Custom UITableViewCell's subviews added in code using auto layout works (verified). However the whole point of doing this was to not have to calculate the height of each tableview cell and the delegate method heightForRowAtIndexPath expects a height while drawing the tableview.
How can I figure out this height based on content using the auto-layout (visual format language based addition in code already added and working) and return it to this heightForRowAtIndexPath?
Also I'm I can't really do this on a background thread (or can I?) and therefore if I have a UITableView using this backed by a list of say 1000 records, this will take forever, is that right?
Autolayout in this case just means that you don't need to calculate the frame sizes of your subviews within each cell. It's got nothing to do with the heightForRowAtIndexPath method - this is used by the table view to define the cell's frame, which will then inform the layout of the subviews.
Using Autolayout to determine the heights would likely be pretty slow, and you can't do it on a background thread. If you have 1000 rows then I'd consider a hierarchical structure instead of a single table as that will be pretty tedious to scroll through. You could also consider calculating the heights at the point of setting or creating the data.
You may be able to set up an offscreen view using your constraints, populate it with your data for each item, then record and cache the height. However you'd have to do this at the data end rather than in the height method, as it would be far too slow.
Related
I am trying to do something like loading up different type of cells with custom height in a uitableview. The tableview cells are subclassed and consists of labels with the respective constraints. Each cell is having a dynamic height.
Now even before my table reloads the data, I am calculating the height that is required for the resizing of the cells and caching it in my model class so that I dont have to calculate the height when the data is rendered on the device.
To calculate height i did use the tutorial from Ray Wenderlich and I am having the right set of heights applies to the objects.
Now the problem comes. Whenever I am dequeueing the cells there is a
kind of a small jerk that gives me an indication that my cell is
dequeued while scrolling.
How can i make these movement smooth so that there is no jerk while scrolling the view ?
The height is getting assigned in and does get the value as per the current type of data getting loaded.
estimatedRowForIndexPath
Also I am calling layoutIfNeeded from my cellForAtindexPath
Suggestions are most welcome.
It's very hard to say without seeing your code in cellForRowAtIndexPath, and without seeing your cells and their respective code. Here are some general questions I would investigate:
What is the content of the cells and how complex is the view hierarchy in the cell?
Even though you are supplying the correct estimated height, an autolayout pass still needs to happen, and a complex view hierarchy will take time to resolve
Does the cell contain images?
Images that need to be decompressed from a file (UIImage imageNamed:) can be intensive and cause scrolling issues, check images are not bigger than they need to be. If needed, bump this work onto a background thread.
Are you calling a complex method to configure the cell for display in cellForRowAtIndexPath?
Look at the work actually being done in cellForRowAtIndexPath, is there a complex method being triggered in you cell subclass or view model?
Are you adding and removing views to the cell view hierarchy in cellForRowAtIndexPath?
If views are being added, removed, created, inflated from a xib, constrained etc during the cell config, this could slow things down. Try to do only what is strictly needed. Check if there is any code being run internally in the cell subclass during cellForRowAtIndexPath that could be moved to cells initWith... or awakeFromNib methods (ie code that could just run once when the cell is created, rather than every time the cell is displayed)
Also run the Instruments time profiler, see if that offers any more clues
I am having a problem where my collection view scrolling becomes very choppy/laggy as I get more and more cells. The screen contains a list of messages and comments for the messages, so every single view is dynamically sized. I have a bunch of custom layout attributes which I apply to handle laying and sizing everything.
I apply the custom attributes to the cells by overriding applyLayoutAttributes: and then calculate all the subviews frames from those.
I already cache the calculated sizes of cells but it is not enough.
I assume that there are some techniques people use to address this problem, like caching layout attributes, or somehow preventing the need to layout a cells subviews everytime cellForRow is called?
I assume this is a common problem since it is a problem I have faced with literally every table I make with dynamic content? I would appreciate any ideas :)
P.S. Rasterizing the cells doesn't help.
To implement a rather intricate design of a screen in an iOS app, I have a UITableView nested inside of a UIScrollView.
To keep the logic simple, I implemented a method on the UITableView that calculates its entire height, and i use the result of that method and set a constraint on the nested table view, so that the scrolling logic can be solely on the UIScrollView to deal with. (I forward methods such as scrollRectToVisible from the UITableView to the UIScrollView)
While this works great with small data sets, I have recently discovered the the reuse capabilities of the UITableView are not used, because the framework believes the entire UITableView to be visible when I set that height constraint. A simple log method in the cellForRowAtIndexPath method shows all cells get calculated at once.
My question is, is there anything I can do where I would be able to tell the nested UITableView how much of it is actually visible on screen, and to only compute those visible cells?
I basically need to override whatever part of UITableView that is responsible for calculating what cells should be visible on screen.
The table view will think of itself as filling its whole frame with cells. If you limit the height it will limit the cell count visible. Are you using the deque with reuse identifier method (if not see below)
How can I recycle UITableViewCell objects created from a XIB?
I am trying to create a table view, in which the table view cells contain a scroll view. The scroll view can contain one or two pages of one image view each. Note that the scroll view will only scroll horizontally, so it will not interfere with the Table View's scroll view that will scroll vertically. Depending on the content, I want the scroll view to be updated with these image views, and set the scroll view content size according to responses I receive from a server, instructing the application what images to display.
In order to do that, I initially thought of creating a custom UITableViewCell subclass, and do all my initialisation of the views inside that.
However, I am just thinking about performance and memory. I know that iOS automatically deallocates already seen views and cells, when it needs to, and that it reuses the old cells when it tries to display something new (by using a reuse identifier). However, each cell will contain a scroll view with content size and subviews that will change in each cell. I want to use a reuse identifier to ensure maximum performance.
Can anyone point me in a way in which I can set up the reuse of a cell like this, and change the contents of each scroll view successfully?
Thanks.
you can make the reuseIdentifier dynamic
e.g. "cell_with_1","cell_with_2","cell_with_x" where x is the number of images
that way equal cells can be reused when sensible (e.g. when the number of images in the view is the same): 'worst case' is no reusing and a tad overhead for trying but in general I'd deem it beneficial :)
*the allocation deallocation and the basic adding of the subviews is expensive.. changing frames or images seems reasonable to me
In iOS6, I cannot seem to get the width of the cell in cellForRowAtIndexPath for the grouped table style. Logging either the frame or the bounds for either the cell or its contentview returns 320 - even on iPad. I need to determine the cell width programmatically for any device as I need to calculate text sizes. Any advice in getting the correct cell width for a grouped tableview in cellForRowAtIndexpath would be appreciated please
The method you're using is the wrong place to calculate any kind of view-related constraints. The -tableView:cellForRowAtIndexPath: method is part of the table view's data source, not its delegate. You cannot rely on the frame or anything else here to be meaningful, it's meant as the place to configure the cell's /data/.
If you need to make calculations to view frames and such, and you're not using a custom subclass of UITableViewCell (i.e., you're just adding views to a default instance of UITableViewCell or configuring stock views), you would set up any frame-related / view specific attributes in the /delegate/ callback -tableView:willDisplayCell:forRowAtIndexPath: method. This is the place to configure any of the visible/view-related properties of your cell, and you will now have accurate layout information for the cell (its bounds will be correct, any layout/configuration of internal views will be complete, etc.).
If you have a custom subclass already, you can either do your view related property configuration in the delegate callback above, or you can do it in UIView's -layoutSubviews method, depending on your exact needs. For more information, see the documentation for -tableView:willDisplayCell:forRowAtIndexPath:.