I have this .bib file for reference management while writing my thesis in LaTeX:
#article{garg2017patch,
title={Patch testing in patients with suspected cosmetic dermatitis: A retrospective study},
author={Garg, Taru and Agarwal, Soumya and Chander, Ram and Singh, Aashim and Yadav, Pravesh},
journal={Journal of Cosmetic Dermatology},
year={2017},
publisher={Wiley Online Library}
}
#article{hauso2008neuroendocrine,
title={Neuroendocrine tumor epidemiology},
author={Hauso, Oyvind and Gustafsson, Bjorn I and Kidd, Mark and Waldum, Helge L and Drozdov, Ignat and Chan, Anthony KC and Modlin, Irvin M},
journal={Cancer},
volume={113},
number={10},
pages={2655--2664},
year={2008},
publisher={Wiley Online Library}
}
#article{siperstein1997laparoscopic,
title={Laparoscopic thermal ablation of hepatic neuroendocrine tumor metastases},
author={Siperstein, Allan E and Rogers, Stanley J and Hansen, Paul D and Gitomirsky, Alexis},
journal={Surgery},
volume={122},
number={6},
pages={1147--1155},
year={1997},
publisher={Elsevier}
}
If anyone wants to know what bib file is, you can find it detailed here.
I'd like to parse this with Perl 6 to extract the key along with the title like this:
garg2017patch: Patch testing in patients with suspected cosmetic dermatitis: A retrospective study
hauso2008neuroendocrine: Neuroendocrine tumor epidemiology
siperstein1997laparoscopic: Laparoscopic thermal ablation of hepatic neuroendocrine tumor metastases
Can you please help me to do this, maybe in two ways:
Using basic Perl 6
Using a Perl 6 Grammar
TL;DR
A complete and detailed answer that does just exactly as #Suman asks.
An introductory general answer to "I want to parse X. Can anyone help?"
A one-liner in a shell
I'll start with terse code that's perfect for some scenarios[1], and which someone might write if they're familiar with shell and Raku basics and in a hurry:
> raku -e 'for slurp() ~~ m:g / "#article\{" (<-[,]>+) \, \s+
"title=\{" (<-[}]>+) \} / -> $/ { put "$0: $1\n" }' < derm.bib
This produces precisely the output you specified:
garg2017patch: Patch testing in patients with suspected cosmetic dermatitis: A retrospective study
hauso2008neuroendocrine: Neuroendocrine tumor epidemiology
siperstein1997laparoscopic: Laparoscopic thermal ablation of hepatic neuroendocrine tumor metastases
Same single statement, but in a script
Skipping shell escapes and adding:
Whitespace.
Comments.
► use tio.run to run the code below
for slurp() # "slurp" (read all of) stdin and then
~~ m :global # match it "globally" (all matches) against
/ '#article{' (<-[,]>+) ',' \s+ # a "nextgen regex" that uses (`(...)`) to
'title={' (<-[}]>+) '}' / # capture the article id and title and then
-> $/ { put "$0: $1\n" } # for each article, print "article id: title".
Don't worry if the above still seems like pure gobbledygook. Later sections explain the above while also introducing code that's more general, clean, and readable.[2]
Four statements instead of one
my \input = slurp;
my \pattern = rule { '#article{' ( <-[,]>+ ) ','
'title={' ( <-[}]>+ ) }
my \articles = input .match: pattern, :global;
for articles -> $/ { put "$0: $1\n" }
my declares a lexical variable. Raku supports sigils at the start of variable names. But it also allows devs to "slash them out" as I have done.
my \pattern ...
my \pattern = rule { '#article{' ( <-[,]>+ ) ','
'title={' ( <-[}]>+ ) }
I've switched the pattern syntax from / ... / in the original one-liner to rule { ... }. I did this to:
Eliminate the risk of pathological backtracking
Classic regexes risk pathological backtracking. That's fine if you can just kill a program that's gone wild, but click the link to read how bad it can get! 🤪 We don't need backtracking to match the .bib format.
