I need to write selected language into the file in installation folder in order to localize application.
I know how to display select language page, but I want to write id of selected language inside the file.
In section which is executed during MUI_PAGE_INSTFILES i have this:
FileOpen $0 "$DESKTOP\xy.txt" w #Just testing, will go inside install directory later
FileWrite $0 "$LANGUAGE"
FileClose $0
but it's not working. When $LANGUAGE is replaced by other string it creates file and places the string inside it.
Any suggestion please? Thank you.
Related
I'm using SPSS 25 syntax to open and process a set of datafiles. I would like these syntax files to be as portable as possible. For that reason, I want the user to be able to select the file locations at runtime without having to recode the syntax itself.
I'm running Windows 10, although hopefully that doesn't matter. I do have the Python plugin for SPSS, although ideally this would be a base SPSS syntax solution.
In SPSS right now, I'm doing this:
GET
FILE='C:\Users\xkcd\studies\project\rawdata'+
'\reallyraw\veryraw.sav'
PASSWORD='CorrectHorseBatteryStaple'.
DATASET NAME Demo WINDOW=FRONT.
In R, I would do this:
message("Where is the veryraw.sav file?")
demo<-fread(file.choose())
Ideally, the user would, at runtime, select the individual files one at a time.
Less ideally, the user would select a folder in which all of the files, with known names.
I could use FILE HANDLE so that the user would only have to hardcode a few folder locations, but that's less than ideal - I really would rather that the user isn't editing the syntax at all.
Thanks in advance!
Following up on the idea of a fully automated process - the following code will work assuming there is a specific file name you need to run your code on, and only one copy exists in the folder you are searching. This is possible to run on drive C: directly, but will take much less time to run if you can narrow down the path:
* this will create a text file that has the path of the required file.
HOST COMMAND=['dir /s /b "C:\Users\somename\*required file name.sav" > C:\Users\somename\tempname.sps'].
* now to read the name and put in in a handle.
DATA LIST file = "C:\Users\somename\tempname.sps" fixed / pth 1-500 (a).
exe.
string cmd(a500).
compute cmd=concat("file handle myfile / name='", rtrim(pth), "'.").
write out="C:\Users\somename\tempname.sps" /cmd.
exe.
* inserting the new syntax will activate the handle.
insert file = "C:\Users\somename\tempname.sps".
Now you can use the handle myfile in the syntax, e.g:
get file=myfile.
I am actually converting all DDS files to use MSGID instead of plain text. I can now change the display language of the application just by choosing the right library with the MSGF in French, English, ...
But for the commands, it seems that CRTCMD needs a language file at compile time (with PMTFILE) and uses theses strings to generate the command. I could eventually delete the MSGF but the command will display the texts.
What I want to achieve is using the same *CMD object and be able to change the language when needed at run time.
**Edit: assuming a currently supported release, 6.1 or higher...
I think you want to use *DYNAMIC on the CRTCMD PMTFILE() parameter
*DYNAMIC
When the command is prompted, prompt text messages
will be dynamically retrieved from the message file
specified for this parameter using the message
identifiers stored in the *CMD object when the command
was created. The message identifier specified for the
PROMPT or CHOICE parameter on a CMD, PARM, QUAL, or
ELEM command definition statement must be found in the prompt text
message file when the command is being prompted.
So something like
CRTCMD CMD(MYLIB/MYCMD) PGM(MYLIB/MYPGM) SRCFILE(MYLIB/QCMDSRC)
SRCMBR(MYCMD) PMTFILE(*LIBL/MYMSGF *DYNAMIC)
say i have this line of code :
Object.Property.field;
Object.Property:FunctionName();
in all my sublime languages if i was to double click "Property" on either line, it would select just that word.
For some reason my lua/lua love2d syntax highlighting selects the whole line up to the ":"
How can I change this behavior, so it will only select the single word?
The reason this is occurring is because of a somewhat strange addition to the Lua Love plugin, which I assume you're using. You're using Sublime 2, so select Preferences -> Browse Packages... to open up your Packages folder, then open the Lua Love subfolder. There is a file called completions.py, which has this content:
#completions.py
import sublime
import sublime_plugin
import re
class LoveCompletions(sublime_plugin.EventListener):
ST = 3000 if sublime.version() == '' else int(sublime.version())
def on_query_completions(self, view, prefix, locations):
if self.ST < 3000 and ("lua" in view.scope_name(locations[0])):
seps = view.settings().get("word_separators")
seps = seps.replace('.', '')
view.settings().set("word_separators", seps)
Even if you don't know Python, the logic is pretty easy to follow. It sets the variable ST to Sublime's version, which is 3000+ if you're using ST3 (current build is 3061), and is 2221 (I think) for ST2. It then sets up an event listener (the process is always running in the background) checking to see if the Sublime version is less than 3000 (you're using ST2) and you have lua in your current scope (basically, your file is source.lua or source.lua.love, if you're using the plugin's language definition). If both of those are true, it removes the . character from your "word_separators" setting, which is defined in Preferences -> Settings-Default and can be overridden in Preferences -> Settings-User.
