I already searched and read a lot of tutorial how to parse Ksoap2 response using C# ASP.net Web Service. It's very confusing what should I pick because the others say that "it's wrong this is the right way" and the others say "no that was also wrong" Now I really don't know what I'm going to use to parse my web service response.
this is my response.
anyType{NewDataSet=anyType{Table=anyType{id=1; autoID=aa; name=bb; company=bb; address=bb; position=bb; email=bb; conTactMobile=bb; contactTelephone=bb; companyLogo=bb; photo=bb; }; }; }
Can anybody suggest what is the best way to parse this kind of response.
any thoughts will be Highly appreciated.
Well Here are Some steps you can follow to parse your response:
SoapObject response = (SoapObject) envelope.getResponse();
After that extract first property i.e:
SoapObject NewDataSet = (SoapObject) response.getProperty(0);
SoapObject table = NewDataSet.getProperty(0);
get each property in table as,for ex:-
String iD=table.getProperty(0);
String autoID=table.getProperty(1);
This is one of the solution(I cant say if it is the best one or not),see is it solves your problem..
Related
I have recently starting doing things with a raspberry pi zero W and wanted to be able to call a number from it.
Unfortunately it seems very hard to use the normal Twilio library because the pi uses MicroPython so I have to use the raw API.
I also gathered that the API uses the content type x-www-form-urlencoded which urequests seems to have a hard time interacting with.
This is my code so far
url = f"https://api.twilio.com/2010-04-01/Accounts/{TWILIO_USER}/Calls.json"
def call() -> None:
body = {"To": CALLING_NUMBER, "From": CALLER_NUMBER}
response = urequests.post(url, json=body, auth=(TWILIO_USER, TWILIO_KEY))
print("Status Code", response.status_code)
print("JSON Response ", response.json())
however I get the error
{'code': 21201, 'more_info': 'https://www.twilio.com/docs/errors/21201', 'message': "No 'To' number is specified", 'status': 400}
I have tried a ton of stuff like url encoding the body myself, using it as the parameter for data, json.dumpsing it, nothing seemed to work. Any help would be greatly appreciated.
Please remember I am limited by the picos standard libraries.
It seems I was close. All I had to do was copy paste urllib's urlencode and use it on body, then it ended up working.
I am trying to do an upload via api, when the data is small eg:100 rows the upload works fine and I get the response as expected but when the upload is large, eg:1M rows, the test fails with Time-out-exception. How can I handle this? Is Thread.sleep() a recommended method?
You can use like this. if it is not working, please provide code.
RequestConfig requestConfig = RequestConfig.custom().setConnectTimeout(5000).setConnectionRequestTimeout(5000)
.setSocketTimeout(5000).build();
HttpClientConfig httpClientFactory = HttpClientConfig.httpClientConfig()
.httpClientFactory(() -> HttpClientBuilder.create().setDefaultRequestConfig(requestConfig).build());
RestAssured.config = RestAssured.config().httpClient(httpClientFactory);
I'm trying to write a http rest client for my webservice and i need to send some PATCH requestes with data in the body.
I'm using the JUST library for sending requests ( https://github.com/JustHTTP/Just )
My express application just doesn't see the request.
Here's some code (i'm testing in playground, and everything went fine with other kind of requests like put, post...)
headers = ["accept":"application/json","content-type":"application/json","authorization":"key"] //key is ok
var data = ["id":3, "quantity":6]
var r = Just.patch("http://api.marketcloud.it/v0/carts/1233", headers:headers, data:data) //1233 is a cart Id
print(r)
print(r.json)
The method Just.patch returns an HTTPResult Object.
this says 'OPTIONS http://api.marketcloud.it/v0/carts/13234 200'
Also this object should contain a json, but it's 'nil'.
On the server-side, my express applications doesn't receive the request (it just logs an 'OPTION', but nothing else).
Could this be a playground-related problem? Or a just-related one?
Thanks for any suggestion
I managed to contact the library's author via twitter and he fixed the bug and answered me in less than 24h!
Here's the new release of the library.
https://github.com/JustHTTP/Just/releases
I've had success creating objects with POST and Content-Type application/xml
I've also had success querying using Content-Type application/x-www-form-urlencoded with a blank request body which returns all of the object type depending on which URI I specify.
I can also get the same to work with something like PageNum=1&ResultsPerPage=1 in the request body and I have figured out how to incorporate that into the signature so I get a valid response.
However no matter how I format it, I cannot get anything other than a 401 response when I try to use a filter (something basic like Filter=FAMILYNAME :EQUALS: Doe). I've read over the OAuth Core 1.0 Revision A specifications on how all parameter names and values are escaped using the [RFC3986] percent-encoding. However I feel like I'm missing a step or formatting incorrectly. I've seen inconsistent information in my searching through Intuit's forums on what exactly is the proper format.
Any help on this would be greatly appreciated. I've been struggling with this for a good week now.
