I'm ask/answering this question because it hung me up & it's likely someone else will have the same problem.
Install of RabbitMQ x64 v2.8.6 on Windows Server 2008 x64.
After Erlang install using default install location to C:\Program Files\erl5.9.2, I'm attempting to start the server via running the rabbitmq-service.bat. Fail:
Please either set ERLANG_HOME to point to your Erlang installation
or place the RabbitMQ server distribution in the Erlang lib folder.
Problem is the .bat file does not have the correct subpath. with 5.9.2 (R15B02) version of erlang. My ERLANG_HOME directory is set correctly, but the script does not use it correctly for this version of Erlang, which, it appears to this Erlang noob to have a new subdirectory called "erts-5.9.2" which is causing the problems. Maybe someone intimate with these scripts can describe how to make this work correctly without the hack workaround I'm about to describe?
1- Set environment variable:
Variable name : ERLANG_HOME
Variable value: C:\Program Files (x86)\erl6.4
note: don't include bin on above step.
2- Add %ERLANG_HOME%\bin to the PATH environmental variable:
Variable name : PATH
Variable value: %ERLANG_HOME%\bin
This works well.
There are several RabbitMQ control .bat files on windows. Every one you use needs to get changed to reflect the Erlang path correctly. In this example, I'm editing the rabbitmq-server.bat because it's one of the easier ones... any of the .bat files you want to run will need this hack to get them to work, with the rabbitmq_service.bat file being the most involved to adjust.
editing that rabbitmq_server.bat file, you can see on about line 48 or so there's a check to see if the erl.exe is found, but the path isn't correct:
if not exist "!ERLANG_HOME!\bin\erl.exe" (
that path does not match the file structure for the 5.9.2 version of Erlang. I fixed this by simply removing this path check from about line 48 to 58, then, where the .bat actually makes a call to the erl.exe on about line 129 which reads:
"!ERLANG_HOME!\bin\erl.exe"
I simply hardcoded the path to my erl.exe:
"C:\Program Files\erl5.9.2\erts-5.9.2\bin\erl.exe"
With the pathing correct, the rabbitmq .bat files will run.
I had the similar issue, modifying ERLANG_HOME in .bat files did not work. Then I tried echo %ERLANG_HOME% in command prompt, that did not print the environment variable value(I could see that ERLANG_HOME environment variable has been created under advance system settings), that lead me to believe that I need to restart server for 64 bit installation of Erlang. After rebooting server, It worked like a charm. I hope this helps someone.
Just to share an up-to-date answer as of 2019: On Windows Server 2019, after setting up the environment variable, a restart is required to solve the problem.
I got into same kind of problem.
I solved it by doing three changes as given below.
Update Path variable "ERLANG_HOME" : "C:\Program Files\erl8.0" in Environment Variables.
Upadte "Path" variable "Path" : ";%ERLANG_HOME%\bin;"
Give urself FULL CONTROL permissions over "Program Files" in C drive.
It worked for me in this way.
This problem still occurs in Erlang 18.3 (erl7.3) and RabbitMQ 3.6.9 on Windows when upgrading from any older version of RabbitMQ to version 3.6.9. The solution as already stated here is to manually set ERLANG_HOME with 'setx -m ERLANG_HOME "C:\Program Files\erl7.3"' before starting the service.
What happens is that the RabbitMQ 3.6.9 installer removes the environment variable ERLANG_HOME from the system while removing the older version of RabbitMQ. Then, when it proceeds to the installation step, it does not put back the ERLANG_HOME variable. Then, the batch files that start up RabbitMQ cannot find Erlang. They try to find Erlang's home directory using "where.exe" but it always fails after an upgrade.
RabbitMQ's installer also does not kill all of the Erlang background processes, causing many of its files to be undeletable due to the Windows "file in use" problem. This leaves behind "files in use" in %APPDATA%\RabbitMQ and "C:\Program Files\RabbitMQ." These processes are "erl.exe," "erlsrv.exe," and "epmd.exe." The RabbitMQ installer should taskkill these processes after shutting down the RabbitMQ Windows service.
