When I run the project and add the app in simulator for the first time, everything is okay. But when I run it again, Xcode prompts this message as a pop-up window at the end of compilation:
This app could not be installed at this time.
I already checked the relevant question, and tried all the advised ways to solve this issue; checking mentioned logs, cleaning project, restarting simulator, changing it, erasing all content and settings in it. Nothing works. I must erase the app and recompile it every time to open the app. Did you get the same message before? Is there any way to detect problem and resolve it? Btw, I use Xcode 9.2 at High Sierra.
This error pop-up may come up for different reasons. There is no specific reason to see it for now. In my case, a JSON file that I added to Bundle in order to provide mock data triggered this issue. This file was containing a Turkish letter in one of the keys. After I fix it, the pop-up is gone. Interestingly, earlier simulators (<=9.1) work properly if JSON file contains Turkish letter but 9.2 simulators cannot tolerate it.
Worked for me when I rebuild the project after deleting the derived data folder.
I think I may have found a solution. This all started a short time after I let Xcode update my project settings. Specifically on my CocoaPod-Subproject. I removed the pods and reinstalled them and now I am no longer getting the pop-up.
So, it started as a simple test, where I had to delete my app from my iPhone (iOS4.3) just to check how the app behaves on a first run. (I am developing to support down to iOS4.3).
After the deletion, I wasn't able to run the app on my iPhone for some reason. The "Active Scheme" would show iOS Device, although I could manually select my own device from the list, the project wouldn't set my device by default. XCode would drop a message from the top saying:
Could not launch “project1” No such file or directory
(/Users/portal/Library/Developer/Xcode/DerivedData/project1-
cfjhjgezzcapwoadaivpptyywptu/Build/Products/Debug-iphoneos/project1.app/project
I went through this SO post (EDIT: Therefore, restarting XCode, iPhone doing clean project, hard resetting my iPhone) but this didn't change anything, except I can now delete the Derived data in Organizer.
I have a working backup at hand though. Thing is it is a bit outdated as I made many changes to the project. I can run the backed up project, and it seems sane as good.
Now my question is how can I merge the files back into the sane project? The XCode project itself has changed a bit, frameworks were put in as well as some settings.
I tried to simply copy the changed files into the old project, but all I get is a SIGABRT upon the first run. I did a FileMerge look, and saw that for some reason my projectAppDelegate.m is non existant in the PBXBuild section of the .xcodeproj file. which I didn't touch. seems like a mess here.
How can I merge the new project to the old one correctly?
I've got an app that I created that I'm trying to test on an older iphone 3g. I've used this phone many times for testing but this new app for some reason will not accept the build.
I've done some searching and found that I need to charge the architecture from "armv7" to "armv6", I did this in both the project and target. After doing that I get the following error when trying to build to the device (construction is the name of the app)
Could not launch "construction"
No such file or directory (/Users/Matthew/Library/Developer/Xcode/DerivedData/Construction-cqtujdbjhpvbkrehtfzwvuhvxdrs/Build/Products/Debug-iphoneos/Construction.app/Construction)
But I can build in the simulator at it works fine... any idea?
thank you so much - clearing UIRequiredDeviceCapabilities in Info.plist would have never appeared to me.
None of these solutions worked for me. I'm using XCode 4.5 and ML. What I ended up doing (and still need to test thoroughly), was to re-create my project, started clean and then moved all sources and libraries to the new project and chose my provisioning profile for this new project. In the copy, I also manually copied the contents of the old Info.plist file and pasted them onto the newly Info.plist replacing them all.
In my case, I'm using CorePlot and that library needs armv7 (according to linker), so I can't just go armv6.
What I'm trying to figure out is when (cheap) XCode changed some settings to not run as a debugger on the device. I'm guessing something in the 'project.pbxproj' file. Otherwise I can't explain why the newly created project works and the old one doesn't.
I know this solution might not work for everyone, as in my case, as would lose all svn changes.
I'll post any progress on this.
My next step is to add CorePlot and let the project build it and not use the prebuilt one.
None of these worked for me either. But this DID work...