The word_separators setting controls what characters are considered to be word separators when double-clicking to select a word. Its default value is ./\\()\"'-:,.;<>~!##$%^&*|+=[]{}`~? so, for example, if you double-click on the foo part of foo-bar Sublime will only select foo, but if you double-click on the foo part of foo_bar Sublime will select the whole thing (since - is in word_separators). . is in word_separators by default, so double-clicking on foo in foo.bar will only select foo, which is expected behavior for most people, I would assume. However, this cute little plugin removes . from word_separators in Sublime Text 2, so in your case clicking on Property selects everything from the beginning of the "word" (the whitespace before Object) to the next word separator - the :, in the case of your second example.
OK, so we know what the problem is, how do we fix it? First, while you're in Packages/Lua Love, just delete completions.py altogether. There's no harm in doing so, and in fact it's actually causing harm by being there. Make sure you restart Sublime after deleting the file. Next, open Preferences -> Settings-User and add . back into the word_separators list, anywhere between the beginning and ending double-quotes. Save that file, go back to your source code, and double-clicking should once again behave normally.
Good luck!
EDIT
I submitted this pull request to delete the completions.py file from the plugin's Github repo, and it was just merged, so hopefully users in the future won't have to deal with this :)
I need to add a new path (sumatraPDF) on my PATH variable.
I don't know why it does not work...
I think everything is right but when I try to execute sumatrapdf.exe from CMD it cannot find the program.
This is what I did:
The path is correct, I checked it 1000 times.
The idea is use LaTeX with sublimetext and when I save a .text file sumatra has to open and show to me the result. If I want that I have to add the path of SumatraPDF... but it does not work.
I think you are editing something in the windows registry but that has no effect on the path.
Try this:
How to Add, Remove or Edit Environment variables in Windows 7
the variable of interest is the PATH
also you can type on the command line:
Set PATH=%PATH%;(your new path);
Another method that worked for me on Windows 7 that did not require administrative privileges:
Click on the Start menu, search for "environment," click "Edit environment variables for your account."
In the window that opens, select "PATH" under "User variables for username" and click the "Edit..." button. Add your new path to the end of the existing Path, separated by a semi-colon (%PATH%;C:\Python27;...;C:\NewPath). Click OK on all the windows, open a new CMD window, and test the new variable.
I founded the problem:
Just insert the folder without the executable file.
so Instead of:
C:\Program Files (x86)\SumatraPDF\SumatraPDF.exe
you have to write this:
C:\Program Files (x86)\SumatraPDF\
In answer to the OP:
The PATH environment variable specifies which folders Windows will search in, in order to find such files as executable programs or DLLs. To make your Windows installation find your program, you specify the folder that the program resides in, NOT the program file itself!
So, if you want Windows to look for executables (or other desired files) in the folder:
C:\PHP
because, for example, you want to install PHP manually, and choose that folder into which to install PHP, then you add the entry:
C:\PHP
to your PATH environment variable, NOT an entry such as "C:\PHP\php.exe".
Once you've added the folder entry to your PATH environment variable, Windows will search that folder, and will execute ANY named executable file you specify, if that file happens to reside in that folder, just the same as with all the other existing PATH entries.
Before editing your PATH variable, though, protect yourself against foul ups in advance. Copy the existing value of the PATH variable to a Notepad file, and save it as a backup. If you make a mistake editing PATH, you can simply revert to the previous version with ease if you take this step.
Once you've done that, append your desired path entries to the text (again, I suggest you do this in Notepad so you can see what you're doing - the Windows 7 text box is a pain to read if you have even slight vision impairment), then paste that text into the Windows text box, and click OK.
Your PATH environment variable is a text string, consisting of a list of folder paths, each entry separated by semicolons. An example has already been given by someone else above, such as:
C:\Program Files; C:\Winnt; C:\Winnt\System32
Your exact version may vary depending upon your system.
So, to add "C:\PHP" to the above, you change it to read as follows:
C:\Program Files; C:\Winnt; C:\Winnt\System32; C:\PHP
Then you copy & paste that text into the windows dialogue box, click OK, and you should now have a new PATH variable, ready to roll. If your changes don't take effect immediately, you can always restart the computer.
The path is a list of directories where the command prompt will look for executable files, if it can't find it in the current directory. The OP seems to be trying to add the actual executable, when it just needs to specify the path where the executable is.
Try this in cmd:
cd address_of_sumatrapdf.exe_file && sumatrapdf.exe
Where you should put the address of your .exe file instead of adress_of_sumatrapdf.exe_file.
I'm trying to insert the content of a file inside a job description. My build generates a file and I can find it easily with the following URL: http:/[my-domain]job/[my-job]/lastBuild/artifact/[my-file]. In my case, this is a text file and I would like to display it in the job description. I can easily insert a link to this file with HTML but how can I insert the content of this file ?
What is your Jenkins running on? Windows or Linux?
The Project Description Setter plugin is indeed the way to go, but you need to display the content of your file in the build log first, before the plugin will pick it up.
Like Christopher said, you don't need a job URL to access the file that you have in your workspace.
For Linux, put the following into your shell execute step:
echo -n "[DESC] " && cat myfile
For Windows, use this:
echo|set /p="[DESC] " & type myfile
This will print the content of file and prefix it with "[DESC]". We need this prefix (it can be anything you want) to identify this line to the Description Setter plugin
In the job configuration, under Set build description, type:
\[DESC\] (.*)
One note: only the first line of the file will be printed in description
The Project Description Setter plugin can do this.