Communicate that the pattern is a rule
If you write a good deal of pattern matching code, you'll frequently want to use rule { ... }. A rule eliminates any risk of the classic regex problem just described (pathological backtracking), and has another superpower. I'll cover both aspects below, after first introducing the adverbs corresponding to those superpowers.
Raku regexes/rules can be (often are) used with "adverbs". These are convenient shortcuts that modify how patterns are applied.
I've already used an adverb in the earlier versions of this code. The "global" adverb (specified using :global or its shorthand alias :g) directs the matching engine to consume all of the input, generating a list of as many matches as it contains, instead of returning just the first match.
While there are shorthand aliases for adverbs, some are used so repeatedly that it's a lot tidier to bundle them up into distinct rule declarators. That's why I've used rule. It bundles up two adverbs appropriate for matching many data formats like .bib files:
:ratchet (alias :r)
:sigspace (alias :s)
Ratcheting (:r / :ratchet) tells the compiler that when an "atom" (a sub-pattern in a rule that is treated as one unit) has matched, there can be no going back on that. If an atom further on in the pattern in the same rule fails, then the whole rule immediately fails.
This eliminates any risk of the "pathological backtracking" discussed earlier.
Significant space handling (:s / :sigspace) tells the compiler that an atom followed by literal spacing that is in the pattern indicates that a "token" boundary pattern, aka ws should be appended to the atom.
Thus this adverb deals with tokenizing. Did you spot that I'd dropped the \s+ from the pattern compared to the original one in the one-liner? That's because :sigspace, which use of rule implies, takes care of that automatically:
say 'x#y x # y' ~~ m:g:s /x\#y/; # (｢x#y｣) <-- only one match
say 'x#y x # y' ~~ m:g /x \# y/; # (｢x#y｣) <-- only one match
say 'x#y x # y' ~~ m:g:s /x \# y/; # (｢x#y｣ ｢x # y｣) <-- two matches
You might wonder why I've reverted to using / ... / to show these two examples. Turns out that while you can use rule { ... } with the .match method (described in the next section), you can't use rule with m. No problem; I just used :s instead to get the desired effect. (I didn't bother to use :r for ratcheting because it makes no difference for this pattern/input.)
To round out this dive into the difference between classic regexes (which can also be written regex { ... }) and rule rules, let me mention the other main option: token. The token declarator implies the :ratchet adverb, but not the :sigspace one. So it also eliminates the pathological backtracking risk of a regex (or / ... /) but, just like a regex, and unlike a rule, a token ignores whitespace used by a dev in writing out the rule's pattern.
my \articles = input .match: pattern, :global
This line uses the method form (.match) of the m routine used in the one-liner solution.
The result of a match when :global is used is a list of Match objects rather than just one. In this case we'll get three, corresponding to the three articles in the input file.
for articles -> $/ { put "$0: $1\n" }
This for statement successively binds a Match object corresponding to each of the three articles in your sample file to the symbol $/ inside the code block ({ ... }).
Per Raku doc on $/, "$/ is the match variable, so it usually contains objects of type Match.". It also provides some other conveniences; we take advantage of one of these conveniences related to numbered captures:
The pattern that was matched earlier contained two pairs of parentheses;
The overall Match object ($/) provides access to these two Positional captures via Positional subscripting (postfix []), so within the for's block, $/[0] and $/[1] provide access to the two Positional captures for each article;
Raku aliases $0 to $/[0] (and so on) for convenience, so most devs use the shorter syntax.
Interlude
This would be a good time to take a break. Maybe just a cuppa, or return here another day.
The last part of this answer builds up and thoroughly explains a grammar-based approach. Reading it may provide further insight into the solutions above and will show how to extend Raku's parsing to more complex scenarios.
But first...
A "boring" practical approach
I want to parse this with Raku. Can anyone help?
Raku may make writing parsers less tedious than with other tools. But less tedious is still tedious. And Raku parsing is currently slow.
In most cases, the practical answer when you want to parse well known formats and/or really big files is to find and use an existing parser. This might mean not using Raku at all, or using an existing Raku module, or using an existing non-Raku parser in Raku.
