additional files because the drive mapping does not exist.
Solution: Copy the whole installation directory to a local drive. You can delete it after the installation has finished.
Note: While I think this will solve that particular problem, it does not mean, that the rest of the installation will work.
i had same problem and i solved it by this method:
After unpacking the archive(the delphi5 zip file that you downloaded), make the root directory with the command Subst X: "path to installer". Run the standard Borland installer, the Install.exe program, there.

Unable to run 'tcl' file on Vivado 2016.4 version

I am trying to run a .tcl file originally configured for 2014.4 on 2016.4 version of Vivado. However I am getting the following error:
while executing
"create_bd_cell -type ip -vlnv xilinx.com:ip:mig mig_0 "
(procedure "create_root_design" line 111)
invoked from within
"create_root_design """
(file "all.tcl" line 405)
The tcl file uses the part 'xcku040-ffva1156-2' and tries to access the IP 'mig' which I believe is renamed/changed on later versions. Is there any workaround for this?
Steps I have done till now:
Changed the version number to 2016.4
tried replacing target boards.
tried on the same board with an alternate IP for mig.
tried on both 2016.4 and 2015.4 versions
None of these have worked so far
Attaching the '.tcl' file for reference : all.tcl
Since with every version upgrade of the Vivado Design Suite, parts are renamed or removed, it is not possible to run a .tcl file meant for an earlier version in newer releases. So I ran the above query on Xilinx Community Forums and found a workaround:
Run this script on the previous version(2014 in this case), generate the design and then open the same design using the next major release(2015 version). The 2015 version will automatically suggest upgrades to the discontinued/renamed IPs. Repeat the same to get to 2016 version. That's the only way to get this done. Also have to keep checking if the core functionality of the IP is the same after automated upgrades by Vivado Design Suite.

dxgettext and Windows 10

Has anyone got dxgettext running under Windows 10?
I installed dxgettext from the offical homepage under Windows 10, which worked fine.
But whenever I try to run some of the installed tools (e.g. msgfmt.exe), they don't really run, but call themselves again, generating thousands of processes and making the system crawl.
This is what happens:
I call msgfmt --help
the executable msgfmt hangs, blocking the command window
in the TaskManager I see houndreds of msgfmt.exe processes popping up
I think, I have to replace the gettext tools of the dxgettext package with some newer version but before trying to figure it out I first wanted to ask if someone else experienced similar problems and found a working solution.
My questions:
Has anyone got the tools coming with dxgettext running under Windows 10?
What steps have been necessary to get it to run?
I resolved the problem in the following way:
I downloaded https://github.com/mlocati/gettext-iconv-windows/releases/download/v0.19.8.1-v1.14/gettext0.19.8.1-iconv1.14-static-32.zip from https://mlocati.github.io/articles/gettext-iconv-windows.html
I replaced the following files from the installation directory of dxgettext with files from the zip archive:
msgattrib.exe
msgcat.exe
msgcmp.exe
msgcomm.exe
msgconv.exe
msgen.exe
msgexec.exe
msgfilter.exe
msgfmt.exe
msggrep.exe
msginit.exe
msgmerge.exe
msgunfmt.exe
msguniq.exe
xgettext.exe
Result:
Dxgettext and the tools, I use, seem to work fine. I found no problems with my workflow so far, with one exception:
If I use assemble to embed mo-files into an exe compiled with JvGnugettext.pas, I get the following error:
Pach code “6637DB2E-62E1-4A60-AC19-C23867046A89” was not found in .exe file. Are you sure the .exe file has been compiled with the correct libraries?
This may not be related to the original problem. However, it is resolved by replacing the original assemble.exe with the version from https://sourceforge.net/p/dzlib/code/HEAD/tree/buildtools/trunk/ (see answer by #dummzeuch).
The installer on the official home page is pretty old. Last time I looked it contained several outdated dlls and executables from the original gnugettext project that did not work correctly under recent Windows versions. You could take those from my buildtools repository on OSDN. These work for me. No guarantee that they work for you though.
https://osdn.net/projects/dzlib-tools/scm/svn/tree/head/buildtools/trunk/
I've been having these issues too with dxgettext 1.22, in Windows 10 1607. I changed some DLLs at first but kept having the bash.exe looping and hogging my PC to death.
So what I did was basically install latest Cygwin 32bit and replaced the appropiate DLLs. I kept the ones for gettext. Instructions:
Download and fresh install dxgettext-1.2.2.exe from http://dxgettext.po.dk/download as admin. Restart.
Download Cygwin 32bit from https://cygwin.com/install.html in a different folder from dxgettext (I took the default, c:\cygwin)
Run setup-x86.exe and select "Base" Package (Install). Next, Select Required packages just in case.
Move the following files from dxgettext folder to a backup folder (we'll use some DLL later):
cyg*.dll
bash.exe
Copy from c:\cygwin to the dxgettext folder the following files:
bash.exe (set to run as admin)
cygwin1.dll
cygiconv-2.dll
cygintl-8.dll
cygreadline7.dll
cyggcc_s-1.dll
cygncursesw-10.dll
Recover the file(s) below from the backup folder (See #4) and copy to the dxgettext folder.
cyggettextsrc-0-14-1.dll
cyggettextlib-0-14-1.dll
cygintl-3.dll
Running like this, you might get error 740 (requires elevation). So: Set ggmerge.exe,ggfmt.exe to run as admin
** EDIT** Found online this very interesting link, from a programmer who offers a free backup written in Delphi. The good thing is he adapted the dxgettext tools to run in Windows 10. This helped me a lot.
http://personal-backup.rathlev-home.de/translate.html