RabbitMQ is rather clunky on Windows.
Download Erlang or OTP - Only one Version of OTP should be installed
Download RabbitMQ installer
Install both exe file as Administrator
Set class path for Erlang. (Setting classpath is a bit troublesome, so follow these steps)
Set a new path with name ERLANG_HOME and value C:\Program Files\erl-23.1 (do not copy bin folder here)
Edit System "path" and add %ERLANG_HOME%\bin
Go to Start - Open rabbitmq command promt and run
rabbitmq-plugins enable rabbitmq_management
Navigate to localhost:15672
Use guest/guest to login
Interesting that this worked for you. There is record of a two bugs in Erl5.9.2 that cause an incomplete installation where %ERLANG_HOME%\bin is not installed.
Either of
* Installed 64bit erlang on 32bit machine
* "The program can't start because MSVCR100.dll is missing from your computer."
https://groups.google.com/d/topic/erlang-programming/wGtFLzapiQ0/discussion
Try 5.9.1 or any other version. They also mention making the future versions of the installer alert you if it fails.
I just had the same problem mentioned here. I installed otp_win64_R15B02 on a Windows 7 machine and everything worked perfectly, but I used the same installer on a Windows 2008 server and the bin directory was not created. I then uninstalled otp_win64_R15B02 and downloaded the otp_win64_R15B02_with_MSVCR100_installer_fix and the bin directory was created.
I suspect the reason it worked on my Windows 7 system is that I have Visual Studio installed and the required libraries were already available which allowed the otp_win64_R15B02 installer to work correctly.
Oh, and if you're installing Erlang to run RabbitMQ the RabbitMQ install will succeed with the broken installer but installing otp_win64_R15B02_with_MSVCR100_installer_fix after RabbitMQ will not work, just un-install and re-install RabbitMQ to resolve this.
Just give C:\Program Files\erl10.6\ not C:\Program Files\erl10.6\bin\erl.exe in the environment variable. If you open the server.bat file I came to know the issueenter image description here
I think this is encoding issue on windows.I see a correct value but I write echo %ERLANG_HOME% on console the value come with question mark. These steps fix it.
1.go environment variable window
2.edit ERLANG_HOME item
3.copy the value, open notepad and paste there
4.copy again on notepad and paste to edit window
5.apply and exit window
6.close command line tools and reopen
7.run rabbitmq bat file.
I solved it in a quick and dirty way,without naming path variables
I've opened the bat file and replaced every occurrence of
!ERLANG_HOME!\bin\erl.exe
with hard coded path for example might be diffrent path for you because of diffrent version
C:\Program Files\erl10.3\erts-10.3\bin\erl.exe
and replaced
%RABBITMQ_HOME%\escript\rabbitmq-plugins
with
C:\Program Files\RabbitMQ Server\rabbitmq_server-3.7.14\escript\rabbitmq-plugins
Even I was this problem. The issue was the environment variable ERLANG_HOME=c:\Program Files\erl9.0 which was never existed.
I cross checked the path. The correct path was c:\Program Files\erl9.3.
After correcting the
ERLANG_HOME=c:\Program Files\erl9.3
the problem solved. So, definitely it is a path issue.
In my case, it should be installed erlang using admin role running
If above solutions doesn't work for you then you can try following
Find another compatible version of erlang for your rabbit mq e.g. for rabbit 3.7.x erlang version 20.3.x to 22.0.x all are compatible .
Right click newly downloaded erlang version and from properties select the option to unblock the file .
Run the erlang with admin persssion .
Re run rabbit mq exe
Related
When I start my development rails server I get this following message first. To my knowledge WSL2 is a virtual environment.
I would have expected it to now reference a Java directory that resides on my Windows host. Is this likely something I carried over in the project from when I was using WSL1? How would I safely correct this?
