I have implemented a UIScrollView for my game board, this board is a UIView consists of several images, the image of the board and some images of detail. And the zoom and scroll work well.
But what I do is that when I move the board will not let me get out of the board and see the bottom. Right now when I move the board around the edges sometimes see white, as my picture moves more than up to the stop.
What I want is to put a cap on scrollview not see what's behind only see the board.
I would also like to know if any of you know how I can do to drag images as a given within the board, as this all in a UIScrollView and I recognize there touch.
Thanks in advance
What I want is to put a cap on scrollview not see what's behind only see the board.
Yes, you can limit the visible area to just your content. Set the scroll view's bounces property to NO and make sure that the contentInset is 0. (0 is the default for contentInset, so it should be fine if you haven't changed it.)
how I can do to drag images as a given within the board
Scroll views have the option to delay touch events in the content view until the scroll view decides whether or not the user is trying to scroll. Read about the delaysContentTouches property. You'll probably want to leave that property set to YES. Beyond that, you really just need to learn to monitor touches -- you can drag a view by adjusting its position (by setting it's center, for example) as a touch moves around the screen. There's some sample code that may help you in Handling Swipe and Drag Gestures.
Related
Sample Project
This is a sample project that showing the issue. It's storyboard based, but method of building interface doesn't matter. It's UIViewController with UIScrollView for entire screen and 128 pts height view that is on top of this UIScrollView.
Inside scroll view there is an UIView that has 2000 pts height and UIButton in the center.
Initial State
After light scroll
At the bottom of UIScrollView
Link here: https://github.com/JakubMazur/UITestsDemo
Problem
I'm trying to tap this green button with XCUITest using app.buttons["Tap Me!"].tap()
XCUITest get identifiers from elements on screen for entire scroll view that works fine.
According to this reply on a thread on Apple Developer Forum written by Apple Framework Engineer I shouldn't scroll manually to get to the button and yes, this is partially true.
What is happening when code from (1) is executed is that button is scrolled just enough to be visible on screen but it's still not hittable, because other (purple view) is on top of UIScrollView
What is working
If I run a test written like this:
func testThatDoWorkButItsSlow() {
app.scrollViews.firstMatch.swipeUp()
app.buttons[buttonLabel].tap()
}
that is scrolling up and then looks for a button this will work, but it's slow and so inaccurate that is hardly usable.
What I cannot do
Disabling userInteractions on purple view. In real example I still need touches for this (purple) view.
Questions
Is there a way to use precise scrolling in XCTest for this case?
Or is there a way to set contentOffset scrollview to other value that will make this button more centered on a screen compared to action of tap()?
Or there is a way to fast scroll to the bottom (without animations) and maybe moving only up for each element?
My recommendation here would be to use the XCUICoordinate.press(forDuration:thenDragTo:) method to scroll.
https://developer.apple.com/documentation/xctest/xcuicoordinate/1615003-press
You can create a XCUICoordinate for the yellow view, then drag it slightly upwards to expose the button and make it hittable.
In most cases, the automatic scroll should work, but it seems like in this case a manual scroll/drag is necessary.
The UI Testing should replicate human interactions. You cannot expect from a human being to scroll "153px", you can just expect to "scroll until".
You can try something like :
while (!app.buttons["Tap Me!"].isHittable) {
app.swipeUp()
}
NB: You may also want to add a condition to leave the while loop if you can't find the button after a reasonable amount of attempts
I want to create a view in which I like to have animation such as the one present in iOS 8 Weather app.
I try to explain more what I have done. If anything is incorrect please guide me.
In the top I put a label for the temperature. (The big one)
Below that label, I put another label to show some text. In the Weather app, there is the horizontal scrollview showing the hourly forecast.
Next is the Table view.
What I want to achieve is that when I start scrolling, the first label disappear smoothly and the second one go to top of the screen and the TableView stretches to show more content.
When I scroll back to the top, I want the whole process to revert.
What is the best way to do this?
I've recently re-created the iOS8 Weather app's scrolling effect for an app I'm creating.
The complete code is too long to post here but for anyone who's interested, I've put it on GitHub. You can download and run the project to see how it looks. Improvements to the code are welcome:
UIScrollView with masked content.
It works like this:
You have one scrollview (the size of the screen), which contains a subview (the mask) which in turn has a subview (the content). We also add a large label to the top of the screen (in the Weather app, this displays the temperature).