A suggested starting point is to search for the file format on modules.raku.org or raku.land. Look for a publicly shared parsing module already specifically packaged for Raku for the given file format. Then do some simple testing to see if you have a good solution.
At the time of writing there are no matches for 'bib'.
Even if you don't know C, there's almost certainly a 'bib' parsing C library already available that you can use. And it's likely to be the fastest solution. It's typically surprisingly easy to use an external library in your own Raku code, even if it's written in another programming language.
Using C libs is done using a feature called NativeCall. The doc I just linked may well be too much or too little, but please feel free to visit the freenode IRC channel #raku and ask for help. (Or post an SO question.) We're friendly folk. :)
If a C lib isn't right for a particular use case, then you can probably still use packages written in some other language such as Perl, Python, Ruby, Lua, etc. via their respective Inline::* language adapters.
The steps are:
Install a package (that's written in Perl, Python or whatever);
Make sure it runs on your system using a compiler of the language it's written for;
Install the appropriate Inline language adapter that lets Raku run packages in that other language;
Use the "foreign" package as if it were a Raku package containing exported Raku functions, classes, objects, values, etc.
(At least, that's the theory. Again, if you need help, please pop on the IRC channel or post an SO question.)
The Perl adapter is the most mature so I'll use that as an example. Let's say you use Perl's Text::BibTex packages and now wish to use Raku with that package. First, setup it up as it's supposed to be per its README. Then, in Raku, write something like:
use Text::BibTeX::BibFormat:from<Perl5>;
...
#blocks = $entry.format;
Explanation of these two lines:
The first line is how you tell Raku that you wish to load a Perl module.
(It won't work unless Inline::Perl5 is already installed and working. But it should be if you're using a popular Raku bundle. And if not, you should at least have the module installer zef so you can run zef install Inline::Perl5.)
The last line is just a mechanical Raku translation of the #blocks = $entry->format; line from the SYNOPSIS of the Perl package Text::BibTeX::BibFormat.
A Raku grammar / parser
OK. Enough "boring" practical advice. Let's now try have some fun creating a grammar based Raku parser good enough for the example from your question.
► use glot.io to run the code below
unit grammar bib;
rule TOP { <article>* }
rule article { '#article{' $<id>=<-[,]>+ ','
<kv-pairs>
'}'
}
rule kv-pairs { <kv-pair>* % ',' }
rule kv-pair { $<key>=\w* '={' ~ '}' $<value>=<-[}]>* }
With this grammar in place, we can now write something like:
die "Use CommaIDE?" unless bib .parsefile: 'derm.bib';
for $<article> -> $/ { put "$<id>: $<kv-pairs><kv-pair>[0]<value>\n" }
to generate exactly the same output as the previous solutions.
When a match or parse fails, by default Raku just returns Nil, which is, well, rather terse feedback.
There are several nice debugging options to figure out what's going on with a regex or grammar, but the best option by far is to use CommaIDE's Grammar-Live-View.
If you haven't already installed and used Comma, you're missing one of the best parts of using Raku. The features built in to the free version of Comma ("Community Edition") include outstanding grammar development / tracing / debugging tools.
Explanation of the 'bib' grammar
unit grammar bib;
The unit declarator is used at the start of a source file to tell Raku that the rest of the file declares a named package of code of a particular type.
The grammar keyword specifies a grammar. A grammar is like a class, but contains named "rules" -- not just named methods, but also named regexs, tokens, and rules. A grammar also inherits a bunch of general purpose rules from a base grammar.
rule TOP {
Unless you specify otherwise, parsing methods (.parse and .parsefile) that are called on a grammar start by calling the grammar's rule named TOP (declared with a rule, token, regex, or method declarator).
As a, er, rule of thumb, if you don't know if you should be using a rule, regex, token, or method for some bit of parsing, use a token. (Unlike regex patterns, tokens don't risk pathological backtracking.)