/home/daveomcd/.rbenv/versions/2.6.1/lib/ruby/gems/2.6.0/gems/railties-6.0.3.2/lib/rails/app_loader.rb:53:
warning: Insecure world writable dir /mnt/c/Program Files (x86)/Common Files/Oracle/Java/javapath
in PATH, mode 040777
I experienced the same problem when trying to fix the slowness of WSL2. The recommended solution was to move the files from the mounted NTFS drive to the root ext4 filesystem (using \\$wsl\<distroname>), so I did that.
I set up /etc/wsl.conf as below:
# Enable extra metadata options by default
[automount]
enabled = true
root = /mnt/
options = "metadata,umask=0033"
mountFsTab = false
[interop]
enabled = true
appendWindowsPath = true
And ran rails bundle to update dependencies.
Also make sure that your file permissions and owner settings are updated. Hope it helps.
Sorry, I'd love to make this more of a comment to see if I'm on the right track before committing to an answer. However, since there's too much info here for that, I'll make an attempt at getting you an answer here.
While it is a virtual environment, by default WSL provides several "Windows Interop" features that allow it to:
automatically mount Windows drives in /mnt/{c,d,...}
append the Windows path to the Linux path
run Windows executables inside Linux
share Windows environment variables with Linux (although this is not something that happens by default)
I can't be sure (long, long time since I've used Rails), but it looks like something in the app_loader.rb is checking permissions on Java directories in the path. It may be using some logic like "check each path entry and look for a java or java.exe there. If found, check permissions." Or something like that. That means that (2) and (3) above may be confusing it.
You can see this in action with which java.exe, which will likely return a Windows path. Or run notepad.exe, which will launch the Windows Notepad executable from within Linux/WSL (magic! 😉).
These are both very useful features, so I hate to disable them completely, but it's the easiest way to figure out if that's the problem. Create a /etc/wsl.conf with the following contents:
[interop]
enabled=false
appendWindowsPath=false
Exit your WSL instance and then:
(from PowerShell, CMD, or Windows Start) Run wsl --list --verbose to see the name of your distribution (most likely Ubuntu)
Likewise, run wsl --terminate <distro> to terminate that distribution.
Restart your WSL instance
Try running /mnt/c/Windows/system32/notepad.exe (assuming a normal C:\Windows installation) (should fail, since interop is disabled)
Try which notepad.exe (should fail, since the Windows path should no longer be appended to the Linux path)
Try to start your Rails dev server again - Might work (might not, I could easily be wrong about the root-cause here)
If it does work, then you can try to correct the situation with several less invasive methods than disabling those features entirely:
If you plan on only using WSL for your development, then you could remove the Windows JDK.
Or at least remove the Windows JDK from the PATH in Windows.
Or, if you want to keep it installed and in the Windows path, you could have a shell startup file (e.g. .bashrc) that removes it from the path only in WSL. I'll point you to this question which contains multiple techniques for doing so.
Or you could keep the appendWindowsPath=false in your /etc/wsl.conf but then add back in the paths you want manually in your startup config.
Has anyone got dxgettext running under Windows 10?
I installed dxgettext from the offical homepage under Windows 10, which worked fine.
But whenever I try to run some of the installed tools (e.g. msgfmt.exe), they don't really run, but call themselves again, generating thousands of processes and making the system crawl.
This is what happens:
I call msgfmt --help
the executable msgfmt hangs, blocking the command window
in the TaskManager I see houndreds of msgfmt.exe processes popping up
I think, I have to replace the gettext tools of the dxgettext package with some newer version but before trying to figure it out I first wanted to ask if someone else experienced similar problems and found a working solution.
My questions:
Has anyone got the tools coming with dxgettext running under Windows 10?
What steps have been necessary to get it to run?
