Testing for an empty list in FitNesse .Net - fitnesse

FitNesse .Net (using the FIT test system, not SLIM) supports testing for lists of the form:
element1, element2, ..., elementN
This works well. However, I can't figure out how to test for an empty list.
Empty strings can be tested for with blank. What's the equivalent for a list?

Try this:
|configure|processor|add operator|parsequotedstring|
|check|myemptylist|""|

Please see here: https://github.com/imanushin/NetRunner/wiki/Collection-result
If there will be any collection on output NetRunner (and fitSharp) will write several red rows (e.g. test will fail).
For example, by using such functions I'm checking the error entries in the log: the expected entries count is empty list. However, any problematic row will be presented to me on the web page, which is very useful: I collects log results from the several files and story them in the test.

Related

How do you print different templates in netsuite?

I am trying to find the correct template and id to use for a hotprint of an advanced pdf template of an Item Fulfillment.
The hot print url is (with the id bolded) https://system.na3.netsuite.com/app/accounting/print/hotprint.nl?regular=T&sethotprinter=T&id=7600&label=Packing%20Slip&printtype=packingslip&trantype=itemship&orgtrantype=TrnfrOrd&auxtrans=7605
For some reason only certain id=# seems to affect the outcome and the ids I have got to work for two different templates don't match the Custom Transaction Forms ID or the Advanced pdf script id. (example most ids=template 1, while 168,4954, and seemingly random other ids=template 2) I am very confused on how netsuite resolves the hot print url as it normally doesn't include the template= part though I have seen others use it for invoice print urls.
The parameters at the end of the url (the stuff after the ?) are used by Netsuite to control settings used by the webpage which prints the PDFs for you.
In this case, &id=##### refers to the internal id of the document you are printing. You can see this by going to the document, right clicking, selecting inspect, and typing nlapiGetRecordId() into the console. When you click Print, you should see that same number after &id=#####.
&template=### refers to the template you are printing. If you go to Customization -> Forms -> Advanced PDF/HTML Templates, you'll notice a Script ID field in the table. If you substitute the correct Script ID in for the number in &template=###, you'll notice you generate the same PDF. This Script ID acts the same as the number that was previously there.
The reason you're seeing unusual results when you change those numbers is because you're mismatching a record with a template not built for it. So it won't print exactly right, but will sometimes execute anyways.
Anyways, this sort of parameter scheme is a similar scheme to how Suitelets and Restlets work, so in the future, you might experience this sort of thing again.
EDIT: For those reading this in the future, please read the comments.
To customize a packing slip and return form:
If you are printing packing slips and need some customization, you can use a custom invoice form when printing packing slips. For example, you can customize an invoice form to hide the fulfilled item tax rate and amount, and the order total. Then, when you print the packing slip using the custom form through mass print, choose the the packing slip shows the customized information.

Can't touch second element in array

I'm trying to touch a UITextField using Calabash. When I use query("UITextField")[x], where x is the number in the array of text fields that are on screen, I can correctly query for just one text field. However, when I use touch("UITextField")[x] it will always touch the first text field. This happens when using the console and when using cucumber to run the tests.
Here's relevant info about my setup:
xcode-select --print-path
/Applications/Xcode.app/Contents/Developer
xcodebuild -version
Xcode 7.2
Build version 7C68
calabash-ios version
0.16.4
Try
touch("UITextField index:x")
where x == your index.
Also, please update to calabash 0.17.0 :)
Explanation
The Calabash environment is composed of a client and a server. The server runs on the device/simulator as part of the app and receives commands/queries from the client. In this case, the client is the ruby interface through which you are interacting with the app.
The client is responsible for sending enough info to the server to select objects on which to perform the gestures. Once the gestures / queries have been performed, results are sent back to the client as json / hashes, which is what you see in the console. The distinction is important: the server performs the queries, the client does not.
By the time you are seeing the results of a query / gesture in the irb console, it has already been performed: the json that is returned simply represents the state of the views, not the actual views themselves.
So when you are running
touch("UITextField")[index]
This is actually equivalent to
touch_results = touch("UITextField")
touch_results[index]
In the first line, touch_results is receiving the json representation of the elements affected by performing touch on the results of querying for "UITextField", meaning that the touch event has already completed by the time you try to access the results with touch_results[index].
Another way to think about it is this: Given res = touch(query), the query is the part used to specify the actual views, and res is just json that represents the state of those views / results of a query or gesture.
In conclusion
When you need more specificity on a query, the specifiers need to go inside the query. E.g.,
touch("all UIScrollView UITextField marked:'some text' index:2")
(this will search for all UIScrollViews , find any UITextFields inside of them which contain text matching 'some text', and return the 3rd of such results).
For a full explanation of query language syntax, see the docs.