Windows x64 RabbitMQ install error with Erlang environment var (ERLANG_HOME)

I'm ask/answering this question because it hung me up & it's likely someone else will have the same problem.
Install of RabbitMQ x64 v2.8.6 on Windows Server 2008 x64.
After Erlang install using default install location to C:\Program Files\erl5.9.2, I'm attempting to start the server via running the rabbitmq-service.bat. Fail:
Please either set ERLANG_HOME to point to your Erlang installation
or place the RabbitMQ server distribution in the Erlang lib folder.
Problem is the .bat file does not have the correct subpath. with 5.9.2 (R15B02) version of erlang. My ERLANG_HOME directory is set correctly, but the script does not use it correctly for this version of Erlang, which, it appears to this Erlang noob to have a new subdirectory called "erts-5.9.2" which is causing the problems. Maybe someone intimate with these scripts can describe how to make this work correctly without the hack workaround I'm about to describe?
1- Set environment variable:
Variable name : ERLANG_HOME
Variable value: C:\Program Files (x86)\erl6.4
note: don't include bin on above step.
2- Add %ERLANG_HOME%\bin to the PATH environmental variable:
Variable name : PATH
Variable value: %ERLANG_HOME%\bin
This works well.
There are several RabbitMQ control .bat files on windows. Every one you use needs to get changed to reflect the Erlang path correctly. In this example, I'm editing the rabbitmq-server.bat because it's one of the easier ones... any of the .bat files you want to run will need this hack to get them to work, with the rabbitmq_service.bat file being the most involved to adjust.
editing that rabbitmq_server.bat file, you can see on about line 48 or so there's a check to see if the erl.exe is found, but the path isn't correct:
if not exist "!ERLANG_HOME!\bin\erl.exe" (
that path does not match the file structure for the 5.9.2 version of Erlang. I fixed this by simply removing this path check from about line 48 to 58, then, where the .bat actually makes a call to the erl.exe on about line 129 which reads:
"!ERLANG_HOME!\bin\erl.exe"
I simply hardcoded the path to my erl.exe:
"C:\Program Files\erl5.9.2\erts-5.9.2\bin\erl.exe"
With the pathing correct, the rabbitmq .bat files will run.
I had the similar issue, modifying ERLANG_HOME in .bat files did not work. Then I tried echo %ERLANG_HOME% in command prompt, that did not print the environment variable value(I could see that ERLANG_HOME environment variable has been created under advance system settings), that lead me to believe that I need to restart server for 64 bit installation of Erlang. After rebooting server, It worked like a charm. I hope this helps someone.
Just to share an up-to-date answer as of 2019: On Windows Server 2019, after setting up the environment variable, a restart is required to solve the problem.
I got into same kind of problem.
I solved it by doing three changes as given below.
Update Path variable "ERLANG_HOME" : "C:\Program Files\erl8.0" in Environment Variables.
Upadte "Path" variable "Path" : ";%ERLANG_HOME%\bin;"
Give urself FULL CONTROL permissions over "Program Files" in C drive.
It worked for me in this way.
This problem still occurs in Erlang 18.3 (erl7.3) and RabbitMQ 3.6.9 on Windows when upgrading from any older version of RabbitMQ to version 3.6.9. The solution as already stated here is to manually set ERLANG_HOME with 'setx -m ERLANG_HOME "C:\Program Files\erl7.3"' before starting the service.
What happens is that the RabbitMQ 3.6.9 installer removes the environment variable ERLANG_HOME from the system while removing the older version of RabbitMQ. Then, when it proceeds to the installation step, it does not put back the ERLANG_HOME variable. Then, the batch files that start up RabbitMQ cannot find Erlang. They try to find Erlang's home directory using "where.exe" but it always fails after an upgrade.