I resolved the problem in the following way:
I downloaded https://github.com/mlocati/gettext-iconv-windows/releases/download/v0.19.8.1-v1.14/gettext0.19.8.1-iconv1.14-static-32.zip from https://mlocati.github.io/articles/gettext-iconv-windows.html
I replaced the following files from the installation directory of dxgettext with files from the zip archive:
msgattrib.exe
msgcat.exe
msgcmp.exe
msgcomm.exe
msgconv.exe
msgen.exe
msgexec.exe
msgfilter.exe
msgfmt.exe
msggrep.exe
msginit.exe
msgmerge.exe
msgunfmt.exe
msguniq.exe
xgettext.exe
Result:
Dxgettext and the tools, I use, seem to work fine. I found no problems with my workflow so far, with one exception:
If I use assemble to embed mo-files into an exe compiled with JvGnugettext.pas, I get the following error:
Pach code “6637DB2E-62E1-4A60-AC19-C23867046A89” was not found in .exe file. Are you sure the .exe file has been compiled with the correct libraries?
This may not be related to the original problem. However, it is resolved by replacing the original assemble.exe with the version from https://sourceforge.net/p/dzlib/code/HEAD/tree/buildtools/trunk/ (see answer by #dummzeuch).
The installer on the official home page is pretty old. Last time I looked it contained several outdated dlls and executables from the original gnugettext project that did not work correctly under recent Windows versions. You could take those from my buildtools repository on OSDN. These work for me. No guarantee that they work for you though.
https://osdn.net/projects/dzlib-tools/scm/svn/tree/head/buildtools/trunk/
I've been having these issues too with dxgettext 1.22, in Windows 10 1607. I changed some DLLs at first but kept having the bash.exe looping and hogging my PC to death.
So what I did was basically install latest Cygwin 32bit and replaced the appropiate DLLs. I kept the ones for gettext. Instructions:
Download and fresh install dxgettext-1.2.2.exe from http://dxgettext.po.dk/download as admin. Restart.
Download Cygwin 32bit from https://cygwin.com/install.html in a different folder from dxgettext (I took the default, c:\cygwin)
Run setup-x86.exe and select "Base" Package (Install). Next, Select Required packages just in case.
Move the following files from dxgettext folder to a backup folder (we'll use some DLL later):
cyg*.dll
bash.exe
Copy from c:\cygwin to the dxgettext folder the following files:
bash.exe (set to run as admin)
cygwin1.dll
cygiconv-2.dll
cygintl-8.dll
cygreadline7.dll
cyggcc_s-1.dll
cygncursesw-10.dll
Recover the file(s) below from the backup folder (See #4) and copy to the dxgettext folder.
cyggettextsrc-0-14-1.dll
cyggettextlib-0-14-1.dll
cygintl-3.dll
Running like this, you might get error 740 (requires elevation). So: Set ggmerge.exe,ggfmt.exe to run as admin
** EDIT** Found online this very interesting link, from a programmer who offers a free backup written in Delphi. The good thing is he adapted the dxgettext tools to run in Windows 10. This helped me a lot.
http://personal-backup.rathlev-home.de/translate.html
I'm setting up my first Ruby project on Team City, which is hosted on a Windows Server, but I'm having a problem. Now, because the server may not have the required gems installed, I've added a command line build step:
bundle install
Now I thought this would be enough, but apparently bundle is not recognized as an internal or external command. Except, if I RDP into the server, if I run bundle install from anywhere, it is fine, and just notifies me that no gemfile was found.
Any ideas on if I've missed a step, or I'm going about this the wrong way?
Most likely this is a problem with TeamCity not finding the path to ruby executables.
You can address this by overriding the value to the PATH environment variable in your build configuration in the Build Parameters section.
env.PATH=/path/to/ruby;%env.PATH%
See this answer for the proper links to documentation, etc.
EDIT #1
I noticed when updating one of my configurations that TeamCity is supposed to take care of appending values so you DO NOT need to set path equal to itself. The post mentioned above is a workaround for a bug where TeamCity was overwriting the values, but that has been corrected. See the help at the mouse-over for more information:
EDIT #2
I tested edit #1 and found that is not the case. You do need to
create an environment variable env.Path
and set it's value to itself plus your new path; in my example, C:\Program Files\MySQL\MySQL Server 5.6\bin\;%env.Path%
you do NOT need to say env.Path=... as listed above; that is what the configuration file will look like.