Parsing a CSV for Database Insertion when Formatted Incorrectly

I recently wrote a mailing platform for one of our employees to use. The system runs great, scales great, and is fun to use. However, it is currently inoperable due to a bug that I can't figure out how to fix (fairly inexperienced developer).
The process goes something like this...
Upload a CSV file to a specific FTP directory.
Go to the import_mailing_list page.
Choose a CSV file within the FTP directory.
Name and describe what the list contains.
Associate file headings with database columns.
Then, the back-end loops over each line of the file, associating the values with a heading, and importing these values into a database.
This all works wonderfully, except in a specific case, when a raw CSV is not correctly formatted. For example...
fname, lname, email
Bob, Schlumberger, bob#bob.com
Bobbette, Schlumberger
Another, Record, goeshere#email.com
As you can see, there is a missing comma on line two. This would cause an error when attempting to pull "valArray[3]" (or valArray[2], in the case of every language but mine).
I am looking for the most efficient solution to keep this error from happening. Perhaps I should check the array length, and compare it to the index we're going to attempt to pull, before pulling it. But to do this for each and every value seems inefficient. Anybody have another idea?
Our stack is ColdFusion 8/9 and MySQL 5.1. This is why I refer to the array index as [3].
There's ArrayIsDefined(array, elementIndex), or ArrayLen(array)
seems inefficient?
You gotta code what you need to code, forget about inefficiency. Get it right before you get it fast (when needed).
I suppose if you are looking for another way of doing this (instead of checking the array length each time, although that really doesn't sound that bad to me), you could wrap each line insert attempt in a try/catch block. If it fails, then stuff the failed row in a buffer (including the line number and error message) that you could then display to the user after the batch has completed, so they could see each of the failed lines and why they failed. This has the advantages of 1) not having to explicitly check the array length each time and 2) catching other errors that you might not have anticipated beforehand (maybe a value is too long for your field, for example).

Passing Parameters To report using url address

I'm developing some reports for Main Page in Dynamics Ax, however the problem i've got is connected with SSRS. Typical scenario i have report A and report B, i need to open report A when clicking on report B. Opening report itself is correct, but passing parameters is more tricky. After some research i got to the point when I want to run report A in browser using the adress
http://(server address)/Reports/Pages/Report.aspx?ItemPath=/Dynamics/Reports.VendorsOpenTransactionsCount.AutoDesign1&rs:Command=Render&VendOpenTrans_dataAreaID=dor&VendOpenTrans_p1=2011-07-21&VendOpenTrans_p2=2011-07-21
and then i get report displayed(main window) but non of the parameters are validated into proper textboxes, and changing the value of them doesn't have any impact.
can anyone here help me with that "challenge"
Actually, I believe the critical difference is whether you are passing parameters (via URL) to a report that is using database engine or the SSAS - the analytical engine as a data source.
If your data source is the analytical engine then your parameter should be given in the 'dimension format', rather than in the precise format, like &parmname=140, etc. Allow me to explain using specific example and using SSAS data source for this illustration (there is plenty of solutions available on the net for the database engine based solution, including Microsoft postings).
My server name is FRELASM.
So, I have SSAS data source called DealerSource (not visible here).
I have parameter defined in the parameter's section of the SSRS as: #DwDimDealerCorpDlrNbr
In SSAS I have the following dimension:
[Dw dim Dealer] that has attribute: [Corp Dlr Nbr] ==> giving: [Dw dim Dealer].[Corp Dlr nbr]
What I want is to show a report for a single dealer 'number' (but it is a text field, hence the leading zeros) equal to 00140. So, I am looking for Corporate dealer number=00140.
The parameter passing DOES NOT WORK if I use this [this would be find against database engine, but it does not work with SSAS).
What you need is this:
replace constant 00140 with [dimension].[attribute].[value]
do not use & character, rather replace it with: %26.
So, the working version is this.
Can you take a look at this page: http://msdn.microsoft.com/en-us/library/ms155391.aspx
It explains about when you can pass parameters via URL. Maybe your parameters are not set to Prompt for user input. HTH.

Hpricot CSS Class search

I am working on some code that scrapes a page for two css classes on a page. I am simply using the Hpricot search method for this as so:
webpage.search("body").search("div.first_class | div.second_class")
...for each item found i create an object and put it into an array, this works great except for one thing.
The search will go through the entire html page and add an object into an array every time it comes across '.first_class' and then it will go through the document again looking for '.second_class', resulting in the final array containing all of the searched items in the incorrect order in the array, i.e all of the '.first_class' objects, followed by all the '.second_class' objects.
Is there a way i can get this to search the document in one go and add an object into the array each time it comes across one of the specified classes, giving me an array of items that is in the order they are come across in on the page i am scraping?
Any help much appreciated. Thanks
See the section here on "Checking for a Few Attributes":
http://wiki.github.com/why/hpricot/hpricot-challenge
You should be able to stack the elements in the same way as you do attributes. This feature is apparently possible in Hpricot versions after 2006 Mar 17... An example with elements is:
doc.search("[#href][#type]")
Ok so it turned out i was mistaken and this didn't do anything different to what i previously had at all. However, i have come up with a solution, wether it is the most suitable or not i am not sure. It seems like a fairly straight forward for an annoying problem though.
I now perform the search for the two classes above as i mentioned above:
webpage.search("body").search("[#class~='first_class']|[#class~='second_class']")
However this still returned an array firstly containing all the divs with a class of 'first_class' followed by all divs with a class of 'second_class'. So to fix this and get an array of all the items as they appear in order on the page, i simply chain the 'add_class' method with my own custom class e.g. 'foo_bar'. This then allows me to perform another search on the page for all divs with just this one tag, thus returning an array of all the items i am after, in the order they appear on the page.
webpage.search("body").search("[#class~='first_class']|[#class~='second_class']").add_class("foo_bar")
webpage.search("body").search("[#class~='foo_bar']")
Thanks for the tip. I hadn't spotted that in the documentation and also found another page i hadnt seen either. I have fixed this with the following line:
webpage.search("body").search("[#class~='first_class']|[#class~='second_class']")
This now adds an object into the array each time it comes across one of the above classes in the document. Brilliant!

Resources