But I've used a rule. Like token patterns, rules also avoid the pathological backtracking risk. But, in addition rules interpret some whitespace in the pattern to be significant, in a natural manner. (See this SO answer for precise details.)
rules are typically appropriate towards the top of the parse tree. (Tokens are typically appropriate towards the leaves.)
rule TOP { <article>* }
The space at the end of the rule (between the * and pattern closing }) means the grammar will match any amount of whitespace at the end of the input.
<article> invokes another named rule in this grammar.
Because it looks like one should allow for any number of articles per bib file, I added a * (zero or more quantifier) at the end of <article>*.
rule article { '#article{' $<id>=<-[,]>+ ','
<kv-pairs>
'}'
}
If you compare this article pattern with the ones I wrote for the earlier Raku rules based solutions, you'll see various changes:
Rule in original one-liner
Rule in this grammar
Kept pattern as simple as possible.
Introduced <kv-pairs> and closing }
No attempt to echo layout of your input.
Visually echoes your input.
<[...]> is the Raku syntax for a character class, like[...] in traditional regex syntax. It's more powerful, but for now all you need to know is that the - in <-[,]> indicates negation, i.e. the same as the ^ in the [^,] syntax of ye olde regex. So <-[,]>+ attempts a match of one or more characters, none of which are ,.
$<id>=<-[,]>+ tells Raku to attempt to match the quantified "atom" on the right of the = (i.e. the <-[,]>+ bit) and store the results at the key <id> within the current match object. The latter will be hung from a branch of the parse tree; we'll get to precisely where later.
rule kv-pairs { <kv-pair>* % ',' }
This pattern illustrates one of several convenient Raku regex features. It declares you want to match zero or more kv-pairs separated by commas.
(In more detail, the % regex infix operator requires that matches of the quantified atom on its left are separated by the atom on its right.)
rule kv-pair { $<key>=\w* '={' ~ '}' $<value>=<-[}]>* }
The new bit here is '={' ~ '}'. This is another convenient regex feature. The regex Tilde operator parses a delimited structure (in this case one with a ={ opener and } closer) with the bit between the delimiters matching the quantified regex atom on the right of the closer. This confers several benefits but the main one is that error messages can be clearer.
I could have used the ~ approach in the /.../ regex in the one-liner, and vice-versa. But I wanted this grammar solution to continue the progression toward illustrating "better practice" idioms.
Constructing / deconstructing the parse tree
for $<article> { put "$<id>: $<kv-pairs><kv-pair>[0]<value>\n" }`
$<article>, $<id> etc. refer to named match objects that are stored somewhere in the "parse tree". But how did they get there? And exactly where is "there"?
Returning to the top of the grammar:
rule TOP {
If a .parse is successful, a single 'TOP' level match object is returned. (After a parse is complete the variable $/ is also bound to that top match object.) During parsing a tree will have been formed by hanging other match objects off this top match object, and then others hung off those, and so on.
Addition of match objects to a parse tree is done by adding either a single generated match object, or a list of them, to either a Positional (numbered) or Associative (named) capture of a "parent" match object. This process is explained below.
rule TOP { <article>* }
<article> invokes a match of the rule named article. An invocation of the rule <article> has two effects:
Raku tries to match the rule.
If it matches, Raku captures that match by generating a corresponding match object and adding it to the parse tree under the key <article> of the parent match object. (In this case the parent is the top match object.)
If the successfully matched pattern had been specified as just <article>, rather than as <article>*, then only one match would have been attempted, and only one value, a single match object, would have been generated and added under the key <article>.
But the pattern was <article>*, not merely <article>. So Raku attempts to match the article rule as many times as it can. If it matches at all, then a list of one or more match objects is stored as the value of the <article> key. (See my answer to "How do I access the captures within a match?" for a more detailed explanation.)
$<article> is short for $/<article>. It refers to the value stored under the <article> key of the current match object (which is stored in $/). In this case that value is a list of 3 match objects corresponding to the 3 articles in the input.
rule article { '#article{' $<id>=<-[,]>+ ','
Just as the top match object has several match objects hung off of it (the three captures of article matches that are stored under the top match object's <article> key), so too do each of those three article match objects have their own "child" match objects hanging off of them.