I tested this out by doing the following:
Created a new project with no repository
Added a command line build step to `echo %env.Path%
Added a command step to call MySql mysql --help This will fail if it cannot find MySql
I then ran it for each of the following settings for the env.Path variable:
Not added / changed; TeamCity reports out the environment variable for the build agent as is.
Added as just C:\Program Files\MySQL\MySQL Server 5.6\bin\. TeamCity reports out only that entry.
Added as C:\Program Files\MySQL\MySQL Server 5.6\bin\;%env.Path%. TeamCity prepends C:\Program Files\MySQL\MySQL Server 5.6\bin\ to the build agent's values shown in #1. The result is what we want, #1 + #2
I thought maybe it was a system issue but recently did a fresh install (win7 64bit) and a clean install of conemu (had same problem with both conemu and console2 on old win32 system). Also everything I find researching has to do with adding variables via the command line. I'm doing this through Start->Control Panel->System->Advanced System Settings and then restarting the console. cmd picks up the path correctly.
When I manually add a new path to the system or user PATH variable and then restart the console and echo %path% it has not re-loaded the new PATH variable.
cmd.exe:
C:\Users\lotus>echo %path%
C:\Python33\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\
System32\WindowsPowerShell\v1.0\;C:\Program Files\nodejs\;C:\PHP;C:\ProgramData\
Composer\bin;C:\PHP;C:\PHP\ext;C:\Ruby200-x64\bin;C:\Users\lotus\AppData\Roaming
\npm
conemu:
C:\Program Files\ConEmu>echo %path%
C:\Program Files\ConEmu\ConEmu;C:\Program Files\ConEmu;C:\Python33\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Ruby200-x64\bin
I know there is a extra C:\PHP but that's another issue. I still have the same problem if I remove that.
Thanks
When you are using alternative tab based terminals like ConEmu or Console2, you need to restart the terminal, not a single console (read tab)!
This is because child processes inherit their environment their direct parent process, not from the system!
Sometimes explorer (or whatever shell you are using to start ConEmu) needs to be restarted, as in you have to kill explorer.exe, so your start menu disappears and relaunch it from task manager. If all else fails, log off and on again.
Even if ConEmu is closed, there is a ConEmu64.exe process. Need to kill it.
I’ve added a GRAILS_HOME environment variable, which points to the folder in which I extracted the Grails distribution zip, and I’ve added %GRAILS_HOME%\bin to my path. Yet after I open a new command prompt, the “grails” command is still not found. Does anyone have any clue as to why this is happening?
I’m running Grails 2.2 on Windows 7.
I have the same problem on Windows 7 64 bit and Grails version 2.*
By removing local neither maven repository nor installed plugins repository doesn't help.
I found - just set properties of %GRAILS_HOME%/bin/grails.bat and startGrails.bat as Run in compatibility mode: Windows XP (Service Pack 3).
To do that You need to have local PC Administrators rights.
/igors
have you create JAVA_HOME in there?
Maybe you are experiencing [STS-2530] Problem deploying Grails App if workspace path has a space. Jira shows the issue as resolved but it would not hurt to check that you do not have a space in your workspace path as it my trip up grails.
Do the following.
Go to your command prompt, execute the Path command. If everything has been set right your paths should show up as complete paths starting with C:... If the paths show up with the % sign that means your paths need to be set correctly. I did noticed that in your example you have used the forward slash - I am assuming that is a typo, because that will be a problem.
Another way to trouble shoot the issue is CD to the location C:\Grails\bin, execute the command grails.bat, if it executes you are in a good place that means you have to tweak your paths - following this path might give you a clue about other issues....
You might want to check the bin folder of your grails installation. The grails.bat file could be missing. I had this problem today and solved it by downloading the zip file again.