Then you use the scrollViewDidScroll delegate method to keep the mask fixed to the screen as the user scrolls. You also use this method to stretch the mask upwards at first.
Fixing the mask to the screen means that the mask's subviews (our content) also becomes fixed. But we want it to scroll, so we do the opposite to the content of what we did to the mask (again, using scrollViewDidScroll).
We need the mask to actually behave as a mask, so we set clipsToBounds = YES on the mask.
Finally, we use the scrollview's offset during scroll to move and fade the big label at the top of the screen.
To make it behave exactly like the iOS8 Weather app, we need to also do the following:
Cancel any scroll touches that happen above the mask, i.e. over the large temperature display.
Ensure that the initial scroll that moves the temperature display is completed programatically if the user doesn't complete it.
Add a sideways-scrolling subview which is anchored to the top of the mask.
I haven't done these yet, though.
I'm using the great iOS control iCarousel's Wheel type and I want all of the buttons it contains to be usable / selectable at any time (i.e. I can tap any of them, no matter which one is currently at the top of the wheel). The user can still scroll the wheel as normal, but no matter which button they tap, it should register.
The current behavior seems inconsistent: if I tap one of the buttons directly next to the center one (to its left or right), that button moves into the center slot. Clicking one of the buttons two positions away 'sometimes' causes it to scroll to that letter, sometimes it's ignored. Any other buttons are always ignored.
Is this possible to set up, preferably without hugely modifying the class? I'm by no means an expert, but am learning every day :)
Thanks in advance.
Set carousel.centerItemWhenSelected = NO;
That will disable the behaviour where buttons other than the centre one are scrolled to the centre when you tap them.
As for the reason why some are not responding to taps at all, it is most likely because the frame of your carousel view is too small and the tap events are outside of the frame.
If you set carousel.clipsToBounds = YES; it will crop the carousel views to the frame as well so you'll be able to see exactly what size your carousel actually is.
I'm trying to create some sort of timeline view like in video editors: media elements in a row, which are UIView's. I can successfully drag these views inside currently visible part of scroll view using UIScrollView touch events like touchesBegan and touchesMoved. I want to scroll the scroll view once subview is dragged to one of the scroll view edges. The best I can think of now is to create a timer that will scroll the view while user holds the subview with the finger near scroll view edge.
There's a lot of questions here on the same topic, but I was unable to find one that covers scrolling.
Is there a good way to do this? Should I use gesture recognizers instead?
Thank you in advance.
Actually what you want IS a timed event. As soon, as the user is at the edge of the scrollview, you start a timer, which regularly increases the contentOffset. If you don't like your animation results (i guess you're using setContentOffset:animated:?), just try another timing and distance of animation.. I guess you have to try some different settings. What I would try first is 1px at a time. Perhaps every 0.3 second?
If that doesn't work you could also try another "extreme". Start a single animation, when the user reaches the edge, which animates the contentOffset until the end of the contentSize. But over a large timespan so the movement is slow. If the user stops dragging, or moves out of the edge, stop the animation at the current position. That would even be a solution without a timer, because the animation would be your timer itself.
I seriously doubt gesture recognizers would part of a good solution to this since they tend to be most helpful with discreet gestures.
I don't think I can improve on your general direction based on the assumption, implied above, that you are looking for continuous/gradual scrolling.
What I suggest instead is that you consider designing this to use a paged scrolling approach. When your user drags the object to the edge of the scrollview, cause the scrollview to move one page in that direction (by setting the contentOffset to move in that direction according to the bounds of the scrollview). When that even occurs, move the object slightly out of the "hot zone" at the edge of the scrollview so that the user is forced to explicitly express that they want to move another page, or something along those lines - that is, since the design approach depends on this "paging events" you need to implement some sort of gestural system for the user to keep paging.
I suppose you could use a timer in that same situation, so that if the user maintains the position and touch for another second, you would page again.
Backstory
I have an iPad app that needs to allow the user to navigate through groups of images. Each group is laid out in its own vertical UIScrollView (paged) so the user can swipe up and down down to see each image. Each of the group UIScrollViews is placed in a single (only one exists in the app) outer horizontal UIScrollView (also paged). This works great.... I can swipe up and down to view the images in a group and swipe left and right to go to the next or previous group.