To see how that works, let's consider just the first of the three article match objects, the one corresponding to the text that starts "#article{garg2017patch,...". The article rule matches this article. As it's doing that matching, the $<id>=<-[,]>+ part tells Raku to store the match object corresponding to the id part of the article ("garg2017patch") under that article match object's <id> key.
Hopefully this is enough (quite possibly way too much!) and I can at last exhaustively (exhaustingly?) explain the last line of code, which, once again, was:
for $<article> -> $/ { put "$<id>: $<kv-pairs><kv-pair>[0]<value>\n" }`
At the level of the for, the variable $/ refers to the top of the parse tree generated by the parse that just completed. Thus $<article>, which is shorthand for $/<article>, refers to the list of three article match objects.
The for then iterates over that list, binding $/ within the lexical scope of the -> $/ { ... } block to each of those 3 article match objects in turn.
The $<id> bit is shorthand for $/<id>, which inside the block refers to the <id> key within the article match object that $/ has been bound to. In other words, $<id> inside the block is equivalent to $<article><id> outside the block.
The $<kv-pairs><kv-pair>[0]<value> follows the same scheme, albeit with more levels and a positional child (the [0]) in the midst of all the key (named/ associative) children.
(Note that there was no need for the article pattern to include a $<kv-pairs>=<kv-pairs> because Raku just presumes a pattern of the form <foo> should store its results under the key <foo>. If you wish to disable that, write a pattern with a non-alpha character as the first symbol. For example, use <.foo> if you want to have exactly the same matching effect as <foo> but just not store the matched input in the parse tree.)
Phew!
When the automatically generated parse tree isn't what you want
As if all the above were not enough, I need to mention one more thing.
The parse tree strongly reflects the tree structure of the grammar's rules calling one another from the top rule down to leaf rules. But the resulting structure is sometimes inconvenient.
Often one still wants a tree, but a simpler one, or perhaps some non-tree data structure.
The primary mechanism for generating exactly what you want from a parse, when the automatic results aren't suitable, is make. (This can be used in code blocks inside rules or factored out into Action classes that are separate from grammars.)
In turn, the primary use case for make is to generate a sparse tree of nodes hanging off the parse tree, such as an AST.
Footnotes
[1] Basic Raku is good for exploratory programming, spikes, one-offs, PoCs and other scenarios where the emphasis is on quickly producing working code that can be refactored later if need be.
[2] Raku's regexes/rules scale up to arbitrary parsing, as introduced in the latter half of this answer. This contrasts with past generations of regex which could not.[3]
[3] That said, ZA̡͊͠͝LGΌ ISͮ̂҉̯͈͕̹̘̱ TO͇̹̺ͅƝ̴ȳ̳ TH̘Ë͖́̉ ͠P̯͍̭O̚N̐Y̡ remains a great and relevant read. Not because Raku rules can't parse (X)HTML. In principle they can. But for a task as monumental as correctly handling full arbitrary in-the-wild XHTML I would strongly recommend you use an existing parser written expressly for that purpose. And this applies generally for existing formats; it's best not to reinvent the wheel. But the good news with Raku rules is that if you need to write a full parser, not just a bunch of regexes, you can do so, and it need not involve going insane!
I was entirely amazed by how Coq's parser is implemented. e.g.
https://softwarefoundations.cis.upenn.edu/lf-current/Imp.html#lab347
It's so crazy that the parser seems ok to take any lexeme by giving notation command and subsequent parser is able to parse any expression as it is. So what it means is the grammar must be context sensitive. But this is so flexible that it absolutely goes beyond my comprehension.
Any pointers on how this kind of parser is theoretically feasible? How should it work? Any materials or knowledge would work. I just try to learn about this type of parser in general. Thanks.
Please do not ask me to read Coq's source myself. I want to check the idea in general but not a specific implementation.
Indeed, this notation system is very powerful and it was probably one of the reasons of Coq's success. In practice, this is a source of much complication in the source code. I think that #ejgallego should be able to tell you more about it but here is a quick explanation:
At the beginning, Coq's documents were evaluated sentence by sentence (sentences are separated by dots) by coqtop. Some commands can define notations and these modify the parsing rules when they are evaluated. Thus, later sentences are evaluated with a slightly different parser.