The response I get when trying to use a filter is:
HTTP Status 401 - message=Exception authenticating OAuth; errorCode=003200; statusCode=401
----Update----
I'm am seeing the same error when I try to use filters with the New IPP Developer Tools - IPP API Explorer. I'm using the IDS V2 QBO API Explorer. I'm able to use that tool to do a retrieve all Post and the response shows all of my customers, but when I try to use a filter I get :
Server Error
401 - Unauthorized: Access is denied due to invalid credentials.
You do not have permission to view this directory or page using the credentials that you supplied.
Any Ideas? If I'm getting the same error from the API Explorer tool, it makes me think the problem is something else entirely.
----Final Update----
I have finally had success with filters and I believe I have figure out what my problem was. I was always suspicious that I was able to get queries with pagination like "PageNum=1&ResultsPerPage=1" to work, but could not get something like "Filter=FAMILYNAME :EQUALS: Doe". I suspected there problem was with the white space in the filter format. What threw me off tracking this down earlier was that I could not get the filters to work in the IDS V2 QBO API Explorer. That made me suspect there was something else going on. I decided to ignore the API Explorer all together and focus on why I could get it to work the one way but no the other.
I believe my problem came down to improper encoding of the Filter's value in the signature. That explains the 401 invalid signature errors I was getting.
"Filter=Name :EQUALS: Doe" becomes "Filter=Name%20%3AEQUALS%20%3ADoe" after normalization.
Percent-Encoding that should give "Filter%3DName%2520%253AEQUALS%2520%253ADoe".
In essence you have to "double" encode the blank space and the colons, but not the equal sign. I tried many permutations of doing the encoding, but believe my mistake was that I was either not "double" encoding, or when I was double encoding I was including the '=' sign. Either way breaks your signature. Thanks for everyone's input.
I believe my problem came down to improper encoding of the Filter's value in the signature. That explains the 401 invalid signature errors I was getting.
I used an online tool to take me through the steps in properly signing an Oauth request. While going through those steps I realized my problem was with the steps where you normalize the request parameters and then percent-encode them. I was including the '=' of the filter in the normalization step, which breaks your signature. The tool I used can be found at:
http://hueniverse.com/2008/10/beginners-guide-to-oauth-part-iv-signing-requests/
Thanks for everyone's input.
Do you get a 401 with the same request in the API Explorer?
http://ippblog.intuit.com/blog/2013/01/new-ipp-developer-tool-api-explorer.html
Also, are you using the static base URL or retrieving it at runtime?
https://ipp.developer.intuit.com/0010_Intuit_Partner_Platform/0050_Data_Services/0400_QuickBooks_Online/0100_Calling_Data_Services/0010_Getting_the_Base_URL
If you are using the static base URL, try switching to the runtime base URL to see if you still get the error.
peterl answered one of my questions on here that may also answer yours. I had been trying to put the Filters in the body when they should have gone into the header. Here was peterl's code sample for getting all unpaid invoices (open balance greater than 0.00) for a particular customer.
http://pastebin.com/raw.php?i=7VUB6whp
public List<Intuit.Ipp.Data.Qbo.Invoice> GetQboUnpaidInvoices(DataServices dataServices, int startPage, int resultsPerPage, IdType CustomerId)
{
StringBuilder requestXML = new StringBuilder();
StringBuilder responseXML = new StringBuilder();
var requestBody = String.Format("PageNum={0}&ResultsPerPage={1}&Filter=OpenBalance :GreaterThan: 0.00 :AND: CustomerId :EQUALS: {2}", startPage, resultsPerPage, CustomerId.Value);
HttpWebRequest httpWebRequest = WebRequest.Create(dataServices.ServiceContext.BaseUrl + "invoices/v2/" + dataServices.ServiceContext.RealmId) as HttpWebRequest;
httpWebRequest.Method = "POST";
httpWebRequest.ContentType = "application/x-www-form-urlencoded";
httpWebRequest.Headers.Add("Authorization", GetDevDefinedOAuthHeader(httpWebRequest, requestBody));
requestXML.Append(requestBody);
UTF8Encoding encoding = new UTF8Encoding();
byte[] content = encoding.GetBytes(requestXML.ToString());
using (var stream = httpWebRequest.GetRequestStream())
{
stream.Write(content, 0, content.Length);
}
HttpWebResponse httpWebResponse = httpWebRequest.GetResponse() as HttpWebResponse;
using (Stream data = httpWebResponse.GetResponseStream())
{
Intuit.Ipp.Data.Qbo.SearchResults searchResults = (Intuit.Ipp.Data.Qbo.SearchResults)dataServices.ServiceContext.Serializer.Deserialize<Intuit.Ipp.Data.Qbo.SearchResults>(new StreamReader(data).ReadToEnd());
return ((Intuit.Ipp.Data.Qbo.Invoices)searchResults.CdmCollections).Invoice.ToList();
}
}
protected string GetDevDefinedOAuthHeader(HttpWebRequest webRequest, string requestBody)