DO THE USUAL THINGS:
I cleared the build directory (cmd-k),
cleared the DerivedData (see prefs|Locations),
deleted the app from my iPhone 5,
unplugged the iPhone, and
restarted Xcode.
AND LASTLY DO THIS:
Open Xcode Organizer. Click on Devices | (your device name) | Applications. And finally, delete your application from here (aka. delete the app from your device, AGAIN).
Build and run...
Sorry I answered my own question! I figure I should leave this up in case anyone else has the same problem... I didn't update the plist setting to armv6 before... I did have to delete the armv7 in the plist to make it work
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 6 years ago.
Improve this question
Xcode has stopped being able to run my app, it started directly after I deleted it from the device and attempted to re-install by rerunning it in Xcode (something I've done hundreds of times before).
It says
"Could not launch XXX.app"
"No such file or directory (/Users/Mylaptop/Library/Developer/Xcode/DerivedData/MyApp-ekxcbebfpzkahtfkujyqkcwprzia/Build/Products/Debug-iphoneos/MyApps.app/MyApp)."
I've rebooted the phone, relaunched Xcode, cleaned everything, rebuilt everything. This error message won't go away.
This is with Xcode 4.5 which I've been using since it became available, if I revert to 4.3.2 then Xcode says "Finished running app" but it doesn't actually do anything - the app is neither installed nor run.
I'm completely stuck - unable to run anything on the device anymore.
Any suggestions?
That is really annoying. This error happens in a number of different situations. Sometimes restarting the Xcode, fixes the problem. If not, follow these steps:
Disconnect your device.
Delete the app from your device.
Quit Xcode (Do not just simply close the window, quit it)
Delete derived data folder (~/Library/Developer/Xcode/DerivedData/-gbrvhlvwmpiobxdujegtghggrffp - or something like that)
Now start Xcode once again, connect device and run the project. It should work fine.
from DhilipSiva blog
Try deleting "Required device capabilities" in the -Info.plist file.
You can't require armv7 on a 3G, and you can't require armv6 on any newer device, so just delete this attribute entirely.
I found the answer. The iOS deployment target's version was not the same as my device's OS version.
First tried some of the above with info.plists and deleting derived data, clean, etc.
My solution: quit XCode, reopen project. Go to derived data in Finder. Deleted data for all projects (was all trashable, but I would try deleting your troubled projectdata first). And then it worked again. Deleting derived data from XCode didn't work.
The following resolved my problem... my app worked for me in debug/release, then I built a few ad-hoc archives and debug/release builds stopped working.
Symptoms:
invalid entitlements errors when launching from Xcode to device (play with entitlements...)
immediate abort with no error (finished running ) when running simulator
could not launch ... directory blabla.../build/product/debug-iphoneos/... not found when launching from Xcode to device.
Eventually after trying to benefit from everyone else's pain I found in Targets [AppName]:
Build Settings
Build Locations
Build Products Path build
should be
Build Products Path build/Products
No idea how this got set incorrectly.
This must be hard-coded somewhere in Xcode/Springboard because 'Products' appears in both Xcode and in the Device console.
This is Xcode 4.5.1.
I solved this problem by
renaming a directory above my XCode project
Changing the name of the project in XCode fixed it for me.
In XCode, under the Project Navigator, click the project name, and it should let you rename it just like a file in Finder. Deleting derived data did not help.
I built my XCode Project with CMake and somehow it (or my stupid self) deleted or emptied the property "Executable file" in the info.plist. I set it back to ${EXECUTABLE_NAME} and it worked again.
Took me really alot of time working through all the suggestions and fixes until I finally found that problem.
Hope this will help some one struggling with the same problem
Edit:
It was in some way CMake messing up my plist file. I created my own Info.plist and used it the following way:
SET_TARGET_PROPERTIES( MyApp PROPERTIES MACOSX_BUNDLE_INFO_PLIST ${CMAKE_CURRENT_LIST_DIR}/MyApp.plist )
Inside my plist I had this entry:
<key>CFBundleExecutable</key> <string>${EXECUTABLE_NAME}</string>
Unfortunately CMake still seems to parse that file and replaced ${EXECUTABLE_NAME} with an empty string since its the CMake variable syntax. My quick work around is the following:
SET( EXECUTABLE_NAME "\${EXECUTABLE_NAME}" )
Now it works like a charm.