Since version 8.5, there is also a mechanism (the STM) to evaluate a document fully (many sentences in parallel) but there is some special mechanism for handling these notation commands (basically you have to wait for these to be evaluated before you can continue parsing and evaluating the rest of the document).
Thus, contrary to a normal programming language, where the compiler will take a document, pass it through the lexer, then the parser (parse the full document in one go), and then have an AST to give to the typer or other later stages, in Coq each command is parsed and evaluated separately. Thus, there is no need to resort to complex contextual grammars...
I'll drop my two cents to complement #Zimmi48's excellent answer.
Coq indeed features an extensible parser, which TTBOMK is mainly the work of Hugo Herbelin, built on the CAMLP4/CAMLP5 extensible parsing system by Daniel de Rauglaudre. Both are the canonical sources for information about the parser, I'll try to summarize what I know but note indeed that my experience with the system is short.
The CAMLPX system basically supports any LL1 grammar. Coq exposes to the user the whole set of grammar rules, allowing the user to redefine them. This is the base mechanism on which extensible grammars are built. Notations are compiled into parsing rules in the Metasyntax module, and unfolded in a latter post-processing phase. And that really is AFAICT.
The system itself hasn't changed much in the whole 8.x series, #Zimmi48's comments are more related to the internal processing of commands after parsing. I recently learned that Coq v7 had an even more powerful system for modifying the parser.
In words of Hugo Herbelin "the art of extensible parsing is a delicate one" and indeed it is, but Coq's achieved a pretty great implementation of it.
I am trying to create a simple script for a resource API. I have a resource API mainly creates game resources in a structured manner. What I want is dealing with this API without creating c++ programs each time I want a resource. So we (me and my instructor from uni) decided to create a simple script to create/edit resource files without compiling every time. There are also some other irrelevant factors that I need a command line interface rather than a GUI program.
Anyway, here is script sample:
<path>.<command> -<options>
/Graphics[3].add "blabla.png"
I didn't design this script language, the owner of API did. The part before '.' as you can guess is the path and part after '.' is actual command and some options, flags etc. As a first step, I tried to create grammar of left part because I thought I could use it while searching info about lexical analyzers and parser. The problem is I am inexperienced when it comes to parsing and programming languages and I am not sure if it's correct or not. Here is some more examples and grammar of left side.
dir -> '/' | '/' path
path -> object '/' path | object
object -> number | string '[' number ']'
Notation if this grammar can be a mess, I don't know. There is 5 different possibilities, they are:
String
"String"
Number
String[Number]
"String"[Number]
It has to start with '/' symbol and if it's the only symbol, I will accept it as Root.
Now my problem is how can I lexically analyze this script? Is there a special method? What should my lexical analyzer do and do not(I read some lexical analysers also do syntactic analysis up to a point). Do you think grammar, etc. is technically appropriate? What kind of parsing method I should use(Recursive Descent, LL etc.)? I am trying to make it technically appropriate piece of work. It's not commercial so I have time thus I can learn lexical analysis and parsing better. I don't want to use a parser library.
What should my lexical analyzer do and not do?
It should:
recognize tokens
ignore ignorable whitespace and comments (if there are such things)
optionally, keep track of source location in order to produce meaningful error messages.
It should not attempt to parse the input, although that will be very tempting with such a simple language.
From what I can see, you have the following tokens:
punctuation: /, ., linear-white-space, new-line
numbers
unquoted strings (often called "atoms" or "ids")
quoted strings (possibly the same token type as unquoted strings)
I'm not sure what the syntax for -options is, but that might include more possibilities.
Choosing to return linear-white-space (that is, a sequence consisting only of tabs and spaces) as a token is somewhat questionable; it complicates the grammar considerably, particularly since there are probably places where white-space is ignorable, such as the beginning and end of a line. But I have the intuition that you do not want to allow whitespace inside of a path and that you plan to require it between the command name and its arguments. That is, you want to prohibit:
/left /right[3] .whimper "hello, world"
/left/right[3].whimper"hello, world"
But maybe I'm wrong. Maybe you're happy to accept both. That would be simpler, because if you accept both, then you can just ignore linear-whitespace altogether.