{
OAuthConsumerContext consumerContext = new OAuthConsumerContext
{
ConsumerKey = consumerKey,
ConsumerSecret = consumerSecret,
SignatureMethod = SignatureMethod.HmacSha1,
UseHeaderForOAuthParameters = true
};
consumerContext.UseHeaderForOAuthParameters = true;
//URIs not used - we already have Oauth tokens
OAuthSession oSession = new OAuthSession(consumerContext, "https://www.example.com",
"https://www.example.com",
"https://www.example.com");
oSession.AccessToken = new TokenBase
{
Token = accessToken,
ConsumerKey = consumerKey,
TokenSecret = accessTokenSecret
};
IConsumerRequest consumerRequest = oSession.Request();
consumerRequest = ConsumerRequestExtensions.ForMethod(consumerRequest, webRequest.Method);
consumerRequest = ConsumerRequestExtensions.ForUri(consumerRequest, webRequest.RequestUri);
if (webRequest.Headers.Count > 0)
{
ConsumerRequestExtensions.AlterContext(consumerRequest, context => context.Headers = webRequest.Headers);
if (webRequest.Headers[HttpRequestHeader.ContentType] == "application/x-www-form-urlencoded")
{
Dictionary<string, string> formParameters = new Dictionary<string, string>();
foreach (string formParameter in requestBody.Split('&'))
{
formParameters.Add(formParameter.Split('=')[0], formParameter.Split('=')[1]);
}
consumerRequest = consumerRequest.WithFormParameters(formParameters);
}
}
consumerRequest = consumerRequest.SignWithToken();
return consumerRequest.Context.GenerateOAuthParametersForHeader();
}
You can also see my original Question Here on StackOverflow: Query for All Invoices With Open Balances using QuickBooks Online (QBO) Intuit Partner Platform (IPP) DevKit.
I am trying to do a simple Salesforce-Asana integration. I have many functions working, but I am having trouble with adding a tag to a workspace. Since I can't find documentation on the addTag method, I'm sort of guessing at what is required.
If I post the following JSON to https://app.asana.com/api/1.0/workspaces/WORKSPACEID/tasks:
{"data":{"name":"MyTagName","notes":"Test Notes"}}
The tag gets created in Asana, but with blank notes and name fields. If I try to get a bit more fancy and post:
{"data":{"name":"MyTagName","notes":"Test Notes","followers":[{"id":"MY_USER_ID"}]}}
I receive:
{"errors":[{"message":"Invalid field: {\"data\":{\"name\":\"MyTagName\",\"notes\":\"Test Notes\",\"followers\":[{\"id\":\"MY_USER_ID\"}]}}"}]}
I'm thinking the backslashes may mean that my request is being modified by the post, though debug output shows a properly formatted json string before the post.
Sample Code:
JSONGenerator jsongen = JSON.createGenerator(false);
jsongen.writeStartObject();
jsongen.writeFieldName('data');
jsongen.writeStartObject();
jsongen.writeStringField('name', 'MyTagName');
jsongen.writeStringField('notes', 'Test Notes');
jsongen.writeFieldName('followers');
jsongen.writeStartArray();
jsongen.writeStartObject();
jsongen.writeStringField('id', 'MY_USER_ID');
jsongen.writeEndObject();
jsongen.writeEndArray();
jsongen.writeEndObject();
jsongen.writeEndObject();
String requestbody = jsongen.getAsString();
HttpRequest req = new HttpRequest();
req.setEndpoint('https://app.asana.com/api/1.0/workspaces/WORKSPACEID/tags');
req.setMethod('POST');
//===Auth header created here - working fine===
req.setBody(requestbody);
Http http = new Http();
HTTPResponse res = http.send(req);
return res.getBody();
Any help appreciated. I am inexperienced using JSON as well as the Asana API.
The problem was that I was posting to the wrong endpoint. Instead of workspaces/workspaceid/tags, I should have been using /tags and including workspaceid in the body of the request.
Aha, so you can add tags and even set followers despite the API not mentioning that you can or claiming that followers are read-only.
So to sum up for anyone else interested: POSTing to the endpoint https://app.asana.com/api/1.0/tags you can create a tag like this:
{ "data" : { "workspace": 1234567, "name" : "newtagname", "followers": [45678, 6789] } }
where 1234567 is your workspace ID and 45678 and 6789 are your new followers.
Since you posted this question, Asana's API and developer has introduced Tags. You documentation lays out the answer to your question pretty clearly:
https://asana.com/developers/api-reference/tags
I'm a bit confused by your question. Your ask "how to add a tag" but the first half of your question talks about adding a task. The problem with what you describe there is that you are trying to set a task's followers but the followers field is currently read-only according to Asana's API documentation. That is why you are getting an error. You can not set followers with the API right now.
The second part of your question - with the sample code - does look like you are trying to add a tag. However, right now the Asana API does not support this (at least according to the API documentation). You can update an existing tag but you can't add one.
So, to sum up: at this time the API does not allow you to add followers to a task or to create new tags.