RabbitMQ's installer also does not kill all of the Erlang background processes, causing many of its files to be undeletable due to the Windows "file in use" problem. This leaves behind "files in use" in %APPDATA%\RabbitMQ and "C:\Program Files\RabbitMQ." These processes are "erl.exe," "erlsrv.exe," and "epmd.exe." The RabbitMQ installer should taskkill these processes after shutting down the RabbitMQ Windows service.
RabbitMQ is rather clunky on Windows.
Download Erlang or OTP - Only one Version of OTP should be installed
Download RabbitMQ installer
Install both exe file as Administrator
Set class path for Erlang. (Setting classpath is a bit troublesome, so follow these steps)
Set a new path with name ERLANG_HOME and value C:\Program Files\erl-23.1 (do not copy bin folder here)
Edit System "path" and add %ERLANG_HOME%\bin
Go to Start - Open rabbitmq command promt and run
rabbitmq-plugins enable rabbitmq_management
Navigate to localhost:15672
Use guest/guest to login
Interesting that this worked for you. There is record of a two bugs in Erl5.9.2 that cause an incomplete installation where %ERLANG_HOME%\bin is not installed.
Either of
* Installed 64bit erlang on 32bit machine
* "The program can't start because MSVCR100.dll is missing from your computer."
https://groups.google.com/d/topic/erlang-programming/wGtFLzapiQ0/discussion
Try 5.9.1 or any other version. They also mention making the future versions of the installer alert you if it fails.
I just had the same problem mentioned here. I installed otp_win64_R15B02 on a Windows 7 machine and everything worked perfectly, but I used the same installer on a Windows 2008 server and the bin directory was not created. I then uninstalled otp_win64_R15B02 and downloaded the otp_win64_R15B02_with_MSVCR100_installer_fix and the bin directory was created.
I suspect the reason it worked on my Windows 7 system is that I have Visual Studio installed and the required libraries were already available which allowed the otp_win64_R15B02 installer to work correctly.
Oh, and if you're installing Erlang to run RabbitMQ the RabbitMQ install will succeed with the broken installer but installing otp_win64_R15B02_with_MSVCR100_installer_fix after RabbitMQ will not work, just un-install and re-install RabbitMQ to resolve this.
Just give C:\Program Files\erl10.6\ not C:\Program Files\erl10.6\bin\erl.exe in the environment variable. If you open the server.bat file I came to know the issueenter image description here
I think this is encoding issue on windows.I see a correct value but I write echo %ERLANG_HOME% on console the value come with question mark. These steps fix it.
1.go environment variable window
2.edit ERLANG_HOME item
3.copy the value, open notepad and paste there
4.copy again on notepad and paste to edit window
5.apply and exit window
6.close command line tools and reopen
7.run rabbitmq bat file.
I solved it in a quick and dirty way,without naming path variables
I've opened the bat file and replaced every occurrence of
!ERLANG_HOME!\bin\erl.exe
with hard coded path for example might be diffrent path for you because of diffrent version
C:\Program Files\erl10.3\erts-10.3\bin\erl.exe
and replaced
%RABBITMQ_HOME%\escript\rabbitmq-plugins
with
C:\Program Files\RabbitMQ Server\rabbitmq_server-3.7.14\escript\rabbitmq-plugins
Even I was this problem. The issue was the environment variable ERLANG_HOME=c:\Program Files\erl9.0 which was never existed.
I cross checked the path. The correct path was c:\Program Files\erl9.3.
After correcting the
ERLANG_HOME=c:\Program Files\erl9.3
the problem solved. So, definitely it is a path issue.
In my case, it should be installed erlang using admin role running
If above solutions doesn't work for you then you can try following
Find another compatible version of erlang for your rabbit mq e.g. for rabbit 3.7.x erlang version 20.3.x to 22.0.x all are compatible .
Right click newly downloaded erlang version and from properties select the option to unblock the file .
Run the erlang with admin persssion .
Re run rabbit mq exe

Resources