By the way, experience has shown that using new-line to separate commands can be awkward; sooner or later you will need to break a command into two lines in order to avoid having to buy an extra monitor to see the entire line. The convention (used by bash and the C preprocessor, amongst others) of putting a \ as the last character on a line to be continued is possible, but can lead to annoying bugs (like having an invisible space following the \ and thus preventing it from really continuing the line).
From here down is 100% personal opinion, offered for free. So take it for what its worth.
I am trying to make it technically appropriate piece of work. It's not commercial so I have time thus I can learn lexical analysis and parsing better. I don't want to use a parser library.
There is a contradiction here, in my opinion. Or perhaps two contradictions.
A technically appropriate piece of work would use standard tools; at least a lexical generator and probably a parser generator. It would do that because, properly used, the lexical and grammatical descriptions provided to the tools document precisely the actual language, and the tools guarantee that the desired language is what is actually recognized. Writing ad hoc code, even simple lexical recognizers and recursive descent parsers, for all that it can be elegant, is less self-documenting, less maintainable, and provides fewer guarantees of correctness. Consequently, best practice is "use standard tools".
Secondly, I disagree with your instructor (if I understand their proposal correctly, based on your comments) that writing ad hoc lexers and parsers aids in understanding lexical and parsing theory. In fact, it may be counterproductive. Bottom-up parsing, which is incredibly elegant both theoretically and practically, is almost impossible to write by hand and totally impossible to read. Consequently, many programmers prefer to use recursive-descent or Pratt parsers, because they understand the code. However, such parsers are not as powerful as a bottom-up parser (particularly GLR or Earley parsers, which are fully general), and their use leads to unnecessary grammatical compromises.
You don't need to write a regular expression library to understand regular expressions. The libraries abstract away the awkward implementation details (and there are lots of them, and they really are awkward) and let you concentrate on the essence of creating and using regular expressions.
In the same way, you do not need to write a compiler in order to understand how to program in C. After you have a good basis in C, you can improve your understanding (maybe) by understanding how it translates into machine code, but unless you plan a career in compiler writing, knowing the details of obscure optimization algorithms are not going to make you a better programmer. Or, at least, they're not first on your agenda.
Similarly, once you really understand regular expressions, you might find writing a library interesting. Or not -- you might find it incredibly frustrating and give up after a couple of months of hard work. Either way, you will appreciate existing libraries more. But learn to use the existing libraries first.
And the same with parser generators. If you want to learn how to translate an idea for a programming language into something precise and implementable, learn how to use a parser generator. Only after you have mastered the theory of parsing should you even think of focusing on low-level implementations.
I'm writing a tool with it's own built-in language similar to Python. I want to make indentation meaningful in the syntax (so that tabs and spaces at line beginning would represent nesting of commands).
What is the best way to do this?
I've written recursive-descent and finite automata parsers before.
The current CPython's parser seems to be generated using something called ASDL.
Regarding the indentation you're asking for, it's done using special lexer tokens called INDENT and DEDENT. To replicate that, just implement those tokens in your lexer (that is pretty easy if you use a stack to store the starting columns of previous indented lines), and then plug them into your grammar as usual (like any other keyword or operator token).
Check out the python compiler and in particular compiler.parse.
I'd suggest ANTLR for any lexer/parser generation ( http://www.antlr.org ).
Also, this website ( http://erezsh.wordpress.com/2008/07/12/python-parsing-1-lexing/ ) has some more information, in particular:
Python’s indentation cannot be solved with a DFA. (I’m still perplexed at whether it can even be solved with a context-free grammar).
PyPy produced an interesting post about lexing Python (they intend to solve it using post-processing the lexer output)
CPython’s tokenizer is written in C. It’s ad-hoc, hand-written, and
complex. It is the only official implementation of Python lexing that
I know of.