I am probably alone with exactly this problem, but who knows.
I had the same problem, but in my case I had a wrong requirement in my info.plist (require gyroscope for an iPhone 3Gs)
I tried to run my project on a different system other than that on which it was developed. I was getting “Could not launch xxx.app: .. No such file..”.
Removed the app from the device and then deleted the derived data from organizer in xcode for the app.
Organizer-->Projects-->Derived DAta-->Delete
My problem was resolved.
You need to set the deployment target LOWER than your device's version
For me, the solution was just to use the correct (non-distribution) provisioning profile.
I was defaulting to always using my ad hoc provisioning profile, but then I changed to using my developer profile (team profile) and that solved things. I went ahead and cleaned out the Derived Data directory to be safe but I don't know for certain if it is required.
XCode used to have a warning that told you to use the correct provisioning profile but that error message seems to have gone away in XCode 4.5.
I've had this problem by a very strange solution.
My problem was slightly different as I have 2 Developer certificates in Keychain. We have two developer accounts (lets say AD and BD).
1) I did change Bundle identifier from com.BD.game to com.AD.game
2) Device on which I had problems was only signed in AD provisioning profiles.
3) I was unable to debug the game on iPad - although the device had valid provisioning profiles, I had valid certificates, I restarted Mac, device, reinstalled Xcode ... nothing helped.
Do what i did today was examining the project.pbxproj file for any strange entries.
What I found was that Xcode was using proper provisioning profile, but signed the ipa/app with wrong certificate.
"CODE_SIGN_IDENTITY[sdk=iphoneos*]" = "iPhone Developer: **BD** (XX******)";
After I manualy corrected the name and id; everything works like charm.
I got the same error. In my case I was set deployment target as 6.1 and trying to run an iOS 5.1 iPad. When I changed my deployment target to 4.3, issue solved.
Still having the problem . Try this
Disconnect your device.
Delete the app from your device.
Quit xcode.
Now start Xcode, connect device and run the project. It should work fine.
For me (using IOS 7 and Xcode 5), the error went away right after I did "Add to Member Center" with my device in the Organizer.
I would like to mention that the easiest way to open the DerivedData folder in Finder is the following:
Open the Organizer.
Click on "Projects".
Select your problematic project.
Next to the path of the DerivedData, click on the little right-arrow button.
Deleting the contents of the DerivedData folder worked for me. Instead of using the "Delete..." button, you should have more success deleting the files manually through Finder.
Go to: your project Target - > Info and from CustoM iOS Target Properties remove the Required Device Capabilities.
In my case that were armv7 and armv7s.
After that the app was built successfully on my iPhone 4.
This is how it looks after i removed both of requirements
For me, I forgot that I had "telephony" in the "Required device capabilities" in the info.plist. Removed that, and it finally worked on my iPad.
For me restarting of Xcode, cleaning DerivedData and restaring device wasn't enough in most cases, until I had figured out that iTunes was also running, and after quitting iTunes everything worked fine!
So my steps now are simple:
1. Quit Xcode.
2. If iTunes is running, quit iTunes.
3. Reopen project.
No need to remove app from the device, clean project or restart/disconnect device.
I think that's because Xcode and iTunes use some common libraries (as you know, Xcode Installer always asks to quit iTunes on installing iOS SDK).
I had this problem and tried a number of the suggestions which didn't work for me - then I found the one about removing the "Required device capabilities" in the -Info.plist file (which for me included location-services & gps)
That worked!
I then re-added them and it still worked.. go figure.
This was xCode 4.6.1 & my app is developer with Phonegap/Cordova
I tried all the above and yet it still wouldn't run. I fixed the problem by changing the derived build location. File>Project settings>"derived data location" change to project-relative. Or you could just make sure the default path has permission to read/write.
My issue seemed to be picking picking Portrait (top home button) as Item 0 in Supported Interface orientations in my plist. Removing that or moving it down seemed to fix my problem. Go figure.