Problem
The problem started when I needed to add zooming for each image. I accomplished this by placing each image inside its own UIScrollView. When the image is zoomed I can pan around the image and when I get to the top or the bottom of the zoomed image the group's vertical UIScrollView pages to the next or previous image as expected. Unfortunately the outer horizontal scrollview will not page to the next group when the image is zoomed and I pan to the leftmost or rightmost edge.
Is there a better(more correct) approach than triple nesting UIScrollViews or can I somehow forward touches to the outer horizontal scrollview?
Any help or suggestions would be greatly appreciated.
hope i'm not too late but I think I have a solution for your problem.
Here you can find an Xcode project demonstrating the scrollview setup you have, your problem and the proposed solution: https://bitbucket.org/reydan/threescrollviews
Basically the solution was to add 1 pixel to the contentSize.width of the vertical scrollviews. This forces the vertical scrollview to scroll a little when you pan to the edge of the zoomed image. It scrolls a little and then continues to the next vertical scrollview.
If you download the project you will see that I've created some scrollviews in the viewDidLoad method. There, I create one horizontal scrollview containing 3 vertical scrollviews, each containing 5 images. Each image is actually incapsulated in a scrollview to enable per-image zooming. In total... triple nested scrollviews.
I've also left some colored borders so that I can easily see how each scrollview scrolls.
the magenta = horizontal scrollview
the white = vertical scrollview
the blue = the image scrollview (the one that contains the image and allows for zooming)
the red = the UIImageView
You will see that I've tagged each image scrollview with value 10. This is used in the implementation of - (UIView*)viewForZoomingInScrollView:(UIScrollView *)scrollView delegate method where I return nil unless the event came from one of the image scrollviews.
If you have any questions about the project I made feel free to ask.
In the end, I would like to say that this browsing method is a little quirky for me as I sometimes scroll in the unwanted direction. Often I think I flick my finger vertically only to find the scrollview going left or right because it interpreted some tiny horizontal movement I had.
The problem I found with paging enabled for both horizontal and vertical movement is that the scrollviews are direction-locked, or so it seemed to me.
EDIT:
Today I've investigated the problem even more. These are my conclusions:
it's not a problem with zooming, it's a problem with having larger content in the innermost scrollview than the visible area(you can try this by zooming or simply initializing the content size larger than the bounds). This enables panning inside the inner-most scrollview and completely changes the behaviour of the touch events.
the bounce for a scrollview flag affects the behaviour of the panning(dragging) gesture when it reaches the edges of the content. If bounces=false then your panning gesture will stop at the edge, not forwarding the drag event up the chain (and thus not scrolling the parent scrollviews to show you other images). If bounces=true then, when you reach the edge and continue to drag the events will be forwarded to the parent scrollview and that scrollview will also be dragged. However, I've found that the dragging while bouncing reduces the distance dragged by aproximately 50%. This also happens in the Photos app.
if you start the dragging while the innermost scrollview is at the edge of the content then the scrollview is smart and will forward all events to the parent scrollview.
for some reason, triple nested scrollviews are problematic as the events are simply not forwarded between the topmost and middle scrollviews while panning inside the innermost scrollview. I have no idea why.
My solution with that +1 pixel to the content size, partially solves the problem.
EDIT 2013
Boy, these scrollviews are something out of this world :(
After more than a year of searching (just kidding... it was actually 2 days) I think I found a good elegant solution to the triple nested scrollviews.
I created a test project here:
https://github.com/reydanro/TripleNestedScrollViews
Inside the app, there is a switch which you can use to test with/without the fix.
The setup I am using in my app is a little different than this question. I have 1 vertical paged scrollview. Inside it, I have multiple horizontal paged scrollviews.
Inside some of the horizontal scrollviews I have another vertical paged scrollview.
Without the fix, once you get to the page with the inner-most scrollview you are pretty much stuck there as the vertical scrolling gestures are not forwarded to the outer-most scroll.
The fix is a custom UIGestureRecognizer that you need to add to the inner-most scrollviews. This recognizer follows touch events and if it detects a drag beyond the contentArea, then it will temporarily disable the rest of the scrollview's recognizers. This is the only method I discovered to make the scrollview forward the events up the chain
The gesture recognizer code is very rough with limited customization but should get the job done. At the moment I am focused on the app I develop, but will continue to update the repository.
PS: I haven't tested what happens with zoom but I see no reason why this method should not work (or be adapted to work).