I had this problem too for a Universal app with Xcode 4.5 on my iPhone ONLY, where I had two debug devices:
iPhone 4 iOS 5.1.1
iPad 1 iOS 5.1.1
The Info.plist had an empty entry under "Required device capabilities"
I know that I did not enter this empty 'Item 0'. The app loads on the iPhone
since I removed the empty item. I did not encounter
this problem on any of several earlier versions of Xcode,
This means that Xcode 4.5 handles this 'inserted' item differently
for the two devices I use. I have been wrong before, but this does seem
like a bug in Xcode 4.5.
This may seem obvious but you must also set your deployment target to the operating system that your device is running.
So if you upgrade to iOS 6, it will set your deployment target to iOS 6. You'll need to deploy to 5.1 if the device you are testing on still runs 5.1.
My issue finally got resolved by checking to make sure that the productName attribute in the /* Begin PBXNativeTarget section */ section of my project.pbxproj file matched the name attribute.
Once editing it so that they were the same, Xcode finally runs the app on my device correctly!
Thanks to Max Weisel for helping me! :D
Deleting the derived data folder did not help for me.
Using Xcode 4.4.2 the only solution was to open Organizer and delete old expired and extraneous provisioning profiles on the iDevice. Then everything worked perfectly again.
This may be a red herring, but I experienced these problems when I added custom launch images before deleting the default ones. Deleting the default launch and custom images and then adding back in the custom ones fixed it for me. I'm working with iOS 6 and Xcode 4.5.2
There seems to be a few different things that can cause this very helpful error message.
For me, it was down to an incorrect "Required device capabilities" in the Info.plist. I had added a blank array item by mistake (on top of the the architecture, armv7).
Deleted the blank array item and now everything is fine!
I had this problem and nothing really helped except:
My problem started after changing the contents of my info.plist and no reverting had helped.
What solved it for me was:
Create a vanilla info.plist in a brand new project
replace the old info.plist with the new
renaming it (like app_info.plist)
Set Build Settings/Packaging/INFOPLIST_FILE to be the new one.
Make all the changes you need for your project
Hope that helps. I tried everything else suggested here and this was the only solution for me.
Facing same problem but now problem is solved, i deleted Executable file info.plist. I set it back to ${EXECUTABLE_NAME} and it worked again.. :)
In my case i just set 777 permission directly to xxx.app folder to all files and work!
I have trouble uploading my application to app store. When I try to archive my project for validation i get an error:
warning: iPhone/iPod Touch: BMELogo.png: icon dimensions (0 x 0) don't
meet the size requirements. The icon file must be 57x57 pixels, in
.png format (-19014) Unable to validate your application. - (null)
I have checked and re-checked my icon for both size and type. My icon is 57x57 and a PNG.
Do any of you know what to do?
in advance thanks :)
This is a weird error, but it could be similar to what happens when apps on the phone don't match what you see in the simulator. Here's a few things to try:
As Damo mentioned, this is most likely a capitalization issue. Make sure that the filename as specified in the plist matches the case of what's on disk. Devices (and the app store) are case-sensitive, but your Mac is not. If it works in the simulator but not on device, you probably have a capitalization problem.
You might need to Clean (from the Build menu) the project and rebuild. Sometimes XCode just gets confused, especially if you've been moving or renaming images. Quitting & restarting XCode might help, too.
Nuke the site from orbit -- manually delete all of the project's output files. Sometimes XCode keeps old versions of image files around packaged somewhere hidden that cleaning doesn't get rid of.
Start over from scratch. Choose a different name, one where you're sure there's no legacy object file lingering about.
Also, you might want to make sure that you are using the latest version of the Application Loader, you can download the latest by logging into iTunes Connect and clicking on Manage Your Applications, the download is at the bottom of the page.
After you download the installer, close down Xcode, then run the Application Loader installer, then relaunch Xcode, load your project, do a clean on the project, and then archive and try the validation.
I had this error too. You need to reinstall Application Loader which you can get from here https://itunesconnect.apple.com/apploader/ApplicationLoader_2.5.1.dmg